Couldn't create DataSource???

Hi, there,
I download the AVTransmit3.java and install JMF2.1.1b, and no problem in compiling. But, when I run it by "java AVTransmit3 sample.mov 192.255.200.76 22222", it always returns "Couldn't create DataSource". I tried to use different types of sample files, it still didn't work.
Any suggestion? Thanks for any reply.

I think you should use
file:/sample.mov
instead of just a file name. A protocol is needed.
Good luck.
Jim

Similar Messages

JMF on Ubuntu: Couldn't create DataSource

Hi!
My problem is this:
After resolved to unzip the file (tail -n) , I had install JMF-2.1.1e for Linux.
I set the enviroment variables in this way in .bashrc :
export JMFHOME=/usr/bin/JMF-2.1.1e
export CLASSPATH= $JMFHOME/lib/jmf.jar:$JMFHOME/lib/mediaplayer.jar:$JMFHOME/lib/multiplayer.jar:$CLASSPATH
export PATH=$PATH:$JMFHOME/bin:$JMFHOME/lib:/usr/bin/jre1.6.0_21/bin
export LD_LIBRARY_PATH=$JMFHOME/lib:/usr/bin/jre1.6.0_21/lib/i386:/usr/bin/jre1.6.0_21/lib/i386/client
Before launch ./jmfregistry, I connected my webcam.
My dmesg result is:
[ 2013.520664] usb 1-1: new high speed USB device using ehci_hcd and address 4
[ 2013.710452] usb 1-1: configuration #1 chosen from 1 choice
[ 2013.737378] uvcvideo: Found UVC 1.00 device USB2.0 Camera (1e4e:0100)
[ 2013.752284] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[ 2013.753703] input: USB2.0 Camera as /devices/pci0000:00/0000:00:11.0/0000:02:03.0/usb1/1-1/1-1:1.0/input/input7
After that I launch ./jmfregistry
In “capture devices”, i clicked “Detect Capture Devices”
The output is:
JavaSound Capture Supported = true
JavaSoundAuto: Committed ok
Name = v4l:USB2.0 Camera:0
Trying 4 320 240
Trying 3 160 120
Trying 3 320 240
Trying 3 640 480
Trying 3 176 144
Trying 3 352 288
Trying 3 768 576
Trying 4 160 120
Trying 4 320 240
Trying 4 640 480
Trying 4 176 144
Trying 4 352 288
Trying 4 768 576
Trying 5 160 120
Trying 5 320 240
Trying 5 640 480
Trying 5 176 144
Trying 5 352 288
Trying 5 768 576
Trying 6 160 120
Trying 6 320 240
Trying 6 640 480
Trying 6 176 144
Trying 6 352 288
Trying 6 768 576
Trying 7 160 120
Trying 7 320 240
Trying 7 640 480
Trying 7 176 144
Trying 7 352 288
Trying 7 768 576
Trying 8 160 120
Trying 8 320 240
Trying 8 640 480
Trying 8 176 144
Trying 8 352 288
Trying 8 768 576
Trying 9 160 120
Trying 9 320 240
Trying 9 640 480
Trying 9 176 144
Trying 9 352 288
Trying 9 768 576
Trying 10 160 120
Trying 10 320 240
Trying 10 640 480
Trying 10 176 144
Trying 10 352 288
Trying 10 768 576
Trying 11 160 120
Trying 11 320 240
Trying 11 640 480
Trying 11 176 144
Trying 11 352 288
Trying 11 768 576
Trying 12 160 120
Trying 12 320 240
Trying 12 640 480
Trying 12 176 144
Trying 12 352 288
Trying 12 768 576
Trying 13 160 120
Trying 13 320 240
Trying 13 640 480
Trying 13 176 144
Trying 13 352 288
Trying 13 768 576
Trying 14 160 120
Trying 14 320 240
Trying 14 640 480
Trying 14 176 144
Trying 14 352 288
Trying 14 768 576
Trying 15 160 120
Trying 15 320 240
Trying 15 640 480
Trying 15 176 144
Trying 15 352 288
Trying 15 768 576
java.lang.Error: Can't open video card 1
java.lang.Error: Can't open video card 2
java.lang.Error: Can't open video card 3
java.lang.Error: Can't open video card 4
java.lang.Error: Can't open video card 5
java.lang.Error: Can't open video card 6
java.lang.Error: Can't open video card 7
java.lang.Error: Can't open video card 8
java.lang.Error: Can't open video card 9
In fact when I lounched my application in java (that used VideoTrasmit.java by Sun)
when I arrive at
ds = Manager.createDataSource(locator);
the exception is:
Name = v4l:USB2.0 Camera:0
Trying 4 320 240
Trying 3 160 120
Trying 3 320 240
Trying 3 640 480
Trying 3 176 144
Trying 3 352 288
Trying 3 768 576
Trying 4 160 120
Trying 4 320 240
Trying 4 640 480
Trying 4 176 144
Trying 4 352 288
Trying 4 768 576
Trying 5 160 120
Trying 5 320 240
Trying 5 640 480
Trying 5 176 144
Trying 5 352 288
Trying 5 768 576
Trying 6 160 120
Trying 6 320 240
Trying 6 640 480
Trying 6 176 144
Trying 6 352 288
Trying 6 768 576
Trying 7 160 120
Trying 7 320 240
Trying 7 640 480
Trying 7 176 144
Trying 7 352 288
Trying 7 768 576
Trying 8 160 120
Trying 8 320 240
Trying 8 640 480
Trying 8 176 144
Trying 8 352 288
Trying 8 768 576
Trying 9 160 120
Trying 9 320 240
Trying 9 640 480
Trying 9 176 144
Trying 9 352 288
Trying 9 768 576
Trying 10 160 120
Trying 10 320 240
Trying 10 640 480
Trying 10 176 144
Trying 10 352 288
Trying 10 768 576
Trying 11 160 120
Trying 11 320 240
Trying 11 640 480
Trying 11 176 144
Trying 11 352 288
Trying 11 768 576
Trying 12 160 120
Trying 12 320 240
Trying 12 640 480
Trying 12 176 144
Trying 12 352 288
Trying 12 768 576
Trying 13 160 120
Trying 13 320 240
Trying 13 640 480
Trying 13 176 144
Trying 13 352 288
Trying 13 768 576
Trying 14 160 120
Trying 14 320 240
Trying 14 640 480
Trying 14 176 144
Trying 14 352 288
Trying 14 768 576
Trying 15 160 120
Trying 15 320 240
Trying 15 640 480
Trying 15 176 144
Trying 15 352 288
Trying 15 768 576
java.io.IOException: java.lang.ArrayIndexOutOfBoundsException: 0
Error : Couldn't create DataSource
Who can help me? Sorry for my bad English.
Thanks!
Edited by: 805237 on 26-ott-2010 2.30

Make sure you're running as an administrator...
And try using "vfl://0" as the locator and see what that gives you.

NoProcessorException: Couldn't create processor in Linux!

Hi,
I'm trying to create processor in CentOS (kernel-2.6.18-53.1.4.el5). But i've got the following Exception:
Couldn't create processor:
javax.media.NoProcessorException: Error instantiating class: com.sun.media.processor.unknown.Handler : java.awt.HeadlessException:
No X11 DISPLAY variable was set, but this program performed an operation which requires it.
Here is my sample code:
DataSource dataOutput = null;
Processor processor = null;
try {
     String inputfile = "file:" + System.getProperty("user.dir")
                    + File.separator + "sample.wav";
     MediaLocator locator = new MediaLocator(inputfile);
     ds = javax.media.Manager.createDataSource(locator);
     ds.connect();
     ds.start();
} catch (Exception e) {
     System.err.println("Couldn't create DataSource\n" + e);
try {
     processor = javax.media.Manager.createProcessor(ds);
} catch (NoProcessorException npe) {
     System.err.println("Couldn't create processor:\n" + npe.toString());
}I'm not sure where is the bug in this code? Please help me with your valuable feedback.
Thanks in advance!
ARIF

Hey! i've fixed the problem by installing Xvfb. :)
Xvfb (X virtual framebuffer) is an X11 server that performs all graphical operations in memory, not showing any screen output. Can run on machines with no display hardware and no physical input devices. It emulates a dumb framebuffer using virtual memory.
Cheers,
ARIF

"Create" Datasource Privilege for Deployer Role

Hi,
We want to enable the "create" datasource privilege for the Deployer Role, after reading some information for this role looks like they are only allow to modify or delete datasources, but not create them. Admin privilege is not a good option for this group.
Any ideas or suggestions...

BoopathyVasagam wrote:
Thank you for your answer. So should I issue the below statement? (Since I dont have dba privs i couldn't test this)
GRANT CREATE VIEW to P_ETL_TEST_VIEW;
I doubt that above will prevent the error from being thrown.
prior to running anonymous block again; just do as below
SET ROLE NONE;
doing so should result in same error being thrown when invoking
BEGIN
p_etl_test_view;
END;

How can i create datasource on apache server for ADF application?

Hi All,
i my use case i have created simple adf application using ADF BC and want to deploy on Apache server 6.x.
So my question is that how can i create Data Source i have goggling and find two different way to do this.
1. write following line of code on apache server conf/Context.xml file.
<Resource name="jdbc/TestDB" auth="Container"
              type="javax.sql.DataSource"
               driverClassName="oracle.jdbc.OracleDriver"
              url="jdbc:oracle:thin:@localhost:dst"
              username="jagrandb" password="jagrantest" maxActive="20" maxIdle="10"
              maxWait="-1"/>
but when i have used this way i got following exception.
org.apache.tomcat.dbcp.dbcp.PoolingDataSource$PoolGuardConnectionWrapper cannot be cast to oracle.jdbc.OracleConnection
check link-
https://forums.oracle.com/thread/2564233
2. write following line of code apache conf/Server.xml file
<GlobalNamingResources>
    
    <Resource name="UserDatabase" auth="Container"
              type="org.apache.catalina.UserDatabase"
              description="User database that can be updated and saved"
              factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
              pathname="conf/tomcat-users.xml" />
<Resource name="jdbc/TestDB" auth="Container"
              type="oracle.jdbc.pool.OracleDataSource"
              description="User database that can be updated and saved"
              driverClassName="oracle.jdbc.driver.OracleDriver"
              factory="oracle.jdbc.pool.OracleDataSourceFactory"
              url="jdbc:oracle:thin:@//172.31.43.207:1521:dst"
              username="jagrandb" password="jagrantest" maxActive="20" maxIdle="10"
              maxWait="-1"   />
</GlobalNamingResources>
and add this line in context.xml file inside <context> tag
<ResourceLink global="jdbc/TestDB" name="jdbc/TestDB" type="oracle.jdbc.pool.OracleDataSource"/>
but when i have run application i have got following error
log-
javax.servlet.jsp.JspException: Unable to get connection, DataSource invalid: "java.sql.SQLException: invalid arguments in call"
at org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.getConnection(QueryTagSupport.java:298)
at org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.doStartTag(QueryTagSupport.java:181)
at org.apache.jsp.test_jsp._jspx_meth_sql_005fquery_005f0(test_jsp.java:110)
at org.apache.jsp.test_jsp._jspService(test_jsp.java:63)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:374)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:342)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:267)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286)
at org.apache.coyote.http11.Http11AprProcessor.process(Http11AprProcessor.java:857)
at org.apache.coyote.http11.Http11AprProtocol$Http11ConnectionHandler.process(Http11AprProtocol.java:565)
at org.apache.tomcat.util.net.AprEndpoint$Worker.run(AprEndpoint.java:1509)
at java.lang.Thread.run(Thread.java:662)
Aug 2, 2013 5:17:21 PM org.apache.catalina.core.StandardWrapperValve invoke
SEVERE: Servlet.service() for servlet jsp threw exception
javax.servlet.jsp.JspException: Unable to get connection, DataSource invalid: "java.sql.SQLException: invalid arguments in call"
at org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.getConnection(QueryTagSupport.java:298)
at org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.doStartTag(QueryTagSupport.java:181)
at org.apache.jsp.test_jsp._jspx_meth_sql_005fquery_005f0(test_jsp.java:110)
at org.apache.jsp.test_jsp._jspService(test_jsp.java:63)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:374)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:342)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:267)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286)
at org.apache.coyote.http11.Http11AprProcessor.process(Http11AprProcessor.java:857)
at org.apache.coyote.http11.Http11AprProtocol$Http11ConnectionHandler.process(Http11AprProtocol.java:565)
at org.apache.tomcat.util.net.AprEndpoint$Worker.run(AprEndpoint.java:1509)
at java.lang.Thread.run(Thread.java:662)
so what is the solution how to create datasource on apche server which suitable for adf application?
when i test data source using following code used 1. way as i mentioned above its running fine bt not for second.
<%@ taglib uri="http://java.sun.com/jsp/jstl/sql" prefix="sql" %>
<%@ taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c" %>
<sql:query var="rs" dataSource="jdbc/TestDB">
select empname from pay_emphdr where empcd='JK1306'
</sql:query>
<html>
<head>
    <title>DB Test</title>
</head>
<body>
<h2>Results</h2>
<c:forEach var="row" items="${rs.rows}">
    Foo ${row.empname}<br/>
</c:forEach>
</body>
</html>
please help me. it is very urgent.
thanks in Advance
Manish

Hi Lindalnci
i have already tried this tutorial and in my post i have defined first way to do using this procedure.
in that case i have got following exception as i have mentioned above
org.apache.tomcat.dbcp.dbcp.PoolingDataSource$PoolGuardConnectionWrapper cannot be cast to oracle.jdbc.OracleConnection

Creating Datasource and Extracting from SAP R/3 ECC 6.0

Hello Gurus,
I am very new in BI field, I am learning through notes provided in this Blog.
Curretnly I need to know how we create Datasource at SAP R/3 ECC 6.0 (is there any difference b/t these?)
and how we may extract data from R/3 ECC 6.0 Source System.
Looking for your kind reply
Thanks in Advance
KK

You can use any specific Extractors to Create Data Source in R/3 side.
Let me explain with Generic Extraction
Goto SBIW--> you can see all the extractions here
Generic extractors are of 3 types:
1. Based on table/view
2. Based on Info set Query
3. Based on Function module
If you would like to create a custom table, then goto SE11>Select Table>Click on Create (Now create you own table here & use this table while creating Transaction data)
Goto RS02-->Select Transaction data.
Click on Create
Choose an application component to which the data source is to be assigned
Click on Generic Delta
Specify the Delta-Specific and the type for the field.
Specify a safety interval
Select Data type>Save> Now Data source was generated successfully
After generating the data source , you will find Delta Flag checked.
Please go through the following link for Generic Delta
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33]
Once you've done with Data Source in R/3 side--> u need to Replicate it to BI
Goto RSA1>source system>Select the Source system in which u've created Data source>R.C select Data Source Overview>Select the Application Component to which Data source is assigned>R.C Select Replicate dataSorce>here you can see your NEW Data source
Hope it helps!

Table for creating datasource .

Hi Experts
I am trying to create a report.
The report output is as follows
Companycode | business partner type | Business partner No | vendor no | customer no |cheque no | cheque date | cheque amount | check status | bank account no |.
Now to create datasource for fetching the above data I am trying to find the tables . All the data related to cheque is present in the table PAYR but from where can I get business partner number and business partner type .
Any clues ?

Hi,
If you are extracting data from CRM system then refer the below given tables for required information,
- BUT000 : BP: General data - Contains Business Partner Number, Partner Category, Partner Type, First Name, Last Name et
[http://wiki.sdn.sap.com/wiki/display/CRM/CRM+Tables]
Regards,
Durgesh.

Error while creating datasource from table MBEWH

Hi all,
I am facing an error message while creating datasource from table MBEWH
"Invalid extract structure template MBEWH of DataSource "; This operation failed, because the template structure quantity fields or currency fields, for example, field LBKUM refer to a different table.
Can anyone help me that why system is not allowing me to generate generic datasource for table MBEWH to transfer my month wise inventory data.
thanks and regards.

Hi Zakir,
      This was comming for classification data... when ever you want to extract some classification related data then we can't create generic datasources directly.. for that you need to go with CTBW ( tcode ) and   create one datasource...
   so, you need to check that   related table also.. for that MBEWH table..
    ALL THE CLASSIFICATION RELATED DATASOURCES WE CAN'T CREATE DIRECTLY... JUST LIKE AUSP table also.. liek this..
regards
@jay

OATS: Error Creating datasource client connection

Hi All
When i try to add montiors in the OATS controller machine i am getting the following error .
Error while creating datasource client connection.
i am trying to monitor a linux machine. I am able to ping that machine from controller.
when i tried to do
plink.exe username@hostname i am getting the following error ...
FATAL error : Network error : Connection timed out..
Can anyone please help me on this??
Thanks

I'm not sure if this is the same problem but the following thread may help (mentioning the ports that may need opening on your firewalls)...
Re: What are the various ports used by OLT?
oracle.port.rmi=4444
oracle.port.http=8088
oracle.port.empstart=9001
oracle.port.uil2=7071
oracle.port.dataCollector=7073
oracle.port.webservice=8083
oracle.port.jndi.rmi=1098
oracle.port.jndi=1099
oracle.port.https=8433
* 9001 (Agent Comunication Port)
* 1099 (Datacollector Comunication Port)
* 8088 (for running OpenScript scripts)

Error while creating datasource userdsn for oracle 10g Errorcode (998)

while creating datasource userdsn for oracle 10g i am getting error "The setup routines for the oracle in OraDb10g_home1 odbc driver could not be loaded due to system error code 998" please give reply soon

Thanks for your reply , Steve.
I noticed that there is a default datasouce on the EM with the following parameters:
<data-source
          class="com.evermind.sql.DriverManagerDataSource"
          name="OracleDS"
          location="jdbc/OracleCoreDS"
          xa-location="jdbc/xa/OracleXADS"
          ejb-location="jdbc/OracleDS"
          connection-driver="oracle.jdbc.driver.OracleDriver"
          username="scott"
          password="->pwForScott"
          url="jdbc:oracle:thin:@localhost:1521:oracle"
          inactivity-timeout="30"
     />
The location and xa-location attributes that I use for my "test" data source are the same as the default one. So, could this be the issue?
What should be the values for location and xa-location attributes from my "test" data source?
Any help will be greatly appreciated.
Thanks,
Shyam

Error while creating datasource from view ZBSIS_VIEW

Hi all,
I could not create the datasource on the database table BSIS as it said "Invalid extract structure template BSIS of Datasource". I had suggestions that I should create a view and then create the Datasource on it. So I created the view and tried. But still I am facing an error message while creating datasource from custom Database View ZBSIS_VIEW.
"Invalid extract structure template ZBSIS_VIEW of DataSource"
Can anyone help on this regard.
thanks.

Hi,
Yes. You need a create a view on tables BSIS, BKPF and T001 as the currency/quantity fields in BSIS have reference fields from the other 2 tables.
In BSIS, in the currency/quantity fields tab, you have some ref tables and fields. You would need to include these tables and join in the view. You would also need to include the ref fields like WAERS, HWAE2, HWAE3, etc in the view. Then you would be able to create the datasource.

Create datasource issue with Planning 9.3.1

The plan is to upgrade to 9.3.3 so will need 9.3.1 first.
I have installed 9.3.1 Planning on win 2003 server and finished the configuration steps as well.
All my hyperion planning databases are on a Oracle RAC system 11g installed on Linux.
The individual SIDs are hyp1 and hyp2 and we use HYP to connect.
I used HYP as SID for all other configuration steps and was successful but when I try to use HYP as SID in the create datasource process I get the error " Relational Database Connection Failed:= :[Hyperion][Oracle JDBC Driver][Oracle]ORA-12505 Connection refused, the specified SID (HYP) was not recognized by the Oracle server."
If I use either HYP1 or HYP2 it works fine but does not work with HYP.
Is this an issue with 9.3.1 or will this continue to be an issue with 9.3.3 as well? Any suggestions to use HYP as my SID instead of using HYP1 or HYP2?
Thank you.

That article didnt mention planning but I wonder if it is possible to create a datasource using the standard method pointing to one db instance
Then go into HSPSYS_DATASOURCE and update rdb_server_url to something like (it will need updating to the correct path)
jdbc:hyperion:oracle:TNSNamesFile=D:\oracle\\product\\10.2.0\\db_1\\NETWORK\\ADMIN\\tnsnames.ora;TNSServerName=HYP
or may be worth having a look at http://www.datadirect.com/resources/jdbc/oracle-rac/connecting.html
as 9.3.1 uses datadirect jdbc drivers.
Cheers
John
http://john-goodwin.blogspot.com/

Windows 8 installation error: "We couldn't create a new partition or locate an existing one. For more information, see the Setup log files."

I recently tried testing Server 2012 for installation and I had a major issue. Windows 8 also uses the same method for installation so this should also apply to Windows 8. I thought this might be helpful for other people who have the same
problem. My setup is a 1U server with no DVD drive, no hard drives, and only USB. I have a new hard drive that I wanted to install Server onto, so I put it in and ran the installer off a thumb drive. I kept receiving the following error when
I tried to format the hard drive and proceed with the installation:
"We couldn't create a new partition or locate an existing one. For more information, see the Setup log files."
After hours of troubleshooting, I determined my problem was I was using a thumb drive to install it, and Windows didn't like it. Some people had similar issues when similar devices were plugged in (i.e. external hard drives, SD cards, CF cards, etc).
In my case, it was the installation drive itself was a thumb drive. I ended up digging up an external DVD drive and placed the installation onto a DVD. Worked flawlessly. Now I am up and running.
I tried
the steps here to no avail.
Hope this helps anyone else with the same problems.

Hi,
Thanks for sharing. We really appreciate your time and efforts. Hope your experience will help other community members facing similar problems.
Leo Huang
TechNet Community Support

Couldn't create a new partition with a windows 7 installation

Hi
I have a b570 laptop. It was originally windows 7 home premium and I wanted to install windows 7 ultimate from scratch (didn't want to upgrade it) with new partitions, so I have deleted the original system partition and tried to create a new partition but to my surprise I couldn't create a new one. I tried to use the onekey recovery but it keeps asking me for the original partition, which I don't have. Please help me if you know how I could solve this problem. Thank you in advance.

With the windows 7 installation disk...I select the unallocated space shown on the screen -> click on the new button on the bottom -> set the size of the new partition to be created -> and click create.

Creating DataSources for File Source Systems in csv format in sap bw 7.0

Hi,
Please explain how to Create DataSources for File Source Systems in csv format in sap bw 7.0. WITH SCREENSHOTS
Thanks
JINI
Edited by: Jini Jayan on Jun 11, 2008 11:36 AM

Step 1. Select Source systems under Modelling in the left panel. In the right panel, right-click Source systems and select Createu2026.
Step 2. Select the FileSystem, manual meta data, data using file inte option, and then click to continue.
Step 3. Enter a name and a description for the source system, and then click to create the source system.
Now create an application component
Step 1. Select InfoSources under Modelling in the left panel. In the right panel, right-click InfoSources and select Create application componentu2026.
Step 2. Enter a name and a description for the application component, and then click to continue. (BW automatically adds a prefix of "Z" to the technical names of application components, unlike the naming system used for other BW objects.If u give the name as AC_DEMO it will be saved as ZAC_DEMO in the system.
Now create infosource
Step 1.Select InfoSources under Modelling in the left panel. Right-click the newly created Application Component , and then select Create InfoSourceu2026.
Step 2. Select the option Master data/texts/hierarchies, and then click to continue.
Step 3. Enter your infoobject name, and then click to continue.
Now you will be asked
Infosource(name) assigned to Appln component(name)?
Click continue
Now go back to workbench and see the Infoobject listed under the Application component name (under Infosource)
Right click the infoobject name and select Assign Datasource
Enter the Infoobject name as Infosource name and the source system name and continue
Now you ll get datasource assignment confirmations for Infosource_ATTR and Infosource_TEXT for master data and text.
Click yes and continue
Now you ll be taken to the Infosource(master data) change screen
Source system name will be given
Below that u need to give the datasource name u2026.._ATTR
Click Activate.
Now Click the tab transfer rules
Copy the communication str infoobject names to an excel sheet
For ex if your infoobj are IO_MATNUM and IO_MATNAME (material number and material name) copy and paste as
IO_MATNUM      IO_MATNAME
MAT001     TEA
MAT002     COFFEE
MAT003     SUGAR
GIVE YOUR DATA IN THE EXCEL. AND CLICK File Save As CSV(comma delimited) and save to ur system. Give file name as something like infosourcename_ATTR.csv
Now back to the Infosourcechange screen
Source system name will be given
Below that u need to give the datasource name u2026.._TEXT
And activate
Now Click the tab transfer rules
Copy the communication str infoobject names to an excel sheet
GIVE YOUR DATA IN THE EXCEL. AND CLICK File Save As CSV(comma delimited) and save to ur system. Give file name as something like infosourcename_TEXT.csv
Now create Infoobject to load data
Go to Infosourceu2014Appln Componentu2014InfoObju2014SourceSystemu2014rightclick->create Infopackage
Step 2. Select the DataSource Material number (Master data), enter a description for the InfoPackage, and then click to continue.
Give infopackage description as Infopackage:InfoObj_ATTR
Now take care to select the first item in datasource and click continue
In the next screen click external data tab
Click client workstation
Datafileu2026.file name (browse to give the file u saved in ur system)
There will be an option to remove header data from file.remove 1 row.
File typeu2014csv file
Now click schedule tabu2014start dataload immediatelyu2014start.
In the same way
Go to Infosourceu2014Appln Componentu2014InfoObju2014SourceSystemu2014rightclick->create Infopackage
Step 2. Select the DataSource Material number (text)enter a description for the InfoPackage, and then click to continue.
Give infopackage description as Infopackage:InfoObj_TEXT
Now take care to select the second item in datasource and click continue
In the next screen click external data tab
Click client workstation
Datafileu2026.file name (browse to give the file u saved in ur system)
There will be an option to remove header data from file.remove 1 row.
File typeu2014csv file
Now click schedule tabu2014start dataload immediatelyu2014start.
Click the icon below admn workbench to go to monitor and check the load
Or you go back to Infosourceu2014Appln Componentu2014InfoObju2014right clickmaintain master data
Click execute
You can see the data load
Hope this helps!!!

Couldn't create DataSource???

Similar Messages

Maybe you are looking for