Could you pls expalin me how to solve visa error 1073807246, I am serial communication with the hardware. thanks

Hardware :- light modulator

Here is the definition of the error from LabView:
"VISA: (Hex 0xBFFF0072) The resource is valid, but VISA cannot currently access it"
Are you able to communicate with the hardware manually using a sw like "HyperTerminal"? If so, configure the serial port setting to the same as that to communicate manually.
It appears that you are using a valid comm port, but it cannot talk to the hardware for some reason. It could be as simple as a bad connection (wiring / soldering / etc) to the hardware.
The first thing I would check is the ability to communicate manually. If it works manually and you duplicate the settings, it should work. If you can;t communicate manually, then you'll have to do some troubleshooting..
-JLV-

Similar Messages

HT3775 hello mate,could you pls tell me how can i play a downloaded movie

hello mate,could you pls tell me how can i play a downloaded movie

Note, if the downloaded movie is from something illegal, we won't be able to tell you.
If it is from something legal, what source is it?
Do you have an Intel or a PowerPC Mac?

How to solve this problem in Visual Studio 2013 Community with Apache Cordova

I'm trying to run an application in VisualStudio2013
community with Apache Cordova
and I'm getting a lot of error messages.
Any ideia about this?
Regards,
Samambaia Jr.

What version of the VS Cordova Extension are you using? CTP3.0? It looks like your node packages didn't get installed properly. Try clearing the Cordova Cache (Tools/Options/Tools for Apache Cordova/Cordova Tools). After
that, reload your project and rebuild.
-Ellen

Could you please tell me how to resolve the following import error? Thanks.

Hi,
When run the following command to import two tables:SPSSDMRESPONSE_LOG and SPSSSCORE_LOG, there are some error in the log. Could you please tell me how to resolve these error? Thanks.
Command:
imp S3SLORL10/Pass1234@SPSS file=/yhan/subTables.dmp ignore=y tables=SPSSDMRESPONSE_LOG,SPSSSCORE_LOG
There are some error in the log file.
The log file is:
Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Export file created by EXPORT:V10.02.01 via conventional path
import done in US7ASCII character set and AL16UTF16 NCHAR character set
import server uses AL32UTF8 character set (possible charset conversion)
export client uses WE8MSWIN1252 character set (possible charset conversion)
. importing S3SLORL10's objects into S3SLORL10
. importing S3SLORL10's objects into S3SLORL10
IMP-00061: Warning: Object type "S3SLORL10"."Info224_T" already exists with a different identifier
"CREATE TYPE "Info224_T" TIMESTAMP '2011-09-21:06:54:13' OID 'A1F8D176EF2949"
"07882153DE7E4CC9F9' AS OBJECT ("SYS_XDBPD$" "XDB"."XDB$RAW_LI"
"ST_T","Response" "Response225_COLL","Property" "ModelOutput223_COLL")FINAL "
"INSTANTIABLE "
IMP-00063: Warning: Skipping table "S3SLORL10"."SPSSDMRESPONSE_LOG" because object type "S3SLORL10"."Info224_T" cannot be created or has different identifier
IMP-00061: Warning: Object type "S3SLORL10"."Metric214_COLL" already exists with a different identifier
"CREATE TYPE "Metric214_COLL" TIMESTAMP '2011-09-20:09:56:02' OID '98999BF48"
"84F4BAB81D391109E4BB823' AS VARRAY(2147483647) OF "nameValueT"
"ype208_T""
IMP-00063: Warning: Skipping table "S3SLORL10"."SPSSSCORE_LOG" because object type "S3SLORL10"."Metric214_COLL" cannot be created or has different identifier
IMP-00017: following statement failed with ORACLE error 942:
"ANALYZE TABLE "SPSSDMRESPONSE_LOG" ESTIMATE STATISTICS "
IMP-00003: ORACLE error 942 encountered
ORA-00942: table or view does not exist
IMP-00017: following statement failed with ORACLE error 942:
"ANALYZE TABLE "SPSSSCORE_LOG" ESTIMATE STATISTICS "
IMP-00003: ORACLE error 942 encountered
ORA-00942: table or view does not exist
Import terminated successfully with warnings.

*Import of table containing object type(s) fails with IMP-00061 IMP-00063 [ID 203822.1]*
in short: search for the TOID_NOVALIDATE parameter

Cannot update my iPad2 to 5.1 An unknown error message cancels the download process. Could you please inform me how to fix this issue? Thanks!

Cannot update my jail broken iPad2 & iPhone 4S to 5.1
An unknown error message cancels the download process. Could you please inform me how to fix this issue? What is also odd is the fact that the update through iTunes is substantially bigger than downloading it directly OTA, although both methods have been unsuccessful so far...
Thanks!

About the only thing you can try is using the Online Internet Recovery system to reinstall Lion on your Mac over the top of the current install. that will reset all system files and should not touch your personal files or the apps you have installed.
Or iof you have a recent Time Machine backup use that to restore your Mac to that point in time.

TS1453 Hi, I bought Apple tv traying to rent a movie but there problem with itunes, and there is on apple tv don't have my country. could you help me please how can I solve this problem?

Hi, I bought Apple tv traying to rent a movie but there problem with itunes, and there is on apple tv don't have my country. could you help me please how can I solve this problem?

Whinston,
I live in Azerbaijan. Recently I bought apple tv in New York. When I come back to my country tried to rent movies from my country but couldn't find my country name on apple tv menu, so there is a problem I don't know how to fix it. is there have another way to take a rent movies?

Could you please tell me how to implement many companys in one Group?

Dear All,
I have one question how to implement many companys in one Group about FI,Could you pls give me some advice,thank you very much .

Hi
Suppose that you want to create a Company , Reliance Group of Companies(RGI) and Company codes Reliance Infocomm(REL1) and Reliance Petrochemicals(REL2).
Go to OX15----->Define Company
IMG--->Enterprise Structure-->Definition-->Financial Accounting---->Define Company
Here you will create RGI as Company.
Go to OX02----->Define Company Code
IMG--->Enterprise Structure-->Definition-->Financial Accounting---->Edit,Copy,Delete,Check Company Code.
Here you will create REL1 and REL2 as Company codes.
Go to OX16------>Assign Company Code to Company
IMG---->Enterprise Structure--->Assignment-->Financial Accounting---->Assign Company Code to company.
Here you will assign Company to both the Company Codes.
Regards
Venkat

Could you please tell me how to write efficient SQL queries?

Hi
Could you please tell me how to tune or write an efficient SQL query?
Regards,

Hi user576726
Pls study & try this ....
When your query takes too long ...
hope it helps....
Regards,
Abdetu...

I'm new to Mac and I have a Mac Mini. Could you please tell me how I could paste an URL to a video downloader like "Coolmuster Video Downloader for Mac"? I can copy the url but I could not paste it on the downloader. I appreciate your help to my problem.

I'm new to Mac and I have a Mac Mini. Could you please tell me how I could paste an URL to a video downloader like "Coolmuster Video Downloader for Mac"? I can copy the url but I could not paste it on the downloader. I appreciate your help to my problem.

Is this happing because the external is formatted to PC and not mac?
Yes that is correct.
Will I need to get a mac external hard drive if I wish to continue to save my documents like this?
If you no longer use a PC you could format this drive for the Mac. However be aware that formatting a drive will erase all the data on it. So you would need someplace to copy the data off this drive to while you did the re-format and then you could copy the data back.
You could get another drive, format it for the Mac and copy the data to it. Then re-format the original drive and use it as a backup drive. Always good to have backups.
Post back with the drive type and size of the current drive, if you are doing backups now and how and if you still need to access this drive from a PC.
regards

Could you let me know how to enable and use ITS on SAP ECC5 and ECC6

Could you let me know how to enable and use ITS on SAP ECC5 and ECC6

Hello Tina,
please see here
in tree select "Installation and Activation"
<a href="http://help.sap.com/saphelp_nw70/helpdata/en/4f/2e6a52c3cdc44d83169b181a9c62ba/frameset.htm">http://help.sap.com/saphelp_nw70/helpdata/en/4f/2e6a52c3cdc44d83169b181a9c62ba/frameset.htm</a>
<a href="http://help.sap.com/saphelp_nw70/helpdata/en/b8/2a8d65be7eee4eb66067f8a33d1c8b/frameset.htm">http://help.sap.com/saphelp_nw70/helpdata/en/b8/2a8d65be7eee4eb66067f8a33d1c8b/frameset.htm</a>
best regards

Hello, could you please tell me how much is replacement of cracked iPhone 5 screen. Thanks

Hello, could you please tell me how much is replacement of cracked iPhone 5 screen. Thanks

Depends on your country
In US
some Apple stores will replace the screen on iPhone5 and 5C and if the service is available the cost is $149
Where the service is not available then an exchange iphone price is $269

Could you pls answer this

What all the thing should be used in order to improve the performance and what all the thing should be avoided ?
Explain abt control brk statement ?
Could you pls give me clear explanation for CHECK,EXIT,STOP ?
In real time, what is the steps which is used for transfer data - BDC
whether call transaction,session method pls explain it
And also explain about the include statement used in BDC
Could you pls answer this

Hi
All this AT NEW, AT FIRST, AT END OF and AT LAST are called control break statements of Internal tables and are used to calculate the TOTALS based on sertain key fields in that internal table
FIrst to use these statements the ITAB has to be sorted by the key fields on whcih you need the SUM of the fields.
Some time you will get * when moving data from this int table to other table using these commands
so you have to use
READ TABLE ITAB INDEX SY-TABIX in AT..ENDAT..if you are using other fields between them
DATA: sflight_tab TYPE SORTED TABLE OF sflight
                  WITH UNIQUE KEY carrid connid fldate,
      sflight_wa LIKE LINE OF sflight_tab.
SELECT *
       FROM sflight
       INTO TABLE sflight_tab.
sort sflight by carrid connid.
LOOP AT sflight_tab INTO sflight_wa.
AT NEW connid.
    WRITE: / sflight_wa-carrid,
             sflight_wa-connid.
    ULINE.
ENDAT.
WRITE: / sflight_wa-fldate,
           sflight_wa-seatsocc.
AT END OF connid.
    SUM.
    ULINE.
    WRITE: / 'Sum',
              sflight_wa-seatsocc UNDER sflight_wa-seatsocc.
    SKIP.
ENDAT.
AT END OF carrid.
    SUM.
    ULINE.
    WRITE: / 'Carrier Sum',
              sflight_wa-seatsocc UNDER sflight_wa-seatsocc.
    NEW-PAGE.
ENDAT.
AT LAST.
    SUM.
    WRITE: / 'Overall Sum',
              sflight_wa-seatsocc UNDER sflight_wa-seatsocc.
ENDAT.
ENDLOOP.
BDC
BDC:
Batch Data Communication (BDC) is the process of transferring data from one SAP System to another SAP system or from a non-SAP system to SAP System.
Features :
BDC is an automatic procedure.
This method is used to transfer large amount of data that is available in electronic medium.
BDC can be used primarily when installing the SAP system and when transferring data from a legacy system (external system).
BDC uses normal transaction codes to transfer data.
Types of BDC :
CLASSICAL BATCH INPUT (Session Method)
CALL TRANSACTION
BATCH INPUT METHOD:
This method is also called as CLASSICAL METHOD.
Features:
Asynchronous processing.
Synchronous Processing in database update.
Transfer data for more than one transaction.
Batch input processing log will be generated.
During processing, no transaction is started until the previous transaction has been written to the database.
CALL TRANSACTION METHOD :
This is another method to transfer data from the legacy system.
Features:
Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.
Updating the database can be either synchronous or asynchronous. The program specifies the update type.
Transfer data for a single transaction.
Transfers data for a sequence of dialog screens.
No batch input processing log is generated.
Differences between Call Transaction and Sessions Method:
Session method.
1) synchronous processing.
2) can tranfer large amount of data.
3) processing is slower.
4) error log is created
5) data is not updated until session is processed.
6) generally used for back ground jobs.
7) at atime we can update to more than one screens.
Call transaction.
1) asynchronous processing
2) can transfer small amount of data
3) processing is faster.
4) errors need to be handled explicitly
5) data is updated automatically
6) for background n fore ground jobs.
7) at atime we can update to a single screen.
For BDC:
http://myweb.dal.ca/hchinni/sap/bdc_home.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/bdc&
http://www.sap-img.com/abap/learning-bdc-programming.htm
http://www.sapdevelopment.co.uk/bdc/bdchome.htm
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://help.sap.com/saphelp_47x200/helpdata/en/69/c250684ba111d189750000e8322d00/frameset.htm
http://www.sapbrain.com/TUTORIALS/TECHNICAL/BDC_tutorial.html
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
call Transaction or session method ?
Regards
anji

I want to learn SD , Could you pls send me the Reference Book names.

Hi All,
I want to learn SD , Could you pls send me the Reference Book names.
and i heard about materials like Billing , Pricing , Shipping - Which material should i study first to understand baisc flow.
Thanks in Advance.
Regards,
Nithi.

Hi ,
Instaed of a book i will refer you the help files of SAP .
You can get there files at http://help.sap.com/
An for SD the link is http://help.sap.com/saphelp_47x200/helpdata/en/92/df293581dc1f79e10000009b38f889/frameset.htm
These files will help you a lot .
even today also SD gurus take help from these files only.
Regards

Could you please correct me - how to use

Could you please correct me how can I use category in WHERE condition ?
LOOP AT gt_zgfld_prctr
INTO wa_zgfld_prctr
<b>WHERE category CO LIMIT_PRCTR%</b>.
Thanks,

Hi,
Please try this.
ranges: r_category for gt_zgfld_prctr-category.
r_category-sign = 'I'.
r_category-option = 'CP'.
r_category-low = 'LIMIT_PRCTR%'.
append r_category.
LOOP AT gt_zgfld_prctr
INTO wa_zgfld_prctr
WHERE category IN r_category.
ENDLOOP.
Regards,
Ferry Lianto

Could you anyone guide me how to capture no. of incoming request in weblogi

Could you anyone guide me how to capture no. of incoming request in weblogic?

Use a tool like webalilzer to process and graph the access logs. It wont be in real time, but you can certainly track accesses to your site.
TGF

Could you pls expalin me how to solve visa error 1073807246, I am serial communication with the hardware. thanks

Similar Messages

Maybe you are looking for