Could you guide the settings for GWI with MS Outlook for CRM 7.0 .
Dear Experts,
Could you explaine the settings for GWI with MS Outllok for SAP CRM 7.0 and what are pre requests we need.
1. How to install this Add on in CRM 7.0 and which version is support for CRM 7.0.
2. How to set up (configure) in crm 7.0 and MS out look.
3. As per my knowledge from MS to CRM its bidorectional data flow isu2019t true?
4. Can we get masterdata like Accounts and Products in MS Out look tool?
5. How we can map activity from MS out look to CRM?
Regards,
Jemmi.
Please see my answer to your identical threat in forum Webclient UI.
Please open your questions only in one forum.
Kind regards
Manfred
Similar Messages
-
"Could not retrieve the settings for endpoint monitoring."
So my VMs are hosed because suddenly Azure cannot retrieve the settings for endpoint monitoring. If I try to start the VMs, it fails for this reason. If I try to configure the VMs, it fails for this reason. When I look at ENDPOINT MONITORING
under CONFIGURE it constantly says "Loading..." This all began when today I tried to switch a VM from STANDARD to BASIC configuration. Now I can't start any VM.Once I powered off the VM there was no starting it again, even after switching back to STANDARD config. Same "Could not retrieve the settings for endpoint monitoring" error every time. I gave up, duplicated the disk, and created a
new VM from scratch, which has no issue with endpoint monitoring. Ridiculous that I had to do that. Azure continues to be as brittle and unreliable as a drunk monkey. -
Can you sync the i-phone 4s with microsoft outlook 2007
can you sync the i-phone 4s with microsoft outlook 2007 on a Windows xp platform?
Hello BoilerMike57,
According to iOS: How to transfer or sync content to your computer (http://support.apple.com/kb/HT1296), you are able to use Outlook 2007 to sync your iPhone:
You can sync calendars with:
Microsoft Outlook 2003, Microsoft Outlook 2007, Microsoft Office 2010 (Windows XP, Windows Vista, or Windows 7)
If you are having trouble syncing your Outlook calendar with your iPhone, you can follow the steps in this article:
iPhone, iPad, iPod touch: Troubleshooting contact and calendar syncing via USB on Windows
http://support.apple.com/kb/HT1692
Thank you for posting in the Apple Support Communities.
Best,
Sheila M. -
When I opened the app I selected do not allow, to use my contacts, but now realise I should have allowed it. I have uninstalled and reloaded it, but it will not ask me to use my contacts again. Any ideas as now I see e mail names and not just the persons name.
If you go to Settings > Notes > Default Account you will see "On My iPhone" as the default account and the only choice if you have not enabled syncing Notes in Settings >iCloud or Settings > Mail, Contacts, Calendars. If you have enabled syncing you can still select "On My iPhone" as the default account. When you are in the Notes app you won't see any accounts listed if you have not enabled syncing because they are all in the On My iPhone account and that is the only place possible. It is not a folder that you create.
-
Can you adjust the settings for Small Caps
Just curious...
In every other Adobe program you can control the "ratio" of the small caps function by percentage. (The small cap is 80% of the large cap, etc)
I'm not seeing where I can adjust this vital setting in Photoshop, any version.
Help appreciated.Smart objects from IND is one workaround. Set type in IND, export as PDF, and place PDF as smart object in PS. You should be able to edit using any PS effects you need. If the type is still editable as PS type, then the smart object equivalent should be editable as well.
To edit the smart object, go back to IND, tweak the type, re-export PDF, and then replace the smart object contents in PS with the updated PDF. Six clicks and presto! :)
This seems a three-sides-of-the-square solution. Why you can't edit the PDF in Acrobat is beyond me. Not like I'm using the workflow in production or anything... maybe someone has a better way.
ed: warp text is a bust. Maybe you're just better off making your own small caps...
:D
J -
Could you guide settings for GWI with MS Outlook for CRM 7.0 .
Dear Experts,
Could you explaine the settings for GWI with MS Outllok for SAP CRM 7.0 and what are pre requests we need.
1. How to install this Add on in CRM 7.0 and which version is support for CRM 7.0.
2. How to set up (configure) in crm 7.0 and MS out look.
3. As per my knowledge from MS to CRM its bidorectional data flow isu2019t true?
4. Can we get masterdata like Accounts and Products in MS Out look tool?
5. How we can map activity from MS out look to CRM?
Regards,
Jemmi.Hello Jemmi,
a lot of questions
Here some answers:
1. You do not have to install the add-on to CRM. It is a add-on to outlook. Just start the setup.exe you downloaded from the marketplace and select MS-Outlook and your language.
2. In CRM70 customizing search for "client profile" - here you will be able to customize for different businessroles different GWI settings. The settings will be synchronised to the client. You will not need to do settings on the client.
3. Biderectional is theoretically possible. We only use CRM to Outlook. If you do it the other way round you have to think about obligatory fields in CRM and where do you get the account ID from and and and. CRM to Outlook is simple.
4. Accounts and Products i guess no in standard. But contact persons is possible, appointsments and tasks are also possible.
5. No answer, we do not use this.
I hope this helps.
Good luck.
Kind regards
Manfred -
the cover i bought is from the brand called iPearl and it supports the auto sleep/wake lid action but i cant find the settings for it in my settings>general. now my iPad wont sleep when i close the lid. how do i find the option for this action in my settings on my ipad?
The setting should only appear with the cover installed. Try settings> general> IPad cover lock/unlock> on. Thanks go to Diavonex and Chris CA from this earlier thread.
The sleep/wake function would not show in general to turn it on. I have a Targus case but the function will not work. What's going on? -
I down loaded the new free os x yosemite today and now my mail is offline. Several pop ups that say there is no connection.
Verify the settings for account or try again.
The server returned the error: The certificate for this server is invalid.
I have not changed a thing and now I have no emails coming or going. Since it is my communication line to many of my clients, I am in need of some answers asap.
Thank you.I recently have been trying to find out why my email won't go online. A window pops up stating The identity of "pop.qwestoffice.net" cannot be verified. The certificate for this server is invalid. You may be connecting to a server that is pretending to be "pop.qwestoffice.net" putting information at risk. It asks to connect anyway? Anyone out there have a clue? I am losing my contacts with my clients.
-
After upgrade my Iphone 4 to iso5, I can't add contact and I can't access the settings for mail,contacts and calender. The moment I select the setting for Mails, Contact and Calender it will jump back to home. Can someone advice what's wrong with it?Problr
Dear All
i have done the same activity ( buy a new iphone 4 -> upgrade to ios5 - > configure email) with success-
than when i start to move the contacts from old mobile to iphone (using the microsim) i receive the same crash
in disgnosis e use i saw 2 dump with this title 'latestCrash-Preferences.plist and LatestCrash.plist. in each file the date is the same and i read:
Exception Tyle: EXC_CRASH (SIGABRT)
Exception code: 0x00000000, 0x00000000
Chrashed Thread: 6
in thread 6: name: Dispatch queue:
com.apple.addressBookUI.ContactsSettingPlugin
and thaan a lot of data.
Have you any idea?
thank in advance
Fabio -
Sync message, "You have changed the settings for your iphone. Would you like to apply these changes?" What does this mean? I don't recall changing anything...
The main settings that are changed in these cases can be found in this article:
http://support.apple.com/kb/ht1386
To ensure you don't lose any data you don't want taken off, ensure that each Summary, Apps, Music, Movies, TV Shows, Podcasts, iTunes U, Books, & Photos have the settings you would prefer on the computer.
If anything gets changed on any of those pages, you will be prompted with that message. If they look fine, especially after adding some media like songs or videos, then you can apply the changes without fear. -
Constant "you have changed the settings for the iphone" in iTunes
On my iPhone 4, I can sync my phone with no issues, and when the sync is done and I switch over to the iTunes store or my library, it always pops up with "You have changed the settings for the iphone "my iPhone". Would you like to apply these settings?"
I can hit apply, go to something different, come back, do nothing but sync my phone again, and as soon as I switch back to something else, I get the message again...
I didn't change anything, but it keeps saying I have?Wow...
That is pretty bad...
From what I've gathered. There has been an increasing number of issues ever since iTunes 9 and more problems with iOS4 for the non iPhone 4 users.
It's such a shame because I used to actually comment on how iTunes worked seamlessly and so quickly. This actually feels as if I'm running a typical bloated windows software now. [And to my great surprise, an equal number of people using iTunes on MacOS have given the same kind of feedback. I originally thought it was restricted to just windows users.] -
With certain movies I have downloaded digitally through Itunes or certain movies through Netflix played through Apple TV, I am only getting partial sound. I am missing one or more sound tracks. Am I missing something in the settings for Apple TV?
Are you using a stereo receiver or surround sound system for the audio by chance. What you are describing sounds like a receiver that is not setup correctly, or does not have the speakers connected to it correctly to support Dolby surround, 5.1 or 7.1. Which is why it is only happening on some content. It would only be on the ones that are encoded to support Dolby audio.
-
When I sync ical on iphone with mac, every entry is multiplied. What are the settings for syncing without repeats?
If your wireless environment is less than ideal, as it is in most inhabited areas, the influence of other wireless networks and devices competing for the same very small portion of the electromagnetic spectrum will affect your network's performance. Your own wireless network is a microcosm of that environment.
To mitigate the effects of competing wireless networks, use 5 GHz to the maximum practicable extent. It is comparatively free from interference contributed by other wireless devices and is likely to remain that way for some time. However, it is less tolerant of intervening obstructions and construction materials than the 2.4 GHz spectrum, so it's not a panacea. Every installation is different so you must experiment to determine the optimum configuration.
Place your wireless router (what kind is it?) in a central location, convenient to all the devices that require it. Most of the time a utility or ISP will locate it in some remote corner next to the utility service entrance. That is almost always the worst possible location.
Others find that only a direct wired Ethernet connection between router and devices will maintain uninterrupted access to Airplay.
That is almost certain to result in the best possible AirPlay performance. Short of having everything hard wired (it's not an option for the iPad for example) use an Ethernet connection for all the devices that lend themselves to that method. Your AppleTV is certainly one of them, since its location is not likely to change very often. Your AirPort Express should be another, since your audio systems are likely to stay put as well. Connect them both to your existing router, either directly or through an inexpensive Ethernet switch. Your problems are likely to be solved with just those two connections. -
OS10.6.8, Firefox 24.0
The new Yahoo mail shows no graphics using Firefox 24.0 - just identical rectangles where new icons should be.\. However, the new Yahoo mail displays correctly in Safari and Chrome. I believe this has to to with the settings for Javascript. Those settings aren.t easy to access in the most recent Firefox 24.0 version. Help me, please.The settings for Javascript are either on or off, Fireefox 24 doesn't give you a option to turn off Javascript, unless you installed something like NoScript extension (or some other Javascipt blocking add-on)
If NoScript, then you need to use the View > Toolbars > Customize and drag the NoScript "Temp Allow All" button to the toolbar area to enable all enabled scripts (including Javascript) on that web page.
Under the Firefox Help menu is a option to restart with add-ons disabled to see if something you might have installed is causing your problem.
Reinstall Firefox or create another user account and run Firefox there to try to localize your issue.
I'm having no problem here on 10.6.8 in Firefox, Chrome or Safari, Yahoo Mail works perfectly. -
I can send but cannot recieve email
This is the messege I am gewtting:
There may be a problem with the mail server or network. Verify the settings for account “MobileMe” or try again.
The server returned the error: Mail was unable to log in to the IMAP server “p02-imap.mail.me.com” using “Password” authentication. Verify that your account settings are correct.
The server returned the error: Service temporarily unavailableAlso if I go to system preferences accounts and re-enter the password it fixes the glitch sometimes.
Maybe you are looking for
-
Trying to get all music from ipod touch transferred to new laptop!
i only have my ipod touch, my old computer, and my new laptop. how do i get all the music to transfer from my ipod touch to my new laptop? i seem to only be able to transfer the few songs that ive purchased but i want to move my whole ipod library
-
A network error when i tested the connection of a proxy user
Good evening I 'd created a 3 appliances Filer system . Filer 1.1.0.653 The Filr Apl is in DMZ and every ports are open between it and the 2 Windows boxes (AD and File Sharing) Every thing seems well. I could inport AD users, create filr users, and w
-
Is this a Flash 8 bug? - Variable Freakout
Ok, this doesn't make sense at all - here is my set up: in a root MC, I have 4 layers - all 1 frame each. The 1st layer is an actions layer which defines 3 very simple variables: quote: var pressCheck1 = 0; var pressCheck2 = 0; var pressCheck3 = 0; t
-
Initialize ITEMs on page render
I have a page that contains several charts that are dependant on two items: P1_FROM P1_TO The charts need these values in order to render. Both Items are date pickers. The problem I have is that when the page first renders, these values are not defin
-
How to stop images from automatically brightening in lightroom 2
I have been using lightroom 2 for a few months now and what I can't seem to figure out is once I import my images, and I start to preview them the images will automatically alter (saying rendering image), usually creating an image that is brighter an