Couldn't show the details of the event because it was just deleted by another device / by another person
I use icloud on the web, and create events in my boss's calendar everyday.
Sometimes when I create an event it's fine, other times I get this error message after I create an event:
Couldn't show event:
Couldn't show the details of the event because it was just deleted by another device / by another person.
When I click "ok" the error message and the event then disappears from view on the calendar.
When I refresh the browser the event is visable, but when I try to open it the same error message appears.
What gives?
The event is still visable on the calendar on my iPhone, but i am not able to edit it when I open it on my iPhone.
If I try to delete the event on my iPhone so I can re-create it on the iCloud it doesn't delete properly.
Any advice?
I am frustrated because it's hit and miss. I am consistant in the way I create my events, so why do I get this error message half the time?
I am using iCloud on the web to create events in my shared calendar with my boss.
Half the time when I create events I am getting this same error message.
"Couldn't show the details of the event because it was just deleted by another device / by another person"
When I click "ok", the event then disappears from my view on the icloud calendar.
I don't understand what I am doing wrong.
Any advice?
Similar Messages
-
This randomly happens and i can not tell exactly what i do or why.
All i know is that every time you visit a page,site, picture etc... the back button remembers every page you have just been too in that session.
However some times the back button goes grey and i can not click on it and it loses all the previous pages i have been to.
I can reopen the last pages by going to my history but it's really annoying as it takes time and as i surf and look at a lot of things, the back button is crucial for me.I am experiencing the same problem with the back button randomly being greyed out and not functional. If I navigate to the same page a second time, the back button is usually functional again... have not been able to associate this behavior with any particular site
-
After install snow leopard, ical does not show the events of some calendars
After I install snow leopard, ical does not show all the events, or simple does not show the events of some calendars that I created.
Can somebody solve this problem? Is there some update for ical?Try the following:
1 - Go to your user account home folder, and open the library folder within it.
Look for the folder named "Calendars" and inside you might find a bunch of different folders with weird names. If they are there that means your calendars might not be lost.
2 - Look for the file "Calendar Cache". That file might be corrupted. Trash it. You may want to save a copy of it elsewhere. Once trashed, re-open ical. This should force it to rebuild its library based on those folders with weird names you saw. Your calendars should be back. Good luck -
The Event read query was not supported
I have an error during a Search request in my collab suite calendar.
Here the soap message :
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<SOAP-ENV:Header>
<auth:BasicAuth xmlns:auth="http://soap-authentication.org/2002/01/">
<Name>lde</Name>
<Password>xxxx</Password>
</auth:BasicAuth>
</SOAP-ENV:Header>
<SOAP-ENV:Body>
<cwsl:Search xmlns:cwsl="http://www.oracle.com/WebServices/Calendaring/1.0/">
<CmdId>test</CmdId>
<vQuery>
<From>VEVENT</From>
<Where>DTSTART >= '20061002T000000Z' AND DEND <= '20061002T235959Z'</Where>
<x-oracle-searchhandle></x-oracle-searchhandle>
<x-oracle-timestamp>20061002T113300Z</x-oracle-timestamp>
</vQuery>
</cwsl:Search>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
And the reply is :
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" soap:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<soap:Body>
<soap:Fault>
<faultcode>soap:Server.Error::Data::CalEvent</faultcode>
<faultstring>The Event read query was not supported</faultstring>
<detail>
<cwsl:Error xmlns:cwsl="http://www.oracle.com/WebServices/Calendaring/1.0/">
<Class>Error::Data::CalEvent</Class>
<Code>000C-07-00-00000023</Code>
<Line>306</Line>
<FileName>UniapiQuery.cpp,v</FileName>
<Version>1.2</Version>
<LastMod>2005/04/26 16:47:36</LastMod>
<Author>kelsaid</Author>
<Date>Mon Oct 02 11:48:16 2006</Date>
<PID>30834</PID>
<TID>1124678576</TID>
</cwsl:Error>
</detail>
</soap:Fault>
</soap:Body>
</soap:Envelope>
I haven't any errors with this sample.
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<SOAP-ENV:Header>
<auth:BasicAuth xmlns:auth="http://soap-authentication.org/2002/01/">
<Name>lde</Name>
<Password>xxxxx</Password>
</auth:BasicAuth>
</SOAP-ENV:Header>
<SOAP-ENV:Body>
<cwsl:Search xmlns:cwsl="http://www.oracle.com/WebServices/Calendaring/1.0/">
<CmdId>test</CmdId>
<vQuery>
<From>VEVENT</From>
</vQuery>
</cwsl:Search>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
Message was edited by:
Ludovic DESSEMONI resolved my problem. It was a syntax error :
<Where>DTSTART >= '20061002T000000Z' AND DTEND <= '20061002T235959Z'</Where>
and not :
<Where>DTSTART >= '20061002T000000Z' AND DEND <= '20061002T235959Z'</Where> -
On OSX Lion i used to drag the window to the top of the screen and get it maximise, and drag the window right or left to show the both beside each other just like windows 7, How to do it on Mountain lion ?
That has never been a feature of Mac OS X, but I believe there was some kind of third-party software that could add that capability. i don't recall what its name is, but you must have had that installed, and it either isn't installed anymore (perhaps removed as incompatible?) or is not working properly in Mountain Lion.
-
HT4623 How do I get the calendar to show the whole month and not just the day or week.
How do I get the calendar on my updated i phone 7 to show the whole month and not just the week or the day?
Touch the arrow (or word) at upper left (e.g. September).
-
Has anyone encountered this message on their time capsule/machine? Time Machine couldn't complete the backup because the backup disk image"/Volumes/Patti's Time Capsule/Patti's MacBook Pro.sparsebundle" is already in use"?
If you reboot the computer it should fix the problem. Also see the first link under More Like This to the right of this page:
I am received an error on my Time Capsule which states the backup disk image "Volumes/Data/MacBook Pro. sparse bundle? is already in use. so time machine couldn't complete the backup to time capsule - any suggestion -
why my map dosent show the addresses completly? it just shows the name of city or in the best way the name of exxpressway and it wont work in reminder or any other place. this happend after i update my iphone 4 to ios 5.
I am having a really wierd issue as well that is probally related. I dont see 95% of the album artwork associated with my music. Also, it seems as if this has gotten worse since I started using that match feature
-
I am using TweetDeck for Desktop and just switched to a computer running Mountain Lion (10.8.5). I have the Notification Center configured to show Banner alerts when tweets from designated accounts are posted. Prior to running Mountain Lion, TweetDeck itself would show me a banner in the top right-hand corner of my screen, and that banner would include the full tweet.
Now that I'm on Mountain Lion, it appears that the Notification Center has taken over the alert system. However, unlike the native TweetDeck banner, the Mountain Lion notification banner is limited to two lines, which means that, unless it's a very short tweet, I can't see the full tweet that has been posted. This is VERY inconvenient, as it means that I need to either open TweetDeck or open the Notification Center in order to see the full tweet.
Is there any way to adjust the Notification Center banner to allow it to show the full tweet, instead of just the first two lines?You have 2 options:
1. Create Video Playlists in iTunes (for example create one for Home movies, the other for Movies)
You COULD make these Smart Playlists. (see below for one technique)
NOTE: If you wish to do this don't miss the preference in Settings to enable Video Playlists at least (at least in the latest ATV updates) I believe it's under Audio setting. Amazingly the default is NOT to show!! (had me going for quite a bit)
2. Set up your Home Movies as "Music Videos" This has some gotchas: like you'll probably want to choose the skip when shuffiling, also Now they'll appear in music lists. The only advantage to this is that it makes playlists more available on iOS devices since there are no Playlists displayed in the Videos App.... (yeah Apple's made this WAY confusing of late)
If you wish to keep these clearly defined (especially for use with Smart Playlists.
Select the movie
Get Info (Edit Menu) (or Command-I Mac, Control-I, PC)
Choose the "Video" Tab - you can select your desired type from the Media Kind pop up.
Alternate method for setting up smart playlist of home movies would be to set the Genre to "Home Movie"
Probably more than you needed to know - leigh -
Then when i try and connect it to the computer it shows the no battery screen with just the lightning bolt. and when i try to restore it the screen flashes then resest to the no battery screen and i get error 1602. Do you know what is wrong with it? do you think its just the battery cause i can replace that for cheap or do you think the circuts are fried?
No. It sounds like the water destroyed the component inside the iPod.
About your only choice now it to take it to Apple and pay for a replacement.
Allan -
I am working with a client who is attempting to backup to a NAS device
The device is a linksys NSS6000 (Cisco device).
It’s a dual 1Gbit LAN device that supports CIFS / FTP and NFS transfers. It has only 1Gbit lan connected.
The device has 4 * 500 gb sata drives in raid 1 attached.
Cables go from cat 5 to fiber back to cat5. (The NAS is located at a neighboring office) The switches are 1gbit.
Server is a win2k8r1 fully up to date.
When backing up to the NAS device, the following error occurs:
Running backup of volume Local Disk(D:), copied (86%).
Running backup of volume Local Disk(D:), copied (90%).
Running backup of volume Local Disk(D:), copied (94%).
Running backup of volume Local Disk(D:), copied (98%).
Backup of volume Local Disk(D:) completed successfully.
Backup stopped before completing.
Summary of backup:
Backup stopped before completing.
The process cannot access the file because it is being used by another process.
If we redirect the backup to a folder on a 2008 share, the backup completes successfully.
Only when backing up to the linksys NSS6000 does the error occur.
No other backup processes are writing to the NAS device so I can't understand why the process thinks the file is
being used by another process.
One thing we did notice that when the backup to the NAS device occurs, throughput is about 150 mbit average
On the 2008 server shares we successfully backup to, the through put is 500 mbit. Not sure if that is important, but
might be worth mentioning.
The following event log entry was noted at the end of the backup.
The description for Event ID '519' in Source 'Microsoft-Windows-Backup' cannot be found.
The local computer may not have the necessary registry information or message DLL files to display the message,
or you may not have permission to access them. The following information is part of the
event:'2009-05-12T10:13:31.617Z', '', '2147942432', '%%2147942432'
Any ideas?
Thanks..MichaelI am also seeing the same problem backing up nightly to a brand new NAS device (WD My Book Live)
All the error codes are the same as those in this thread.
From Windows Event Viewer:
The backup operation that started at '2011-03-25T06:00:19.811302700Z' has failed with following error code '2147942432' (The process cannot access the file because it is being used by another process.). Please review the event details
for a solution, and then rerun the backup operation once the issue is resolved.
Fault bucket 659897467, type 5
Event Name: WindowsBackupFailure
Response: Not available
Cab Id: 0
Problem signature:
P1: Backup
P2: 6.1.7600
P3: 0x80070020
P4: 7
P5:
P6:
P7:
P8:
P9:
P10:
Attached files:
C:\Windows\Logs\WindowsBackup\WindowsBackup.1.etl
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportArchive\NonCritical_Backup_6957d65de91fc4a853ecc7c78914bf7351fff0d1_14578325
Analysis symbol:
Rechecking for solution: 0
Report Id: dd480bf2-56a6-11e0-ae81-00217099bf56
Report Status: 0
From Report.wer in C:\ProgramData\Microsoft\Windows\WER\ReportArchive\NonCritical_Backup_6957d65de91fc4a853ecc7c78914bf7351fff0d1_14578325
Version=1
EventType=WindowsBackupFailure
EventTime=129455071508181139
Consent=1
UploadTime=129455071508201140
ReportIdentifier=dd480bf2-56a6-11e0-ae81-00217099bf56
Response.BucketId=659897467
Response.BucketTable=5
Response.type=4
Sig[0].Name=Operation
Sig[0].Value=Backup
Sig[1].Name=AppVer
Sig[1].Value=6.1.7600
Sig[2].Name=HRESULT
Sig[2].Value=0x80070020
Sig[3].Name=TargetType
Sig[3].Value=7
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=6.1.7600.2.0.0.256.48
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=1033
State[0].Key=Transport.DoneStage1
State[0].Value=1
State[1].Key=DataRequest
State[1].Value=Bucket=659897467/nBucketTable=5/nResponse=1/n
FriendlyEventName=WindowsBackupFailure
ConsentKey=WindowsBackupFailure
AppName=Windows host process (Rundll32)
AppPath=C:\Windows\System32\rundll32.exe
ReportDescription=Windows Backup failure -
I am trying to move a file from a folder to another folder.
here is my code:
//storage of the all files
string[] folderContentNames = Directory.GetFiles(@"C:\Users\Jonah\Desktop\Test Pictures");
private void historyPictureBox_Click(object sender, EventArgs e)
destinationFile = @"C:\Users\Jonah\Desktop\Test Test";
File.Move(folderContentNames[1], destinationFile);
updateListBoxFileName();
updateImageBox();
each time I hit the bolded underlined part I get that error message.
if you need anything else just ask.
Thanks in advance,
Thor OrbHi Thor,
If you want to move a file from a folder to another folder, I think you could get the sourcePath and TargetPath. The code below shows a simple demo:
string[] folders = Directory.GetFiles(@"D:\Test\VSC#\01\WindowsFormsApp\WindowsFormsApp\Test");
string desFile =Path.Combine( @"D:\Test\VSC#\01\WindowsFormsApp\WindowsFormsApp\Test - Copy\"+Path.GetFileName(folders[1]));
File.Move(folders[1], desFile);
In addition, the link below might be useful to you:
# How to: Copy, Delete, and Move Files and Folders (C# Programming Guide)
>> The process cannot access the file because it is being used by another process
The message seemed that the file was opened in other process. Did you operate the file with other code?
I think you could check if the files and the folders were opened, and review your codes if they were used in other places.
If you have any further questions, please feel free to post in this forum.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.
Ya, Thanks I figured about the path and destation. yes I am using the file in another area, the file is an image jpg and I am displaying it in a picture box. Now I have been doing a little research I see a command called Dispose() and this is suppose to
release the handle on the image, but I can seem to figure out have to use it correctly.
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Collections;
using System.Threading.Tasks;
using System.Windows.Forms;
using System.IO;
namespace Scanned_Picture_Ogranizer
public partial class Form1 : Form
//storage of the all files
string[] folderContentNames = Directory.GetFiles(@"C:\Users\Jonah\Desktop\Scan Project Testing\Test Pictures", "*.jpg");
//List<string> folderContentList = folderContentNames.ToList();
private List<string> folderContentList = new List<string>();
Bitmap currentImage;
Bitmap placeHolder;
public Form1()
InitializeComponent();
convertingArrayToList();
startUpData();
string sourceFile = @"C:\Users\Jonah\OneDrive\My Programming Projects\Scanned Picture Organizer Project\Test Pictures";
string destinationFile = "";
private void moveButton_Click(object sender, EventArgs e)
private void startUpData()
//placeHolder = new Bitmap(folderContentList[0]);
//currentImage = (Bitmap)placeHolder.Clone();
// Image loadImage = new Bitmap(pictureClones[0]);
// currentFilePictureBox.Image = loadImage;
int numberOfFilesLeft = folderContentNames.Length;
foreach (string name in folderContentNames)
fileNamesListBox.Items.Add(name);
fileNameTextBox.Text = folderContentNames[0];
numberOfFilesLeftTextBox.Text = numberOfFilesLeft.ToString();
///loadImage.Dispose();
//FileStream currentImage = new FileStream(folderContentList[0], FileMode.Open, FileAccess.Read, FileShare.ReadWrite);
private void convertingArrayToList()
foreach (string listName in folderContentNames)
folderContentList.Add(listName);
private void selectingImageFromListBox()
private void updateImageBox()
Bitmap currentImage = new Bitmap(folderContentList[0]);
currentFilePictureBox.Image = currentImage;
currentImage.Dispose();
private void updateListBoxFileName()
fileNamesListBox.Items.RemoveAt(0);
fileNameTextBox.Text = folderContentList[0];
// numberOfFilesLeftTextBox.Text = numberOfFilesLeft.ToString();
private void historyPictureBox_Click(object sender, EventArgs e)
destinationFile = @"C:\Users\Jonah\Desktop\Scan Project Testing\Test Test\";
File.Move(folderContentList[0], destinationFile + System.IO.Path.GetFileName(folderContentList[0]));
folderContentList.RemoveAt(0);
updateImageBox();
updateListBoxFileName();
when I first start the program the first picture displays, but when I trigger historyPictureBox_Click(), it does that error again. Another things is that I already looked at that link and it didn't help.
I just super confused, I would like your help on this.
Thanks,
Thor Orb -
The process cannot access the file because it is being used by another proc
We are exporting crystal reports into PDF using ExportToHttpResponse (code snippet below)
// Getting the type of the report file which has been selected by the user. (which will be REPORT CLASS type)
Type objType = Type.GetType("WebApplication1.Reports." + ReportName);
ReportClass SEPREport = (ReportClass)Activator.CreateInstance(objType);
// GetTypedDataSet()returns an instance of typed data set.
SEPREport.SetDataSource(GetTypedDataSet());
SEPREport.ExportToHttpResponse(ExportFormatType.PortableDocFormat, Response, true, ReportName );
Now we have created these REPORTS using Basic Crystal Report 10.5, which comes bundled with Visual Studio 2008 and .Net Framework 3.0.
Now on our machines, we have never experienced any issues.
BUT on the DEV server (web server) which has .net Framework 3.0 and in its GAC its has CRYSTAL DLLs version 11.5 (required to create an Object of ReportClass and its related functions) ; sometimes we get the following error while exporting crystal report to pdf:
The process cannot access the file because it is being used by another process. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Runtime.InteropServices.COMException: The process cannot access the file because it is being used by another process.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[COMException (0x80004005): The process cannot access the file because it is being used by another process.
CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext) +0
CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext) +525
CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext) +681
CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToStream(ExportOptions options) +105
CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToHttpResponse(ExportOptions options, HttpResponse response, Boolean asAttachment, String attachmentName) +163
CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToHttpResponse(ExportFormatType formatType, HttpResponse response, Boolean asAttachment, String attachmentName) +132
MSSB.FATools.UI.PlannerReport.CreatePDFDocument() +732
MSSB.FATools.UI.PlannerReport.btnCreatePDF_Click(Object sender, EventArgs e) +45
System.Web.UI.WebControls.Button.OnClick(EventArgs e) +104
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +107
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5615A bit of a confusion on my part;
Now we have created these REPORTS using Basic Crystal Report 10.5, which comes bundled with Visual Studio 2008 and .Net Framework 3.0. Now on our machines, we have never experienced any issues.
Going by the above, you should have references to CR assemblies of version 10.5.3700 only. No other references.
Now, looking at this paragraph:
BUT on the DEV server (web server) which has .net Framework 3.0 and in its GAC its has CRYSTAL DLLs version 11.5 (required to create an Object of ReportClass and its related functions) ; sometimes we get the following error while exporting crystal report to pdf:
I wonder what runtime was deployed to the server. E.g.; if you are using CR 10.5, your assemblies will be 10.5.3700 and you should be deploying the following runtime (depending on 32 bit / 64 bit, etc.):
CRRedist2008_ia64.msi
https://smpdl.sap-ag.de/~sapidp/012002523100006255262008E/CRRedist2008_ia64.zip
CRRedist2008_x64.msi
https://smpdl.sap-ag.de/~sapidp/012002523100006255272008E/CRRedist2008_x64.zip
CRRedist2008_x86.msi
https://smpdl.sap-ag.de/~sapidp/012002523100009351342008E/CRBasicVS2008_redist_x86.zip
One way to check on what is actually loading is to use the [Modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] utility.
- Ludek -
why is it ok for a verizon wireless service representative to lie to a customer? I went over my monthly data and i called to ask for some help with the overage because i was barely over. They told me they would take care of it and sold me on a shared data plan that would result in 2gb less data but told me i would save 20$ a month. I agreed and recieved my next statement and to my suprise my bill actually went up 15$ a month and i talked to several people and they all told me there is nothing that can be done to get back on the plan i was on and they can not even give me a discount to get me back to what i was paying. They can only offer me a convenience credit. I will be cancelling service.
ajwest101,
We do not want to see you go. I truly apologize for any misinformation regarding your plan. Let's investigate into this a little further. What plan were you on? What plan were you switched to? If you look at the detailed billing online of your previous bill do you see any additional charges other then the plan?
LindseyT_VZW
Follow us on Twitter @VZWSupport -
I updated my ipad but had to skip the update to the icloud because it was not finished within 2 hours. The ipad worked fine then, but I turned it off. When I tried to turn it on again, it kept asking for the password over and over. What do I do now?
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom
Maybe you are looking for
-
Trouble with connecting to projector....HELP!!!
I use ProPresenter for Worship/Media Presentations. My Mac normally connects automatically, UNTIL, I had to play a DVD in church and I went to System Preferences, Display, Arrangement, and clicked Mirror Images. Now, my Mac will not connect to the pr
-
Hi Gurus, Is there a way to achieve this specific scenario. Let us say we have five line items on the Pur req.We have setup our approval system in such a way that if the dollar amount is $1000 or more then only the release startegy kicks off. Below 1
-
Creating views on 9.2.0.7 and red hat: strange behavior
Hi all, here you can find two new problems to solve: create table test1(id1 number, text1 varchar2(4000)); create table test2(id2 number, text2 varchar2(4000)); create or replace view v_test1_test2 as select t1.* , t2.* from test1 t1 test2 t2 where t
-
How to register and publish the webservice in the registry
hai friends, 1) how to register and publish the webservice in the registry? I think To register the webservice first create an organization and publishes it to the registry then only register the webservice .Is it correct or not . If it is not correc
-
Appleworks Spreadsheet Saving Error
When using Appleworks 6 Spreadsheet, we tried to save the file as an Appleworks 5 Spreadsheet and received this message: "Off sheet references will not be saved". The formulas are not saved in the Appleworks 5 file. What are off sheet references?