Could you explain what is the result (whatis the use) with the persona's ?

I just want to know what is changed (or what is it used for) if I choose a persona ? Is it the "Google" picture which is changed on the startimage ? Or what is it ? Can anyone simply explain this to me ?

Firefox Personas is simply a way for users to personalise their Firefox browser by adding a different look to the Graphical User Interface (GUI).
If yo go to http://www.getpersonas.com/en-US/ and hover a Persona, you will see the changes take effect immediately.
Firefox Personas does not change anything in your browser; it literally jus adds a fancy image to Firefox's window, without distrubing the contens of pages.

Similar Messages

I am planning to buy ipad 2 wifi 3g verizon carrier, will be taking it to india need to know if the same can be used with the local providers there or would the ipad be locked and restricted only to verizon

I am planning to buy ipad 2 wifi 3g verizon carrier, will be taking it to india need to know if the same can be used with the local providers there or would the ipad be locked and restricted only to verizon

I'm fairly sure the Verizon CDMA iPad 2 had no GSM sim slot. So it won't work with any other carrier except Verizon.
As far as the AT&T version goes, it should technically work but will not support 4G/LTE cellular bands.
Given iPad 2's are no longer being sold, I doubt any that could be bought would have a warranty still. Or have at most very little of it left.
Why an iPad 2? its now 3 generations behind the current one.
Perhaps an iPad 4 would be a better choice.

What is the best stylus to use with the iPad Air?

I'm looking for a stylus to use for the iPad Air to use for sketching and just simple note taking And from the reviews I've read it sounded like the Adonit Jot Pro for 29.99 seemed like a good deal to use for the iPad Air. I'm also a worrywart about if it will harm the screen? So I'm looking for someone's review with their experience using "The Adonit Jot Pro on the iPad Air." Thanks so much For your time and review!

I've never had a problem with it. I like it a lot for writing. I like the very fine point. I don't know as it's a great stylus for sketching, though. I tend to do most of my sketching in the app Paper with their Pencil stylus.
When using any stylus, it's good practice to make sure there are no bits of grit on the screen before using. If they should become trapped between the stylus tip and the screen, you could get scratches.

What type of monitors can I use with the Mac Mini?

Hello,
I was thinking on purchasing a Mac Mini. I was not sure if the monitor I have at work with function with the Mac Mini. It is a: 20" ViewSonic Professional Series P815...
Does anyone know if this monitor will work with any Mac Mini? Is there an adapter for it?
Thanks.

It would be fine for them all - all minis have come with DVI video connectors and adapters to convert that to VGA, so aside from the possibility that the Viewsonic might suffer the greyish or dull screen problem that affected a small(ish) proportion of displays with the first generation mini, it should connect up using the adapter just fine, and be correctly recognized by the system.

On a new imac how much of the HDD is already used with the OS,iLife,apps..

Looking to buy my 1st ever iMac, the one Im going to get is the base one, with 250Gb HDD (I may upgrade to 320Gb for UK £29 though)
My question is how much of the HDD is already used by OS X and everything on it? I understand there is some free trial stuff onthat can be installed eg MS Office, iWork etc I would want these removed as wouldnt want them so how much is left before you start adding your own stuff
I also want to install Win XP on it so need to know what to do, 250Gb in todays computing is very stingy I think, so I need an idea
cheers

Here's are some disk usage information from my 20" white C2D. The numbers
are running totals that include periodic software updates and some of my own
stuff -- but that would be less than 0.5 GB of the final total.
OS-X with "no optional packages" is a very usable system; it includes 'core'
applications such as Safari, iTunes, Quicktime. It does not include any of the
iLife apps or the iWork/MS_Office test-drive bloatwares.
The large increase in disk usage for a minimum Leopard system is partly due
to the inclusion of more apps in the 'core' OS package. Some things that were
optional in Tiger have become part of the "minimum" Leopard install.
The Xcode software development tools are a standard part of every OS-X
distribution, but since most customers have no use for them, they're not
included in the factory-installed disk image. If you don't plan to install
them, subtract 3.4 GB from the final tally.
Factory pre-installed Tiger 10.4.8 & bundled software .................. 16.4 GB
Erase & Install Tiger 10.4.8 with NO optional packages .................. 2.9 GB
SoftwareUpdate to 10.4.10, with NO optional packages .................. 3.1 GB
Erase & Install Leopard 10.5.0 with NO optional packages ............... 6.6 GB
SoftwareUpdate (11/11, immediately after Leopard install) ............. 6.7 GB
Install Xcode SW development tools from Leopard DVD ................. 10.1 GB
Install & SoftwareUpdate iLife'08 (except iWeb & GarageBand) ....... 12.3 GB
SoftwareUpdate to Leopard 10.5.1.................................................. 12.5 GB
IMO, 250 GB is FAR more than you'll ever need for installable software plus
a sizeable collection of music/photos. OTOH, no amount of disk space will
ever be enough for an avid music/photo/video junkie, and everyone should
have an external backup drive. So, stick with the standard internal drive and
buy more external storage.
...a billion here, a billion there -- and pretty soon you're talkin' 'bout alot of money,
Looby

Can the usb sync/power cable that came with the iPhone 3g and 4 handle the 2.1 amps drawn by the ipad 2 (if used with the 10w plug) without risk of overheating?

I recently made the mistake of buying a cheap sync cable from a well known auction site becuase I wanted a longer cable than comes in the box for my ipad 2.
Whilst my iPad will sync OK, it takes an age to charge (using the standard 10w plug in the wall). I don't fully understand the science in the cables, but assume it is not a big enough cable to handle the current/2.1 amps?.
If like house wire you send too much current through a cable that is to small for the job it risks overheating and causing a fire.
Does this same principle apply to the iPad power lead?
Anyway back to the question, can I use other leads I have hanging around the house from my previous iphones and ipods to charge my ipad (again still using the 10w plug in the wall) or will the cable in these be too small to handle the 2.1 amps required by the ipad?
I don't want to risk overheating the cables and causing a short to break my beloved iPad 2...!

Thanks for your replies.
Not sure they entirely answer my question though.
I have used my different cables and can see that they are actually working (charging and syncing etc), but am i using old cable that was not intended to draw 2.1 amps and so may overheat and cause damage in the long run?
Or did apple deliberately over engineer the original cables which were only needed to supply 1 amp and they can actually be used to draw 2.1 amps comfortably?
Whilst the 30 pin connectors and usb points are identical, is the internal cable thickness/awg gauge the same?
Thanks

I want to link my Mac Mini through my independent hifi system, which forms part of my home tv system which is the monitor I am using with the Mac Mini. The hdmi cable I am using comes from the receiver of the tv. I cannot get sound from the Mac Mini. Do

I cannot link my new MacMini with my TV's sound system. It's a Pioneer screen & receiver with an independent Pioneer Amp. The Mac Mini does not pick up the sound through the hdmi cable, so how do I get sound going through the MacMini so I can appreciate the music and films I want to hear. Do I need another piece of Apple kit? I have seen 'Express' on Apples web site. Surely I dont have to pay for this as well?
I used to have an Apple TV box which had a seperate audio connection from my Pioneer Amp and it worked great.
Help will be appreciated

The Mac Mini is going to be used for an Internet connection on the Pioneer Plasma/receiver so I can also play stored films from a seperate hard drive. The receiver has an HDMI connection which I have connected the Mac Mini too. the picture is fine, but there is no sound. I have checked the 'sound' settings on the Mac Mini and it registers the Pioneer PDP receiver is connected but states it has no audible connection?

How can I access to the result of query directly with the name of the column without do a search?

hello
I have this line codes, for access to the data of one column
var oDB = xfa.sourceSet.CD;
oDB.open();
oDB.first();
var oRecord = xfa.record.CD;
oRecord.nodes.item(0).value
Is it possible access to the column data that I what with a sentence similar to this?
oRecord.nodes.item('NOMBRE').value);
I know that I can do a for and I can find the exactly row, but I don't want this solution.
Thanks
Hosting Association
The low cost quality hosting
http://www.hostingassociation.biz

This is the solution
var oDB = xfa.sourceSet.CD;
oDB.open();
oDB.first();
var my = xfa.record.CD.resolveNode("NOMBRE");
app.alert(my.value);

Apex report result doesn't agree with the result of sql developer

Hello guys,
at the moment I try to create a standard report which takes his content from several spreadsheets. Because of some problems with the searchbar I'm not able to use an interactive report. The sql query contains a function, which sets some space characters into the content of a column. But there is a big problem. When I call my sql query in apex from the spreadsheets the result doesn't agree with the result which affords the sql developer.
I know that the sql developer affords the right result.
best regards
wderr
Edited by: user9072567 on 07.02.2010 12:57

thats the query:
select "TWORKITEM"."WORKITEMKEY",
"TWORKITEM"."PROJCATKEY",
"TPROJECT"."LABEL",
"TWORKITEM"."PACKAGESYNOPSYS",
replace(replace("TWORKITEM"."PACKAGEDESCRIPTION", chr(10), '<br>'),'<td></td>','<td></td>') packagedesc,
suche_ohne_ti_be("TWORKITEM"."WORKITEMKEY") "CHANGEDESCRIPTION"
from "TWORKITEM" "TWORKITEM", "TPROJECT" "TPROJECT", "TPROJCAT" "TPROJCAT"
where "TWORKITEM"."PROJCATKEY" = "TPROJCAT"."PKEY"
and "TPROJCAT"."PROJKEY" = "TPROJECT"."PKEY"
and (instr(upper("TWORKITEM"."WORKITEMKEY"), upper(nvl(:P10_SEARCHTEXT, "TWORKITEM"."WORKITEMKEY"))) > 0
or instr(upper("TPROJECT"."LABEL"), upper(nvl(:P10_SEARCHTEXT, "TPROJECT"."LABEL"))) > 0
or instr(upper("TWORKITEM"."PACKAGESYNOPSYS"), upper(nvl(:P10_SEARCHTEXT, "TWORKITEM"."PACKAGESYNOPSYS"))) > 0
or instr(upper("TWORKITEM"."PACKAGEDESCRIPTION"), upper(nvl(:P10_SEARCHTEXT, "TWORKITEM"."PACKAGEDESCRIPTION"))) > 0
or instr(upper(suche_ohne_ti_be("TWORKITEM"."WORKITEMKEY")), upper(nvl(:P10_SEARCHTEXT, "TWORKITEM"."WORKITEMKEY")))>0
I mean with spreadsheets some tables/charts. And I take those informations from 3 of them.
regards
wderr

Can the camera connector be used with nano 1st gen

As subject states, can the camera connector be used with the Nano??
Many thanks!!

The camera connector cannot be used with the iPod
nano; it is only compatible with the iPod photo, iPod
with color display, and Fifth Generation iPods out of
those released so far.
(16782)
Ok thanks, but the Nano does have a Does a colour screen and can also store photos.
Not that i dissagree with what your saying, its just strange!

Could you explaine me what is the diffternce between APO VMI Vs R/3 VMI ?

Hi Experts,
could you explaine me what is the diffternce between APO VMI Vs R/3 VMI ?
Thanks
babu

Hi,
VMI is Vendor managed Inventory. APO can plan for VMI scenario. In a situation, when the stock level at the end customer is known to APO , then APO can plan the requirements at the customer level.
The aim of vendor-managed inventory (VMI) is to integrate key customers in supply chain planning. The customer regularly sends stock and sales data to the vendor, and based on that information, the vendor determines replenishment requirements for the customer
VMI as a concept must be same in APO and R/3. But, such planning is possible in APO. I am not sure whether it can be done in R/3 system.
Regards,
Samir Baruah

HT4623 I bought this iPhone from a guy and later on he passed away in Syria , after that , I tried to update the soft ware to ISO 7 but the system asked me for the old owner's information which I do not know so could you please advice me on that , what c

I bought this iPhone from a guy and later on he passed away in Syria , after that , I tried to update the soft ware to ISO 7 but the system asked me for the old owner's information which I do not know so could you please advice me on that , what can I do to reactivate the device ?

You cannot reactivate the device without knowing the previous owner's information. This is the new antitheft measure built into the iPhone.
There's nothing you can do. You'll need to purchase a new phone.

Could you explain how the read-write-backing-map-scheme is configured in...

Could you explain how the read-write-backing-map-scheme is configured in the following example?
<backing-map-scheme>
    <read-write-backing-map-scheme>
     <internal-cache-scheme>
      <class-scheme>
       <class-name>com.tangosol.util.ObservableHashMap</class-name>
      </class-scheme>
     </internal-cache-scheme>
     <cachestore-scheme>
      <class-scheme>
       <class-name>coherence.DBCacheStore</class-name>
       <init-params>
        <init-param>
         <param-type>java.lang.String</param-type>
         <param-value>CATALOG</param-value>
        </init-param>
       </init-params>
      </class-scheme>
     </cachestore-scheme>
     <read-only>false</read-only>
     <write-delay-seconds>0</write-delay-seconds>
    </read-write-backing-map-scheme>
</backing-map-scheme>
...Edited by: qkc on 30-Nov-2009 10:48

Thank you very much for reply.
In the following example, the cachestore element is not specified in the <read-write-backing-map-scheme> section. Instead, a class-name ControllerBackingMap is designated. What is the result?
If ControllerBackingMap is a persistence entity, is the result same with that of cachestore-scheme?
<distributed-scheme>
            <scheme-name>with-rw-bm</scheme-name>
            <service-name>unlimited-partitioned</service-name>
            <backing-map-scheme>
                <read-write-backing-map-scheme>
                    <scheme-ref>base-rw-bm</scheme-ref>
                </read-write-backing-map-scheme>
            </backing-map-scheme>
            <autostart>true</autostart>
        </distributed-scheme>
        <read-write-backing-map-scheme>
            <scheme-name>base-rw-bm</scheme-name>
            <class-name>ControllerBackingMap</class-name>
            <internal-cache-scheme>
                <local-scheme/>
            </internal-cache-scheme>
        </read-write-backing-map-scheme>

I want to set up the Time Machine and I would love to use the Time Capsule but since I already have a wireless router I need suggestions on what other external disks Apple could recommend to use with the Time Machine and how to configure that disk

I want to set up the Time Machine and I would love to use the Time
Capsule but since I already have a wireless router I need suggestions on
what other
external disks Apple could recommend to use with the Time Machine and
how to configure that disk.
A complication that I need to resolve is the fact that I am using Vmware
Fusion to be able to use Windows on my Mac. Now it seems that Time
Machine is not backing up my files
on that virtual Windows without additional configuration and my question
is whether you can advise me here or whether this is only a matter for
the Fusion virtual machine.

If you want to use Time Capsule you can.. you simply bridge it and plug it into the existing router.. wireless can be either turned off or used to reinforce the existing wireless.. eg use 5ghz in the TC which is much faster than your 2.4ghz.
You can also use a NAS.. many brands available but the top brands are synology, qnap and netgear readynas series. These will all do Time Machine backups although how well always depends on Apple sticking to a standard. There are cheaper ones.. I bought a single disk zyxel which was rebadged and sold through my local supermarket. It actually works very well for TM at least on Snow Leopard. Major changes were made in Lion and again ML so do not instantly think it will work on later versions. I haven't tried it yet with those versions.
Any external drive can be plugged into the mac. Use the one with the fastest connection or cheapest price according to your budget. USB2 drives are cheap and plentiful. But no where near as fast as USB3 or FW800. So just pick whichever suits the ports on your Mac. Interesting Apple finally moved to USB3 on their latest computers.
TM should exclude the VM partition file.. it is useless backing it up from Mac OS side.. and will slow TM as it needs to backup that partition everyday for no purpose.. TM cannot see the files inside it to backup just the changes.
You need to backup windows from windows. Use MSbackup to external drive.. if you have pro or ultimate versions you can backup to network drive. But MSbackup is a dog.. at least until the latest version it cannot restore the partition without first loading windows. There are about a zillion backup software versions for windows.. look up reviews and buy one which works for you. I use a free one Macrium Reflect which does full disk backups and is easy to restore.. to do incremental backups though you have to pay for it.

My school has a website. The professor uploads files in Word. When I click on the link at home using Pages, the download window opens with nothing in it and Safari opens with a blank in the address book. What Could be wrong? Wrong set up?

My school has a website. The professor uploads files in Word. When I click on the link at home using Pages, the download window opens with nothing in it and Safari opens with a blank in the address book. What Could be wrong? Wrong set up?

Hi Jo,
If I'm interpreting this correctly, the Word file downloads correctly, but when you open it in Pages, the link(s) which your instructor has embedded in the Word file are not correctly translated into Pages.
If the link shows the actual address, you should be able to copy that and paste it into the location bar in Safari, press return, and get to the website that way.
An alternate route might be to download one of the open source Office applications, OpenOffice.org, LibreOffice, or NeoOffice. These are written to more closely emulate the behaviours of MS Word than Pages, and may provide better support for links embedded in Word files.
Regards,
Barry

HT1284 Can I back up my Mac and my pc to the same external hard drive? If so, could you explain how? Thanks.

Can I back up my Mac and my pc to the same external hard drive? If so, could you explain how? Thanks. I am a new user with mountain lion.

You could partition the drive into 2 partitions. One formatted as HFS+ for Mac OS X back, and one formatted as NTFS for Windows backup.
You would have to move the drive from system to system to do your backups. If there are 2 systems, I would suggest just getting separate drives for each, unless they are both laptops, then you will be disconnecting the drives all the time anyway.
Unless Windows is running in a virtual machine on your Mac. Then a partitioned drive would be fine.

Could you explain what is the result (whatis the use) with the persona's ?

Similar Messages

Maybe you are looking for