"couldn't set locale correctly" after jumpstart
Hi Guru,
I've encountered the message of
"couldn't set locale correctly" after jumpstart install of solaris 8 in Netra Sun machine.
I found the Java version is 1.2.2,
may I know how can I upgrade to Java 1.4.2?
Kindly advice.
Thank you very much.
Regard,
Goon Fui
Hi,
Looks like the locale is not set correctly.
You may set your environment.
From bash shell
bash# export LC_ALL=C
bash# export LANG=C
for c -shell.
setenv LC_ALL C
setenv LANG C
Hope this helps.
Regards
Pravat
Anytime I restart a server or perform any other
functions in my DSCC console I get errors saying
"couldn't set locale correctly". Everything works
fine but I still get the errors.
When I do a "locale" at the prompt I get the
following:
LANG=
LC_CTYPE="C"
LC_NUMERIC="C"
LC_TIME="C"
LC_COLLATE="C"
LC_MONETARY="C"
LC_MESSAGES="C"
LC_ALL=
Can anyone tell me what I need to do to fix this
problem?
Thanks,
MattIn your m/c fonts may not have set properly
Similar Messages
-
PT880 Bios Setting Not Correct After Bios Flash
Hey guys. Flashed bios from 1.1 to beta 1.5 and am now experiencing this problem. I get the message Bios settings not correct. After loading defaults all I get is my monitor going in to "sleep" mode. The only way to get PC to post is to clear the CMOS jumper. I find it odd that my PC booted to Windows fine with 1.1 and now this problem. The reason I flashed to beta is because I have a 2.4a prescott and heard that the beta is more compatible. Any ideas?
Quote
Originally posted by rsix
I am running at 3.06 right now. Dont ask me what I did.. it just started accepting my OC changes in bios. The only thing I did was install core center and play a bit. After finding that it sucked I uninstalled it. Went into bios and upped my FSB in 5mhz increments. I also loaded optimized defaults first disabling the dynamic OC and the usual settings and changed vcore to 1.425. I still cant get past 3.06, when I try higher, the PC restarts when trying to load windows. Ive tried bumping vcore in increments to 1.5, Northbridge up two notches, AGP at 1.7, RAM at 1.75 all with no luck. I dont want to get too gready but as my temps idle at 40C I feel I have more room to work with. I am going to try and manually enter my mem timings if I can find them and see what happens.
Another thing I've found. When you change the FSB in the bios and it does not boot, wait a while and see what happens. For me about a minute later it finally rebooted and posted but the FSB setting went back to default. You may not have to clear cmos if you wait long enough.
Good point about letting it sit----and then it will finally reboot after about a minute----back to FSB 200---this worked for me a couple of times.
In Bios-----one of the tricks I did was to set the DDR to 466 and 500 and then see how that affected other bios settings----without going ahead and posting.
It showed me that it jumped up my voltages on AGP, VDIMM and Northbridge (and I think soutbridge as well)
Anyway----went back into bios and reset the DDR to 400----1:1----then raised all those voltages---then set my FSB up to about 230. That was really about the highest I could get with any stability. And that just doesn't cut it with a 2.4c which I've known to easily overclock to around 3.2 on an 875 or 865 board.
That's why I think a 3.0c is a good chip for this VERY inexpensive board. At 230 FSB You are doing 3.45 Mghtz which ain't too shappy
Best timings for me were Cas 2.5 4,4,8 and changing the Vlink settings really did nothing that I could tell for performance or stability.
Good Luck----let's us know how it turns out-----John -
Hello,
I'm installing locale nam (en_US.UTF-8) from solaris 10 DVD as follows in a non-global zone:
localeadm -a nam -d /cdrom/sol_10_807_sparc/s0/Solaris_10/Product
It does install some packages and then prompts :
No solaris3 image has been found in
/cdrom/sol_10_807_sparc/s0/Solaris_10/Product
Please enter the path to this image/disk, or enter 'q' to quit:
(if this image is on CD-ROM, please mount the disk and give the path to the CD-ROM drive e.g. /cdrom/cdrom0)
But i dont know which DVD to insert because i have only one.
I select quit and then type locale -a:
# locale -a
C
POSIX
en_AU.ISO8859-1
en_AU.UTF-8
en_CA
en_CA.ISO8859-1
en_CA.UTF-8
en_NZ.ISO8859-1
en_NZ.UTF-8
en_US
en_US.ISO8859-1
en_US.ISO8859-15
en_US.ISO8859-15@euro
en_US.UTF-8
es
es_MX
es_MX.ISO8859-1
fr
fr_CA
fr_CA.ISO8859-1
iso_8859_1
Then i set LANG and LC_ALL variables for a user to en_US.UTF-8 and i get the error:
couldn't set locale correctly
Please advise how to correct this. Is it due to the additional DVD required...thanks Pascal,
I tried the command but still same problem:
Checking for a solaris3 in config file
|.|
No solaris3 image has been found in
/cdrom/sol_10_807_sparc/s0/Solaris_10/Product
Please enter the path to this image/disk, or enter 'q' to quit:
(if this image is on CD-ROM, please mount the disk and give the path to the CD-ROM drive e.g. /cdrom/cdrom0)
any other suggestions? -
Set Locale problem (Solaris)
Hello all,
I'm having problems to use the "pt_BR" locale at solaris. every time i try to start my weblogic with the locale set to pt_BR (LANG=pt_BR) i get an error message saying "could not set locale correctly".
Anyone here can help me ??? (PLZ!!)
Thank youevery time i try to start my weblogic with
the locale set to pt_BR (LANG=pt_BR) i get an error
message saying "could not set locale correctly".Check if the variables listed by "locale" are set to a value listed by "locale -a" otherwise you might get the error message you mentioned.
HTH Jochim -
Machine fails to boot after setting locale
Hi,
I am trying to set the locale during the jumpstart. In my profile I set
locale en_US.UTF-8and in sysidcfg I set
system_locale=en_US.UTF-8The locale is correctly installed and /etc/default/init looks like
TZ=Europe/Stockholm
CMASK=022
LANG=en_US.UTF-8However when I type locale, I get
# locale
LANG=C
LC_CTYPE="C"
LC_NUMERIC="C"
LC_TIME="C"
LC_COLLATE="C"
LC_MONETARY="C"
LC_MESSAGES="C"
LC_ALL=Using some info from
http://docs.sun.com/app/docs/doc/817-2521/6mi67tj5d?a=view
I changed the /etc/default/init to look like
TZ=Europe/Stockholm
CMASK=022
LANG=en_US.UTF-8
LC_ALL=""
LC_CTYPE=""
LC_NUMERIC=""
LC_TIME=""
LC_COLLATE=""
LC_MONETARY=""
LC_MESSAGES=""However when I reboot my machine, I get the following error from SVC:
Boot device: /pci@7c0/pci@0/pci@1/pci@0,2/LSILogic,sas@2/disk@0,0:a File and args:
SunOS Release 5.10 Version Generic_118833-18 64-bit
Copyright 1983-2005 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
libscf.c:2060: scf_pg_get_property() failed with unexpected error 1007. Aborting.
Sep 1 16:26:50 svc.startd[11]: restarting after interruption
libscf.c:2060: scf_pg_get_property() failed with unexpected error 1007. Aborting.
Sep 1 16:26:51 svc.startd[14]: restarting after interruption
libscf.c:2060: scf_pg_get_property() failed with unexpected error 1007. Aborting.
Requesting maintenance mode
(See /lib/svc/share/README for additional information.)
Root password for system maintenance (control-d to bypass):Any ideas?I booted up the system in failsafe, than he asked me do i want to mount rw the / fs? tap y
then chmod 755 /a/etc/default/init
vi /a/etc/default/init
erase the LC_ALL line, and save, chmod 555 /a/etc/default/init
then reboot
it worked me fine -
After Effects warning: couldn't set Quicktime video output display mode
After Effects warning: couldn't set Quicktime video output display mode
I'm getting this error when exporting video from after effects. I also get it when the program starts up. I'm using Windows XP. Cannot find anything about a fix anywhere. Does anyone know how to fix this?Thanks for your reply. I profess ignorance regarding the GDI only mode and have no idea how to access that. Can you give me a little more info on that?
I am using an ATI Radeon HD 3850. I have two monitors on that card, Monitor one is a Trinitron HP 1130 CRT.(set to 1280x1024 16bit) The other is DVI wide screen Ilo 26 inch monitor. (1024x768 at 32 bit)
I have a BlackMagic Design DECKLINK standard definition broadcast card which outputs component video to a sony broadcast Beta deck. 480ix720 standard video.
The machine has a gigabyte motherboard. Intel Core 2 quad cpu 2.66 ghz
2.50 gb ram reported (4gigs installed)
These hasn't been a major issue as I can still output AVI uncompressed but it is annoying.
John -
ITunes Music Folder will not play from external hardrive after setting the correct path
I've decided to try and create some more space for my music collection and decided to keep my entire iTunes library on a portable external hardrive. I researched how to do so online and was successful at first. I set the correct path from the advanced menu so that iTunes would recognize and save music to the folder on my HD. It worked fine last night, but today when I try and access it I get the, "could not be used because the original file could not be found. Would you like to locate it?" error message when I try and play a song anywhere in iTunes. I then tried to import the library from my external hardrive and then everything was duplicated. I some how reversed the duplication by using time machine and then redownloading iTunes, which is a riduculous story in itself, but thankfully, I am back at square one.
I have over 24,000 songs with a majority of them rated as well as playlists I do not want to lose. I don't understand why it will not play the songs. Can anyone help me?If you are going to have the library on an ext HD the transfer the entire iTunes folder. This way you capture all the files - not just the music.
Launch iTunes with the 'option' key down and follow the dialog - tell iTunes to open the iTunes library file on the ext HD and things should be ok.
MJ -
Im trying ti make an in-app purchase but its not allowing me even though my apple account is set up correctly
Have you checked your Restrictions > http://support.apple.com/kb/HT4213
Kyskyhar3 wrote:
... my apple account is set up correctly
To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
WDDOINIT - SET LOCAL LANGUAGE out of parameter
Hello,
What I want to do is set the local language with an URL param.
I tried two way which ended in a dead end.
1. Read the param in the default handler:
- In the Default handler it is possible to read params out of the URL
- But it seams that it is to late to set the language with SET LOCALE LANGUAGE at this time
2. Set Param in mehod WDDOINIT
- When I set the language hardcoded in this method all works fine (textalias from otr will be displayed in correct language)
- Bu it seams that there is no possibility to read the param in this method
Does anybody have an idea how can I solve this Problem?
ThanksHm, it depends when you instantiate the corresponding texts in your Webdynpro Component.
The "default handler" is the "HANDLEDEFAULT" method of the Window?
This is called very late in the instantiation of the Component. The default texts should be read at this time.
It may be a solution to build a WebDynpro-Component as framework that instantiates the needed Component after the Inbound is handled.
(You can do this by defining your WDC as usage in the framework WDC.)
Then you change the language by the imported URL-parameter in the frameworks-Inbound handler method.
Then instantiate the embedded WDC (the one containing your application logic).
This should then use your newly set language settings. -
Oradism not set up correctly error in the alert log in 9.2.0.4
Hello,
I have installed 9.2.0.4 patch on top of 9.2.0.1 database.
The O/S is Solaris 5.9
The database is set to work with:
workarea_size_policy=AUTO.
The database is not working properly compared to other machines we have.
After looking in the alert log I found the following error popping after restart:
WARNING: -------------------------------
WARNING: oradism not set up correctly.
Dynamic ISM can not be locked. Please
setup oradism, or unset sga_max_size.
[diagnostic 0, 16, 5001]
I found the following two notes on the subject, contradicting each other and also contradicting the status of the machine:
Note:151222.1
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=151222.1
Telling me not to do the below procedure on 9.2.0.4, though I get the same error and miss the required etc entries specified.
Note:262886.1
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=262886.1
Telling me to copy oradism.sav to oradism and I already have those.
Can you please supply a full and DETAILED procedure regarding what should I do, in case it is not a procedure, please specify how I should solve the oradism not set up correctly error.
Tal Olier
[email protected]Hi Tal,
Just looked at the notes you referred to. The first doesn't apply to 9.2.0.4. as you state. The other note is for 9.2.0.4e (note the "e", stands for embedded). This "e" release is not what you have, so that note doesn't apply either.
The AR that I referred to is for 10g, but the 9iR2 info is the same. You need to make sure that $ORACLE_HOME/bin/oradism is owned by root. -
How to set the correct shared pool size and db_buffer_cache using awr
Hi All,
I want to how to set the correct size for shared_pool_size and db_cache_size using shared pool advisory and buffer pool advisory of awr report. I have paste the shared and buffer pool advisory of awr report.
Shared Pool Advisory
* SP: Shared Pool Est LC: Estimated Library Cache Factr: Factor
* Note there is often a 1:Many correlation between a single logical object in the Library Cache, and the physical number of memory objects associated with it. Therefore comparing the number of Lib Cache objects (e.g. in v$librarycache), with the number of Lib Cache Memory Objects is invalid.
Shared Pool Size(M) SP Size Factr Est LC Size (M) Est LC Mem Obj Est LC Time Saved (s) Est LC Time Saved Factr Est LC Load Time (s) Est LC Load Time Factr Est LC Mem Obj Hits (K)
4,096 1.00 471 25,153 184,206 1.00 149 1.00 9,069
4,736 1.16 511 27,328 184,206 1.00 149 1.00 9,766
5,248 1.28 511 27,346 184,206 1.00 149 1.00 9,766
5,760 1.41 511 27,346 184,206 1.00 149 1.00 9,766
6,272 1.53 511 27,346 184,206 1.00 149 1.00 9,766
6,784 1.66 511 27,346 184,206 1.00 149 1.00 9,766
7,296 1.78 511 27,346 184,206 1.00 149 1.00 9,766
7,808 1.91 511 27,346 184,206 1.00 149 1.00 9,766
8,320 2.03 511 27,346 184,206 1.00 149 1.00 9,766
Buffer Pool Advisory
* Only rows with estimated physical reads >0 are displayed
* ordered by Block Size, Buffers For Estimate
P Size for Est (M) Size Factor Buffers (thousands) Est Phys Read Factor Estimated Phys Reads (thousands) Est Phys Read Time Est %DBtime for Rds
D 4,096 0.10 485 1.02 1,002 1 0.00
D 8,192 0.20 970 1.00 987 1 0.00
D 12,288 0.30 1,454 1.00 987 1 0.00
D 16,384 0.40 1,939 1.00 987 1 0.00
D 20,480 0.50 2,424 1.00 987 1 0.00
D 24,576 0.60 2,909 1.00 987 1 0.00
D 28,672 0.70 3,394 1.00 987 1 0.00
D 32,768 0.80 3,878 1.00 987 1 0.00
D 36,864 0.90 4,363 1.00 987 1 0.00
D 40,960 1.00 4,848 1.00 987 1 0.00
D 45,056 1.10 5,333 1.00 987 1 0.00
D 49,152 1.20 5,818 1.00 987 1 0.00
D 53,248 1.30 6,302 1.00 987 1 0.00
D 57,344 1.40 6,787 1.00 987 1 0.00
D 61,440 1.50 7,272 1.00 987 1 0.00
D 65,536 1.60 7,757 1.00 987 1 0.00
D 69,632 1.70 8,242 1.00 987 1 0.00
D 73,728 1.80 8,726 1.00 987 1 0.00
D 77,824 1.90 9,211 1.00 987 1 0.00
D 81,920 2.00 9,696 1.00 987 1 0.00
My shared pool size is 4gb and db_cache_size is 40Gb.
Please help me in configuring the correct size for this.
Thanks and Regards,Hi ,
Actually batch load is taking too much time.
Please find below the 1 hr awr report
Snap Id Snap Time Sessions Cursors/Session
Begin Snap: 6557 27-Nov-11 16:00:06 126 1.3
End Snap: 6558 27-Nov-11 17:00:17 130 1.6
Elapsed: 60.17 (mins)
DB Time: 34.00 (mins)
Report Summary
Cache Sizes
Begin End
Buffer Cache: 40,960M 40,960M Std Block Size: 8K
Shared Pool Size: 4,096M 4,096M Log Buffer: 25,908K
Load Profile
Per Second Per Transaction Per Exec Per Call
DB Time(s): 0.6 1.4 0.00 0.07
DB CPU(s): 0.5 1.2 0.00 0.06
Redo size: 281,296.9 698,483.4
Logical reads: 20,545.6 51,016.4
Block changes: 1,879.5 4,667.0
Physical reads: 123.7 307.2
Physical writes: 66.4 164.8
User calls: 8.2 20.4
Parses: 309.4 768.4
Hard parses: 8.5 21.2
W/A MB processed: 1.7 4.3
Logons: 0.7 1.6
Executes: 1,235.9 3,068.7
Rollbacks: 0.0 0.0
Transactions: 0.4
Instance Efficiency Percentages (Target 100%)
Buffer Nowait %: 100.00 Redo NoWait %: 100.00
Buffer Hit %: 99.66 In-memory Sort %: 100.00
Library Hit %: 99.19 Soft Parse %: 97.25
Execute to Parse %: 74.96 Latch Hit %: 99.97
Parse CPU to Parse Elapsd %: 92.41 % Non-Parse CPU: 98.65
Shared Pool Statistics
Begin End
Memory Usage %: 80.33 82.01
% SQL with executions>1: 90.90 86.48
% Memory for SQL w/exec>1: 90.10 86.89
Top 5 Timed Foreground Events
Event Waits Time(s) Avg wait (ms) % DB time Wait Class
DB CPU 1,789 87.72
db file sequential read 27,531 50 2 2.45 User I/O
db file scattered read 26,322 30 1 1.47 User I/O
row cache lock 1,798 20 11 0.96 Concurrency
OJVM: Generic 36 15 421 0.74 Other
Host CPU (CPUs: 24 Cores: 12 Sockets: )
Load Average Begin Load Average End %User %System %WIO %Idle
0.58 1.50 2.8 0.7 0.1 96.6
Instance CPU
%Total CPU %Busy CPU %DB time waiting for CPU (Resource Manager)
2.2 63.6 0.0
Memory Statistics
Begin End
Host Mem (MB): 131,072.0 131,072.0
SGA use (MB): 50,971.4 50,971.4
PGA use (MB): 545.5 1,066.3
% Host Mem used for SGA+PGA: 39.30 39.70
RAC Statistics
Begin End
Number of Instances: 2 2
Global Cache Load Profile
Per Second Per Transaction
Global Cache blocks received: 3.09 7.68
Global Cache blocks served: 1.86 4.62
GCS/GES messages received: 78.64 195.27
GCS/GES messages sent: 53.82 133.65
DBWR Fusion writes: 0.52 1.30
Estd Interconnect traffic (KB) 65.50
Global Cache Efficiency Percentages (Target local+remote 100%)
Buffer access - local cache %: 99.65
Buffer access - remote cache %: 0.02
Buffer access - disk %: 0.34
Global Cache and Enqueue Services - Workload Characteristics
Avg global enqueue get time (ms): 0.0
Avg global cache cr block receive time (ms): 1.7
Avg global cache current block receive time (ms): 1.0
Avg global cache cr block build time (ms): 0.0
Avg global cache cr block send time (ms): 0.0
Global cache log flushes for cr blocks served %: 1.4
Avg global cache cr block flush time (ms): 0.9
Avg global cache current block pin time (ms): 0.0
Avg global cache current block send time (ms): 0.0
Global cache log flushes for current blocks served %: 0.1
Avg global cache current block flush time (ms): 0.0
Global Cache and Enqueue Services - Messaging Statistics
Avg message sent queue time (ms): 0.0
Avg message sent queue time on ksxp (ms): 0.4
Avg message received queue time (ms): 0.5
Avg GCS message process time (ms): 0.0
Avg GES message process time (ms): 0.0
% of direct sent messages: 79.13
% of indirect sent messages: 17.10
% of flow controlled messages: 3.77
Cluster Interconnect
Begin End
Interface IP Address Pub Source IP Pub Src
en9 10.51.10.61 N Oracle Cluster Repository
Main Report
* Report Summary
* Wait Events Statistics
* SQL Statistics
* Instance Activity Statistics
* IO Stats
* Buffer Pool Statistics
* Advisory Statistics
* Wait Statistics
* Undo Statistics
* Latch Statistics
* Segment Statistics
* Dictionary Cache Statistics
* Library Cache Statistics
* Memory Statistics
* Streams Statistics
* Resource Limit Statistics
* Shared Server Statistics
* init.ora Parameters
More RAC Statistics
* RAC Report Summary
* Global Messaging Statistics
* Global CR Served Stats
* Global CURRENT Served Stats
* Global Cache Transfer Stats
* Interconnect Stats
* Dynamic Remastering Statistics
Back to Top
Statistic Name Time (s) % of DB Time
sql execute elapsed time 1,925.20 94.38
DB CPU 1,789.38 87.72
connection management call elapsed time 99.65 4.89
PL/SQL execution elapsed time 89.81 4.40
parse time elapsed 46.32 2.27
hard parse elapsed time 25.01 1.23
Java execution elapsed time 21.24 1.04
PL/SQL compilation elapsed time 11.92 0.58
failed parse elapsed time 9.37 0.46
hard parse (sharing criteria) elapsed time 8.71 0.43
sequence load elapsed time 0.06 0.00
repeated bind elapsed time 0.02 0.00
hard parse (bind mismatch) elapsed time 0.01 0.00
DB time 2,039.77
background elapsed time 122.00
background cpu time 113.42
Statistic Value End Value
NUM_LCPUS 0
NUM_VCPUS 0
AVG_BUSY_TIME 12,339
AVG_IDLE_TIME 348,838
AVG_IOWAIT_TIME 221
AVG_SYS_TIME 2,274
AVG_USER_TIME 9,944
BUSY_TIME 299,090
IDLE_TIME 8,375,051
IOWAIT_TIME 6,820
SYS_TIME 57,512
USER_TIME 241,578
LOAD 1 2
OS_CPU_WAIT_TIME 312,200
PHYSICAL_MEMORY_BYTES 137,438,953,472
NUM_CPUS 24
NUM_CPU_CORES 12
GLOBAL_RECEIVE_SIZE_MAX 1,310,720
GLOBAL_SEND_SIZE_MAX 1,310,720
TCP_RECEIVE_SIZE_DEFAULT 16,384
TCP_RECEIVE_SIZE_MAX 9,223,372,036,854,775,807
TCP_RECEIVE_SIZE_MIN 4,096
TCP_SEND_SIZE_DEFAULT 16,384
TCP_SEND_SIZE_MAX 9,223,372,036,854,775,807
TCP_SEND_SIZE_MIN 4,096
Back to Wait Events Statistics
Back to Top
Operating System Statistics - Detail
Snap Time Load %busy %user %sys %idle %iowait
27-Nov 16:00:06 0.58
27-Nov 17:00:17 1.50 3.45 2.79 0.66 96.55 0.08
Back to Wait Events Statistics
Back to Top
Foreground Wait Class
* s - second, ms - millisecond - 1000th of a second
* ordered by wait time desc, waits desc
* %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
* Captured Time accounts for 95.7% of Total DB time 2,039.77 (s)
* Total FG Wait Time: 163.14 (s) DB CPU time: 1,789.38 (s)
Wait Class Waits %Time -outs Total Wait Time (s) Avg wait (ms) %DB time
DB CPU 1,789 87.72
User I/O 61,229 0 92 1 4.49
Other 102,743 40 31 0 1.50
Concurrency 3,169 10 24 7 1.16
Cluster 58,920 0 11 0 0.52
System I/O 45,407 0 6 0 0.29
Configuration 107 7 1 5 0.03
Commit 383 0 0 1 0.01
Network 15,275 0 0 0 0.00
Application 52 8 0 0 0.00
Back to Wait Events Statistics
Back to Top
Foreground Wait Events
* s - second, ms - millisecond - 1000th of a second
* Only events with Total Wait Time (s) >= .001 are shown
* ordered by wait time desc, waits desc (idle events last)
* %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
Event Waits %Time -outs Total Wait Time (s) Avg wait (ms) Waits /txn % DB time
db file sequential read 27,531 0 50 2 18.93 2.45
db file scattered read 26,322 0 30 1 18.10 1.47
row cache lock 1,798 0 20 11 1.24 0.96
OJVM: Generic 36 42 15 421 0.02 0.74
db file parallel read 394 0 7 19 0.27 0.36
control file sequential read 22,248 0 6 0 15.30 0.28
reliable message 4,439 0 4 1 3.05 0.18
gc current grant busy 7,597 0 3 0 5.22 0.16
PX Deq: Slave Session Stats 2,661 0 3 1 1.83 0.16
DFS lock handle 3,208 0 3 1 2.21 0.16
direct path write temp 4,842 0 3 1 3.33 0.15
library cache load lock 39 0 3 72 0.03 0.14
gc cr multi block request 37,008 0 3 0 25.45 0.14
IPC send completion sync 5,451 0 2 0 3.75 0.10
gc cr block 2-way 4,669 0 2 0 3.21 0.09
enq: PS - contention 3,183 33 1 0 2.19 0.06
gc cr grant 2-way 5,151 0 1 0 3.54 0.06
direct path read temp 1,722 0 1 1 1.18 0.05
gc current block 2-way 1,807 0 1 0 1.24 0.03
os thread startup 6 0 1 108 0.00 0.03
name-service call wait 12 0 1 47 0.01 0.03
PX Deq: Signal ACK RSG 2,046 50 0 0 1.41 0.02
log file switch completion 3 0 0 149 0.00 0.02
rdbms ipc reply 3,610 0 0 0 2.48 0.02
gc current grant 2-way 1,432 0 0 0 0.98 0.02
library cache pin 903 32 0 0 0.62 0.02
PX Deq: reap credit 35,815 100 0 0 24.63 0.01
log file sync 383 0 0 1 0.26 0.01
Disk file operations I/O 405 0 0 0 0.28 0.01
library cache lock 418 3 0 0 0.29 0.01
kfk: async disk IO 23,159 0 0 0 15.93 0.01
gc current block busy 4 0 0 35 0.00 0.01
gc current multi block request 1,206 0 0 0 0.83 0.01
ges message buffer allocation 38,526 0 0 0 26.50 0.00
enq: FB - contention 131 0 0 0 0.09 0.00
undo segment extension 8 100 0 6 0.01 0.00
CSS initialization 8 0 0 6 0.01 0.00
SQL*Net message to client 14,600 0 0 0 10.04 0.00
enq: HW - contention 96 0 0 0 0.07 0.00
CSS operation: action 8 0 0 4 0.01 0.00
gc cr block busy 33 0 0 1 0.02 0.00
latch free 30 0 0 1 0.02 0.00
enq: TM - contention 49 6 0 0 0.03 0.00
enq: JQ - contention 19 100 0 1 0.01 0.00
SQL*Net more data to client 666 0 0 0 0.46 0.00
asynch descriptor resize 3,179 100 0 0 2.19 0.00
latch: shared pool 3 0 0 3 0.00 0.00
CSS operation: query 24 0 0 0 0.02 0.00
PX Deq: Signal ACK EXT 72 0 0 0 0.05 0.00
KJC: Wait for msg sends to complete 269 0 0 0 0.19 0.00
latch: object queue header operation 4 0 0 1 0.00 0.00
gc cr block congested 5 0 0 0 0.00 0.00
utl_file I/O 11 0 0 0 0.01 0.00
enq: TO - contention 3 33 0 0 0.00 0.00
SQL*Net message from client 14,600 0 219,478 15033 10.04
jobq slave wait 7,726 100 3,856 499 5.31
PX Deq: Execution Msg 10,556 19 50 5 7.26
PX Deq: Execute Reply 2,946 31 27 9 2.03
PX Deq: Parse Reply 3,157 35 3 1 2.17
PX Deq: Join ACK 2,976 28 2 1 2.05
PX Deq Credit: send blkd 7 14 0 4 0.00
Back to Wait Events Statistics
Back to Top
Background Wait Events
* ordered by wait time desc, waits desc (idle events last)
* Only events with Total Wait Time (s) >= .001 are shown
* %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
Event Waits %Time -outs Total Wait Time (s) Avg wait (ms) Waits /txn % bg time
os thread startup 140 0 13 90 0.10 10.35
db file parallel write 8,233 0 6 1 5.66 5.08
log file parallel write 3,906 0 6 1 2.69 4.62
log file sequential read 350 0 5 16 0.24 4.49
control file sequential read 13,737 0 5 0 9.45 3.72
DFS lock handle 2,990 27 2 1 2.06 1.43
db file sequential read 921 0 2 2 0.63 1.39
SQL*Net break/reset to client 18 0 1 81 0.01 1.19
control file parallel write 2,455 0 1 1 1.69 1.12
ges lms sync during dynamic remastering and reconfig 24 100 1 50 0.02 0.98
library cache load lock 35 0 1 24 0.02 0.68
ASM file metadata operation 3,483 0 1 0 2.40 0.65
enq: CO - master slave det 1,203 100 1 0 0.83 0.46
kjbdrmcvtq lmon drm quiesce: ping completion 9 0 1 62 0.01 0.46
enq: WF - contention 11 0 0 35 0.01 0.31
CGS wait for IPC msg 32,702 100 0 0 22.49 0.19
gc object scan 28,788 100 0 0 19.80 0.15
row cache lock 535 0 0 0 0.37 0.14
library cache pin 370 55 0 0 0.25 0.12
ksxr poll remote instances 19,119 100 0 0 13.15 0.11
name-service call wait 6 0 0 19 0.00 0.10
gc current block 2-way 304 0 0 0 0.21 0.09
gc cr block 2-way 267 0 0 0 0.18 0.08
gc cr grant 2-way 355 0 0 0 0.24 0.08
ges LMON to get to FTDONE 3 100 0 24 0.00 0.06
enq: CF - contention 145 76 0 0 0.10 0.05
PX Deq: reap credit 8,842 100 0 0 6.08 0.05
reliable message 126 0 0 0 0.09 0.05
db file scattered read 19 0 0 3 0.01 0.05
library cache lock 162 1 0 0 0.11 0.04
latch: shared pool 2 0 0 27 0.00 0.04
Disk file operations I/O 504 0 0 0 0.35 0.04
gc current grant busy 148 0 0 0 0.10 0.04
gcs log flush sync 84 0 0 1 0.06 0.04
ges message buffer allocation 24,934 0 0 0 17.15 0.02
enq: CR - block range reuse ckpt 83 0 0 0 0.06 0.02
latch free 22 0 0 1 0.02 0.02
CSS operation: action 13 0 0 2 0.01 0.02
CSS initialization 4 0 0 6 0.00 0.02
direct path read 1 0 0 21 0.00 0.02
rdbms ipc reply 153 0 0 0 0.11 0.01
db file parallel read 2 0 0 8 0.00 0.01
direct path write 5 0 0 3 0.00 0.01
gc current multi block request 49 0 0 0 0.03 0.01
gc current block busy 5 0 0 2 0.00 0.01
enq: PS - contention 24 50 0 0 0.02 0.01
gc cr multi block request 54 0 0 0 0.04 0.01
ges generic event 1 100 0 10 0.00 0.01
gc current grant 2-way 35 0 0 0 0.02 0.01
kfk: async disk IO 183 0 0 0 0.13 0.01
Log archive I/O 3 0 0 2 0.00 0.01
gc buffer busy acquire 2 0 0 3 0.00 0.00
LGWR wait for redo copy 123 0 0 0 0.08 0.00
IPC send completion sync 18 0 0 0 0.01 0.00
enq: TA - contention 11 0 0 0 0.01 0.00
read by other session 2 0 0 2 0.00 0.00
enq: TM - contention 9 89 0 0 0.01 0.00
latch: ges resource hash list 135 0 0 0 0.09 0.00
PX Deq: Slave Session Stats 12 0 0 0 0.01 0.00
KJC: Wait for msg sends to complete 89 0 0 0 0.06 0.00
enq: TD - KTF dump entries 8 0 0 0 0.01 0.00
enq: US - contention 7 0 0 0 0.00 0.00
CSS operation: query 12 0 0 0 0.01 0.00
enq: TK - Auto Task Serialization 6 100 0 0 0.00 0.00
PX Deq: Signal ACK RSG 24 50 0 0 0.02 0.00
log file single write 6 0 0 0 0.00 0.00
enq: WL - contention 2 100 0 1 0.00 0.00
ADR block file read 13 0 0 0 0.01 0.00
ADR block file write 5 0 0 0 0.00 0.00
latch: object queue header operation 1 0 0 1 0.00 0.00
gc cr block busy 1 0 0 1 0.00 0.00
rdbms ipc message 103,276 67 126,259 1223 71.03
PX Idle Wait 6,467 67 12,719 1967 4.45
wait for unread message on broadcast channel 7,240 100 7,221 997 4.98
gcs remote message 218,809 84 7,213 33 150.49
DIAG idle wait 203,228 95 7,185 35 139.77
shared server idle wait 121 100 3,630 30000 0.08
ASM background timer 3,343 0 3,611 1080 2.30
Space Manager: slave idle wait 723 100 3,610 4993 0.50
heartbeat monitor sleep 722 100 3,610 5000 0.50
ges remote message 73,089 52 3,609 49 50.27
dispatcher timer 66 88 3,608 54660 0.05
pmon timer 1,474 82 3,607 2447 1.01
PING 1,487 19 3,607 2426 1.02
Streams AQ: qmn slave idle wait 125 0 3,594 28754 0.09
Streams AQ: qmn coordinator idle wait 250 50 3,594 14377 0.17
smon timer 18 50 3,505 194740 0.01
JOX Jit Process Sleep 73 100 976 13370 0.05
class slave wait 56 0 605 10806 0.04
KSV master wait 2,215 98 1 0 1.52
SQL*Net message from client 109 0 0 2 0.07
PX Deq: Parse Reply 27 44 0 1 0.02
PX Deq: Join ACK 30 40 0 1 0.02
PX Deq: Execute Reply 20 30 0 0 0.01
Streams AQ: RAC qmn coordinator idle wait 259 100 0 0 0.18
Back to Wait Events Statistics
Back to Top
Wait Event Histogram
* Units for Total Waits column: K is 1000, M is 1000000, G is 1000000000
* % of Waits: value of .0 indicates value was <.05%; value of null is truly 0
* % of Waits: column heading of <=1s is truly <1024ms, >1s is truly >=1024ms
* Ordered by Event (idle events last)
% of Waits
Event Total Waits <1ms <2ms <4ms <8ms <16ms <32ms <=1s >1s
ADR block file read 13 100.0
ADR block file write 5 100.0
ADR file lock 6 100.0
ARCH wait for archivelog lock 3 100.0
ASM file metadata operation 3483 99.6 .1 .1 .2
CGS wait for IPC msg 32.7K 100.0
CSS initialization 12 50.0 50.0
CSS operation: action 21 28.6 9.5 61.9
CSS operation: query 36 86.1 5.6 8.3
DFS lock handle 6198 98.6 1.2 .1 .1
Disk file operations I/O 909 95.7 3.6 .7
IPC send completion sync 5469 99.9 .1 .0 .0
KJC: Wait for msg sends to complete 313 100.0
LGWR wait for redo copy 122 100.0
Log archive I/O 3 66.7 33.3
OJVM: Generic 36 55.6 44.4
PX Deq: Signal ACK EXT 72 98.6 1.4
PX Deq: Signal ACK RSG 2070 99.7 .0 .1 .0 .1
PX Deq: Slave Session Stats 2673 99.7 .2 .1 .0
PX Deq: reap credit 44.7K 100.0
SQL*Net break/reset to client 20 95.0 5.0
SQL*Net message to client 14.7K 100.0
SQL*Net more data from client 32 100.0
SQL*Net more data to client 689 100.0
asynch descriptor resize 3387 100.0
buffer busy waits 2 100.0
control file parallel write 2455 96.6 2.2 .6 .6 .1
control file sequential read 36K 99.4 .3 .1 .1 .1 .1 .0
db file parallel read 397 8.8 .8 5.5 12.6 17.4 46.3 8.6
db file parallel write 8233 85.4 10.3 2.3 1.4 .4 .1
db file scattered read 26.3K 79.2 1.5 8.2 10.5 .6 .1 .0
db file sequential read 28.4K 60.2 3.3 18.0 18.1 .3 .1 .0
db file single write 2 100.0
direct path read 2 50.0 50.0
direct path read temp 1722 95.8 2.8 .1 .5 .8 .1
direct path write 6 83.3 16.7
direct path write temp 4842 96.3 2.7 .5 .2 .0 .0 .2
enq: AF - task serialization 1 100.0
enq: CF - contention 145 99.3 .7
enq: CO - master slave det 1203 98.9 .8 .2
enq: CR - block range reuse ckpt 83 100.0
enq: DR - contention 2 100.0
enq: FB - contention 131 100.0
enq: HW - contention 97 100.0
enq: JQ - contention 19 89.5 10.5
enq: JS - job run lock - synchronize 3 100.0
enq: MD - contention 1 100.0
enq: MW - contention 2 100.0
enq: PS - contention 3207 99.5 .4 .1
enq: TA - contention 11 100.0
enq: TD - KTF dump entries 8 100.0
enq: TK - Auto Task Serialization 6 100.0
enq: TM - contention 58 100.0
enq: TO - contention 3 100.0
enq: TQ - DDL contention 1 100.0
enq: TS - contention 1 100.0
enq: UL - contention 1 100.0
enq: US - contention 7 100.0
enq: WF - contention 11 81.8 18.2
enq: WL - contention 2 50.0 50.0
gc buffer busy acquire 2 50.0 50.0
gc cr block 2-way 4934 99.9 .1 .0 .0
gc cr block busy 35 68.6 31.4
gc cr block congested 6 100.0
gc cr disk read 2 100.0
gc cr grant 2-way 4824 100.0 .0
gc cr grant congested 2 100.0
gc cr multi block request 37.1K 99.8 .2 .0 .0 .0 .0 .0
gc current block 2-way 2134 99.9 .0 .0
gc current block busy 7 14.3 14.3 14.3 28.6 28.6
gc current block congested 2 100.0
gc current grant 2-way 1337 99.9 .1
gc current grant busy 7123 99.2 .2 .2 .0 .0 .3 .1
gc current grant congested 2 100.0
gc current multi block request 1260 99.8 .2
gc object scan 28.8K 100.0
gcs log flush sync 65 95.4 3.1 1.5
ges LMON to get to FTDONE 3 100.0
ges generic event 1 100.0
ges inquiry response 2 100.0
ges lms sync during dynamic remastering and reconfig 24 16.7 29.2 54.2
ges message buffer allocation 63.1K 100.0
kfk: async disk IO 23.3K 100.0 .0 .0
kjbdrmcvtq lmon drm quiesce: ping completion 9 11.1 88.9
ksxr poll remote instances 19.1K 100.0
latch free 52 59.6 40.4
latch: call allocation 2 100.0
latch: gc element 1 100.0
latch: gcs resource hash 1 100.0
latch: ges resource hash list 135 100.0
latch: object queue header operation 5 40.0 40.0 20.0
latch: shared pool 5 40.0 20.0 20.0 20.0
library cache load lock 74 9.5 5.4 8.1 17.6 10.8 13.5 35.1
library cache lock 493 99.2 .4 .4
library cache pin 1186 98.4 .3 1.2 .1
library cache: mutex X 6 100.0
log file parallel write 3897 72.9 1.5 17.1 7.5 .6 .3 .1
log file sequential read 350 4.6 3.1 59.4 30.0 2.9
log file single write 6 100.0
log file switch completion 3 33.3 66.7
log file sync 385 90.4 3.6 4.7 .8 .5
name-service call wait 18 5.6 5.6 5.6 16.7 44.4 22.2
os thread startup 146 100.0
rdbms ipc reply 3763 99.7 .3
read by other session 2 50.0 50.0
reliable message 4565 99.7 .2 .0 .0 .1
row cache lock 2334 99.3 .2 .1 .1 .3
undo segment extension 8 50.0 37.5 12.5
utl_file I/O 11 100.0
ASM background timer 3343 57.0 .3 .1 .1 .1 21.1 21.4
DIAG idle wait 203.2K 3.4 .2 .4 18.0 41.4 14.8 21.8
JOX Jit Process Sleep 73 2.7 97.3
KSV master wait 2213 99.4 .1 .2 .3
PING 1487 81.0 19.0
PX Deq Credit: send blkd 7 57.1 14.3 14.3 14.3
PX Deq: Execute Reply 2966 59.8 .8 9.5 5.6 10.2 2.6 11.4
PX Deq: Execution Msg 10.6K 72.4 12.1 2.6 2.5 .1 5.6 4.6 .0
PX Deq: Join ACK 3006 77.9 22.1 .1
PX Deq: Parse Reply 3184 67.1 31.1 1.6 .2
PX Idle Wait 6466 .2 8.7 4.3 4.8 .3 .1 5.0 76.6
SQL*Net message from client 14.7K 72.4 2.8 .8 .5 .9 .4 2.8 19.3
Space Manager: slave idle wait 722 100.0
Streams AQ: RAC qmn coordinator idle wait 259 100.0
Streams AQ: qmn coordinator idle wait 250 50.0 50.0
Streams AQ: qmn slave idle wait 125 100.0
class slave wait 55 67.3 7.3 1.8 5.5 1.8 7.3 9.1
dispatcher timer 66 6.1 93.9
gcs remote message 218.6K 7.7 1.8 1.2 1.6 1.7 15.7 70.3
ges remote message 72.9K 29.7 5.1 2.7 2.2 1.5 4.0 54.7
heartbeat monitor sleep 722 100.0
jobq slave wait 7725 .1 .0 99.9
pmon timer 1474 18.4 81.6
rdbms ipc message 103.3K 20.7 2.7 1.5 1.3 .9 .7 40.7 31.6
shared server idle wait 121 100.0
smon timer 18 100.0
wait for unread message on broadcast channel 7238 .3 99.7
Back to Wait Events Statistics
Back to Top
Wait Event Histogram Detail (64 msec to 2 sec)
* Units for Total Waits column: K is 1000, M is 1000000, G is 1000000000
* Units for % of Total Waits: ms is milliseconds s is 1024 milliseconds (approximately 1 second)
* % of Total Waits: total waits for all wait classes, including Idle
* % of Total Waits: value of .0 indicates value was <.05%; value of null is truly 0
* Ordered by Event (only non-idle events are displayed)
% of Total Waits
Event Waits 64ms to 2s <32ms <64ms <1/8s <1/4s <1/2s <1s <2s >=2s
ASM file metadata operation 6 99.8 .1 .1
DFS lock handle 6 99.9 .1 .0
OJVM: Generic 16 55.6 2.8 41.7
PX Deq: Signal ACK RSG 3 99.9 .0 .1
PX Deq: Slave Session Stats 3 99.9 .0 .0 .0
SQL*Net break/reset to client 1 95.0 5.0
control file sequential read 1 100.0 .0
db file parallel read 34 91.4 8.6
db file scattered read 4 100.0 .0 .0
db file sequential read 6 100.0 .0 .0 .0
direct path write temp 11 99.8 .1 .1 .0
enq: WF - contention 2 81.8 18.2
gc cr block 2-way 1 100.0 .0
gc cr multi block request 1 100.0 .0
gc current block 2-way 1 100.0 .0
gc current block busy 2 71.4 28.6
gc current grant busy 8 99.9 .0 .1
ges lms sync during dynamic remastering and reconfig 13 45.8 20.8 33.3
kjbdrmcvtq lmon drm quiesce: ping completion 8 11.1 11.1 77.8
latch: shared pool 1 80.0 20.0
library cache load lock 26 64.9 14.9 12.2 4.1 4.1
log file parallel write 2 99.9 .0 .0
log file sequential read 10 97.1 2.0 .6 .3
log file switch completion 2 33.3 66.7
name-service call wait 4 77.8 22.2
os thread startup 146 100.0
reliable message 4 99.9 .0 .1
row cache lock 2 99.7 .0 .0 .3
Back to Wait Events Statistics
Back to Top
Wait Event Histogram Detail (4 sec to 2 min)
* Units for Total Waits column: K is 1000, M is 1000000, G is 1000000000
* Units for % of Total Waits: s is 1024 milliseconds (approximately 1 second) m is 64*1024 milliseconds (approximately 67 seconds or 1.1 minutes)
* % of Total Waits: total waits for all wait classes, including Idle
* % of Total Waits: value of .0 indicates value was <.05%; value of null is truly 0
* Ordered by Event (only non-idle events are displayed)
% of Total Waits
Event Waits 4s to 2m <2s <4s <8s <16s <32s < 1m < 2m >=2m
row cache lock 6 99.7 .3
Back to Wait Events Statistics
Back to Top
Wait Event Histogram Detail (4 min to 1 hr)
No data exists for this section of the report.
Back to Wait Events Statistics
Back to Top
Service Statistics
* ordered by DB Time
Service Name DB Time (s) DB CPU (s) Physical Reads (K) Logical Reads (K)
ubshost 1,934 1,744 445 73,633
SYS$USERS 105 45 1 404
SYS$BACKGROUND 0 0 1 128
ubshostXDB 0 0 0 0
Back to Wait Events Statistics
Back to Top
Service Wait Class Stats
* Wait Class info for services in the Service Statistics section.
* Total Waits and Time Waited displayed for the following wait classes: User I/O, Concurrency, Administrative, Network
* Time Waited (Wt Time) in seconds
Service Name User I/O Total Wts User I/O Wt Time Concurcy Total Wts Concurcy Wt Time Admin Total Wts Admin Wt Time Network Total Wts Network Wt Time
ubshost 60232 90 2644 4 0 0 13302 0
SYS$USERS 997 2 525 19 0 0 1973 0
SYS$BACKGROUND 1456 2 1258 14 0 0 0 0
I am not able to paste the whole awr report. I have paste some of the sections of awr report.
Please help.
Thanks and Regards, -
message loop filling system log.
Text: discoveryd Basic Sockets Couldn't set IP_BOUND_IF on socket fd[72] scopeID[4] errno[22] result[-1]
Value of fd[] does cycle
Loop prevents access to internet
Tried work-around from http://apple.stackexchange.com/questions/153080/computer-name-keeps-changing-osx -10-10-14a389
Basely has an affect.
Power-off of router stops the loop.
Powered-off for 5 (five) minutes and can access internet
Macbook Air (MBA) and iMac both experience the loopPlease read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
ABAP SET LOCAL LANGUAGE doesn't work
Hello Community,
actually i try to work in a ABAP report with the SET LOCAL LANGUAGE
statement to change the text environment on the fly to an other
language. In the debugger i can see that the SY-LANGU is changed to the
correct country but the messages are in the wrong language...
i also set the profile parameter install/collate/active = 1
I created a small testprogramm:
REPORT Z_STEFAN_TEST_002 MESSAGE-ID sabapdocu.
SET COUNTRY 'US'.
SET LANGUAGE 'EN'.
SET LOCALE LANGUAGE 'E'.
MESSAGE i014.
When i logon with language DE and start the programm, the messages are
also in DE and not in EN.
So can you help me to find a solution?
best regards,
StefanHi Stefan,
with set locale/language you can set only language environment for text-elements, headers etc...
I don't know about similar simple solution for messages, but you can load message directly from database table ...
DATA: l_text TYPE natxt.
SELECT SINGLE text FROM t100
INTO l_text
WHERE sprsl = 'E' AND
arbgb = 'SABAPDOCU' AND
msgnr = '014'.
MESSAGE l_text TYPE 'I'.
Regards
Matus -
Does anybody got a Windows 8 set up correctly on a Touchsmart PC ??
After trying three days setting up Windows 8 on my Touchsmart 600-1040es PC I can officially anounce ... it does not work (at least not for me) !!!
Is there anybody out there who got W8 to work on a touchsmart PC ??
Which model and how did you do it .... I am very curious !!
Thanks for your feedback (since HP does not seem to care a lot)@ remstoffer
> Re: Does anybody got a Windows 8 set up correctly on a Touchsmart PC ??
Yes. I have been using my tx2 since the DP. Currently still on the RP. The only problem I had was a delay after the CP waiting for N-trig to get an update available for the DuoSense driver for Multi-Touch. (IIRC the generic driver that MS provided supported single touch only but at least tap worked. When I installed the then latest N-trig driver Multi-Touch worked but tap didn't.) Now there is a message about having to do the firmware update under W7 but that's no problem for me since I am dual-booting. Anyway, now I would complain more about pen support than touch but I think that that might have more to do with my hardware than with the level of pen support left in the OS. Even in W7 I wasn't really happy with the pen support.
What are your symptoms? Can you use it just as a normal Desktop without Touch?
What's a TouchSmart 600? Specifically how is Touch supported on it?... Oh. "NextWindow 1950"? Looks like it's pretty old (for W7 X64) and it isn't even listed by "Earlier Touch Screen Products". Perhaps you could try installing the W7 driver in compatibility mode? (I'm not going to insert a link to the driver I found--2009-11-05--in case I have guessed incorrectly about what you have. <w>)
Good luck
Robert Aldwinckle -
How to set local currency in AR/Invoice through DI API SAP B1?
Dear Expert,
I am using DI API to add AR/Invoice document, but I can't find how to set local currency for BP with foreign currency.
This my code snip :
oSO = oCompany.GetBusinessObject(BoObjectTypes.oInvoices)
oSO.DocDate = dtpPostDate.Value
oSO.DocDueDate = dtpDueDate.Value
oSO.TaxDate = dtpDocDate.Value
oSO.Series = cSeries
oSO.DocNum = txtNumber.Text
oSO.DocCurrency = doccur
oSO.CardCode = txtBP.Text
oSO.CardName = txtName.Text
oSO.ContactPersonCode = cntctCode
oSO.JournalMemo = txtRemarks.Text
For i = 0 To dgv.RowCount - 2
oSO.Lines.SetCurrentLine(i)
oSO.Lines.ItemCode = dgv.Item(0, i).Value
oSO.Lines.ItemDescription = dgv.Item(2, i).Value
oSO.Lines.Quantity = dgv.Item(4, i).Value
oSO.Lines.Price = dgv.Item(5, i).Value
oSO.Lines.DiscountPercent = dgv.Item(6, i).Value
oSO.Lines.TaxCode = dgv.Item(7, i).Value
oSO.Lines.LineTotal = dgv.Item(9, i).Value
oSO.Lines.Currency = doccur
oSO.Lines.Add()
Next
lRetCode = oSO.Add()
If lRetCode <> 0 Then
oCompany.GetLastError(lErrCode, sErrMsg)
MsgBox(sErrMsg, 16, "Attention")
Else
MsgBox("Operation completed successfully.", 64, "Information")
End If
When trying to Add, system show error message " Enter valid currency code [OINV.DocCur][Line:1], '$' "
I am not lucky after trying for a day , wish enlightenment from the experts here, Thank you.
My machine : SAP B1 9 PL 4
Best Regards,
Muh.UlfahHi
In the other thread I suggested that you can add document using interface first because there is a possibility that B1 doesn't accept this currency code not because you set it improperly in your code but because of some other reason, for example this currency is not valid for this particular business partner. Despite the fact that this way you can eliminate other possible problems you can also use DI to save an existing document as XML and check what is the actual currency code that B1 itself placed in the document lines object.
Afterwards you can again try to add document using DI.
btw
check this thread:
How to set local currency in sales order for BP with foreign currency through DI?
Kind regards,
Radek
Maybe you are looking for
-
ABAP Dump After EHP4 Upgrade "SYNTAX_ERROR"
Hello I performed ERP ECC 6.0 to EHP4 upgrade. System is working fine, Support Package stacks at maximum level, kernel, tp and R3trans is up-to-date. Only problem is I am getting "SYNTAX_ERROR" every minute. What could be the reason? Runtime Errors
-
Need help on -- Size of object
how do i get the size of the object ? Thanks in Advance
-
HT4759 My Apple ID is not valid for iCloud?
My Apple ID works with iTunes, and the App Store. Why do I keep getting an error when I try to setup iCloud? I just installed Mountain Lion and changed my Apple ID to be the same as my email address. Any help would be great, thank you.
-
Motion Menus back ground and the overlay
People, I have a motion BG in a menu... it run smooth, the problem is that I set the overlay for the buttons but it show the selected state ( the overlay) before the video is done so the DVD viewer can see whats coming. I put the default button to "n
-
What is the "Host Directory"?