'Couldn't create RGB colorspace error'

Hi,
I tried to print with my HP Deskjet F380 under SnowLeopard and get the following error message:
'Error: Couldn't create RGB colorspace'
I've not found information about this error message.
The test page (printer's utility) comes out without any problem, but if I try to print from any other app, this error comes.
Can this issue be in relation with monitor calibration (I used Eye one calibrator to create icc profile a few days ago)

sdennett wrote:
One of the Snow Leopard updates has broken both of my printers. Both are hard-wired network printers that previously worked fine.
1. Brother HL-5250DN B/W laser
If you are using the Brother driver, have you tried using the Generic PostScript PPD as a workaround?
2. Samsung CLX-3170 Color Laser
No matter what I try to print, I always get the same error: "couldn't create rgb colorspace". I have searched both these forums and the web and can't even find a description of what might be causing this (although may Mac owners seem to be having variations of the problem).
3. Troubleshooting -- What I have tried (systematically, multiple times)
- Re-installed latest printer drivers from Manufacturer's sites
- Installed Gutenprint 2.4 CUPs drivers
Which driver are you using when adding the printer? Have you tried the other one? Samsung has SL drivers for this model, so you shouldn't have to use the Gutenprint driver.
I hope that someone at Apple has a solution.
Apple doesn't write the drivers, so if using the Generic PostScript PPD or switching drivers doesn't work, you might have better luck contacting Brother and Samsung.

Similar Messages

Couldn't create Distiller Window, Error: 126

I'm getting an error that says "Could not create Distiller window, Error: 126-The specified module could not be found"
This happens when I first start up the machine, and also when I try to print a Word document to a PDF. Acrobat will not open to do any other diagnostic work. I tried going into Control Panel>Add and Remove Programs and doing a repair on the Acrobat program, but that didn't help. This is a problem with Acrobat 9.0 Standard and Win XP Pro with SP3. Can anyone help with this?

Thanks, I updated to the current version 9.3.4, but that didn't solve the issue. Finally found a seemingly unrelated Windows issue that I corrected and the problem with the Distiller window went away, so I guess that it somehow affected it as well.

Error while trying to export with Preview: 'unable to convert NSNamedColorSpace System controlColor to Device RGB colorspace'

When I try to export a PDF with preview, the dialog doesn't show and this error appears in the system log.
11/2/13 2:01:01.684 PM Preview[828]: -[NSRemoteView viewDidMoveToWindow] caught non-fatal NSInternalInconsistencyException 'unable to convert NSNamedColorSpace System controlColor to Device RGB colorspace' with backtrace (
          0   CoreFoundation                      0x00007fff8e24d41c __exceptionPreprocess + 172
          1   libobjc.A.dylib                     0x00007fff8a400e75 objc_exception_throw + 43
          2   CoreFoundation                      0x00007fff8e24d1f8 +[NSException raise:format:arguments:] + 104
          3   Foundation                          0x00007fff8be42c61 -[NSAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 189
          4   ViewBridge                          0x00007fff8a08165c -[NSSecureColor initWithColor:] + 724
          5   ViewBridge                          0x00007fff8a08136f +[NSSecureColor secureColorWithColor:] + 48
          6   ViewBridge                          0x00007fff8a0a4cfb -[NSRemoteView sendFontSmoothingBackgroundColorToService:] + 40
          7   ViewBridge                          0x00007fff8a0a5bf5 -[NSRemoteView viewDidMoveToWindow] + 197
          8   AppKit                              0x00007fff881461d0 -[NSView _setWindow:] + 2899
          9   AppKit                              0x00007fff88143804 -[NSView addSubview:] + 364
          10 AppKit                              0x00007fff88157953 -[NSFrameView addSubview:] + 45
          11 AppKit                              0x00007fff88165cb5 -[NSWindow setContentView:] + 511
          12 AppKit                              0x00007fff889cb233 -[NSVBSavePanel init] + 287
          13 AppKit                              0x00007fff8874d5b9 +[NSSavePanel newRemotePanel] + 309
          14 AppKit                              0x00007fff8874d675 +[NSSavePanel _crunchyRawUnbonedPanel] + 120
          15 AppKit                              0x00007fff885a54fc -[NSDocument _preparedSavePanelForOperation:] + 260
          16 AppKit                              0x00007fff885a5f6f __85-[NSDocument runModalSavePanelForSaveOperation:delegate:didSaveSelector:contextInfo:]_block_ invoke_2 + 320
          17 AppKit                              0x00007fff885d5910 -[NSDocument _commitEditingThenContinue:] + 501
          18 AppKit                              0x00007fff885d5abd -[NSDocument _commitEditingWithDelegate:didSomethingSelector:contextInfo:thenContinue:] + 138
          19 AppKit                              0x00007fff885a5e20 __85-[NSDocument runModalSavePanelForSaveOperation:delegate:didSaveSelector:contextInfo:]_block_ invoke + 375
          20 AppKit                              0x00007fff885989b8 -[NSDocument _processActivity:blockingMainThread:] + 1373
          21 AppKit                              0x00007fff88599921 -[NSDocument performActivityWithSynchronousWaiting:usingBlock:cancellationHandler:] + 220
          22 AppKit                              0x00007fff885a5c9a -[NSDocument runModalSavePanelForSaveOperation:delegate:didSaveSelector:contextInfo:] + 137
          23 Preview                             0x000000010392901b Preview + 917531
          24 AppKit                              0x00007fff8834d3d0 -[NSApplication sendAction:to:from:] + 327
          25 AppKit                              0x00007fff88368348 -[NSMenuItem _corePerformAction] + 394
          26 AppKit                              0x00007fff88368084 -[NSCarbonMenuImpl performActionWithHighlightingForItemAtIndex:] + 117
          27 AppKit                              0x00007fff883b74dd -[NSMenu _internalPerformActionForItemAtIndex:] + 35
          28 AppKit                              0x00007fff883b7359 -[NSCarbonMenuImpl _carbonCommandProcessEvent:handlerCallRef:] + 104
          29 AppKit                              0x00007fff8835e176 NSSLMMenuEventHandler + 716
          30 HIToolbox                           0x00007fff8973c6d4 _ZL23DispatchEventToHandlersP14EventTargetRecP14OpaqueEventRefP14HandlerCallRec + 892
          31 HIToolbox                           0x00007fff8973bc87 _ZL30SendEventToEventTargetInternalP14OpaqueEventRefP20OpaqueEventTargetRefP14H andlerCallRec + 385
          32 HIToolbox                           0x00007fff8974fd90 SendEventToEventTarget + 40
          33 HIToolbox                           0x00007fff89785a30 _ZL18SendHICommandEventjPK9HICommandjjhPKvP20OpaqueEventTargetRefS5_PP14OpaqueE ventRef + 420
          34 HIToolbox                           0x00007fff897b8618 SendMenuCommandWithContextAndModifiers + 59
          35 HIToolbox                           0x00007fff897b85c4 SendMenuItemSelectedEvent + 178
          36 HIToolbox                           0x00007fff897b84a5 _ZL19FinishMenuSelectionP13SelectionDataP10MenuResultS2_ + 94
          37 HIToolbox                           0x00007fff897c0425 _ZL14MenuSelectCoreP8MenuData5PointdjPP13OpaqueMenuRefPt + 718
          38 HIToolbox                           0x00007fff897c0051 _HandleMenuSelection2 + 446
          39 AppKit                              0x00007fff882d079c _NSHandleCarbonMenuEvent + 284
          40 AppKit                              0x00007fff8812f56e _DPSNextEvent + 2170
          41 AppKit                              0x00007fff8812e8db -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 122
          42 AppKit                              0x00007fff881229cc -[NSApplication run] + 553
          43 AppKit                              0x00007fff8810d803 NSApplicationMain + 940
          44 libdyld.dylib                       0x00007fff868025fd start + 1
          45 ???                                 0x0000000000000001 0x0 + 1
timestamp: 14:01:01.684 Saturday 02 November 2013
process/thread/queue: Preview (828) / 0x7fff741cc310 / com.apple.main-thread
code: line 607 of /SourceCache/ViewBridge/ViewBridge-46/ViewBridgeUtilities.m in logCaughtException
domain: exceptions

When I try to export a PDF with preview, the dialog doesn't show and this error appears in the system log.
11/2/13 2:01:01.684 PM Preview[828]: -[NSRemoteView viewDidMoveToWindow] caught non-fatal NSInternalInconsistencyException 'unable to convert NSNamedColorSpace System controlColor to Device RGB colorspace' with backtrace (
          0   CoreFoundation                      0x00007fff8e24d41c __exceptionPreprocess + 172
          1   libobjc.A.dylib                     0x00007fff8a400e75 objc_exception_throw + 43
          2   CoreFoundation                      0x00007fff8e24d1f8 +[NSException raise:format:arguments:] + 104
          3   Foundation                          0x00007fff8be42c61 -[NSAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 189
          4   ViewBridge                          0x00007fff8a08165c -[NSSecureColor initWithColor:] + 724
          5   ViewBridge                          0x00007fff8a08136f +[NSSecureColor secureColorWithColor:] + 48
          6   ViewBridge                          0x00007fff8a0a4cfb -[NSRemoteView sendFontSmoothingBackgroundColorToService:] + 40
          7   ViewBridge                          0x00007fff8a0a5bf5 -[NSRemoteView viewDidMoveToWindow] + 197
          8   AppKit                              0x00007fff881461d0 -[NSView _setWindow:] + 2899
          9   AppKit                              0x00007fff88143804 -[NSView addSubview:] + 364
          10 AppKit                              0x00007fff88157953 -[NSFrameView addSubview:] + 45
          11 AppKit                              0x00007fff88165cb5 -[NSWindow setContentView:] + 511
          12 AppKit                              0x00007fff889cb233 -[NSVBSavePanel init] + 287
          13 AppKit                              0x00007fff8874d5b9 +[NSSavePanel newRemotePanel] + 309
          14 AppKit                              0x00007fff8874d675 +[NSSavePanel _crunchyRawUnbonedPanel] + 120
          15 AppKit                              0x00007fff885a54fc -[NSDocument _preparedSavePanelForOperation:] + 260
          16 AppKit                              0x00007fff885a5f6f __85-[NSDocument runModalSavePanelForSaveOperation:delegate:didSaveSelector:contextInfo:]_block_ invoke_2 + 320
          17 AppKit                              0x00007fff885d5910 -[NSDocument _commitEditingThenContinue:] + 501
          18 AppKit                              0x00007fff885d5abd -[NSDocument _commitEditingWithDelegate:didSomethingSelector:contextInfo:thenContinue:] + 138
          19 AppKit                              0x00007fff885a5e20 __85-[NSDocument runModalSavePanelForSaveOperation:delegate:didSaveSelector:contextInfo:]_block_ invoke + 375
          20 AppKit                              0x00007fff885989b8 -[NSDocument _processActivity:blockingMainThread:] + 1373
          21 AppKit                              0x00007fff88599921 -[NSDocument performActivityWithSynchronousWaiting:usingBlock:cancellationHandler:] + 220
          22 AppKit                              0x00007fff885a5c9a -[NSDocument runModalSavePanelForSaveOperation:delegate:didSaveSelector:contextInfo:] + 137
          23 Preview                             0x000000010392901b Preview + 917531
          24 AppKit                              0x00007fff8834d3d0 -[NSApplication sendAction:to:from:] + 327
          25 AppKit                              0x00007fff88368348 -[NSMenuItem _corePerformAction] + 394
          26 AppKit                              0x00007fff88368084 -[NSCarbonMenuImpl performActionWithHighlightingForItemAtIndex:] + 117
          27 AppKit                              0x00007fff883b74dd -[NSMenu _internalPerformActionForItemAtIndex:] + 35
          28 AppKit                              0x00007fff883b7359 -[NSCarbonMenuImpl _carbonCommandProcessEvent:handlerCallRef:] + 104
          29 AppKit                              0x00007fff8835e176 NSSLMMenuEventHandler + 716
          30 HIToolbox                           0x00007fff8973c6d4 _ZL23DispatchEventToHandlersP14EventTargetRecP14OpaqueEventRefP14HandlerCallRec + 892
          31 HIToolbox                           0x00007fff8973bc87 _ZL30SendEventToEventTargetInternalP14OpaqueEventRefP20OpaqueEventTargetRefP14H andlerCallRec + 385
          32 HIToolbox                           0x00007fff8974fd90 SendEventToEventTarget + 40
          33 HIToolbox                           0x00007fff89785a30 _ZL18SendHICommandEventjPK9HICommandjjhPKvP20OpaqueEventTargetRefS5_PP14OpaqueE ventRef + 420
          34 HIToolbox                           0x00007fff897b8618 SendMenuCommandWithContextAndModifiers + 59
          35 HIToolbox                           0x00007fff897b85c4 SendMenuItemSelectedEvent + 178
          36 HIToolbox                           0x00007fff897b84a5 _ZL19FinishMenuSelectionP13SelectionDataP10MenuResultS2_ + 94
          37 HIToolbox                           0x00007fff897c0425 _ZL14MenuSelectCoreP8MenuData5PointdjPP13OpaqueMenuRefPt + 718
          38 HIToolbox                           0x00007fff897c0051 _HandleMenuSelection2 + 446
          39 AppKit                              0x00007fff882d079c _NSHandleCarbonMenuEvent + 284
          40 AppKit                              0x00007fff8812f56e _DPSNextEvent + 2170
          41 AppKit                              0x00007fff8812e8db -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 122
          42 AppKit                              0x00007fff881229cc -[NSApplication run] + 553
          43 AppKit                              0x00007fff8810d803 NSApplicationMain + 940
          44 libdyld.dylib                       0x00007fff868025fd start + 1
          45 ???                                 0x0000000000000001 0x0 + 1
timestamp: 14:01:01.684 Saturday 02 November 2013
process/thread/queue: Preview (828) / 0x7fff741cc310 / com.apple.main-thread
code: line 607 of /SourceCache/ViewBridge/ViewBridge-46/ViewBridgeUtilities.m in logCaughtException
domain: exceptions

Windows 8 installation error: "We couldn't create a new partition or locate an existing one. For more information, see the Setup log files."

I recently tried testing Server 2012 for installation and I had a major issue. Windows 8 also uses the same method for installation so this should also apply to Windows 8. I thought this might be helpful for other people who have the same
problem. My setup is a 1U server with no DVD drive, no hard drives, and only USB. I have a new hard drive that I wanted to install Server onto, so I put it in and ran the installer off a thumb drive. I kept receiving the following error when
I tried to format the hard drive and proceed with the installation:
"We couldn't create a new partition or locate an existing one. For more information, see the Setup log files."
After hours of troubleshooting, I determined my problem was I was using a thumb drive to install it, and Windows didn't like it. Some people had similar issues when similar devices were plugged in (i.e. external hard drives, SD cards, CF cards, etc).
In my case, it was the installation drive itself was a thumb drive. I ended up digging up an external DVD drive and placed the installation onto a DVD. Worked flawlessly. Now I am up and running.
I tried
the steps here to no avail.
Hope this helps anyone else with the same problems.

Hi,
Thanks for sharing. We really appreciate your time and efforts. Hope your experience will help other community members facing similar problems.
Leo Huang
TechNet Community Support

OES error:Couldn't create SOAP msg:Unable to create stAX reader & writer

Hi,
I can see the below severe error in the nohup.out log file for OES.
Environment:
Unix Server 1: OES admin and SM
Unix Server 2: SM with the same name
Both the SM pointing to Server 1 admin server.
I can see the below error only on server 2. There is no such error on server1.
I donot understand while this error is coming up.
Checked all web services through SOAPUI and all web services are responding properly as expected from Server2
NOHUP.OUT
com.sun.xml.ws.transport.http.HttpAdapter$HttpToolkit handle
SEVERE: Couldn't create SOAP message due to exception: Unable to create StAX reader or writer
com.sun.xml.ws.protocol.soap.MessageCreationException: Couldn't create SOAP message due to exception: Unable to create StAX reader or writer
at com.sun.xml.ws.encoding.SOAPBindingCodec.decode(SOAPBindingCodec.java:292)
at com.sun.xml.ws.transport.http.HttpAdapter.decodePacket(HttpAdapter.java:287)
at com.sun.xml.ws.transport.http.HttpAdapter.access$500(HttpAdapter.java:102)
at com.sun.xml.ws.transport.http.HttpAdapter$HttpToolkit.handle(HttpAdapter.java:512)
at com.sun.xml.ws.transport.http.HttpAdapter.handle(HttpAdapter.java:253)
at com.sun.xml.ws.transport.http.servlet.ServletAdapter.handle(ServletAdapter.java:141)
at weblogic.wsee.jaxws.WLSServletAdapter.handle(WLSServletAdapter.java:172)
at weblogic.wsee.jaxws.HttpServletAdapter$AuthorizedInvoke.run(HttpServletAdapter.java:708)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
at weblogic.wsee.util.ServerSecurityHelper.authenticatedInvoke(ServerSecurityHelper.java:103)
at weblogic.wsee.jaxws.HttpServletAdapter$3.run(HttpServletAdapter.java:311)
at weblogic.wsee.jaxws.HttpServletAdapter.post(HttpServletAdapter.java:336)
at weblogic.servlet.http.AbstractAsyncServlet.service(AbstractAsyncServlet.java:99)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: com.sun.xml.ws.streaming.XMLReaderException: Unable to create StAX reader or writer
at com.sun.xml.ws.api.streaming.XMLStreamReaderFactory$NoLock.doCreate(XMLStreamReaderFactory.java:430)
at com.sun.xml.ws.api.streaming.XMLStreamReaderFactory$Woodstox.doCreate(XMLStreamReaderFactory.java:454)
at com.sun.xml.ws.api.streaming.XMLStreamReaderFactory.doCreate(XMLStreamReaderFactory.java:219)
at com.sun.xml.ws.api.streaming.XMLStreamReaderFactory.create(XMLStreamReaderFactory.java:172)
at com.sun.xml.ws.encoding.StreamSOAPCodec.decode(StreamSOAPCodec.java:311)
at com.sun.xml.ws.encoding.StreamSOAPCodec.decode(StreamSOAPCodec.java:135)
at com.sun.xml.ws.encoding.SOAPBindingCodec.decode(SOAPBindingCodec.java:287)
... 22 more
Caused by: com.ctc.wstx.exc.WstxIOException: Connection reset
at com.ctc.wstx.stax.WstxInputFactory.doCreateSR(WstxInputFactory.java:536)
at com.ctc.wstx.stax.WstxInputFactory.createSR(WstxInputFactory.java:585)
at com.ctc.wstx.stax.WstxInputFactory.createSR(WstxInputFactory.java:641)
at com.ctc.wstx.stax.WstxInputFactory.createXMLStreamReader(WstxInputFactory.java:344)
at com.sun.xml.ws.api.streaming.XMLStreamReaderFactory$NoLock.doCreate(XMLStreamReaderFactory.java:428)
at com.sun.xml.ws.api.streaming.XMLStreamReaderFactory$Woodstox.doCreate(XMLStreamReaderFactory.java:454)
at com.sun.xml.ws.api.streaming.XMLStreamReaderFactory.doCreate(XMLStreamReaderFactory.java:219)
at com.sun.xml.ws.api.streaming.XMLStreamReaderFactory.create(XMLStreamReaderFactory.java:172)
at com.sun.xml.ws.encoding.StreamSOAPCodec.decode(StreamSOAPCodec.java:311)
at com.sun.xml.ws.encoding.StreamSOAPCodec.decode(StreamSOAPCodec.java:136)
... 23 more
Caused by: java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(SocketInputStream.java:168)
at weblogic.utils.io.ChunkedInputStream.read(ChunkedInputStream.java:159)
at java.io.InputStream.read(InputStream.java:85)
at com.certicom.tls.record.ReadHandler.readFragment(Unknown Source)
at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.read(Unknown Source)
at com.certicom.io.InputSSLIOStreamWrapper.read(Unknown Source)
at weblogic.servlet.internal.PostInputStream.read(PostInputStream.java:177)
at weblogic.servlet.internal.ServletInputStreamImpl.read(ServletInputStreamImpl.java:228)
at weblogic.wsee.jaxws.HttpServletAdapter$RequestResponseWrapper$InputStreamWrapper.read(HttpServletAdapter.java:571)
at sun.nio.cs.StreamDecoder.readBytes(StreamDecoder.java:264)
at sun.nio.cs.StreamDecoder.implRead(StreamDecoder.java:307)
at java.io.InputStreamReader.read(InputStreamReader.java:167)
at com.ctc.wstx.io.ReaderBootstrapper.initialLoad(ReaderBootstrapper.java:250)
at com.ctc.wstx.io.ReaderBootstrapper.bootstrapInput(ReaderBootstrapper.java:133)
at com.ctc.wstx.stax.WstxInputFactory.doCreateSR(WstxInputFactory.java:531)
... 32 more
Can anyone help me out with this.
Regards,
Garima

It seems that one of the providers was mis-configured (the first service called) :
HTTP Transport Configuration
Follow HTTP redirects      DISABLED
Use Chunked Streaming Mode      ENABLED
when I enabled the HTTP redirect then the problem went away...
HTTP Transport Configuration
Follow HTTP redirects      ENABLED
Use Chunked Streaming Mode      DISABLED

Internal error 224: couldn't create /initialize the LogosManager

We keep getting an error window on boot-up:
"The DataFinder cannot start due to an internal error.
(224): Couldn't create/initialize the LogosManager
Any ideas?

Datafinder, which is what is causing this error on your machine, is only installed when DIAdem is installed. Are you using DIAdem for any of your applications? Are you communicating with DIAdem from LabVIEW in any manner? If none of your development within LabVIEW has to do with DIAdem, there is no need for the datafinder to be on your machine. If you look down on the system tray by the time, do you see a yellow cog (gear)? If so, is this cog sitting on a red or blue surface?
NickB
National Instruments
Applications Engineering

Xcode internal error "couldn't create ~/.Xcode"

hi all, I've got a fresh download of xcode 3.2.4 on snowleopard 10.6.5 and when starting a project on my usual User (which is a standard user) i get an "couldn't create ~/.Xcode" error.
I've created a new standard user and xcode works fine with it
id prefer to keep to my one usual user, any ideas?
edit - should add that if i click 'continue' then xcode launches but i'm loathe to trust it
Message was edited by: giantreign

giantreign wrote:
how do i add myself to my home folder with read & write permissions and get rid of _unknown?
In the Finder, do Get Info on your home folder. At the bottom of the Get Info window, click the + button.
The actual ownership may be incorrect so you might not be able to remove _unknown.
Another alternative would be to use the Terminal:
sudo chown $USER:staff ~

Error: couldn't create user

hi,
i have installed EP on WAS 6.40.
when i am tring to create a user i am getting the error as : "Couldn't create User".
can someone guide me as to how to resolve this issue....
please reply fast...

Hi Uday,
Can you plz tell me the version?
Did you face any problems while installing Portal?
The reason why I asked you is that I recently installed SP12 and did not face any problem. was able to create users without any problems.
Cud you plz send me some screenshots. It wud help me solve your problem better.
You may email me on [email protected]
Awaiting Reply.
Warm Regards,
Ritu R Hunjan

Error: "Couldn't create Crystal Reports Engine for report format version 10.0"

Post Author: mkubala
CA Forum: Crystal Reports
I created several reports in ClearQuest v2003.6.15 using Crystal Reports v10. When a user tries to run these reports from his machine he gets the following error:"Problems executing ReportContact your ClearQuest administrator to verify that a supported version of Crystal Reports has been installed.Couldn't create Crystal Reports Engine for report format version 10.0"My version of CR is compatible with this version of CQ and he shouldn't need CR installed to run the reports so I'm not sure what the issue is?

Post Author: nschindler
CA Forum: Crystal Reports
I have the same problem with ClearQuest 7.0.1.1, except the error contains 'version 11.0' instead of 10.0.This happened when I installed Crystal Reports XI Pro designer. I followed the procedure to manually uninstall and re-install CR, which allowed me to to author report formats, but I still get this error when trying to view report in the ClearQuest for Windows client. I tried to re-register all the CR viewer DLLs I could find, but still no luck.Any suggestions? Thanks,Nate

When creating a slideshow I get an error message when it's almost done: the operation couldn't be completed- osstatus error 9459

When creating a slideshow I get an error message when it's almost done: the operation couldn't be completed- osstatus error 9459. Help!

but I tried that earlier and the same thing happened.
Why not give us a list of all the things you've tried so we don;t waste your time - and ours - making suggestions that you know won't work?
Regards
TD

What does the error message "Sorry, but we couldn't create a repair because of the business repair mapping." mean?

What does the error message "Sorry, but we couldn't create a repair because of the business repair mapping." mean?
Trying to send it to Apple to get the battery replaced. iPhone 5S iOS 8.0

StephAnnDLC, thanks for posting. Are you still having issues with the videos? How about the battery issue? Have you tried this http://bit.ly/102vuCF and retested?^SP

Sorry, we couldn't open...Error opening office documents from SharePoint 2013 in the desktop applications

Sorry, we couldn't open...Error opening office documents from SharePoint 2013 in the desktop applications
One of our Managers encounters the error 'A problem occurred while accessing the Office document cache. Do you want to repair this problem?'
Then When he says yes it give a warning that the cache will be backed up and replaced
Then it says 'A new office document Cache has been created...'
Then it loads this cache with an error
Then After all that the next time he tries to open the document it says is encountered "Sorry, we couldn't open 'URL."
We have Reinstalled office 2013 on the users PC repaired the cache numerous times
Followed -  http://office.microsoft.com/en-gb/word-help/manually-rename-the-office-document-cache-HA101848838.aspx
Updated Lync to 2013 leaving Access as the only office 2010 application (required for legacy systems access)
Repair installed office 2010 and office 2013 again
The SharePoint site has been added to the trusted sites list and the set up assistant run from office 365
And the issue remains the Same all other users including some who also have Access 2010 for legacy systems access have no Issues OS is windows 7 32 Bit browser is IE 9
Office 365 said
Reply by Rachel Zhang MSFT Support
Hi Alex,
From your description, I notice that the issue is related to Office client. We would like to help you, but I’m sorry that our forum does not focus on this scenario and has limited resources regarding it. However, we have a dedicated support forum where
the support engineers will help you with the issues about Office client:
Microsoft Office Community:
http://answers.microsoft.com/en-us/office/forum/office_2013_release?tm=1365567547805
Feel free to sign in to the Office community and click Participate->Ask a Question to post the question with the relevant information.
Microsoft Office Community:
Feel free to sign in to the Office community and click to post the question with the relevant information.
Office team said
Hello Alex,
Thank you for posting your query in Microsoft Office Community.

Check if other excel works fine
Do you have any script\macro in excel file
Check if all application pool on all servers are running
both office and IE should be same build (64 or 32 bit)
what is the error message in ULS log and Event viewer
If this helped you resolve your issue, please mark it Answered

Operation could not be completed because an error occured when creating frame 56 (error-1)

Hi
I'm trying to export a movie in motion but I keep getting the error "Export Failed. The operation could not be completed because an error occured when creating frame xx (error-1)". I've tried some of the other suggestions such as preventing app nap, changing the codec used and I've uninstalled, rebooted, and reinstalled motion. Nothing has worked so far, and it's driving me crazy!
Can anyone suggest something? I'd be most grateful.
Thanks

Hi GFXZen, thanks for your reply.
I actually solved by re-exporting the source video, but I'll get to that (to skip, see TL;DR). In case it helps anybody else I'll answer your questions first.
The only element present at the majority of the failure points was another video, so there weren't any others to turn off. Though when I turned off the video and exported, it actually worked (this is what led me to evaluate the source video rather than the motion project).
Adjusting the export settings did not help me much, I tried h.264, same as source (which was a .mov), and ProRes 4444: failed. Tried as a draft: failed. I didn't want to mess with any of the other render settings because to be honest, I'm not a video editor, so my experience with all of this is severely limited.
I forgot to mention in the first post that I'd already tried the export on a different machine (one far newer and more powerful): failed. Dispite googling image sequences, I wasn't really sure how this related to the video, or how to set things up so the audio was preserved, so I skipped that.
TL;DR
According to what I googled, it sounded like the video needed to be reindexed/exported/whatever, so I downloaded a program MPEG Streamclip (http://www.squared5.com/svideo/mpeg-streamclip-mac.html) 1.93b8 (as the stable doesn't support Lion upward). It's completely free, and when I ran it, worked first time. I simply opened the video and exported to quicktime, and changed the compression to Apple TIFF. That was it.
There was one unusual thing though, the file I started with was just over 1GB, but the end result was just over 4GB - but visually I couldn't see any loss in quality at all, and it worked in the motion project - which is really all that matters.
Hope this helps somebody.

Unable to sign in with AppleID - "The operation couldn't be completed (CSIdentityErrorDomain error - 11.)"

Unable to sign in with AppleID - "The operation couldn't be completed (CSIdentityErrorDomain error - 11.)"
Within the System Preferences, Users and Groups - when we attempt to sign into the notebook using any AppleID - we receive the following error message:
Unable to sign in with AppleID - "The operation couldn't be completed (CSIdentityErrorDomain error - 11.)"
We have a Macbook Pro, MAC OS X Lion 10.7
This occurs whilst using any AppleID - we have tried two separate accounts.
I have created a new user profile, with administrator access, same fault occurs.
We can log in to iTunes on the notebook, the AppleID account registers and works OK.
No related articles with common Google search results.
I'm hoping to avoid a re install of the operating system if possible.
Many thanks,
Tim

Has anyone else possibly heard of this particular error? I'm really hoping to seek some support suggestions for this as it is occurring to one of our top line managers. Much appreciated.

SSPU issue: Cache directory does not exist, and couldn't create a new downl

I have installed SSPU and created an offer over there. When I run my offer it gives the error:
Cache directory does not exist, and couldn't create a new download cache directory.
Can anyone tell me the root cause and workaround for this issue?

Hi
Try deleting the "offer" directory from SSPU home and then delete the offer from Sub-Client . Restart client and then add the provider . Start pushing the content from SSPU and see if the issue still persists .
Thanks
Srinath

'Couldn't create RGB colorspace error'

Similar Messages

Maybe you are looking for