Couldn't Update to Windows 10 Technical Preview 0x8007000E - 0x2000C

Hello,
I am upgrading my Windows 10 Technical Preview for Enterprise 9879 to the newer January build. Downloading and installation procedure finished successfully, however, after restarting the system, I've got the message stating:
Couldn't update to Windows 10 Technical PreviewSorry, we couldn't complete the update to Windows 10 Technical Preview. We've restored your previous version of Windows to this PC.0x8007000E - 0x2000C
What could be the issue?
See also
http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/install-error-0x8007000e-0x2000c/48fe4984-566b-4c91-88bd-8a23625318bb
https://social.technet.microsoft.com/Forums/windows/en-US/865a2d3d-6cc3-4079-b59e-a4f200fd193a/error-0x8007000e0x2000c-in-upgrade-from-7-pro-to-81-pro?forum=w8itproinstall
Well this is the world we live in And these are the hands we're given...

Hi Exotic Hadron,
The general information for this error:
Error: 0x8007000e Not enough storage is available to complete this operation.
Please first check if you have enough memory (more than 2G) and storeage space for C Drive.
if this issue persists, you can send your rollback logs to me, I would look into it to see if we can find something.
C:\$Windows.~BT\Sources\Rollback\setupact.log
You can send it to this email address:
[email protected]
Alex Zhao
TechNet Community Support

Similar Messages

Couldn't update to Windows 10 Technical Preview

Hello!
I have tried to update to build 10041 several times, but I get the message:
Sorry, we couldn't complete the update to Windows Technical Preview. We've restored your previous version of Windows to this PC.
0xC1900101 - 0x30018.
I tried to extend C free space and to delete C:/$Windows.BT.
Here is my setuperr file.
2015-04-15 14:33:56, Error                 DU     DU::CDUSession::Initialize: Failed to begin IUpgradeInternalSession. hr = 0x80004002[gle=0x000003f0]
2015-04-15 14:34:00, Error                        CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-04-15 14:34:55, Error                 DU     DU::CDUSession::Initialize: Failed to begin IUpgradeInternalSession. hr = 0x80004002[gle=0x000003f0]
2015-04-15 14:35:31, Error                 SP     pDUSearch: DUSearch failed. hr = 0x80070057
2015-04-15 14:35:31, Error                 SP     CDownloadDUUpdates::DoExecuteInternal: Failed to search for updates. hr = 0x80070057
2015-04-15 14:35:31, Error                 SP     CSetupPlatform::DownloadDynamicUpdates: Failed to download updates. Error: 0x80070057[gle=0x00000012]
2015-04-15 14:35:31, Error                 MOUPG DUImage: Failed to execute DUImage FOD search and download [0x80070057][gle=0x00000012]
2015-04-15 14:35:42, Error                 SP     pDUSearch: DUSearch failed. hr = 0x80070057
2015-04-15 14:37:24, Error                 SP     pDUSearch: DUSearch failed. hr = 0x80070057
2015-04-15 14:37:24, Error                 SP     CDownloadDUUpdates::DoExecuteInternal: Failed to search for updates. hr = 0x80070057
2015-04-15 14:37:24, Error                 SP     CSetupPlatform::DownloadDynamicUpdates: Failed to download updates. Error: 0x80070057[gle=0x00000012]
2015-04-15 14:37:24, Error                 MOUPG DUImage: Failed to execute DUImage LangPack search and download [0x80070057][gle=0x00000012]
2015-04-15 14:37:34, Error                 CONX   WlanOpenHandle failed with error 00000426
2015-04-15 14:37:34, Error                 CONX   Failed to initialize wireless class data 80070426
2015-04-15 14:37:43, Error                 CONX   Failed to get class data from printer 80070057
2015-04-15 15:14:36, Error                 MOUPG Invalid UI subphase [0]. Progress phase arrays must be updated.
2015-04-17 19:17:56, Error                 SP     Using current time as Recovery Timestamp.
2015-04-17 19:19:58, Error                 CONX   ConX::Compatibility::CCompatibilityController::GetDriverBlockType: Found 0 compat info nodes for the specified driver
package instead of just one.
2015-04-17 19:21:31, Error                 CONX   ConX::Compatibility::CCompatibilityController::GetDriverBlockType: Found 0 compat info nodes for the specified driver
package instead of just one.
2015-04-17 19:25:07, Error                 SP     pSPRemoveUpgradeRegTree: failed to delete reg tree HKLM\SYSTEM\Setup\Upgrade[gle=0x00000005]
2015-04-17 19:25:37, Error      [0x080831] MIG    CSIAgent: Invalid xml format: FormatException: "name" attribute is mandatory for the <transforms> element. class UnBCL::ArrayList<class Mig::CMXEXmlComponent
*> *__thiscall Mig::CMXEMigrationXml::LoadComponents(class Mig::CPlatform *,class UnBCL::String *,class UnBCL::XmlNode *,class UnBCL::String *,class Mig::CMXEMigrationXml *,class Mig::CMXEXmlComponent *,class Mig::CUserContext *)
2015-04-17 19:25:47, Error      [0x080831] MIG    CSIAgent: Invalid xml format: FormatException: Component with display name: Plugin/{566E8EC0-8A5C-4283-AD99-62004A6D128B} already loaded __thiscall Mig::CMXEMigrationXml::CMXEMigrationXml(class
Mig::CPlatform *,class UnBCL::String *,class UnBCL::XmlDocument *,class UnBCL::String *,class UnBCL::String *)
2015-04-17 19:26:17, Error                 CSI    00000001 (F) 80220008 [Error,Facility=FACILITY_STATE_MANAGEMENT,Code=8] #718# from CWcmScalarInstanceCore::GetCurrentValue(options
= 393216 (0x00060000), status = [6]"(null)", value = { type: 40972 (0x0000a00c), bytes ( 12 (0x0000000c) ): 65006e002d00550053000000 })
[gle=0x80004005]
2015-04-17 19:27:09, Error      [0x0808fe] MIG    Plugin {65cbf70b-1d78-4cac-8400-9acd65ced94a}: CreateProcess(s) failed. GLE = d
2015-04-17 19:27:09, Error                 CSI    00000002 (F) 80220008 [Error,Facility=FACILITY_STATE_MANAGEMENT,Code=8] #74376# from CWcmScalarInstanceCore::GetCurrentValue(options
= 393216 (0x00060000), status = [6]"(null)", value = { type: 40972 (0x0000a00c), bytes ( 12 (0x0000000c) ): 65006e002d00550053000000 })
[gle=0x80004005]
2015-04-17 19:32:53, Error      [0x0808fe] MIG    Plugin {ee036dc0-f9b7-4d2d-bb94-3dd3102c5804}: BRIDGEMIG: CBrgUnattend::CollectBridgeSettings failed: 0x1, 0
2015-04-17 19:33:02, Error      [0x0808fe] MIG    Plugin {ff9c714f-b864-4f43-ae39-ec07d7385abe}: Unable to open service key '\Driver\ACPI_HAL'. Error = 0x000000A1
2015-04-17 19:33:18, Error      [0x0808fe] MIG    Plugin {526D451C-721A-4b97-AD34-DCE5D8CD22C5}: [shmig] Failed to get preferred homegroup with hr=0x80070490
2015-04-17 19:44:17, Error                        CSetupAutomation::Resurrect: File not found: C:\$Windows.~BT\Sources\Panther\automation.dat[gle=0x00000002]
2015-04-17 19:44:17, Error                 SP     CSetupPlatform::ResurrectAutomation: Failed to resurrect automation: 0x80070002[gle=0x00000002]
2015-04-20 19:08:28, Error                 DU     DU::CDUSession::Initialize: Failed to begin IUpgradeInternalSession. hr = 0x80004002[gle=0x000003f0]
2015-04-20 19:08:32, Error                        CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
2015-04-20 19:09:27, Error                 MOUPG DUImage: Failed to execute DUImage critical search and download [0x80070091]
2015-04-20 19:09:48, Error                 DU     DU::CDUSession::Initialize: Failed to begin IUpgradeInternalSession. hr = 0x80004002[gle=0x000003f0]
2015-04-20 19:10:02, Error                 SP     pDUSearch: DUSearch failed. hr = 0x80070057
2015-04-20 19:10:02, Error                 SP     CDownloadDUUpdates::DoExecuteInternal: Failed to search for updates. hr = 0x80070057
2015-04-20 19:10:02, Error                 SP     CSetupPlatform::DownloadDynamicUpdates: Failed to download updates. Error: 0x80070057[gle=0x00000012]
2015-04-20 19:10:02, Error                 MOUPG DUImage: Failed to execute DUImage FOD search and download [0x80070057][gle=0x00000012]
2015-04-20 19:10:17, Error                 MOUPG DUImage: Failed to execute DUImage driver search and download [0x80070091]
2015-04-20 19:10:30, Error                 SP     pDUSearch: DUSearch failed. hr = 0x80070057
2015-04-20 19:10:30, Error                 SP     CDownloadDUUpdates::DoExecuteInternal: Failed to search for updates. hr = 0x80070057
2015-04-20 19:10:30, Error                 SP     CSetupPlatform::DownloadDynamicUpdates: Failed to download updates. Error: 0x80070057[gle=0x00000012]
2015-04-20 19:10:30, Error                 MOUPG DUImage: Failed to execute DUImage LangPack search and download [0x80070057][gle=0x00000012]
2015-04-20 19:11:17, Error                 CONX   WlanOpenHandle failed with error 00000426
2015-04-20 19:11:17, Error                 CONX   Failed to initialize wireless class data 80070426
2015-04-20 19:11:24, Error                 CONX   Failed to get class data from printer 80070057
2015-04-20 19:43:17, Error                 MOUPG Invalid UI subphase [0]. Progress phase arrays must be updated.
2015-04-20 19:45:27, Error                 SP     Using current time as Recovery Timestamp.
2015-04-20 19:47:55, Error                 CONX   ConX::Compatibility::CCompatibilityController::GetDriverBlockType: Found 0 compat info nodes for the specified driver
package instead of just one.
2015-04-20 19:52:21, Error                 SP     pSPRemoveUpgradeRegTree: failed to delete reg tree HKLM\SYSTEM\Setup\Upgrade[gle=0x00000005]
2015-04-20 19:52:51, Error      [0x080831] MIG    CSIAgent: Invalid xml format: FormatException: "name" attribute is mandatory for the <transforms> element. class UnBCL::ArrayList<class Mig::CMXEXmlComponent
*> *__thiscall Mig::CMXEMigrationXml::LoadComponents(class Mig::CPlatform *,class UnBCL::String *,class UnBCL::XmlNode *,class UnBCL::String *,class Mig::CMXEMigrationXml *,class Mig::CMXEXmlComponent *,class Mig::CUserContext *)
2015-04-20 19:53:23, Error      [0x080831] MIG    CSIAgent: Invalid xml format: FormatException: Component with display name: Plugin/{566E8EC0-8A5C-4283-AD99-62004A6D128B} already loaded __thiscall Mig::CMXEMigrationXml::CMXEMigrationXml(class
Mig::CPlatform *,class UnBCL::String *,class UnBCL::XmlDocument *,class UnBCL::String *,class UnBCL::String *)
Thanks!

This is the way I fixed it when I got this issue. This may need a little bit of technical know how. If you have a graphics card in your computer, you must change anything that is plugged into your motherboard (this can usually be identified as the one that
is near all of the usb ports on the backside of your case), into your graphics card, easily identified as a few display ports further away from the backside USB ports. If you don't have any plugged in their in the first place, don't fret! Shut down and enter
BIOS upon boot up, go to your Display option, and disable Integrated Graphics, this disables the graphics drivers on your CPU, this will only work if you have a graphics card. Once you do that, exit by saving. Then boot up, go to settings, and update and recovery,
and install and enjoy. This should work.

Officejet Pro K550 in Windows Technical Preview

The most recent update to Windows Technical Preview Build 9879 keeps stopping the print spooler when the Officejet Pro K550 is attached. It worked fine in the previous builds. Any ideas? I need to keep the USB cable disconnected until I want to print and then uninstall the printer each time or keep restarting the print spooler each time I want to print anything.
Thanks

Hi,
Try running Windows Update and check if any driver update is available, any drivers for the Technical Preview are only available from Microsoft Update servers.
If the issue persists, you will need to wait till an update will become available by microsoft, as a beta OS you are likley to experience this kind of issues, devices hasn't have been tested much, as well as the entire operating system.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Couldn't install windows technical preview on a usb flash

Hi,
couldn't install windows technical preview on a usb flash setup.
please say me the solution to this problem

Hi,
Any errors poped out? You may try to switch to a USB 2.0 port and check this issue again.
If you have DVD drive available, you may also choose to install Windows 10 through DVD, download the ISO file using this tool:
Windows USB/DVD Download Tool
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Hyper-V Not Enabling on Build 10041 of the Windows Technical Preview

So I am running build 10041 of the Windows technical preview. I am not able to enable the Hyper-V Platform. Here are the steps:
Go to Control Panel -> Program and Features -> Turn Windows features on or off - > Select Hyper-V Platform Checkbox.
Windows will perform the install and request a restart.
While restarting, I will get the updating windows message and at about 95 % it gives me a message to the tune of "Unable to update windows" and it roll backs the changes and restarts. No Hyper-V.
Note that I can install the Hyper-V tools with out any issues just the Hyper-V Hypervisor and Hyper-V services will not install.
Anyone have any ideas?

So I am running build 10041 of the Windows technical preview. I am not able to enable the Hyper-V Platform. Here are the steps:
Go to Control Panel -> Program and Features -> Turn Windows features on or off - > Select Hyper-V Platform Checkbox.
Windows will perform the install and request a restart.
While restarting, I will get the updating windows message and at about 95 % it gives me a message to the tune of "Unable to update windows" and it roll backs the changes and restarts. No Hyper-V.
Note that I can install the Hyper-V tools with out any issues just the Hyper-V Hypervisor and Hyper-V services will not install.
Anyone have any ideas?
Can't provide an answer, but I have the same problem. I'd originally let my 9926 build, with Hyper-V installed and working, upgrade to the 10041 build. After installation things seemed OK, until I noticed I had no network connections working. They were all
still there, but I had no network access and trying to view the properties of either my physical NIC or the Hyper-V switches just gave me an error.
I tried uninstalling Hyper-V, but after doing that Windows wouldn't boot at all. It'd begin to start up, get almost to the login screen, but then die and reboot. I decided a rebuild would probably be best anyway, so I chose to do a Refresh when it offered
me the advanced repair options.
The Refresh mostly went well, the PC is running better now with a clean install, but I'm now stuck in the same situation where the Hyper-V server won't install. It installs, reboots, gets part way through configuring, then claims to fail and backs it all
out again. No real diagnostic info presented as to why.

Is Windows Technical Preview Build 9926 Last Build before Release (PC) ??

As @ Mar 14 2015 - My WIN10 build Installations (9926) no longer have "Preview Builds" option,
in Update & Recovery Menu (PC Settings)
Build 10036 announced by rumour mill...
Dell Precision 490 Desktop Intel XEON X5365 (Quadcore) x 2 Chipset X5000 321x/3221ESB Southbridge AMD Radeon HD7750 HDD ST3000DM001 3TB HDD ST2000DM001 2TB SSD OCZ Vertex 3 120GB SSD OCZ Vector3 128GB x2 RAID 0 Offline WD10EALX 1TB Barracuda 7200.10 250GB
USB 3.0 WD MyBook 1230 3TB USB 3.0 WD MyBook 1130 2TB

Microsoft Community got there first...
http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/is-windows-technical-preview-build-9926-last-build/bb0bed43-4d64-4e1b-acaa-fee158f034ce
Thanks Andre da Costa
Dell Precision 490 Desktop Intel XEON X5365 (Quadcore) x 2 Chipset X5000 321x/3221ESB Southbridge AMD Radeon HD7750 HDD ST3000DM001 3TB HDD ST2000DM001 2TB SSD OCZ Vertex 3 120GB SSD OCZ Vector3 128GB x2 RAID 0 Offline WD10EALX 1TB Barracuda 7200.10 250GB
USB 3.0 WD MyBook 1230 3TB USB 3.0 WD MyBook 1130 2TB
We only reply to questions posted in TechNet forums.
We don't go to MS Community and find out if the same question has been answered or not before we post the replies.
There is no such thing as who gets "there" first.

Windows To Go Device using Windows Technical Preview

I have successfully made a Windows To Go Device by the steps in this Technet forum post:
http://social.technet.microsoft.com/wiki/contents/articles/6991.windows-to-go-step-by-step.aspx
Note: I used a host machine running Windows Technical Preview already to make this device, since older versions (Windows 8/8.1) of DISM don't work for imaging Windows Technical Preview Installation.
Everything works fine. The device on which Windows To Go is running is a high-speed USB 3.0 HDD, so there is no significant performance difference. However, while updating to the new build 9860, the upgrade fails stating that you can't install it to a USB
Flash Drive.
Question 1) Does this problem has anything to do with the fact that I am NOT using the enterprise version of Windows Technical Preview, the only version which "technically" supports Windows To Go feature.
Question 2) My host machine (which I used to create Windows TP) has been updated to Build 9860. Should I use DISM to capture the image of this updated build and use it to image the WTG HDD device? Can I get detailed instructions on how to do this?

Hi G.One1,
In current time, there is no direct way to perform the upgrade, in both Native Boot to VHD and Windows To Go.
I was thinking a way to create a ISO file also, but the method would be a bit of complicated.
Here is my thought and steps.
First, if we update our Windows 10 Technical Preview for Enterprise to 9860 build, we would get a install.esd file, in Windows 8.1, here is a tool called update advisor, which would
convert the esd file to ISO file, but in Windows 10 Technical Preview, there is no such thing. So my thought is to use the install.esd to create an install.wim or bootable ISO file.
In my first thought, I want to sysprep an updated OS, but it failed without doubt. So, I choose to use Reset option. Install.esd would be recognized a compressed install.wim.
I copy the install.esd to a 9841 build OS, for example, I copy it to C:\RecoveryImage, and run
reagentc.exe /setosimage /path C:\RecoveryImage /target c:Windows /Index 1 , it cannot reset the Windows OS.
I use Reset option in 9860 build OS, when it is finished, run sysprep, it ran well, I can capture 9860 build wim file (WDS server capture or dism command). We rename it as install.wim.
Use the captured install.wim to set recovery image in 9841 build(copy install.wim to C:\RecoveryImage, and run
reagentc.exe /setosimage /path C:\RecoveryImage /target c:Windows /Index 1), 9841 build succeed upgrade to 9860 build via Reset and Refresh options.
For Windows To Go, Yes, you can use all Windows features with your Windows To Go workspace. The only currently unsupported features are using the Windows Recovery Environment and PC Reset &
Refresh. So this way is not appropriate in your situation. But here we use these steps can convert the install.esd to install.wim, and use reset and refresh option to upgrade current build.
Refresh would upgrade without losing setting and data. For your scenario, use dism to apply 9860 install.wim would be your option.
Alex Zhao
TechNet Community Support

Adding features to Windows Technical Preview

Why serial code not work with Windows Technical Preview evalution copy Build 9879?
Add features to Windows Technical Preview and asks for serial key, two different serial key but not work.

Hi,
Where did you get the product key? Online purchase is not available at this moment (my region is set to US), and please note that the product key for "Add feature" is not the same key for activating system.
If you have any feedbacks on Windows 10 Technical Preview, please click the search botton in the left bottom of the screen, type "Windows Feedback", then submit your feedback.
Regards.
Yolanda Zhu
TechNet Community Support

"Couldn't Install Windows Technical Preview"

I'm on the original install and have seen the above message several times, followed by
"We couldn't update the system reserved partition."
I dual boot with Windows7 on a seperate hdd. And I use EasyBCD as the switcher at boot-up.
Any help would be appreciated. Thanks
Paul

Why or how did "system reserved partition" get involved ?
All my dual booting had been done using this method.......
http://www.howtogeek.com/197647/how-to-dual-boot-windows-10-with-windows-7-or-8/
It works all the time. Want to give it a try ?

Windows Technical Preview Build 9926 update

Hi,
I am trying to update my Windows 10 TP installation and it seems that it fails to download. I am behind a proxy server in the office with no way around it. Windows Update fails with error 0x80072ee2. What I have picked up is that I can
get the update list if I set a proxy server in BITS using "bitsadmin /util /setieproxy localsystem proxy1:port "bypass list". However bits fails to download the updates returning either Error or Transient_Error. Can you please assist
with this issue?
Regards,
Riaan
EDIT: I set proxy settings of each bits download job to PRECONFIG and the updates downloaded and installed.

Hi,
Did you set the proxy server via IE? Do you mean that the Windows Update Client ignore the proxy settings? To make Windows Update use the proxy setting, please execute the following command from cmd
Netsh winhttp import proxy source=ie
You can refer to this following KB for "how Windows Update finds proxy settings"
How the Windows Update client determines which proxy server to use to connect to the Windows Update Web site
http://support.microsoft.com/kb/900935
Yolanda Zhu
TechNet Community Support

Problem installing Windows Technical Preview build 9926

I am not able to install the Technical Preview on my computer. Everything looks fine and in the end it says "applying computer settings" and counts the percents before it reboots again.
During the boot it says evaluation build 9926. Then it says Restoring the old windows as it was before... I can't get this to work.
This is the windowsupdate.log file and the last attempt of installing at the end of the file. 21st of march.
https://onedrive.live.com/redir?resid=EFA0853808EA8416!80492&authkey=!APrJtEAGwfnZydU&ithint=file%2clog

PH
Do you know that you can make an ISO to install 10041 and not have to install 9926?
http://microsoft-news.com/download-windows-10-build-10041-iso-image/
Wanikiya and Dyami--Team Zigzag

Update on windows 10 preview version 10130 blue screens with f-secure as cause supplied by talktalk

As soon as 10130 starts up blue screen critical process died the f-secure is supplied by talktalk version Super Safe Boost 2.21 build 285CCF CUIF 10.03 build 258
CCF DAAS2 1.10 build 369
CCF Guts2 2.01 build 418
CCF Upstream 2.01 build 980
CCF Diagnostics 8.01 build 924
CCF Scanning 1.51 build 112.309
CCF Network 1.03 build 102
CCF Reputation 2.0 build 1337 as soon as install is about to complete Blue Screen critical-process-died But as windows 10 no longer has F8 to enter safe mode and unable to do msconfig either it would leave a novice user with useless Computer. PS i had re-enabled F8 option so was able to do restore back having taken a checkpoint before adding the anti-virus also it left the pc in a mess and i had to do a chkdsk /F to recover the pc correctly as windows 10 was just like safe mode with no apps apart fromt event viewer and Run so able to do CMD.EXE and recover the situation i even re-installed the latest 10130 iso to guarantee a clean situation and again as soon as f-secure is installed it blue screens and can not be uninstalled as instalaion shows installed but as had nor completed will only remove icon all previous releases worked as i was testing office 2003, photoshop etc as wanted to ensure migration from windows 7 to 10 would be uneventfull running in dual boot mode ------------------------------- how can i debug this problem . event viewer shows 3 errors------------------------------------------------------------------------Fault bucket , type 0Event Name: WindowsUpdateFailure3Response: Not availableCab Id: 0Problem signature:P1: 10.0.10074.0P2: 800b0101P3: F4932C69-501D-49CA-B507-0DF0531CB356P4: DownloadP5: 202P6: 0P7: 0P8: Dynamic UpdateP9: {7971F918-A847-4430-9279-4A52D1EFE18D}P10: 0Attached files:These files may be available here:　Analysis symbol:Rechecking for solution: 0Report ID: 3a290198-0a02-11e5-ab6f-0016448c363fReport Status: 262144Hashed bucket:------------------------------------------------------------------------------ Fault bucket , type 0Event Name: WindowsUpdateFailure3Response: Not availableCab Id: 0Problem signature:P1: 10.0.10074.0P2: 800b0101P3: F4932C69-501D-49CA-B507-0DF0531CB356P4: DownloadP5: 202P6: 0P7: 0P8: Dynamic UpdateP9: {7971F918-A847-4430-9279-4A52D1EFE18D}P10: 0Attached files:C:\WINDOWS\Temp\WER15AB.tmp.WERInternalMetadata.xmlThese files may be available here:C:\ProgramData\Microsoft\Windows\WER\ReportQueue\NonCritical_10.0.10074.0_514ab7a9a8ce992752eb54e1dd1412dafd33beb5_00000000_cab_110415cbAnalysis symbol:Rechecking for solution: 0Report ID: 3a290198-0a02-11e5-ab6f-0016448c363fReport Status: 4Hashed bucket:------------------------------------------------------------------------------------- Fault bucket 91736524612, type 5Event Name: WindowsUpdateFailure3Response: Not availableCab Id: 0Problem signature:P1: 10.0.10074.0P2: 800b0101P3: F4932C69-501D-49CA-B507-0DF0531CB356P4: DownloadP5: 202P6: 0P7: 0P8: Dynamic UpdateP9: {7971F918-A847-4430-9279-4A52D1EFE18D}P10: 0Attached files:C:\WINDOWS\Temp\WER15AB.tmp.WERInternalMetadata.xmlThese files may be available here:C:\ProgramData\Microsoft\Windows\WER\ReportArchive\NonCritical_10.0.10074.0_514ab7a9a8ce992752eb54e1dd1412dafd33beb5_00000000_111c1bb6Analysis symbol:Rechecking for solution: 0Report ID: 3a290198-0a02-11e5-ab6f-0016448c363fReport Status: 0Hashed bucket: e0ac3ecdf8185ff6d24e9c67904da683 maybe the version supplied to talktalk has a flaw which you have fixed and talktalk need a new version

Hi
Currently all versions of F-Secure Internet Security / SAFE will bluescreen with Windows 10 starting from Windows 10 build 10130. Only the beta version of F-Secure SAFE ("fs protection") is compatible.
We know what is causing the problem and are working on maintenance releases. The products will be updated before Windows 10 launches.
Ville
(F-Secure R&D)

Windows 10 to be free upgrade for first year for users of Windows Technical Preview?

Hello, in article I have read that will upgrade to Windows 10 users for free Win 7 & 8.1. I want to ask how it will be with those who use a version of the technical prewiev. I will also have a free update?
Thanks for the answers
Vít Repka

after 1 year if I do not want to purchase the upgrade, what happen to my computer, will go back to window 7?
What do you mean? You've already installed the Win 10 tech preview and you're wondering if it will automatically revert to the old software you were running some months ago after the trial period expires?
LOL
No.
Your expired Win 10 preview will pop up an "expired" notice and become less usable. Assuming it works like all other trial periods of Windows, it will limit its functionality and start shutting itself down every few hours. If you
want to revert it, it will be up to you to reinstall the old version. And then can anyone guarantee that it will reactivate properly?
Beyond that, and to the original point of this thread, what the mechanics will actually be for upgrading to Win 10 after its release on a system that was originally properly licensed for an earlier version of Windows are still not clear. We'd like
to hope that a product code for a legitimate licensed copy of an older version would just work to install Windows 10 from a DVD (ISO), but no doubt it will be more complicated than that. It shouldn't be, but it almost certainly will be.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

Lost my internet connectivity in my HyperV machines when updating to Windows 10 Preview 10061

Hi,
Windows 10 TP forced me an update to 10061 and this update caused me to loose my internet connectivity in my HyperV machines. I was sharing my wireless connection with an internal Virtual Network Adpater.
Right now I've tried everything. I mean really everything...and no solution.
Its probably another bug from this version but it has a huge impact to whoever is working on development in VM.
Is there any solution at sight? I can't connect the phisical network BTW because I have no access to one where I work.
Thank you

There are many phases for update, it first check version of your Windows Phone and some additional information and then based in details, it will start downloading the required update file. During these checking you will need internet connection and if internet
connection lost, then the process will stop and you could resume it later and either it will continue or it will restart doing what it been done but it won't bring any harm to your device. Once download is completed, it will start installing the update and
you won't need internet connection while it is installing and after installation been done it will recheck for additional update and you need internet connection.
In general if you suddenly disconnect from internet, it won't bring any harm or damage in your PC and you could resume and continue once you get back your connection. During upgrade , it is important to make sure your device is fully charged, if your phone
suddenly turn off during upgrade process, there might be some problems in some cases.

I have Nokia 630 and updated to Windows10 Technical Preview to Explore

Hi All,
I would like to seek for your help regarding my issue under "Time & Language" as I want to setup Cortana wherein it stated "Cortana is not available in your market", and when I click the "Language" it will not open.
Please let me know what am I missing.
Best Regards,
Angiela

On Fri, 13 Mar 2015 14:26:42 +0000, raym0109 wrote:
I would like to seek for your help regarding my issue under "Time & Language" as I want to setup Cortana wherein it stated "Cortana is not available in your market", and when I click the "Language" it will not open.
Please let me know what am I missing.
Please post Windows 10 Phone questions to:
https://social.technet.microsoft.com/Forums/en-US/home?forum=WinPreview2015Phone
Paul Adare - FIM CM MVP
"Unlike cockroaches, Windows NT is something you can't
possibly be unfair to." -- Peter da Silva

Couldn't Update to Windows 10 Technical Preview 0x8007000E - 0x2000C

Similar Messages

Maybe you are looking for