Couldn't open module bitmap and pcidata

hi all! i just finished to install, updating and configuring ARCH 0.7.1.
I installed fluxbox, nvidia drivers but when i type startx comes up an xorg error log which says me that cannot find bitmap and pcidata modules..
Xorg is at 7.0 version and i tried remove-reinstall but nothing solved..
Here is the log
Thanks a lot for your precious help!!
X Window System Version 7.0.0
Release Date: 21 December 2005
X Protocol Version 11, Revision 0, Release 7.0
Build Operating System:Linux 2.6.15-ARCH i686
Current Operating System: Linux myhost 2.6.16-ARCH #1 SMP PREEMPT Mon Apr 24 23:11:22 CEST 2006 i686
Build Date: 20 March 2006
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Apr 30 21:12:24 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Xorg Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Keyboard0"
(**) Option "XkbRules" "xorg"
(**) XKB: rules: "xorg"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(WW) Option "XkbLayout" requires an string value
(**) Option "XkbVariant" "nodeadkeys"
(**) XKB: variant: "nodeadkeys"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "USB Mouse"
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/misc".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/misc").
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/misc".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/misc").
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/75dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/75dpi").
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/75dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/75dpi").
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/100dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/100dpi").
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/100dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/100dpi").
(WW) The directory "/usr/X11R6/lib/X11/fonts/PEX" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/cyrillic".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/cyrillic").
(WW) The directory "/usr/X11R6/lib/X11/fonts/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ttf/western" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ttf/decoratives" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/ttf-bitstream-vera" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/defoma/CID" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/defoma/TrueType" does not exist.
Entry deleted from font path.
(WW) FontPath is completely invalid. Using compiled-in default.
(==) FontPath set to "/usr/share/fonts/misc,/usr/share/fonts/75dpi,/usr/share/fonts/100dpi,/usr/share/fonts/TTF,/usr/share/fonts/Type1"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(**) Option "AllowMouseOpenFail" "true"
Couldn't open RGB_DB '/usr/X11R6/lib/X11/rgb'
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.8
X.Org XInput driver : 0.5
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(WW) Warning, couldn't open module bitmap
(II) UnloadModule: "bitmap"
(EE) Failed to load module "bitmap" (module does not exist, 0)
(II) LoadModule: "pcidata"
(WW) Warning, couldn't open module pcidata
(II) UnloadModule: "pcidata"
(EE) Failed to load module "pcidata" (module does not exist, 0)
Fatal server error:
Unable to load required base modules, Exiting...
(WW) xf86CloseConsole: KDSETMODE failed: Bad file descriptor
(WW) xf86CloseConsole: VT_GETMODE failed: Bad file descriptor

stonecrest wrote:Does your /etc/X11/xorg.conf have the right path for the modules directory? Since it looks like your fonts path is wrong, I'm guessing your modules path is wrong as well. If you upgraded to xorg7 from 6.*, you have to make some changes.
yes i upgraded from 6.8 to 7.0! i solved with a
xorgconfig
just now but..in the future..what i have to change if i upgrade from 6 to 7? is not enough run again
hwd -x
to create a new xorg.conf for the new xorrg 7.0?

Similar Messages

HT4623 I've updated to IOS6 and now i couldn't open any apps and they're automatically close. And can't sync with itunes properly.. Help me!!

I've updated to IOS6 and now i couldn't open any apps and they're automatically close. And can't sync with itunes properly.. Help me!!

Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

HT204053 i couldn't open new terms and conditions of icloud, and so i can't use the icloud on my device iphone 5, this problem appears, when I get new ios 7

i couldn't open new terms and conditions of icloud, and so i can't use the icloud on my device iphone 5, this problem appears, when I get new ios 7

Try download the Find My Friends app and signing in to accept the terms and conditions there.

I couldn't open my iTunes and now I can't install iTunes

Hi, I couldn't open my iTunes last week. I kept getting an error message and a note saying it would send a report to apple. My friends suggested uninstalling iTunes and reinstalling it so, I followed the steps from this link (http://support.apple.com/kb/HT1224) to uninstall iTunes. When I tried installing iTunes I got the following message "There were errors with the installation. You may want to try installing again. (Huge exclamation point) The installation failed. The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance." I have tried a few times to reinstall and have had gotten this message every single time. Also, when I tried backing up my iTunes library incase I had to reboot my computer, everything that was purchased from the iTunes store had an error message behind it. My Amazon music was fine and copied over problem free, but my iTune music was very wishy-washy. I'm at a loss about what to do now. Does anyone know what to do?

There is a knowledge base article devoted to this already. Do you still have a technical issue you need help with?
iOS: Troubleshooting Wi-Fi networks and connections

Function module for open sales order and open PO

hi all,
can anyone please tell me that is there any function module to get open sale order and also for open purchase order?
regards saurabh.

Hi ,
In EKPO Table u select this fields Purchase Document no and Item no of Purchsing Document , Material no , and Purchase Order Qty.
In MSEG Table u select this fields Purchase Document no and Item no of Purchsing Document , Material no , and Qty.
Both Tables having Purchase Document no , So Purchase Doucment no throguh u will get the Material and qty , Finally u Subract the both Material Qty's .
u will get the Open Po For particular Material.
If ur not getting ,Inform me .
Regards ,
Shankar GJ

Open module for managing property file and environment variables

Looking for an open module for managing property files and environment variables (like CLASSPATH) set in a shell script. For handeling properties (preserving comments, supporting includes, appending new entries, and more) I have looked at SuperProperties from openadaptor but find certain functionality lacking. As for interfacing with common shell scripts/files containing setting for CLASSPATH, JAVA_HOME, other system/application variables another type of object editor is needed. Maybe JFIG?
Any ideas are greatly welcomed.

You seem wright, you hit a brick wall here with Air to find the location
of the command console on windows...
So in fact I never build an exe tool, but this little problem was a nice
case to test it and I tried it.:
I downloaded monodevelop
-GTK# for .NET 2.12.10*
-MonoDevelop 2.4.2*
from http://monodevelop.com/Download
created a console project and had an exe in 5 minutes !
You can download the findconsole tool and the projectfiles here:
http://greencollective.nl/temp/dump/findconsole_monoproject.zip
findconsole.exe will reveal the path/location of cmd.exe on a windows system.
Cheers,
Latcho

Getting Error message couldn't open XPCOM and can't open ANY pages

After load of updates were completed, I keep getting this Error 'COULDN'T OPEN XCOM' I can't open any programs or emails, Firefox won't open or IE. Have tried System Restore a number of times without any luck, even that doesn't complete successfully, starting to tear my hair out now.

This is usually a problem with a failed update that caused a corrupted installation that still has older files.
Do a clean reinstall and delete the Firefox program before (re)installing a fresh copy of the current Firefox release.
*Download the full Firefox installer and save the file to the desktop<br>http://www.mozilla.org/en-US/firefox/all.html
If possible uninstall your current Firefox version to cleanup the Windows registry and settings in security software.
*Do NOT remove "personal data" when you uninstall your current Firefox version, because this will remove all profile folders and you lose personal data like bookmarks and passwords including data in profiles created by other Firefox versions.
Remove the Firefox program before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Woke up this am and opened Finder to find no sign of HD icon or a data stick I'd inserted. Couldn't open or eject the data stick as a result. Is there a way around this?

Woke up this am and opened Finder to find no sign of HD icon or a data stick I'd inserted. Couldn't open or eject the data stick as a result. Is there a way around this? Can I reconfugure my Finder to show the HD Icon and also to display data stick or external drives?

"Shut Down" the machine (not Sleep), remove the data stick, then power on the machine.

My mac has been updated and when i go to install the newest itunes this pops up. 'Couldn't open "Install iTunes.pkg". This package type requires Mac OS X 10.5.' how can i fix this so i can get the new itunes?

my mac has been updated and when i go to install the newest itunes this pops up. 'Couldn't open "Install iTunes.pkg". This package type requires Mac OS X 10.5.' how can i fix this so i can get the new itunes?

Hi
Try to use "software update" option
to to apple menu -> software update or system preference -> Software update
( you may try to use an old package on new system )
HTH

HT200250 I couldn't open the files from a Canon XF 300 so I downloade the plugin from Apple but still can't open the files. I opened and clicked on the installer icon. I'm not sure the plugin was actually installed. can anyone help?

I couldn't open the files from a Canon XF 300 into Final Cut Pro 7, so I downloade the plugin from Apple but still can't open the files. I opened and clicked on the installer icon. I'm not sure the plugin was actually installed. C
an anyone help?
Message was edited by: BigDealCam123

As you probably know the Canon plug-in enables Log & Transfer in FCP7. I'm not sure whether it works with Final Cut Express or not.
Look in Applications>Canon Utilities. I'm running 10.6 as well and that is where it's located on my machine.
Good luck.
Russ

I installed Adobe over a month ago when prompted that my trial was expired. We pay 19.99 a month, and when signed in it states our next payment is due Feb 5, 2015. Yesterday I got a prompt that my trial was expired and I couldn't open any pdf files anym

I installed Adobe over a month ago when prompted that my trial was expired. We pay 19.99 a month, and when signed in it states our next payment is due Feb 5, 2015. Yesterday I got a prompt that my trial was expired and I couldn't open any pdf files anymore. I uninstalled and reinstalled and it worked all morning until just now, now it is prompting me that the trial is expired AGAIN. What do I do to fix this permanently??

You installed Adobe what? Assuming that perhaps you have a subscription for Acrobat XI Pro, I will move your post to the appropriate forum. You could also try to Contact Customer Care.
[topic moved to Acrobat.com Services forum]

Upgrading from snow leapord to mavericks, i couldn't opened app store, messenger, ibook,FaceTime, maps and other. please help

upgrading from snow leapord to mavericks, i couldn't opened app store, messenger, ibook,FaceTime, maps and other. please help

Try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About
If that doesn't work, do a backup. Boot to the Recovery Volume (command - R on a restart or hold down the option key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors. Then reinstall the OS.
OS X Recovery
OS X Recovery (2)

I exported my iBook and got the .ibooks file on my Desktop(iMac Retina 5K), I tried to put the file into the iBooks application but I get a message that says "The file "______.ibooks" couldn't opened because it isn't in the correct format.

I exported my iBook and got the .ibooks file on my Desktop(iMac Retina 5K), I tried to put the file into the iBooks application but I get a message that says "The file "______.ibooks" couldn't opened because it isn't in the correct format. I took the same file and transferred it in my MacBook Air and was able to put it in the iBooks application no problem, the MacBook Air runs OS X v 10.9.5
Please advise as to Why it would work on an older OS X version as oppose to the newer OS X Yosemite
Thanks
JP

Thanks Lyra,
I may be doing something wrong because looking at the "Purchased" in iBooks I only see all the books that I actually purchased, none of the iBooks that I created in iBooks Author shows up. I can re-download all the iBooks I've purchased and some in iCouds, but the ones I've created in iBooks Author are no where to be found.
Any help is much appreciated,
Best Regards,
JP

HT4623 Hi,This morning I had software updated my iPhone 4s and then I couldn't open again.One the iphone screen,it appears me to ask plug in iTunes and which i did but can't restart my phone.Please help me

Hi,This morning I had software updated my iPhone 4s and then I couldn't open again.One the iphone screen,it appears me to ask plug in iTunes and which i did but can't restart my phone.Please help me

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...

Jolly Giant gave good advice re. ITunes and unable to download the latest version on my older Mac Mini. I downloaded ITunes 9.2 as he suggested but came to a standstill at the place where we "agree" w Couldn't open without Iwork (don't have) Help!

Jolly Giant gave good advice re. ITunes and unable to download the latest version on my older Mac Mini. I downloaded ITunes 9.2 as he suggested but came to a standstill at the place where we "agree" with terms. Couldn't open this without Iwork which I don't have. Help! Carolyn

Hello, no way you should need iWork to "Agree"!?
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
And if you're really at 10.4.2, then get this and apply it...
The combo update for PowerPC-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateppc.html
Repair Permissions afterwords, reboot.

Couldn't open module bitmap and pcidata

Similar Messages

Maybe you are looking for