Could you guide settings for GWI with MS Outlook for CRM 7.0 .

Dear Experts,
Could you explaine the settings for GWI with MS Outllok for SAP CRM 7.0 and what are pre requests we need.
1. How to install this Add on in CRM 7.0 and which version is support for CRM 7.0.
2. How to set up (configure) in crm 7.0 and MS out look.
3. As per my knowledge from MS to CRM its bidorectional data flow isu2019t true?
4. Can we get masterdata like Accounts and Products in MS Out look tool?
5. How we can map activity from MS out look to CRM?
Regards,
Jemmi.

Hello Jemmi,
a lot of questions
Here some answers:
1. You do not have to install the add-on to CRM. It is a add-on to outlook. Just start the setup.exe you downloaded from the marketplace and select MS-Outlook and your language.
2. In CRM70 customizing search for "client profile" - here you will be able to customize for different businessroles different GWI settings. The settings will be synchronised to the client. You will not need to do settings on the client.
3. Biderectional is theoretically possible. We only use CRM to Outlook. If you do it the other way round you have to think about obligatory fields in CRM and where do you get the account ID from and and and. CRM to Outlook is simple.
4. Accounts and Products i guess no in standard. But contact persons is possible, appointsments and tasks are also possible.
5. No answer, we do not use this.
I hope this helps.
Good luck.
Kind regards
Manfred

Similar Messages

Could you guide the settings for GWI with MS Outlook for CRM 7.0 .

Dear Experts,
Could you explaine the settings for GWI with MS Outllok for SAP CRM 7.0 and what are pre requests we need.
1. How to install this Add on in CRM 7.0 and which version is support for CRM 7.0.
2. How to set up (configure) in crm 7.0 and MS out look.
3. As per my knowledge from MS to CRM its bidorectional data flow isu2019t true?
4. Can we get masterdata like Accounts and Products in MS Out look tool?
5. How we can map activity from MS out look to CRM?
Regards,
Jemmi.

Please see my answer to your identical threat in forum Webclient UI.
Please open your questions only in one forum.
Kind regards
Manfred

HT2496 good day, could you guide me on how to add more dictionary in my Macbook pro

good day, could you guide me on how to add more dictionary in my Macbook pro

You'll have to use iTunes on your computer or buy music using the iTunes app on your phone.
Check these articles for more info:
iOS: Syncing with iTunes
iTunes: Syncing media content to iOS devices and iPod
iTunes on your MacBook can import music files or your CD's into the iTunes library. After that you can sync the content of the iTunes library on your Mac to your phone.

Hello! Could you tell me which configuration is the best for graphic works, like making large POSTERS or BANNERS (for instance 2800X500 cm)???

Hello! Could you tell me which configuration is the best for graphic works, like making large POSTERS or BANNERS (for instance 2800X500 cm)???

scorpiorey wrote:
I just create file and send it to printer-house.
Never done that size files (posters) before, so, didn't know it would be such problem.
Model Name:          MacBook Pro
Model Identifier:          MacBookPro8,1
Processor Name:          Intel Core i7
Processor Speed:          2.8 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache (per Core):          256 KB
L3 Cache:          4 MB
Memory:          4 GB
Boot ROM Version:          MBP81.0047.B24
SMC Version (system):          1.68f98
this is what i have. now i know that it's not enough
If that's what you're using and it actually works, albeit slowly, I'd suggest taking The hatter's advice and go with the 6 core Mac Pro with 24GB of RAM and the 5870 video card. The RAM could come from here: http://eshop.macsales.com/shop/memory/Mac-Pro-Memory#1333-memory

Could you please tell me where can I ask for the S-User ID and password

Dear SAP Experts,
I passed the SAP exam (ABAP with SAP NetWeaver7.0) on August 20,2009
and receieved the Certificate document from SAP.
Unfortunately,I didnot do any project on sap.
Until Last Week,I have the chance to do it.
so I have to visite SAP sites ,
but It must use the S-User ID and password.
Could you please tell me where can I ask for it.
Best regards,
LiYing.

hi,
after compelting the certiification sap will provide the suser is and password along with sap certificate, generally it will take 4 -5 weeks to get the certificate if u still not received contact sap education locally
regards,
ram

Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize your folders with your Outlook data file (.ost)

Fresh installation of Exchange Server 2013 on Windows Server 2012.
Our first test account cannot access their email via Outlook but can access fine through OWA. The following message appears - "Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize
your folders with your Outlook data file (.ost)" is displayed.
If I turn off cached Exchange mode, setting the email account to not
cache does not resolve the issue and i get a new error message - "Cannot open your default e-mail folders. The file (path\profile name).ost is not an Outlook data file (.ost). Very odd since it creates its own .ost file when you run it for the first
time.
I cleared the appdata local Outlook folder and I tested on a new laptop that has never connected to Outlook, same error message on any system.
Microsoft Exchange RPC Client Access service is running.
No warning, error or critical messages in the eventlog, it's like the healthiest server alive.
Any help would be greatly appreciated. I haven't encountered this issue with previous versions of Exchange.

So it looks like a lot of people are having this issue and seeing how Exchange 2013 is still new (relatively to the world) there isn't much data around to answer this. I've spend ALOT of time trying to figure this out.
Here is the answer. :) - No I don't know all but I'm going to try to give you the most reasonable answer to this issue, in a most logical way.
First thing I did when I was troubleshooting this issue is that I ignored Martina Miskovic's suggestion for Step4 http://technet.microsoft.com/library/jj218640(EXCHG.150)because it didn't make sense to me because I was trying to connect
Outlook not outside the LAN but actually inside. However, Martina's suggestion does fix the issue if it's applied in the correct context.
This is where the plot thickens (it's stew). She failed to mention that things like SSL (which I configure practically useless - anyone who ever worked in a business environment where the owner pretty much trusts anyone in the company, otherwise they don't
work there - very good business practice in my eyes btw, can confirm that...) are some sort of fetish with Microsoft lately. Exchange 2013 was no exception.
In exchange 2003, exchange 2007 and exchange 2010 - you could install it and then go to outlook and set it up. And when outlook manual Microsoft Exchange profile would ask you for server name, you would give it and give the name of the person who you setting
up - as long as machine is on the domain, not much more is needed. IT JUST WORKS! :) What a concept, if the person already on premises of the business - GIVE HIM ACCESS. I guess that was too logical for Microsoft. Now if you're off premises you can use things
like OutlookAnywhere - which I might add had their place under that scenario.
In Exchange 2013, the world changed. Ofcourse Microsoft doesn't feel like telling it in a plain english to people - I'm sure there is an article somewhere but I didn't find it. Exchange 2013 does not support direct configuration of Outlook like all of it's
previous versions. Did you jaw drop? Mine did when I realized it. So now when you are asked for your server name in manual outlook set up and you give it Exchange2013.yourdomain.local - it says cannot connect to it. This happens because ALL - INTERNAL AND
EXTERNAL connection are now handled via OutlookAnywhere. You can't even disable that feature and have it function the reasonable way.
So now the question still remains - how do you configure outlook. Well under server properties there is this nice section called Outlook anywhere. You have a chance to configure it's External and Internal address. This is another thing that should be logical
but it didn't work that way for me. When I configured the external address different from the internal - it didn't work. So I strongly suggest you get it working with the same internal address first and then ponder how you want to make it work for the outside
users.
Now that you have this set up you have to go to virtual directories and configure the external and internal address there - this is actually what the Step 4 that Martina was refering to has you do.
Both external and internal address are now the same and you think you can configure your outlook manually - think again. One of the most lovely features of Outlook Anywhere, and the reason why I had never used it in the past is that it requires a TRUSTED
certificate.
See so it's not that exchange 2013 requires a trusted certificate - it's that exchange 2013 lacks the feature that was there since Windows 2000 and Exchange 5.5.
So it's time for you to install an Active Direction Certificate Authority. Refer to this wonderful article for exact steps - http://careexchange.in/how-to-install-certificate-authority-on-windows-server-2012/
Now even after you do that - it won't work because you have to add the base private key certificate, which you can download now from your internal certsrv site, to Default Domain Policy (AND yes some people claim NEVER mess with the Default Domain Policy,
always make an addition one... it's up to you - I don't see direct harm if you know what you want to accomplish) see this: http://technet.microsoft.com/en-us/library/cc738131%28v=ws.10%29.aspx if you want to know exact steps.
This is the moment of ZEN! :) Do you feel the excitement? After all it is your first time. Before we get too excited lets first request and then install the certificate to actual Exchange via the gui and assign it to all the services you can (IIS, SMTP and
there is a 3rd - I forgot, but you get the idea).
Now go to your client machine where you have the outlook open, browse to your exchange server via https://exchang2013/ in IE and if you don't get any certificate errors - it's good. If you do run on hte client and the server: gpupdate /force This will refresh
the policy. Don't try to manually install the certificate from Exchange's website on the client. If you wanna do something manually to it to the base certificate from the private key but if you added it to the domain policy you shouldn't have to do it.
Basically the idea is to make sure you have CA and that CA allows you to browse to exchange and you get no cert error and you can look at the cert and see that's from a domain CA.
NOW, you can configure your outlook. EASY grasshoppa - not the manual way. WHY? Cause the automatic way will now work. :) Let it discover that exachange and populate it all - and tell you I'm happy! :)
Open Outlook - BOOM! It works... Was it as good for you as it was for me?
You may ask, why can't I just configure it by manual - you CAN. It's just a nightmare. Go ahead and open the settings of the account that got auto configed... How do you like that server name? It should read something like [email protected]
and if you go to advanced and then connection tab - you'll see Outlook Anywhere is checked as well. Look at the settings - there is the name of the server, FQDN I might add. It's there in 2 places and one has that Mtdd-something:Exchange2013.yourdomain.local.
So what is that GUID in the server name and where does it come from. It's the identity of the user's mailbox so for every user that setting will be different but you can figure it out via the console on the Exchange server itself - if you wish.
Also a note, if your SSL certs have any trouble - it will just act like outlook can't connect to the exchange server even though it just declines the connection cause the cert/cert authority is not trusted.
So in short Outlook Anywhere is EVERYWHERE! And it has barely any gui or config and you just supposed to magically know that kind of generic error messages mean what... Server names are now GUIDs of the [email protected] - THAT MAKES PERFECT
SENSE MICROSOFT! ...and you have to manage certs... and the only place where you gonna find the name of the server is inside the d*** Outlook Anywhere settings in the config tab, un it's own config button - CAN WE PUT THE CONFIG ANY FURTHER!
Frustrating beyond reason - that should be Exchange's new slogan...
Hope this will help people in the future and won't get delete because it's bad PR for Microsoft.
PS
ALSO if you want to pick a fight with me about how SSL is more secure... I don't wanna hear it - go somewhere else...

How to Control authorization for users with certain status for level 2 WBS Element

Dear All,
Is there any standard way or enhancement available to control authorization for users with certain status for WBS Element i.e. for example
Pre-requisite:
There is only 2 level of project i.e.
Lev_ WBSE_______Description
1___ 7-14.E_______summay outage controller
2___ 7-14.E.2310__ Plant/unit # 2310
2___ 7-14.E.2310__ Plant/unit # 2220
Project Controller (authorization role assigned "Z_PS_OP7_OTGCON_C") have all project level authorization
Plant/Unit Controller (authorization role assigned "Z_PS_OP7_PLNTOTG_C_2310") have only level 2 authorization with enhancement that we did in system by Z table.
User ID_ Plant #
123345_ 2310
122455_ 2220
Issue:
After System Status released and User Status approved the WBS basic date for Plant/Units should be restricted from updating/changing by Plant/Unit Controller level and only project controller should have this authority.
Solution required:
Can any one tell how to control this scenario either by standard or enhancement available to control authorization
BR
Saqib Usman

Hi,
Did you explore SAP Enhancement CNEX0002 Using Transaction CMOD?
Thank you and regards,
Varshal Kachole
The SCN Rules of Engagement

How could you install 10g R2 Db EE using containers for Solaris?

Do you know if there is a particular procedure in order to have my installation using Solaris' containers?
First of all, what is a container for Solaris?
Please could you give a reference to read about it?
Thank you.
Paola
: (

Hello Madrid!:
My Oracle´s hero!, your are always a leader for us, the dbas who have just one passion talking about databases: Oracle.
Well It is going to be hard, because I am not only installing Oracle inside a Solaris container but also migrating from Sybase to Oracle!
But again I am acting as a leader, and being woman it is more difficult. I hope that I can see you later, in a course again, but it could be, at the end of this year, because I am not going to be in Mexico City, I am now studying Sybase in order to convert all the dbs to Oracle. I have already installed successfully with your recommendations. You are perfect.
c u later my favorite OCM. I insist, what a beautiful last name you have.
Paola.
8 ) (wearing glasses)

I get "overLIB 4.10 or later is required for the CSS Style Plugin" every time I open certain sites, could you tell me what I need to do for this? Thank you.

I get "overLIB 4.10 or later is required for the CSS Style Plugin" on certain websites, could you please advice me as to what to do to stop this window from popping up?
Thank you

Troubleshooting Plugins
https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins
Check and tell if its working.

HT5312 Could you reset my Security Questions with all answers as NONE

I want to change my password of the Apple Account. However, I was not allowed before answering correctly the two so called Security Questions. I totally forgot what are the answers as my account was created years ago. This is quite absurb as I can remember the password of my account but could not remember the answers of the security questions. So, could you reset the answers of all the security questions of my account as NONE? Thanks.

We are fellow users here on these forums, you're not talking to iTunes Support.
The page that you’ve posted from has instructions for how to reset them i.e. if you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then steps 1 to 5 half-way down that page should let you reset them.
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use

Can you sync your iPod touch with computer 1 for computer 1's iCal items and also sync the same iPod touch with computer 2 for computer 2's music, apps, etc. items?

I have a MacBook Pro through my college, and I have all my iCal items on that computer, but I have all my music, apps, etc. on a PC desktop that is my personal home computer. I am wondering if I can sync my iPod touch with my MacBook for the iCal items and also with my PC for the music and such without loosing either of the two when trying to sync with the other computer?

Have a look Here > Managing content manually
From Here > http://www.apple.com/support/iphone/syncing/

How to change HR assignment for BP with employee role in CRM

Hi,
we download employees from R3 HR into CRM. By mistake, some duplicates BP were created. we want to change the assignment with the BP employee in CRM and the employee in R3. In other word, to remove the personnel number ID stored in CRM and to add this personnel ID to others BP in CRM.
For example:
In CRM, BP 100 does not have a personnel number assigned to his employee role.
In CRM, BP 101 (duplicate of BP 100) is assigned to the personnel number 345 from the employee in R3.
We'd like to assign the personnel number 345 to BP 100 and remove the link with HR in BP 101.
is it possible? where is this assignment stored - In R3&HR or in CRM?
can you guys share your experience on how to resolve this
thanks in advance
Stephanie
Edited by: Stephanie Blouin on May 6, 2008 2:16 PM

Hi,
We can assing the CC in two ways.
1. is for position.
2. or for a Org unit.
In your case if it is for Position. GOTO PP02 enter the details as
Plan Version    HI
Object Type     s
Object ID       50018133
Object abbr.
Infotype        1001
Subtype         A011
Planning status 1
Validity        06/23/2008 to     12/31/9999
Data sample.
Then goto change and change the CC. this will also updates the IT0001.
If not, You can also change through Org unit.
Where goto PPos_old> select the org unit> then goto staff assignments> select the required position> and there is a option called goto from top menu> there you can check accoutn assignment> there you will get diff screen to be displayed--> there select the position if you want to change and select the option maste cost center and change the CC by giving dates, this will also updates the IT0001.
Reward me if hleps.
Thanks,
Vasu.

I have a laptop with microsoft outlook for work emails, and an ipad (with IOS 7.1) and an i-phone with ios 7.0.6 currently. Since about 2 weeks ago, I now get all spam emails coming to my aple device inbox.

In other words, my outlook email account correctly identifies spam email and places it automatically into my spam inbox on outlook, but with my iphone and ipad, all the apm emails as well as my "good" emails are coming into my inboxes on my apple devices. In other words, they are not correctly synconising with my outlook inbox? They have all worked happily in tandem for a few years, but recently, they have stopped synchronising incoming email and I now get hundreds of spam email downloading onto my apple devices where as before this didn't happen. Any explanations? solutions?
Duncan

In other words, my outlook email account correctly identifies spam email and places it automatically into my spam inbox on outlook, but with my iphone and ipad, all the apm emails as well as my "good" emails are coming into my inboxes on my apple devices. In other words, they are not correctly synconising with my outlook inbox? They have all worked happily in tandem for a few years, but recently, they have stopped synchronising incoming email and I now get hundreds of spam email downloading onto my apple devices where as before this didn't happen. Any explanations? solutions?
Duncan

How add Authorization check for user with assigened role for t.code-MIR4

Hi All,
Regarding authorization how to check authorizations check for user whith assigned roles for the t.code MIR4 using ABAP.
In Detail:2) All users are allowed to go to MIR4(invoice number), But ONLY for users with role: MM_RELEASE_INVOICE can proceed to do the posting.
suggest me...
Thanks,
srii..

Hi Sri ,
first u need to find out in which user rules u are using this object , after that if u want to restrict users then remove create/change values from that object values .
make use of Tcode SUIM to find out all roles which are using this Object.
or
ask ur basis guy to remove authorizations to create/change....
regards
Prabhu

How Do i sync office for mac with contacts,calendars for mac

I am trying to integrate the MS office for mac and the standard mac calendar and contacts. i would like them to sync as i use outlook for emails and Calander in mac and appointments don't sync nor can i get the contacts to sync.
Please help

Sim[le answer is that you can't. Unless and until Microsoft add the functions needed to Outlook. Right now if you want to sync Microsoft Outlook you'll need to use Microsoft Exchange

Could you guide settings for GWI with MS Outlook for CRM 7.0 .

Similar Messages

Maybe you are looking for