Couldn't install windows technical preview on a usb flash

Hi, 
couldn't install windows technical preview on a usb flash setup.
please say me the solution to this problem

Hi,
Any errors poped out? You may try to switch to a USB 2.0 port and check this issue again.
If you have DVD drive available, you may also choose to install Windows 10 through DVD, download the ISO file using this tool:
Windows USB/DVD Download Tool
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

  • "Couldn't Install Windows Technical Preview"

    I'm on the original install and have seen the above message several times, followed by
    "We couldn't update the system reserved partition."
    I dual boot with Windows7 on a seperate hdd. And I use EasyBCD as the switcher at boot-up.
    Any help would be appreciated. Thanks
    Paul

    Why or how did "system reserved partition" get involved ?
    All my dual booting had been done using this method.......
    http://www.howtogeek.com/197647/how-to-dual-boot-windows-10-with-windows-7-or-8/
    It works all the time. Want to give it a try ?

  • Problem installing Windows Technical Preview build 9926

    I am not able to install the Technical Preview on my computer. Everything looks fine and in the end it says "applying computer settings" and counts the percents before it reboots again.
    During the boot it says evaluation build 9926. Then it says Restoring the old windows as it was before... I can't get this to work.
    This is the windowsupdate.log file and the last attempt of installing at the end of the file. 21st of march.
    https://onedrive.live.com/redir?resid=EFA0853808EA8416!80492&authkey=!APrJtEAGwfnZydU&ithint=file%2clog

    PH
    Do you know that you can make an ISO to install 10041 and not have to install 9926?
    http://microsoft-news.com/download-windows-10-build-10041-iso-image/
    Wanikiya and Dyami--Team Zigzag

  • Hyper-V Not Enabling on Build 10041 of the Windows Technical Preview

          
    So I am running build 10041 of the Windows technical preview. I am not able to enable the Hyper-V Platform. Here are the steps:
    Go to Control Panel -> Program and Features -> Turn Windows features on or off - > Select Hyper-V Platform Checkbox.
    Windows will perform the install and request a restart.
    While restarting, I will get the updating windows message and at about 95 % it gives me a message to the tune of "Unable to update windows" and it roll backs the changes and restarts. No Hyper-V.
    Note that I can install the Hyper-V tools with out any issues just the Hyper-V Hypervisor and Hyper-V services will not install.
    Anyone have any ideas?

    So I am running build 10041 of the Windows technical preview. I am not able to enable the Hyper-V Platform. Here are the steps:
    Go to Control Panel -> Program and Features -> Turn Windows features on or off - > Select Hyper-V Platform Checkbox.
    Windows will perform the install and request a restart.
    While restarting, I will get the updating windows message and at about 95 % it gives me a message to the tune of "Unable to update windows" and it roll backs the changes and restarts. No Hyper-V.
    Note that I can install the Hyper-V tools with out any issues just the Hyper-V Hypervisor and Hyper-V services will not install.
    Anyone have any ideas?
    Can't provide an answer, but I have the same problem. I'd originally let my 9926 build, with Hyper-V installed and working, upgrade to the 10041 build. After installation things seemed OK, until I noticed I had no network connections working. They were all
    still there, but I had no network access and trying to view the properties of either my physical NIC or the Hyper-V switches just gave me an error.
    I tried uninstalling Hyper-V, but after doing that Windows wouldn't boot at all. It'd begin to start up, get almost to the login screen, but then die and reboot. I decided a rebuild would probably be best anyway, so I chose to do a Refresh when it offered
    me the advanced repair options.
    The Refresh mostly went well, the PC is running better now with a clean install, but I'm now stuck in the same situation where the Hyper-V server won't install. It installs, reboots, gets part way through configuring, then claims to fail and backs it all
    out again. No real diagnostic info presented as to why.

  • Windows To Go Device using Windows Technical Preview

    I have successfully made a Windows To Go Device by the steps in this Technet forum post:
    http://social.technet.microsoft.com/wiki/contents/articles/6991.windows-to-go-step-by-step.aspx
    Note: I used a host machine running Windows Technical Preview already to make this device, since older versions (Windows 8/8.1) of DISM don't work for imaging Windows Technical Preview Installation.
    Everything works fine. The device on which Windows To Go is running is a high-speed USB 3.0 HDD, so there is no significant performance difference. However, while updating to the new build 9860, the upgrade fails stating that you can't install it to a USB
    Flash Drive.
    Question 1) Does this problem has anything to do with the fact that I am NOT using the enterprise version of Windows Technical Preview, the only version which "technically" supports Windows To Go feature.
    Question 2) My host machine (which I used to create Windows TP) has been updated to Build 9860. Should I use DISM to capture the image of this updated build and use it to image the WTG HDD device? Can I get detailed instructions on how to do this?

    Hi G.One1,
    In current time, there is no direct way to perform the upgrade, in both Native Boot to VHD and Windows To Go.
    I was thinking a way to create a ISO file also, but the method would be a bit of complicated.
    Here is my thought and steps.
    First, if we update our Windows 10 Technical Preview for Enterprise to 9860 build, we would get a install.esd file, in Windows 8.1, here is a tool called update advisor, which would
    convert the esd file to ISO file, but in Windows 10 Technical Preview, there is no such thing. So my thought is to use the install.esd to create an install.wim or bootable ISO file.
    In my first thought, I want to sysprep an updated OS, but it failed without doubt. So, I choose to use Reset option. Install.esd would be recognized a compressed install.wim.
    I copy the install.esd to a 9841 build OS, for example, I copy it to C:\RecoveryImage, and run
    reagentc.exe /setosimage /path C:\RecoveryImage /target c:Windows /Index 1 , it cannot reset the Windows OS.
    I use Reset option in 9860 build OS, when it is finished, run sysprep, it ran well, I can capture 9860 build wim file (WDS server capture or dism command). We rename it as install.wim.
    Use the captured install.wim to set recovery image in 9841 build(copy install.wim to C:\RecoveryImage, and run
    reagentc.exe /setosimage /path C:\RecoveryImage /target c:Windows /Index 1), 9841 build succeed upgrade to 9860 build via Reset and Refresh options.
    For Windows To Go, Yes, you can use all Windows features with your Windows To Go workspace. The only currently unsupported features are using the Windows Recovery Environment and PC Reset &
    Refresh. So this way is not appropriate in your situation. But here we use these steps can convert the install.esd to install.wim, and use reset and refresh option to upgrade current build.
    Refresh would upgrade without losing setting and data. For your scenario, use dism to apply 9860 install.wim would be your option.
    Alex Zhao
    TechNet Community Support

  • Adding features to Windows Technical Preview

    Why serial code not work with Windows Technical Preview evalution copy Build 9879?
    Add features to Windows Technical Preview and asks for serial key, two different serial key but not work.

    Hi,
    Where did you get the product key? Online purchase is not available at this moment (my region is set to US), and please note that the product key for "Add feature" is not the same key for activating system.
    If you have any feedbacks on Windows 10 Technical Preview, please click the search botton in the left bottom of the screen, type "Windows Feedback", then submit your feedback.
    Regards.
    Yolanda Zhu
    TechNet Community Support

  • Is Windows Technical Preview Build 9926 Last Build before Release (PC) ??

    As @ Mar 14 2015 - My WIN10 build Installations (9926) no longer have "Preview Builds" option,
    in Update & Recovery Menu (PC Settings)
    Build 10036 announced by rumour mill...
    Dell Precision 490 Desktop Intel XEON X5365 (Quadcore) x 2 Chipset X5000 321x/3221ESB Southbridge AMD Radeon HD7750 HDD ST3000DM001 3TB HDD ST2000DM001 2TB SSD OCZ Vertex 3 120GB SSD OCZ Vector3 128GB x2 RAID 0 Offline WD10EALX 1TB Barracuda 7200.10 250GB
    USB 3.0 WD MyBook 1230 3TB USB 3.0 WD MyBook 1130 2TB

    Microsoft Community got there first...
    http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/is-windows-technical-preview-build-9926-last-build/bb0bed43-4d64-4e1b-acaa-fee158f034ce
    Thanks Andre da Costa
    Dell Precision 490 Desktop Intel XEON X5365 (Quadcore) x 2 Chipset X5000 321x/3221ESB Southbridge AMD Radeon HD7750 HDD ST3000DM001 3TB HDD ST2000DM001 2TB SSD OCZ Vertex 3 120GB SSD OCZ Vector3 128GB x2 RAID 0 Offline WD10EALX 1TB Barracuda 7200.10 250GB
    USB 3.0 WD MyBook 1230 3TB USB 3.0 WD MyBook 1130 2TB
    We only reply to questions posted in TechNet forums.
    We don't go to MS Community and find out if the same question has been answered or not before we post the replies.
    There is no such thing as who gets "there" first.

  • Officejet Pro K550 in Windows Technical Preview

    The most recent update to Windows Technical Preview Build 9879 keeps stopping the print spooler when the Officejet Pro K550 is attached. It worked fine in the previous builds. Any ideas? I need to keep the USB cable disconnected until I want to print and then uninstall the printer each time or keep restarting the print spooler each time I want to print anything.
    Thanks

    Hi,
    Try running Windows Update and check if any driver update is available, any drivers for the Technical Preview are only available from Microsoft Update servers.
    If the issue persists, you will need to wait till an update will become available by microsoft, as a beta OS you are likley to experience this kind of issues, devices hasn't have been tested much, as well as the entire operating system.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • How can I install Windows 8.1 using a USB Pen Drive in Late 2011 Macbook Pro with DVD R/W given.

    How can I install Windows 8.1 using a USB Pen Drive in Late 2011 Macbook Pro with DVD R/W given.
    I have Boot Camp 5.1.2 (497) and there is no option for installing using USB. I have downloaded an image of Windows 8.1 already.
    I can't install using DVD R/W because it's not working.
    Please help me.
    Thank you.

    unlocked by myself
    thanks

  • Can I install windows 7 to an external USB 3.0 drive via bootcamp?

    with the new airport extremes supporting USB 3.0, can I install windows 7 to an external USB drive via bootcamp?
    i'm not willing to sacrafice any of the limited space on the SSD, but i'm very willing to get a good performing USB 3 drive, and use it as necessary with windows.
    if this wouldn't work via bootcamp, can it be done on a windows PC and plugged in subsequent to the install to work on the road?

    Installing Windows on an external drive is not supported.

  • HT3986 This what my boot camp says , when ever i am trying to instal windows 7 ''There is no USB drive connected to the system. Please insert a USB drive to continue.    "' Can someone help me . ?

    This what my boot camp says , when ever i am trying to instal windows 7 ''There is no USB drive connected to the system. Please insert a USB drive to continue.

    pump

  • How to install Win 7 on Mac using USB flash drive....???

    How to install Win 7 on Mac using USB flash drive....???

    clintonfrombirmingham wrote:
    I thought that installation through Boot Camp required, without hacks, a physical optical disc to install Boot Camp? I don't use it any longer since I run XP under Parallels, but I would swear that you have to use a disc, and not a USB thumb drive, to install Windows?
    Maybe some real Boot Campers will visit this thread...
    Clinton
    If you have the Media you can use it to create a bootable USB key via boot camp assistant.
    It will create the usb and has the option of pre-downlading the drivers and bootcamp utilities for windows.
    It is pretty much all automated and quite simple.

  • Windows 10 to be free upgrade for first year for users of Windows Technical Preview?

    Hello, in article I have read that will upgrade to Windows 10 users for free Win 7 & 8.1. I want to ask how it will be with those who use a version of the technical prewiev. I will also have a free update?
    Thanks for the answers
    Vít Repka

    after 1 year if I do not want to purchase the upgrade, what happen to my computer, will go back to window 7?
    What do you mean?  You've already installed the Win 10 tech preview and you're wondering if it will automatically revert to the old software you were running some months ago after the trial period expires?
    LOL
    No.
    Your expired Win 10 preview will pop up an "expired" notice and become less usable.  Assuming it works like all other trial periods of Windows, it will limit its functionality and start shutting itself down every few hours.  If you
    want to revert it, it will be up to you to reinstall the old version.  And then can anyone guarantee that it will reactivate properly?
    Beyond that, and to the original point of this thread, what the mechanics will actually be for upgrading to Win 10 after its release on a system that was originally properly licensed for an earlier version of Windows are still not clear.  We'd like
    to hope that a product code for a legitimate licensed copy of an older version would just work to install Windows 10 from a DVD (ISO), but no doubt it will be more complicated than that.  It shouldn't be, but it almost certainly will be.
    -Noel
    Detailed how-to in my eBooks:  
    Configure The Windows 7 "To Work" Options
    Configure The Windows 8 "To Work" Options

  • Unable to install Windows 10 Preview in Hyper V in Windows 8.1

    Hi All,
    I have a strange issue in my Hyper V in Windows 8.1 . I download the Windows 10 Technical preview ISO from the Technet Evaluation center and when i try to make a Gen 2 VM and attach the downloaded ISO it gives me the below Error.
    Has any one faced this issue before ? If yes any solutions ?
    Gautam.75801

    Hi,
    I've found this:
    http://www.danielclasson.com/hyper-v-issue-when-starting-virtual-machine-from-downloaded-iso-file/
    basicly saying you should try copy the iso, and mount that copy.
    best regards
    jesper vindum, denmark

  • Error when try to install windows 8.1 from UEFI USB

    Hello !
    I have prepared a UEFI USB flash drive installation for Windows 8.1, as described in this link :
    http://www.nextofwindows.com/how-to-make-uefi-bootable-usb-flash-drive-to-install-windows-8/
    The computer is on UEFI mode.
    Now the computer boot from the USB flash drive, but after some seconds, I get an error message on a blue screen:
    Your pc need to be repaired
    The application or operating system couldn't be loaded because a required file is missing or contain errors
    File \windows\system32\boot\winload.efi
    Error code :0xc0000359"
    It’s strange because the hard drive has no partitions, and the USB flash drive doesn’t have a path path like
    \windows\system32\boot\winload.efi.
    What is happening and what should I do?
    Thank you !

    Hi,
    When install Windows on UEFI mode, you need to convert your disk to GPT firstly. Therefore, please check if your disk was already converted to GPT partition style.
    On the other hand, you can access to the link below which talking about how to install Windows using UEFI partition style.
    https://technet.microsoft.com/en-us/library/dn336946.aspx?f=255&MSPPError=-2147217396
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Maybe you are looking for

  • PLEASE HELP ME!! Ipod not recognised in i-tunes or by computer

    My pod used to be recognised!! No probs, but now for some reason there is no "device" tab at the side and no recognition of it anywhere. But it still charges when plugged in?! I have tried the 5 Rs (as much as I can- can't do the last one because the

  • Adding EOF to XML file without using FCC

    Hello Experts, I have a simple File to File scenario with source and target files being XML  and simple mapping (No content conversion necessary). The issue which I face is described below: File is written by receiver File Adapter on the unix system,

  • Validation for selection screen

    hi all,    can anyone help me on the particular issue for adding f4 functionality based on selection criteris.i am using the code below but i am not able to get the selection.   SELECTION-SCREEN: BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.      PARA

  • Portal calendar - new record link problem

    We have a problem with calendars (Portal 9.0.2). We have: A form to enter/edit records in a table. A link to this form. A calendar based on the table in question. If I try to connect the calendar to this form (for entering new records) I set it up in

  • After reformatting drive - folder with question mark appear

    I am using an iMac 2010 I was planning to reformat it and install the OS Maverick from my drive but after formatting (which delete all the files from it's hard drive) after restarting a blinking question mark appears I have a wireless keyboard and mo