Could you please give me a solution for this

Hi,
I am doing BPC migration project from MS to SAP NW.In this,
I added 20 Dimesion properties in the Entity dimension, It is not accepting 21st property in that Entity dimension.
Could you please give me a solution for this at the earliest.
Thanks and Regards
Krishan
Edited by: chinnikrishna on Aug 10, 2011 11:28 AM

Hi Krishan,
The length of property ID should not be more that 20 characters and the description has a limitation for 60 characters. Otherwise there is not limit as such to add properties.
Hope this helps.
Rgds,
Poonam

Similar Messages

[HELP] Could you please give me a solution to BW reports of ECC purchasing

Hey, guys,
I want to do some customized spend analysis reports of MM purchasing.The purchasing data will be retrived from 2 source systems ( 1 is ECC 6.0 and the other is R/3 4.6c ) And these reports should be viewed by "commodity" , however, there is no commodity code maintained in material master data.
So my solution is :
1. to find a idle field in material master data to maintain this "commodity", this could be flexible for me, however, it's not easy to push other guys to do this. ( I don't have the authority to do the master data maintainence.)
2. to maintain a mapping table in BW, and material and commodity(also description)should be the fields of this table. However, I don't think it's a good way. Because, this table is not easy to maintain and synchronized.
 Could you please give me any suggestion for this situation. Is there any good solution to my question? 
Thanks a lot

first things first .. if they want a report by commodity .. ask them to maintain it ..
1. if you can make the guys maintain commodity in a idle field, you can as well make them enhance the material master and add a new field ... its upto the flexibility u have
2. i dont think thats a bad idea.. but i would prefer somebody maintain the same mapping table in source system and ask them to RFC it to BI .. so that u can use it as a look up table ...

I have installed 2010 microsoft office 2010 home and business version for my laptop,and i have installed lync 2013.Now i want create online lync meeting from outlook,but i am unable view that lync icon in outlook.Please give me the solution for this que

I have installed 2010 Microsoft office 2010 home and business version for my laptop,and I have installed lync 2013.Now i want create online lync meeting from outlook,but i am unable view that lync icon in outlook.Please give me the solution for this issue.
Regards
Raghavendar

Hi Raghavendar,
Generally, when you install Lync 2013 in the computer with Office 2010, a Lync Meeting Add-in will be installed and enabled in Outlook 2010. Please follow these steps to check it:
1. In Outlook, click the File tab, click Options, and then click
Add-Ins.
2. Please take one of the following actions:
If the add-in is in the Inactive Application Add-ins list, follow these steps:
a. In the Manage drop-down list at the bottom of the dialog box, click
COM Add-ins, and then click Go.
b. Click to select the check box next to the add-in, and then click OK.
The New Online Meeting button should now be available in
Calendar View, and the Online Meeting button should be available when you create a new calendar item.
If the add-in is in the Disabled Application add-ins list, follow these steps:
a. In the Manage drop-down list at the bottom of the dialog box, click
Disabled Items, and then click Go.
b. Select the add-in, and then click Enable.
c. Restart Outlook, and then verify that the add-in is displayed in the
Add-ins dialog box.
The New Online Meeting button should now be available in
Calendar View, and the Online Meeting button should now be available when you create a new calendar item.
3. In Event Viewer, view the Application log to see whether an error was logged for Outlook, for Lync 2013, the Lync Meeting Add-in for Microsoft Office 2013.
Thanks,
Winnie Liang
TechNet Community Support

Could you please suggest me the scenario for this requirement ?

In module booking process we need the following process
1.Student select their interested event package via website.
2.Advisor review the student's event package list.
       2.1 In case of REJECT : student need to revise their list
       2.2 In case of APPROVE : all event package have confirm and run fee calculation.
The information above is shortly requirement , if any one have suggestion for this requirement please suggest me.

Vorad,
I have some suggestions for you:
1. Create the module/event booking with 'Manual Conditional' flag. Then, when the advisor approves a booking, remove the conditional flag. If the advisor rejects, cancel the booking. Here, you need to create some kind of UI for the advisor to review and approve/reject the requests.
OR
2. Create the booking using a booking status such as 'pre-booked'.
OR
3. Don't create any bookings from the student side. Just create a booking plan instead.
OR
4. Look at a subtle process change that would let you use more out-of-the-box user interfaces/processes. Students simply request special booking authorization for the event packages they want. This automatically sends workflow approval messages to the advisor. Then, just have a general rule which blocks all bookings that don't have this special authorization.   Once the student has a special booking authorization, he can just go into the course registration self-service and book the approved event packages.
Michael

Could you please provide me any inputs for this interesting requirement

Hi Experts,
I need to create a report to diplay all reports (such as z or A or any reports) accessible through the SA38, its title, last used (in past 1 year), how many time it was used per past 1 year, and number of different users. Any inputs on this would be very much helpful.
Thanks in advance,
Viven

Interesting but not possible, to do that you need to have already implemented a trace function inside each program one year ago.
SAP didn't save this kind of data.
You could always have a look of the transaction STATTRACE.
Fred

Can someone please give me a solution for this.

2 Problems...
Its getting to the point where i just want to go to Apple Genius and start rageing.
Its a brand new iPod Touch 5g. My old iPod Touch had been replaced just yesterday.
I had a bad day yesterday and by this new problem im not in the best of mood.
I come home all happy because i didnt use my iPod Touch 5g for 2 whole weeks, Plug it into my Computer to found USB not recognized.
I tried everything from knowledge to the Internet but found nothing. Not one them gived me a answer to fix this. Its really annoying because my iPod Touch isnt charging as well.
The weird thing is... when i plugged it into my PS3, at that time my iPod Touch had 20%. My playstation didnt also recognize it. I left there for hours as i played. When i finally finish playing i found my iPod was full charge... It didnt state that it was charging. I would have noticed.
My second problem is the WIFI isnt working probably. All the wifi's i tried it either works for a few minutes than it loses connection or doesnt connect at all.
What is the bloody problem. Is the iPod faulty or is it me.

lllaass wrote:
lizdance40, did you read the original post? The poster's problem is that when he connects the iPod to his computer the iPod does not appear in iTunes. He does not say he has a wifi problem with his iPod.
lizdance40 wrote:
You need to do an update on your router's firmware, or get a higher speed router..
Or replace the router and or modem. High demand can burn out a router in 2 years. Typical life is about 4-5 at most.
The new iPod is more advanced and if your router is slow or inconsistant signal your iPod will stop trying to connect to save your battery.
of course he dose have a wifi problwm. read the last line of the original post

I am unable to connect to wifi anywere on my IPAD mini, can you please provide me some solutions for this error

I pad mini is not able to connect to any wifi public or private, the only error i received everytime is incorrect password.
i have tried connecting to wiifi many times even changing the password but still the same error.

reset network settings
settings>general>reset>reset network settings

HT1695 am using ipod touch, but my ipod cant support wifi connection. could you please give solution,,

am using ipod touch, but my ipod cant support wifi connection. could you please give solution,,

Is this your problem:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
It is frequently a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Otherwise:
Does the iPod connect to other networks?
Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>GeneralReset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Could you please give me an example of reconcilation and consolidation for

Hi all:
could you please give me an example of reconcilation and consolidation for ODS?
Thank you very much1

could you please give me an example of reconcilation and consolidation for ODS?
like we can take example like this.
from different data sources we get data in to one dso and consolidate the data before making availabe to reporting.
we will remove duplicates if any,

I want to install an mail Id on Ipad Mini other than yahoo an google but it is showing an error message about SSL could not connect. Please give me the solution on this.

Hi
i want to install an mail Id on Ipad Mini other than yahoo an google but it is showing an error message about SSL could not connect. Please give me the solution on this.

Hello there ypda75,
I have an article here that has a list of settings to get from your Email provider so you can make sure that the settings are correct. It has troubleshooting steps to try as well. Also I would recommend restarting the router, and/or testing a differnet network.
iOS: Unable to send or receive email
http://support.apple.com/kb/ts3899.
If you are unable to send or receive email, try the following steps:
Restart the iOS device.
Tap Safari and attempt to load a webpage to ensure that the device has Internet access. If you're unable to load a webpage, try the Wi-Fi assistant.
Try an alternative Internet connection.
If your email is provided by your Internet provider, try connecting from the home network.
If your iOS device has an active cellular data plan, try to disable Wi-Fi: Tap Settings > Wi-Fi and turn off Wi-Fi.
If not, try a different Wi-Fi network.
Log in to your email provider's website to ensure that the account is active and the password is correct.
Delete the account from Settings > Mail, Contacts, Calendars and then add the email account again on the iOS device.
If you're still unable to send or receive email, contact your email provider and verify the account settings are correct. You will need to gather this information (PDF).
All the very best,
Sterling

Could you please give me simple manual how to install RAC on 2 VMWare hosts

Hello everyone,
Could you please give me simple manual how to install RAC on 2 VMWare hosts?
There are several such manuals in the Internet but I cannot differ where is good wnd where is not.
Thank you

Moderator Action:
This post has been moved from Database General Questions,
To RAC Installation
for closer topic alignment.

I have downloaded DNG Profile Editor 1_0_4 and prepared a profile which I can not see in my Camera Raw 6.0 (I have photoshop CS5). Could you please give me an advice?

I have downloaded DNG Profile Editor 1_0_4 and prepared a profile which I can not see in my Camera Raw 6.0 (I have photoshop CS5). Could you please give me an advice?

Uninstall Trusteer software
http://www.trusteer.com/support/uninstalling-rapport-mac-os-x
Remove Sophos
https://discussions.apple.com/message/21069437#21069437

I am asking this for my friend, who was using iphone 4. He lost it one week back and couldnt find it so far. He is having his IMEA number of the phone. Could you please help me in tracing out this?

I am asking this for my friend, who was using iphone 4. He lost it one week back and couldnt find it so far. He is having his IMEA number of the phone. Could you please help me in tracing out this?

If he has not previously set up Find My iPhone, there is no way to
track the iPhone. Apple does not and will not track phones.
Immediately change all passwords. Hopefully he was using a passcode
to get by the lock screen. If he was, his data is protected; if not, anyone
who finds the iPhone can access anything that was on it.

Could you please give me the method to draw Line Graph in detail?

Could you please give me the method to draw Line Graph in detail?

Hi,
First update your username instead of using that number.
and also provide full information like
Apex version
Database version
I am giving you one link related to charts,
http://dgielis.blogspot.in/2011/02/apex-4-bug-series-type-bar-line-marker.html
Hope this will helps you
Thanks and Regards
Jitendra

Can anyone solve (or) give me a solution for this problem.....?

Hi Everyone!
Can anyone solve (or) give me a solution for this problem.....?
We have used two folders Source & Finalwork. We have get image from Source folder and put silo path & Moved to Finalwork folder.
Is this possible to check whether both folder images Embedded color profile same or not.
-yajiv

Could you elaborate what you mean by this
We have get image from Source folder and put silo path & Moved to Finalwork folder.
Possibly again with a screenshot to illustrate the task?
// 2012, use it at your own risk;
#target photoshop
var theFolder = Folder.selectDialog ("select source folder");
if (theFolder) {
var theFiles = theFolder.getFiles(/\.(jpg|tif|eps|psd)$/i)
var theOtherFolder = Folder.selectDialog ("select target folder");
if (theOtherFolder) {
var theOtherFiles = theOtherFolder.getFiles(/\.(jpg|tif|eps|psd)$/i)
var missingFiles = new Array;
var unmatchedProfiles = new Array;
// work through files;
for (var m = 0; m < theFiles.length; m++) {
 var check = false;
 var theFile = theFiles[m];
// find name of the same name;
 for (var n = 0; n < theOtherFiles.length; n++) {
 var theOtherFile = theOtherFiles[n];
// if one is found;
 if (theFile.name == theOtherFile.name) {
 check = true;
 var oneFile = app.open(File(theFile));
 var otherFile = app.open(File(theOtherFile));
// check profiles;
 if (oneFile.colorProfileName == otherFile.colorProfileName) {
// collect umages with unmatched profiles;
 else {unmatchedProfiles.push(theFile)};
// collect missing files;
 if (check == false) {alert ("hahaha");missingFiles.push(theFile)}
// alert of problems;
if (unmatchedProfiles.length > 0) {
alert ("the corresponding files for these do have a different color space:\n"+unmatchedProfiles.join("\n\n"));
if (missingFiles.length > 0) {
alert ("these files miss corresponding ones:\n"+missingFiles.join("\n\n"));
////// get psds, tifs and jpgs from files //////
function getFiles (theFile) {
 if (theFile.name.match(/\.(jpg|tif|psd|pdf|)$/i)) {
 return true

Could you please give me a solution for this

Similar Messages

Maybe you are looking for