Could you help me regarding UOM conversion ???

Dear All,
I have a requirement like this ..
I have key-figure quantity A with various UOM, and i want to convert it into quantity B that has UOM is MT.
To fulfill it, i create Quantity Conversion Unit using tcode: RSUOM.
In the conversion factors tab:
1. Choosing Dynamic Determination of Conversion Factor
- Using Central Unit of Measure (T006) => Option 2.
In the UOM tab:
1. Source
- Choosing: UOM from DataRecord
2. Target of UOM
- Choosing: Fixed UOM => MT
Then i save it.
In the query Designer.
- I put KF Quantity A
- I create calculated KF Quantity B.
=> But i don't see the option in Qty B property regarding conversion that i've setup in RSUOM.
My Questions are:
1. Is my way right for my requirement ??
2. If i want to use this way (using RSUOM), how can i see the setting for My RSUOM Conversion in qty b.
Really need your guidance all.
Regards,
Niel.

Hi Neil
Regarding Unit conversion, there are some FM's avaiable,
May be these thread will help u
Quantity Conversion Function Module
"UNIT" in Transformation
Thanks,
Reward if helpd

Similar Messages

I cannot get Firefox to my page today, could you help. Regards J

Hello,
When I tried to use Firefox today, I cannot get acess to it, I have a
lot of information there including Favorites etc,.
Could you please help.
Regards,
James.

Rename or delete formhistory.sqlite (plus formhistory.sqlite-journal and formhistory.sqlite.corrupt and formhistory.dat, if they exist) in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder] in case there is a problem with the file that stores the "Saved Form" data.
This will remove all saved form data, so you may want to rename formhistory.sqlite to formhistory.sqlite.sav or move the file to another folder in case you need to recover some saved data.

Could you help me regarding this invalid data within xth_data ??.

Dear All,
Could you kindly share me your experience to solve this case please .. ?
I have a problem when i'm using exit function. The data transfered to xth_data variable is invalid (not same like what displayed in layout).
The exit function belong to Level: Input Production .
In one planning area, I have 2 level:
1. Level: Input Production
It has char:
cal_year, cal_month, category, machine, market, mill, version
KF: Amount Sales, Capacity.
2. Level: Input Capacity Machine.
It has char: cal_year, cal_month, Machine, Mill, version.
KF: Capacity.
The steps to trigger the error:
A.
I Input 5 Records in the level: Input Production.
=> the xth_data is still valid (data transfered to xth_data equals to data displayed in the layout).
B.
I Input 90 Records in the level: Input Capacity Machine.
C.
I have exit function in the planning level: Input Production. This objective to do some calculation for Amount Sales.
But why in this point, the xth_data has the invalid data ??? I mean, i can see the abundant data within xth_data ???
This data is beyond what we see in the layout at Planning Level: Input Production.
Why can it happen ?
Could you kindly help me to figure out this please .. .
Best regards,
Niel.

Hi Bindu,
Tks a lot for your response ..
So from your response, i need to filter it if i want to get the data that equals to what i see in the layout .
Could i make it in init function bindu ?
And other questions,
When i'm debugging, the number of subset in xth_data is different, when i modify field to be changed.
e.g.
If i fill 3 or 0 characteristic in "field to be changed", the data will show up 1 records.
But if i fill in all characteristic, the data will show up more than 1000 records.
Could you kindly explain me why it can happened ? Especially if i modify the characteristic within "field to be changed" ..
What's the relationship between field to be changed with xth_data ??
Still need your help bindu ..
Regards,
Niel.

Could you help me regarding the planning layout in excel please ???

Dear All,
Could you kindly help me to solve my case please .. ? :).
I tried to change the template of excel planning layout using this program: UPP_MASTER_CHECKIN.
I tried to modify the template by inserting some logo picture there.
I put the picture in the left-top corner,
but after i run the program, the logo picture position cover/above the planning data.
My questions is:
1. Could we setup in what row we're going to start the planning data ?? So it the planning data will not be covered by Logo ..
e.g.
Before:
Planning data is written in row 1 and column 1.
Could i modify the planning data to be written in row 6 and column 1.
Regards,
Niel..

Hi Neil,
you must insert row between logo and data region. Furthermore you must set image properties to not change its dimension.
Best Regards

Regarding replacement path.. Could you help me please .. ?

Dear all,
I have problem when i use variable replacement path, where it replace another variable.
The scenario is like this:
I have variable cal. month user input where the type is interval (let say it's called var A).
Then i create rep. path variable cal. month:
1. Replace with : Key
2. Use Interval : From Value.
I use this rep. path variable for restricted KF.
When i run the report:
I fill in the value for Var A:
01.2003 - 05.2003
The invalid things are:
1. Rep. Path variable only get the value 01.2003. The impact the KF is only restricted by 01.2003.
It supposed to be restricted by 01.2003, 02.2003, 03.2003, 04.2003.05.2003.
The questions are:
1. How can i overcome this problem?
2. How should i do, if i want to use replacement path in restricted KF that can restrict by 01.2003, 02..2003, 03.2003, 04.2003, 05.2003 ???
Could you help me to suggest what i should do please .. ?
Really need your guidances....
Regards,
Niel.

Hi Niel,
When you use a variable(v1) of processing type replacement path and try to replace it wih another variable the replacement is only by single value. This you can find by details tab in the variable(v1) being created.
Hence you have only options of replacing it wih from value/ to value/ difference.
I didn't undersand why you wish to use variable(v1) wih processing type replacement path when you could have used the input variable type for restriction of the characteristic in the restricted key figure.
I think for your requirement variable processing by manual input is more suitable unless you have some reason for replacement which I didn't undestand.
Thanks and regards,
Sunmit.

I'm using the Internet Personal Ancestral File Family Search but I'd like to work with the old version. Could you help me how to use it? Thank you

I was working with the old version of Family Search Personal Ancestral File through Internet but I cannot deal with the new version which uses Firefox. Could you help me to work with the old version? Thank you

Junho wrote:
However, in Numbers, I cannot do the same thing with same procedure..
What should i do to get all of those 4 at the same time?
Please let me know..Thank you!
First, be aware that Numbers is not MS Excel, and Excel is not Numbers. Features available in one of these two applications are not necessarily available in the other.
LINEST in Numbers works somewhat differently from what you describe. The function is well described in the "iWork Formulas and Functions Help" document, available through the Help menu.
I'd start there, with a search for LINEST.
Regards,
Barry

Could you help me about table control .. ?

Dear All,
I've a problem in table Control.
I put table control inside tab control (there are many tab in one screen where one tab has one table control).
The schenario of the program, i wanna use table control to maintain the value from some table.
So certainly it has insert/add, delete function.
As we know to do one function in those e.g. add record button, we need specify some code on that button.
So ..
Once when that button is pressed, we can check what button is being pressed using that code.
And it can run well.
But this is the strange one, if i have schenario like this :
1. I click add record button
    I will get the add code through ok_code/SY-UCOMM variable.
2. I scroll down/up the table control.
    (THIS IS THE WEIRD), the ok_code/SY-UCOMM variable still keep having add code. So every we scroll down/up, application also will add one record.
Could you help me to make ok_code/SY-UCOMM blank in every time i scroll down/up the table control ??
Or could you help me how to i specify the code for scroll down/up the table control so I can identify when user is scrolling down/up the table control??
I really need your guidance/suggestion how to overcome it .. ?
Many tks for all your attention.
Best regards,
Daniel N.

Following is a sample code of handling table control in BDC.
REPORT Y730_BDC5 .
*HANDLING TABLE CONTROL IN BDC
DATA : BEGIN OF IT_DUMMY OCCURS 0,
       DUMMY(100) TYPE C,
       END OF IT_DUMMY.
DATA : BEGIN OF IT_XK01 OCCURS 0,
       LIFNR(10) TYPE C,
       BUKRS(4) TYPE C,
       EKORG(4) TYPE C,
       KTOKK(4) TYPE C,
       NAME1(30) TYPE C,
       SORTL(10) TYPE C,
       LAND1(3) TYPE C,
       SPRAS(2) TYPE C,
       AKONT(6) TYPE C,
       FDGRV(2) TYPE C,
       WAERS(3) TYPE C,
       END OF IT_XK01,
       BEGIN OF IT_BANK OCCURS 0,
       BANKS(3) TYPE C,
       BANKL(10) TYPE C,
       BANKN(10) TYPE C,
       KOINH(30) TYPE C,
       LIFNR(10) TYPE C,
       END OF IT_BANK.
DATA : IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
       IT_BDCMSGCOLL LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
   FILENAME                      = 'C:\VENDOR.TXT'
   FILETYPE                      = 'ASC'
TABLES
   DATA_TAB                      = IT_DUMMY.
LOOP AT IT_DUMMY.
IF IT_DUMMY-DUMMY+0(2) = '11'.
    IT_XK01-LIFNR = IT_DUMMY-DUMMY+2(10).
    IT_XK01-BUKRS = IT_DUMMY-DUMMY+12(4).
    IT_XK01-EKORG = IT_DUMMY-DUMMY+16(4).
    IT_XK01-KTOKK = IT_DUMMY-DUMMY+20(4).
    IT_XK01-NAME1 = IT_DUMMY-DUMMY+24(30).
    IT_XK01-SORTL = IT_DUMMY-DUMMY+54(10).
    IT_XK01-LAND1 = IT_DUMMY-DUMMY+64(3).
    IT_XK01-SPRAS = IT_DUMMY-DUMMY+67(2).
    IT_XK01-AKONT = IT_DUMMY-DUMMY+69(6).
    IT_XK01-FDGRV = IT_DUMMY-DUMMY+75(2).
    IT_XK01-WAERS = IT_DUMMY-DUMMY+77(3).
    APPEND IT_XK01.
ELSE.
    IT_BANK-BANKS = IT_DUMMY-DUMMY+2(3).
    IT_BANK-BANKL = IT_DUMMY-DUMMY+5(10).
    IT_BANK-BANKN = IT_DUMMY-DUMMY+15(10).
    IT_BANK-KOINH = IT_DUMMY-DUMMY+25(30).
    IT_BANK-LIFNR = IT_DUMMY-DUMMY+55(10).
    APPEND IT_BANK.
ENDIF.
ENDLOOP.
LOOP AT IT_XK01.
REFRESH IT_BDCDATA.
perform bdc_dynpro      using 'SAPMF02K' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'RF02K-REF_LIFNR'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RF02K-LIFNR'
                              IT_XK01-LIFNR.
perform bdc_field       using 'RF02K-BUKRS'
                              IT_XK01-BUKRS.
perform bdc_field       using 'RF02K-EKORG'
                              IT_XK01-EKORG.
perform bdc_field       using 'RF02K-KTOKK'
                              IT_XK01-KTOKK.
perform bdc_dynpro      using 'SAPMF02K' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFA1-TELX1'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'LFA1-NAME1'
                              IT_XK01-NAME1.
perform bdc_field       using 'LFA1-SORTL'
                              IT_XK01-SORTL.
perform bdc_field       using 'LFA1-LAND1'
                              IT_XK01-LAND1.
perform bdc_field       using 'LFA1-SPRAS'
                              IT_XK01-SPRAS.
perform bdc_dynpro      using 'SAPMF02K' '0120'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFA1-KUNNR'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_dynpro      using 'SAPMF02K' '0130'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFBK-KOINH(02)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
DATA : FNAM(20) TYPE C,
       IDX      TYPE C.
MOVE 1 TO IDX.
LOOP AT IT_BANK WHERE LIFNR = IT_XK01-LIFNR.
CONCATENATE 'LFBK-BANKS(' IDX ')' INTO FNAM.
perform bdc_field       using FNAM
                                IT_BANK-BANKS.
CONCATENATE 'LFBK-BANKL(' IDX ')' INTO FNAM.
perform bdc_field       using FNAM
                                IT_BANK-BANKL.
CONCATENATE 'LFBK-BANKN(' IDX ')' INTO FNAM.
perform bdc_field       using FNAM
                                IT_BANK-BANKN.
CONCATENATE 'LFBK-KOINH(' IDX ')' INTO FNAM.
perform bdc_field       using FNAM
                                IT_BANK-KOINH.
IDX = IDX + 1.
ENDLOOP.
perform bdc_dynpro      using 'SAPMF02K' '0130'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFBK-BANKS(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
perform bdc_dynpro      using 'SAPMF02K' '0210'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFB1-FDGRV'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'LFB1-AKONT'
                              IT_XK01-AKONT.
perform bdc_field       using 'LFB1-FDGRV'
                              IT_XK01-FDGRV.
perform bdc_dynpro      using 'SAPMF02K' '0215'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFB1-ZTERM'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_dynpro      using 'SAPMF02K' '0220'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFB5-MAHNA'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_dynpro      using 'SAPMF02K' '0310'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFM1-WAERS'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'LFM1-WAERS'
                              IT_XK01-WAERS.
perform bdc_dynpro      using 'SAPMF02K' '0320'.
perform bdc_field       using 'BDC_CURSOR'
                              'WYT3-PARVW(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
perform bdc_dynpro      using 'SAPLSPO1' '0300'.
perform bdc_field       using 'BDC_OKCODE'
                              '=YES'.
CALL TRANSACTION 'XK01' USING IT_BDCDATA
                        MODE 'A'
                       UPDATE 'S'
                     MESSAGES INTO IT_BDCMSGCOLL.
ENDLOOP.
FORM BDC_DYNPRO USING PROG SCR.
CLEAR IT_BDCDATA.
IT_BDCDATA-PROGRAM = PROG.
IT_BDCDATA-DYNPRO = SCR.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
ENDFORM.
FORM BDC_FIELD USING FNAM FVAL.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = FNAM.
IT_BDCDATA-FVAL = FVAL.
APPEND IT_BDCDATA.
ENDFORM.
points plz (if this information is usefull).
Regard's
Raghunath.S

I would need to install Adobe Connect Add-in Test for only one webinar. When I pressed instal button - it said to me - it cannot be written on hard disc. Could you help me, please. Bretislav

I would need to install Adobe Connect Add-in Test for only one webinar. When I pressed instal button - it said to me - it cannot be written on hard disc. Could you help me, please. Bretislav

After posting my concern/question, especially in regards to the optical drive, I read this on this forum:
Jul 11, 2011 5:21 AM
I would like to update my macbook pro from Tiger to Snow Leopard, but my optical drive is not working. Can I take my macbook pro into the apple store and have them install it via a portable drive?
MacBook Pro, Optical drive is no longer working
Another poster replied, "Yes, I believe they will."
Is this true? Can someone verify this? Any idea of cost? I really don't need my optical drive. Besides, end of year, I'm getting a new Mack Book Pro.

I just pruchased a audio book and now I am trying to get it to itunes. It keeps saying I need a audible account name and password? My computer is authorized but I dont know my audibe account info? could you help me

I just purchased a adio book and now I am trying to get it to itunes. It keeps saying i need a audible account username and password? I put in my itunes info but that is not it? the book is in "public": on my computer could you help me

Hello Timmy790
Try the suggestions in the article below to resolve the issue of seeing your old Apple ID on your iPhone.
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/ts5223
Regards,
-Norm G.

TS1453 Hi, I bought Apple tv traying to rent a movie but there problem with itunes, and there is on apple tv don't have my country. could you help me please how can I solve this problem?

Hi, I bought Apple tv traying to rent a movie but there problem with itunes, and there is on apple tv don't have my country. could you help me please how can I solve this problem?

Whinston,
I live in Azerbaijan. Recently I bought apple tv in New York. When I come back to my country tried to rent movies from my country but couldn't find my country name on apple tv menu, so there is a problem I don't know how to fix it. is there have another way to take a rent movies?

Hi.I need help.my iphone was Stolen .how can I get back my iphone. Serial No.DX*****PMW.could you help me find my iphone.thank you very much.could you send me the ICCID number to help me find the iphone

Hi.I need help.my iphone was Stolen .how can I get back my iphone. Serial No.DX******PMW.could you help me find my iphone.thank you very much.could you send me the ICCID number to help me find the iphone.if you can help me.
<Personal Information Edited by Host>
Sincerely a Chinese girl really need your help

Sorry we are all users on this User Community No Apple Staff
Read this .
http://support.apple.com/kb/HT2526
Apple do not and cannot assist in finding stolen property ,that is the responsility of your Police

For some reason I cannot download and install the latest version of iTunes. 11.0.2. Could you help please? Each time I try, I get a command box saying 'The feature you are trying to download is on a network resource that is unavailable. Click Ok to try ag

For some reason I cannot download and install the latest version of iTunes. 11.0.2. Could you help please? Each time I try, I get a command box saying 'The feature you are trying to download is on a network resource that is unavailable. Click Ok to try again or enter an alternate path to a folder containing the installation package iTunes.ms in the box below.
Please help!
Many thanks in advance
Ben Bentley
West Midlands
UK

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

I have had a update on my mini ipad and its asking for a code could you help me out please

I have got a iPad mini a update has come though and its asking me for a code when i click update could you help me out please

TheArtificialNerd wrote:
I can say 100% that the AppleCare phone number only redirects to other AppleCare groups.
ALL of them Apple corporate or Apple Authorized partners.

Hello. the last month i face a problem with youtube at my macbook. most videos stop playing after maybe 20 - 25 sec. the same time the time bar stops moving. could you help me solve the problem? thank you

hello. the last month i face a problem with youtube at my macbook. most videos stop playing after maybe 20 - 25 sec. the same time the time bar stops moving. could you help me solve the problem? thank you

hello. the last month i face a problem with youtube at my macbook. most videos stop playing after maybe 20 - 25 sec. the same time the time bar stops moving. could you help me solve the problem? thank you

When I upgraded my OS to OS X 10.9 the computer doesn't connect the LAN automatically after sleep. Could you help me?

When I upgraded my OS to OS X 10.9 the computer doesn't connect the LAN automatically after sleep. Could you help me?

just an update on the situation....
the problem is solved. after trying everythng, at last i did a reset on my linksys e3200 router - and BANG!!!
airplay works.
hope this helps someone else.

Could you help me regarding UOM conversion ???

Similar Messages

Maybe you are looking for