Could you please split the "Options" button into two?

Thunderbird used to have a single button at the top of the email message to show remote content--but now there's an Options button with that choice plus four more. Since so many messages require me to show remote content, it usually takes me two clicks to continue with the message. Quite annoying. If that button were to be split into a "Show Remote Content" button and an "Other Options" button, things would revert to the previous level of convenience. (I know I could opt to have the remote content displayed automatically, but I like that additional measure of security.) TIA!

I agree with you.
This has been reported as a bug.
* https://bugzilla.mozilla.org/show_bug.cgi?id=1062961
You could add your vote for this change.
You vote by clicking on the Vote link - at the top where it says:
'''Importance: -- normal with 4 votes (vote) '''
You will need to register and logon to vote.

Similar Messages

  • Apple...Could you please make the "Digi Outs" on MacMini 8 ch ADAT?

    Hey,
    Apple...Could you please make the "Digi Outs" on MacMini 8 ch ADAT compatible?
    If it were possible to "switch" in sound-preferences the SPDIF outs to 8ch ADAT out...
    Then that would make the MacMini the Awesome slave-system solution....
    SvK

    it would be great.. but only if it also includes stereo sp/dif support as well.
    I'd love to see a macbook pro or mac pro model with 8 channels of digital i/o right out of the box, especially if it were reliable and super low latency. and instead of canibalising into the sales of the apogee audio interfaces apple has touted as perfect for logic, they could also release a nice, apogee designed 8 channel converter to handle the analog i/o.
    another bonus is that because so many users don't need more than 8 channels of simultaneous i/o, you'd have potentially high-end i/o without even starting to use the FW or PCI bus... awesome for laptop users who are hitting bottlenecks trying to balance good quality low-latency i/o, fast hard drives and other devices like say liquid mix, all on the firewire bus. you could leave your FW bus free for fast drive access, because your audio i/o would already be taken care of elsewhere.
    sign me up.

  • Could you please add the abillity to search through layers?

    Could you please add the abillity to search through layers?

    CS6 has search capabilities in the Layers panel. You can search by layer type, name, Layer Effect, Blend Mode, Layer Atribute (i.e. whether a layer is visible or not) and by Assigned Layer colors)

  • Could you please split FF into 2 separate entities?

    After several years of research, Mozilla has now launched it's visual overhaul.
    It's a mixture between visuals for regular old school computer users and the new and upcoming touch-based users.
    Most apparent of the latter is the usage of icons. Well the exclusive usage of icons. Microsoft has done the same thing with their Office suit and after several YEARS of using it, I still miss the good old 2003 version. So don't tell me to just keep using it and I'll start liking it. I won't. But I digress.
    While I do applaud the effort put into keeping up with current technology, you shouldn't pigeon-hole the entirety of your user base into what seems to be an emerging niche market.
    I do not need touch-sized icons for cutting, or copying or pasting, I already know CTRL+ (+/-) will zoom the page, as will many other keyboard shortcuts perform the tasks in what is now the Menu. And truth be told, that's a sorry excuse of a menu.
    In my opinion, it might be best if Mozilla split FF into 2 different programs.
    One for the regular users. The ones that noticed the potential of the browser and helped make it popular.
    And another for the iPhone generation of touch-based users.
    Some other thoughts:
    - It has already been mentioned that the toolbar at the bottom ain't coming back. This 'my way or the highway'-attitude is not something we, the users, appreciate from devs.
    - The standard grey for the currently not used tabs: No, just no. In a Win7 environment with Aero activated, it looks like an application is open just behind FF. Highly annoying.
    - I'm not sure if I should be happy, or sad, to see we've gone back to the good ol DOS days. Where application Menu's were only accessible through the ALT-button. Good thing you didn't completely remove the old menu, for FF 29 would've been uninstalled without a second thought.
    Lots of ranting, not enough positivity, but that's what one gets when you do a VO without explicitly informing the user before doing it. To at least give em the chance to opt out.
    Lots of negativity, but it might still be salvageable. By answering the final question:
    How can I change the color/transparency of the non-active tabs, without needing to install custom themes?

    Hi Skid,
    I understand your surprise at the removal of these features but I can't undo these changes. I'm just a support volunteer and I do not work for Mozilla. But you can send your feedback about these changes to http://input.mozilla.org/feedback. Firefox developers collect data submitted through there then present it at the weekly Firefox meeting.
    Leaving feedback here won't do any good as you'll be redirected to the Input site and the thread will be closed/marked as off-topic.

  • Could you please enhance the pencil tool? Thanks!

    I saw somewhere online that Acrobat provides good support for tablet computers and O.S. However, there is no good tool to let tablet user to write by hand.
    The pencil tool seems good, but when I use it to write, the first stroke will be moved/selected when I start the second stroke, which makes writing continuously impossible/difficult.
    Could you enhance the pencil tool to facilitate the hand-writing? Thanks a lot! Hope acrobat gets better!
    If you have any questions, you can reach me freely.

    This is a user 2 user forum. Here is the place to get your request noted:  https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

  • How to split the AP invoice into two invoices

    Dear All..,
    Can you tell how can i split the AP vendor invoice which i was posted erlier..i want spil the invoice into two invoices to pay the partial payment to some amount..
    For ex : i have poste one invoice with 50000/- rs..and now i want to split this doc into two like 30000 and 20000, and i want to made the payment for through APP for 30000..
    Can you tell me the step how to do this..
    Advanced thanks
    Bhargav

    If you reverse the original vendor invoice ( credit memo), you can create a new vendor invoice by splitting the amounts with different payment methods. This way APP will pick up only required amount.
    Amount split in vendor invoice can be done by activating "Enable amount split" in OBY6 configuration. This will give you an additional tab "Amount split" in vendor invoice.
    Hope this helps
    Thanks,
    Kalyan

  • Could you please delete the following thread?

    This thread appears in Google top-10 if someone googles my full name. Could one of moderators/admins delete it? I am applying to many grad schools and I want to have a more relevan information about me in top-10.
    http://discussions.apple.com/thread.jspa?threadID=1851838
    Thank you very much.

    It's already gone, Dominion.
    Good luck in your grad work!

  • Could you please tell me the path of PR header text?

    Dear experts,
            I want to add delivery informtion in pr header text,but i can not find the path ,i only found the path:spro=>materials management=>Purchasing=>Purchase Requisition=>Texts for purchase requisition=>Define text  types,this path is to add PR line item text,could you please tell the path to add PR header text?
    Many thanks.
    Best Regards,
    Merry

    Hi,
    There is no SPRO configration to create PR Header text
    Use the Function module
    Goto SE37
    Use FM CREATE_TEXT - for create header text, SAVE_TEXT - for change.
    Parameters:
    TDOBJECT = 'EBANH'
    TDNAME = purchase requisition number (with leading zeros)
    TDID = 'B01'
    CLIENT and LANGU - client and languag
    regards,
    santosh

  • Could you please help, in clarifying my view on Workflow(MSMP) in AC. I have mentioned below, my understanding.

    -  Rule id is created on BRF+, and this Rule id contains Path(s) and their Rule Result(s).  I have created 1 Rule Result, for a New/Change account.
    - after creating this Rule Id, i open MSMP, and the Rule Id appears against the Process Id, in Step1. I am not using any Escape path, so as to have my first workflow creation simple.
    - In Step 2, the Rule ID is Result is given a Trigger value description. So, i provide a description, for my Rule Result.However could you please say, the usage of this Trigger value, except that, it proivdes Description of the Rule result
    - then i go to Step 5 , for creating Path, Add a Path-> Add a stage (GRAC_SECURUTY). Since, this is for testing purpose, i am not giving GRAC_ROLEOWNER/GRAC_MANAGER. I just want a workflow to be completed for New/Chnage Account request.
    - I do not maintain Agents or Variables & Templates.
    - In route Mapping, I assig the Path to the Rule Id, Then i generate the version, and it is created succesfully.
    So, from the above steps , i understand that When a user raises a New/Change Request(eg. process ID: SAP_GRAC_ACCESS_REQUEST), the Rule ID is identified , from Step1. Then the Rule result is identified from  Decision Table( in BRF+). Then the Rule Result identifies the path from Step 'Route mapping'. Aftre Path is identified, it travels through the Stages, defined in 'Maintain Path'
    Therafter , the Security team or Role Owner can provison the request.
    Please let me know, about my understanding.

    Hi Plaban
    I wrote a piece about explaining how MSMP works with the mappings. It might help clarify your understanding: MSMP - Multi Step Multi Process – GRC’s answer to Workflow Configuration Flexibility
    When you submit a request each type has a Process Id. In the case of an Access Request that is the SAP_GRAC_ACCESS_REQUEST. The webdynpro has a heap of code that finds that process id and goes to look at the MSMP configuration.
    The very first item to be executed is the Initiator rule. Each Process Id can only have one active Initiator Rule as it is mapped (visible on Step 1 of the MSMP). If you have created a BRF+ Initiator Rule then it will go and execute it. Initiator Rules are designed to handle multiple scenarios (hence the results).
    In your BRF+ you would have specified the possible combinations (again look at my post). In MSMP Step 2 for the Initiator rule for Rule Results you need to tell the MSMP how to handle each value that the BRF+ rule might return. As a result, you have to map each value. The description won't matter much except as meaningful information.
    After you finish Step 2, you then need to go over to Step 6 to maintain the routings. This is where you have to tell the MSMP which Path the rule result should go to for the Initiator Rule. After that you jump back to Stage 4 for Paths/Stages to maintain them.
    This mapping assumes that you are not building any new Agents or Paths. If you were to build a new Path and Stages you would have to configure them first and then go to Step 6 to map them
    Please let me know if there is still any further confusion.
    Regards
    Colleen

  • Could you please send me some feedback?

    Hey guys, I just uploaded a video tutorial on youtube about how to create a clean background in adobe photoshop.
    Could you please check the video out and tell me your opinions so I can improve?
    http://www.youtube.com/watch?v=IT_JiW4w9yY

    Thanks for everyone who provided me with constructive critisism, it really means a lot to me and it will definetly help me get better at Photoshop as well as teaching some others
    To all of you who said that this discussion isn't appropriate because "I am trying to promote myself", you are wrong.
    First of all, just because my Photoshop work is in a form of a video and uploaded to youtube, it doesn't mean that I am trying to promote myself. It could have been something else then a video, for example a picture and the video could be uploaded somewhere else from Youtube.
    As far as I know, I posted my work that has to do with Photoshop and this is the appropriate forum. By posting this, I didn't hurt anyone since the goal of this was never intended to be "self promotion. If you guys are saying that this is self-promotion, then just to let you know that by replyiing here, people are paying more attention to my "self-promotion"!
    I didn't ask for an "analysis", so don't try to put words in my mouth. All of what I asked for was for the people who would like to, to give me their opinion.
    Anyway, this is my last reply for all of you who said that this isn't appropriate, since it is out of subject of this discussion and that I didn't create this discussion for all the arguing that is going on!

  • Could you please put a fast shortcut in the toolbar to un/check "Allow pages to choose their own colors,..." from Options Content Colors

    could you please put a fast shortcut in the toolbar to un/check "Allow pages to choose their own colors,..." from Options> Content> Colors>

    hello bygabyga, i think this will be a too specific use-case to be added as a general feature into the browser. you can make use of an extension though to get this kind of functionality: https://addons.mozilla.org/firefox/addon/toggledocumentcolors-198916

  • The decline button is not showing up on IOS 7 iphone 5(when phone locked). could you please advise me on this?

    The decline button is not showing up on IOS 7 iphone 5(when phone locked). could you please advise me on this?

    Is it because the new itunes looks different.
    View > Show Sidebar
    Then it should work just the same as on your old computer.

  • Hi there, I moved to a new country (Luxembourg ), my previous card is not working anymore, I am trying to change country and region but it looks like the option is not available, could you support on the issue please ? Thx ahead, Corneliu

    Hi there, I moved to a new country (Luxembourg ), my previous card is not working anymore, I am trying to change country and region but it looks like the option is not available, could you support on the issue please ? Thx ahead, Corneliu

    CHANGING APPLE ID/EDIT ACCOUNT INFORMATION/CHANGE ITUNES COUNTRY
    Tap Settings / iTunes & App Stores, then tap the Apple ID signed in. Sign out of the current Apple ID account and then sign in with another account or create a new Apple ID http://support.apple.com/kb/HT2731?viewlocale=en_US
    Go to settings/facetime and tap the ID there and log out and log in with new ID.
    Go to settings/messages and turn off imessages wait 30 seconds and turn it back on, go to “receive messages  at” tap on the ID there, sign out and sign in with new ID.
    Go to settings/icloud and delete the account and when prompted select “keep information on your device” then turn it back on with the new ID.
    To edit account information tap Settings / iTunes & App Stores / Apple ID: / View Apple ID
    To change your iTunes Store country, sign in to the account for the iTunes Store region you would like to use, tap Settings/iTunes & App Store/Apple ID/View Apple ID/Country/Region
    Read this article for information http://support.apple.com/kb/HT1311

  • Hey I have an Ipad 3. it was fully charged but da ipad had suddenly switched off I cannot switch it on! could you please inform me how to switch it on again. I tried connecting it to a charger but theres no responds. I also tried pressing the button.

    Hey my ipad 3 was fully charged. But all of a sudden it got switched off and I cannot switch it back. I connected it to a charger but there was no improvements. I also tried pressing the top button for 30 seconds. Nothing seems to switch it on. Could you please tell me what to do?

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Hi, ı have a problem once I push the power button and it starts to opening but small symbol turning and turning, it really lasts so long. could you please help me? is it so slow to open a mac pro.

    Hi, ı have a problem once I push the power button and it starts to opening but small symbol turning and turning, it really lasts so long. could you please help me? is it so slow to open a mac pro.

    OS X Version Number?
    Repair Disk
    Steps 2 through 8
    http://support.apple.com/kb/PH5836

Maybe you are looking for