COULDN'T VERIFY YOUR CODE!!

Am having a problem to activate the product on my windows 8.1 Pro laptop, Whenever I enter the provided code I receive the following error message:
COULDN'T VERIFY YOUR CODE, PLEASE TRY AGAIN LATER NOTE: The subscription for 5 devices and I have activated successfully on my mobile only.I didn't uninstall or reinstall the SW.

Try the troubleshooting steps in
http://pondini.org/TM/Troubleshooting.html

Similar Messages

On my i phone account is says...we couldn't verify your address. make sure you've entered the correct street, city, state, and postal code.

ive recently purchased an i phone. i have an ipod with and account. while trying to access i tunes or apps for purchase, i am able to log in, but then it asks me to validate my info. so i do. same credit card, card number, sec code. billing address, everything that is used on my ipod. then i try to verify and it says....we couldn't verify your address. make sure you've entered the correct street, city state, and postal code. please help.

I'm suddenly having this same problem. I've had the other problem for a month or two where I had to reverify my payment info every day, and now when I do that I can't because it says the address that's been in there for 5 years is now unable to be verified. Anyone else? Any suggestions?

Could not verify your code please try again later

Hello I cannot verify code in freedome windows. This is my code XXXXXXXXX
EDIT:REMOVE PII

Hello Mukekaton,
Are you still having the same problem? Which kind of plateform and network are you on?

Office 365 ProPlus couldn't verify subscription behind proxy

Hi,
I have installed Office 365 Pro Plus, and it all works well. Maybe a month after i installed it, the title bar turned red on my office apps saying i had an unlicensed product, and i had another red bar within the apps saying
COULDN'T VERIFY SUBSCRIPTION Outlook couldn't verify your Office 365 subscription. Please make sure you're connected to the Internet.
There's a Retry button as well which tries, and I assume fails when I click it.
If I connect my PC directly to the internet then this verification process appears to succeed, as the red bars will go away. But how do i get it working behind my proxy? The proxy is set in Internet Options, and we have no problems otherwise.
I have had a look here: http://technet.microsoft.com/library/hh373144.aspx
All the "Office 365 ProPlus URLs" work fine in my browser except sls.microsoft.com (but this doesn't work with a direct internet connection either).
We have a KMS server in our environment, but as far as I can see Office 365 does not connect to KMS.
Any ideas what else this could be?
Thanks,
Nick.

Hi Nick,
Your description suggests it is a proxy access issue. I would suggest you check this Technet article, especially the
Issue: Internet Connection Required section:
http://technet.microsoft.com/en-us/library/gg998767(v=office.15).aspx#BKMK_Internet
If your organization requires Internet connectivity through a specific proxy server and
Automatically detect settings should be unchecked, you must enable Office 365 services to connect. To do this, use the Bitsadmin command-line tool and run the following command:
bitsadmin /util /setieproxy networkservice MANUAL_PROXY proxyserver:port
Hope it is helpful to you. By the way,
Microsoft Office 365 Community > Forums > Deploy Office 365 is a better source for this kind of problem and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.
Regards,
Ethan Hua CHN
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Couldn't verify 'C:\Windows\ccmsetup\ccmsetup.cab' authenticode signature. Return code 0x80096001 - SCCM 2012 R2 Client Deployment

Hi All,
I installed SCCM 2012 R2 one primary site from one of our customer & using SQL 2012 SP1 DB at the back-end.
Facing Issues while deploying agent from one of our client machine - OS - window 7 Professional Sp1:
==========[ ccmsetup started in process 3828 ]==========
ccmsetup 25-02-2014 02:20:37 PM
284 (0x011C)
Running on platform X86 ccmsetup
25-02-2014 02:20:37 PM 284 (0x011C)
Updated security on object C:\Windows\ccmsetup\cache\.
ccmsetup 25-02-2014 02:20:37 PM
284 (0x011C)
Launch from folder C:\Windows\ccmsetup\ ccmsetup
25-02-2014 02:20:37 PM 284 (0x011C)
CcmSetup version: 5.0.7958.1000 ccmsetup
25-02-2014 02:20:37 PM 284 (0x011C)
Successfully started the ccmsetup service ccmsetup
25-02-2014 02:20:37 PM 332 (0x014C)
In ServiceMain ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
Folder 'Microsoft\Configuration Manager' not found. Task does not exist.
ccmsetup 25-02-2014 02:20:37 PM
332 (0x014C)
CcmSetup is exiting with return code 0 ccmsetup
25-02-2014 02:20:37 PM 332 (0x014C)
Running on 'Microsoft Windows 7 Professional ' (6.1.7601). Service Pack (1.0). SuiteMask = 272. Product Type = 18
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Ccmsetup command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice "/config:C:\Windows\ccmsetup\MobileClientUnicode.tcf" "/RetryWinTask:1"
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Command line parameters for ccmsetup have been specified. No registry lookup for command line parameters is required.
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice "/config:C:\Windows\ccmsetup\MobileClientUnicode.tcf" "/RetryWinTask:1"
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
SslState value: 224 ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
CCMHTTPPORT: 80 ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
CCMHTTPSPORT: 443 ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
CCMHTTPSSTATE: 480 ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
CCMHTTPSCERTNAME: ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
FSP: SCCM.MYDOMAIN.COM ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
CCMCERTISSUERS: CN=MYDOMAIN-CA-CA; DC=MYDOMAIN; DC=COM
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
CCMFIRSTCERT: 1 ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
Config file: C:\Windows\ccmsetup\MobileClientUnicode.tcf
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Retry time: 10 minute(s)
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
MSI log file: C:\Windows\ccmsetup\Logs\client.msi.log
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
MSI properties: INSTALL="ALL" SMSSITECODE="PRI" CCMHTTPPORT="80" CCMHTTPSPORT="443" CCMHTTPSSTATE="480" FSP="SCCM.MYDOMAIN.COM" CCMCERTISSUERS="CN=MYDOMAIN-CA-CA; DC=MYDOMAIN; DC=COM"
CCMFIRSTCERT="1" ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
Source List: ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
\\SCCM.MYDOMAIN.COM\SMSClient
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
\\SCCMDMZ.MYDOMAIN.COM\SMSClient
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
\\SCCM.MYDOMAIN.COM\SMSClient
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
\\SCCMDMZ.MYDOMAIN.COM\SMSClient
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
MPs: ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
SCCM.MYDOMAIN.COM
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
No version of the client is currently detected.
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Folder 'Microsoft\Configuration Manager' not found. Task does not exist.
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Attempting #1 retry. Max 5 retries. ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
Updated security on object C:\Windows\ccmsetup\.
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Sending Fallback Status Point message to 'SCCM.MYDOMAIN.COM', STATEID='100'.
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Failed to get client version for sending messages to FSP. Error 0x8004100e
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Params to send FSP message '5.0.7958.1000 Deployment '
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Request failed: 500 Internal Server Error
FSPStateMessage
25-02-2014 02:20:37 PM 1480 (0x05C8)
Running as user "SYSTEM" ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
Detected 69650 MB free disk space on system drive.
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Checking Write Filter Status. ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
This is not a supported write filter device. We are not in a write filter maintenance mode.
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Performing AD query: '(&(ObjectCategory=mSSMSManagementPoint)(mSSMSDefaultMP=TRUE)(mSSMSSiteCode=PRI))'
ccmsetup 25-02-2014 02:20:38 PM
1480 (0x05C8)
OperationalXml '<ClientOperationalSettings><Version>5.00.7958.1000</Version><SecurityConfiguration><SecurityModeMask>0</SecurityModeMask><SecurityModeMaskEx>448</SecurityModeMaskEx><HTTPPort>80</HTTPPort><HTTPSPort>443</HTTPSPort><CertificateStoreName></CertificateStoreName><CertificateIssuers>CN=MYDOMAIN-CA-CA;
DC=MYDOMAIN; DC=COM</CertificateIssuers><CertificateSelectionCriteria></CertificateSelectionCriteria><CertificateSelectFirstFlag>1</CertificateSelectFirstFlag><SiteSigningCert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iteSigningCert></SecurityConfiguration><RootSiteCode>PRI</RootSiteCode><CCM>
<CommandLine>SMSSITECODE=PRI</CommandLine> </CCM><FSP> <FSPServer>SCCM.MYDOMAIN.COM</FSPServer> </FSP><Capabilities SchemaVersion ="1.0"><Property Name="SSLState" Value="0" /></Capabilities><Domain
Value="MYDOMAIN.COM" /><Forest Value="MYDOMAIN.COM" /></ClientOperationalSettings>'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Unable to open Registry key Software\Microsoft\CCM. Return Code [80070002]. Client HTTPS state is Unknown.
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
The MP name retrieved is 'SCCM.MYDOMAIN.COM' with version '7958' and capabilities '<Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
MP 'SCCM.MYDOMAIN.COM' is compatible ccmsetup
25-02-2014 02:20:39 PM 1480 (0x05C8)
Retrieved 1 MP records from AD for site 'PRI'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Retrived site version '5.00.7958.1000' from AD for site 'PRI'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
SiteCode: PRI ccmsetup
25-02-2014 02:20:39 PM 1480 (0x05C8)
SiteVersion: 5.00.7958.1000
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Ccmsetup is being restarted due to an administrative action. Installation files will be reset and downloaded again.
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Only one MP SCCM.MYDOMAIN.COM is specified. Use it.
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Searching for DP locations from MP(s)... ccmsetup
25-02-2014 02:20:39 PM 1480 (0x05C8)
Current AD site of machine is Default-First-Site
LocationServices 25-02-2014 02:20:39 PM
1480 (0x05C8)
Local Machine is joined to an AD domain LocationServices
25-02-2014 02:20:39 PM 1480 (0x05C8)
Current AD forest name is MYDOMAIN.COM, domain name is MYDOMAIN.COM
LocationServices 25-02-2014 02:20:39 PM
1480 (0x05C8)
DhcpGetOriginalSubnetMask entry point is supported.
LocationServices 25-02-2014 02:20:39 PM
1480 (0x05C8)
Begin checking Alternate Network Configuration
LocationServices 25-02-2014 02:20:39 PM
1480 (0x05C8)
Finished checking Alternate Network Configuration
LocationServices 25-02-2014 02:20:39 PM
1480 (0x05C8)
Adapter {95A6D3CE-4F28-4E55-A29A-FF3F1A317C61} is DHCP enabled. Checking quarantine status.
LocationServices 25-02-2014 02:20:39 PM
1480 (0x05C8)
Adapter {6024AB68-EB5E-4370-BD9E-8B2CEFE261A8} is DHCP enabled. Checking quarantine status.
LocationServices 25-02-2014 02:20:39 PM
1480 (0x05C8)
Sending message body '<ContentLocationRequest SchemaVersion="1.00">
<AssignedSite SiteCode="PRI"/>
<ClientPackage/>
<ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0"
UseInternetDP="0">
<ADSite Name="Default-First-Site"/>
<Forest Name="MYDOMAIN.COM"/>
<Domain Name="MYDOMAIN.COM"/>
<IPAddresses>
<IPAddress SubnetAddress="10.0.0.0" Address="10.10.10.192"/>
</IPAddresses>
</ClientLocationInfo>
</ContentLocationRequest>
' ccmsetup
25-02-2014 02:20:39 PM 1480 (0x05C8)
Sending message header '<Msg SchemaVersion="1.1"><ID>{F6331322-941A-4E44-974F-A755B1B016A4}</ID><SourceHost>POOJASETHI</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:POOJASETHI:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>SCCM.MYDOMAIN.COM</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-02-25T08:50:39Z</SentTime><Body
Type="ByteRange" Offset="0" Length="1126"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
CCM_POST 'HTTP://SCCM.MYDOMAIN.COM/ccm_system/request'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Content boundary is '--aAbBcCdDv1234567890VxXyYzZ'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Received header '<Msg SchemaVersion="1.1">
<ID>{14ADB6F1-95C1-4EEF-B8BA-16CD020ACFCF}</ID>
<SourceID>GUID:526CE573-6351-407E-AC2A-2C3927979AD9</SourceID>
<SourceHost>SCCM</SourceHost>
<TargetAddress>direct:POOJASETHI:LS_ReplyLocations</TargetAddress>
<ReplyTo>MP_LocationManager</ReplyTo>
<CorrelationID>{00000000-0000-0000-0000-000000000000}</CorrelationID>
<Priority>3</Priority>
<Timeout>600</Timeout>
<Capabilities><Property Name="SSL" Version="1"/></Capabilities><ReplyCapabilities><AllowRegistrationReset>direct:SCCM:ClientRegistration</AllowRegistrationReset></ReplyCapabilities><TargetHost>POOJASETHI</TargetHost><TargetEndpoint>LS_ReplyLocations</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>https</Protocol><SentTime>2014-02-25T08:50:39Z</SentTime><Body
Type="ByteRange" Offset="0" Length="3494"/><Hooks><Hook3 Name="zlib-compress"/><Hook Name="authenticate"><Property Name="Signature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roperty><Property
Name="AuthSenderMachine">SCCM;SCCM.MYDOMAIN.COM;</Property><Property Name="MPSiteCode">PRI</Property></Hook></Hooks><Payload Type="inline"/></Msg>'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Received reply body '<ContentLocationReply SchemaVersion="1.00"><ContentInfo PackageFlags="16777216"><ContentHashValues/></ContentInfo><Sites><Site><MPSite SiteCode="PRI" MasterSiteCode="PRI"
SiteLocality="LOCAL" IISPreferedPort="80" IISSSLPreferedPort="443"/><LocationRecords><LocationRecord><URL Name="http://SCCM.MYDOMAIN.COM/SMS_DP_SMSPKG$/PRI00003" Signature="http://SCCM.MYDOMAIN.COM/SMS_DP_SMSSIG$/PRI00003"/><ADSite
Name="Default-First-Site"/><IPSubnets><IPSubnet Address="10.0.0.0"/><IPSubnet Address=""/></IPSubnets><Metric Value=""/><Version>7958</Version><Capabilities SchemaVersion="1.0"><Property
Name="SSLState" Value="0"/></Capabilities><ServerRemoteName>SCCM.MYDOMAIN.COM</ServerRemoteName><DPType>SERVER</DPType><Windows Trust="1"/><Locality>LOCAL</Locality></LocationRecord><LocationRecord><URL
Name="http://SCCMDMZ.MYDOMAIN.COM/SMS_DP_SMSPKG$/PRI00003" Signature="http://SCCMDMZ.MYDOMAIN.COM/SMS_DP_SMSSIG$/PRI00003"/><ADSite Name="Default-First-Site"/><IPSubnets><IPSubnet Address="172.16.10.0"/><IPSubnet
Address=""/></IPSubnets><Metric Value=""/><Version>7958</Version><Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities><ServerRemoteName>SCCMDMZ.MYDOMAIN.COM</ServerRemoteName><DPType>SERVER</DPType><Windows
Trust="1"/><Locality>FALLBACK</Locality></LocationRecord></LocationRecords></Site></Sites><ClientPackage FullPackageID="PRI00003" FullPackageVersion="1" FullPackageHash="BFC11E099E8F451107B43E0DBEFD93B01DB2D6453DA74F8A2CB94B73D676C1CD"
MinimumClientVersion="5.00.7958.1000" RandomizeMaxDays="7" ProgramEnabled="false" LastModifiedTime="30354761;897103744" SiteVersionMatch="true" SiteVersion="5.00.7958.1000" EnablePeerCache="true"/><RelatedContentIDs/></ContentLocationReply>'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Found local location 'http://SCCM.MYDOMAIN.COM/SMS_DP_SMSPKG$/PRI00003'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Found remote location 'http://SCCMDMZ.MYDOMAIN.COM/SMS_DP_SMSPKG$/PRI00003'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Discovered 1 local DP locations. ccmsetup
25-02-2014 02:20:39 PM 1480 (0x05C8)
PROPFIND 'http://SCCM.MYDOMAIN.COM/SMS_DP_SMSPKG$/PRI00003'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Using DP location http://SCCM.MYDOMAIN.COM/SMS_DP_SMSPKG$/PRI00003
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
GET 'http://SCCM.MYDOMAIN.COM/SMS_DP_SMSPKG$/PRI00003/ccmsetup.cab'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Couldn't verify 'C:\Windows\ccmsetup\ccmsetup.cab' authenticode signature. Return code 0x80096001
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Sending Fallback Status Point message to 'SCCM.MYDOMAIN.COM', STATEID='316'.
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Failed to get client version for sending messages to FSP. Error 0x8004100e
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Params to send FSP message '5.0.7958.1000 Deployment Error 0x80004005. Pre-req file name: C:\Windows\ccmsetup\ccmsetup.cab'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Request failed: 500 Internal Server Error
FSPStateMessage
25-02-2014 02:20:39 PM
1480 (0x05C8)
Failed to extract manifest cab file with error 0x80004005. Try next location.
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Enumerated all 1 local DP locations but none of them is good. Fallback to MP.
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
GET 'HTTP://SCCM.MYDOMAIN.COM/CCM_Client/ccmsetup.cab'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Couldn't verify 'C:\Windows\ccmsetup\ccmsetup.cab' authenticode signature. Return code 0x80096001
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
CcmSetup failed with error code 0x80004005
ccmsetup 25-02-2014 02:20:39 PM
284 (0x011C)
Please let me know any solution or workaround for this
Thanks Rahul$

Hi,
The client cannot verify the signature of ccmsetup.cab. I suggest you check the Trusted Root Certification Authorities in certificate store on the client to see whether a certificate is missing.
Try to enable verbose logging for SCCM client installation. Then check the log to see whether there are some useful information.(http://technet.microsoft.com/en-us/library/gg699356.aspx)
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

TS1702 ea game codes opo-up when redeeming "Before you can make purchases, you must tap Continue to sign in, then verify your payment info"

Hi there,
Not an urgent question, however I would like some help.
EA Games ran a great promotion over the holidays that offered free iphone/ipod and ipad games. I won a few but have not been able to access the games due a weird bug. Everytime I attempt to redeem the code on my iphone in the app store or via Itunes app a pop-up appears "before you can make purchases, you must tap Continue to sign in, then verify your payment info." I'd happily click the continue button if there was one. But there isn't. I click on for the pop-up to move on and I'm back at the screen that asks me to redeem. Which I do and the pop-up returns. I'm fully logged in my payment method works for other app purchases or updates but not these EA codes. Very odd.

There are user-to-user public forums, you're not talking to iTunes Support - I've asked the hosts to remove your account id and password from your post, but you should change your password IMMEDIATELY.
If you are getting a message to contact iTunes Support then you can do so via this link and ask them why the message is appearing (we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

HT204266 trying to get a free app and it keeps coming up verify your payment if i say continue its asking for the security code of my visa card is this right

Trying to get free app on iphone and it keeps coming up verify your payment if you contune its asking for security code of my visa card is this right

It is correct. Update your account settings and information. If the security code is all that is needed to verify your account, that is pretty easy to fix.

Im trying to update my apps and it wont let me. When i clicked on an app to update it or to download a free app it says "sign in required, tap continue and sign in to view your billing information" when i did it says "you must verify your payment info be

Im trying to update my apps and it wont let me. When i clicked on an app to update it or to download a free app it says "sign in required, tap continue and sign in to view your billing information" when i did it says "you must verify your payment info before you can makes purchases" then "security code is invalid" when the security code is valid. I even switched credit card it keeps saying the same thing....... THIS IS NOT FAIR........ I WANNA UPDATE MY APPS!!!!! Btw idk why did i buy the ipad for, APPLE dont even let you download ADOBE FLASH PLAYER and must of the games required ADOBE FLASH PLAYER to play example: wizard101. Idk what i was thinking...... :(

Why not simply remove yoru payment info by selecting None at top?
APPLE dont even let you download ADOBE FLASH PLAYER
Considering Adobe dont (sic) even make Flash Player for iPads, this seems about right. How can you download something that does not exist?

10.3 OS Upgrade error. An error has occurred while downloading software for your device. Please verify your internet connection or try again later

HELP ! HELP ! HELP ! "An error has occurred while downloading software for your device. Please verify your internet connection or try again later, if the problem persists." appears while attempting to upgrade or install BlackBerry Device Software. upgrading my Z10 OS to 10.3 on both (link & web). but facing same problem again and again. plz help. internet speed is 1mbps and working fine.

I suggest you try the very clean and very forceful AutoLoader method:
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
Beware that it is completely destructive...the device will be "like new"...no data, no apps, no accounts, etc. Be sure you take a full backup first, as well as make full manual documentation of all apps, accounts, configurations, etc. Sometimes a restore reintroduces the very corruption one is trying to eliminate, and manual reconfiguration is necessary.
You can also use this to fall back to a prior OS if you desire...you can install any OS level for which you can find an AutoLoader. (Hint...search over on the CB site!)
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

No requisition found; verify your entries in SRM 7.0

HI Udo,
i am using SRM 700 on level 005. I want to use a RFx-Szenario, for that i create a Purchase Requisition in ECC via ME51N, then i release it via ME54N. After that it will be send via ERPSourcingReuest Webservice, over XI to the SRM System. In the SRM System the XML Message is processed and has the status "Transfer to external status" with a green bolt icon. I don't see an error Message in tcode /SAPPO/PPO2 So this looks fine to me?
So I go into the SRM Portal Website, Purchasing --> Sourcing --> Carry Out Sourcing... there i enter my Purchase Requisition Number, which i have in the ECC into the Field "External Requirement", then i press "Search" and get the Warning Message
"No requisition found; verify your entries". No Purchase Requisitions are displayed - it is also nothing disblayed when i enter * or leaving everything blank.
What am i doing wrong, what is missing? Where can i see maybe further errors, if there is no message in /SAPPO/PPO2? In which tables should the data be written out of the XML Message?
Thank you in Advance for your help
Best Regards
Udo

Hi all,
the problem was that the relation between plant and product was somehow mixed up. We created it new and now we can process the mesasges.
But i have one more questions, which Monitoring Transactions i have for SRM (Abap/Portal)? When I was in Debug Mode i saw error Messages like:
A     /SAPSRM/CH_SOA_MSG     84     Purchasing group for follow-on document missing
A     BBP_PD     245     Purchasing group for follow-on document missing
A     BBP_PD     246     Purchasing organization for follow-on document missing
A     BBP_PD     249     Document type for determined backend system missing
E     BBP_PC     13     No default value is defined
E     BBP_PC     22     No tax data maintained
E     BBP_PD     276     Back-end data could not be read
E     BBP_PD     358     Select a location that is assigned to the plant chosen
E     BBP_TAX     1     Tax code could not be determined
E     BBP_TAX     13     Not possible to calculate tax
But i only saw that in the monitoring? These Errors can happy every time and i need to see them.... can you please tell me, where i can have a look?

I can't use Photobooth - when I open the app, I get the message: "Photo Booth couldn't save your photos - Photo Both encountered an error when trying to save your photos. You photos cannot be saved at this time."

I can't use Photobooth - when I open the app, I get the message: "Photo Booth couldn't save your photos - Photo Both encountered an error when trying to save your photos. You photos cannot be saved at this time."
i tried adding user macintosh hd/users/your_user/pictures/"photo booth" but still photo booth is not working and even images in photo booth cant be deleted they keep coming back

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box markedAllow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

SAMLUtils.checkSignatureValid: Couldn't verify signature.

Hi,
When i try to the SAML post. I receive the below error message.
</ds:Signature><samlp:Status><samlp:StatusCode Value="samlp:Success"/></samlp:Status><saml:Assertion xmlns:saml="urn:oasis:names:tc:SAML:1.0:assertion" AssertionID="_2a1708489b7c0a59481ab12aaf855362" IssueInstant="2012-03-27T18:21:36Z" Issuer="econnectng07.test.com:443" MajorVersion="1" MinorVersion="1"><saml:Conditions NotBefore="2012-03-27T18:21:36Z" NotOnOrAfter="2012-03-27T18:26:36Z"/><saml:AuthenticationStatement AuthenticationInstant="2012-03-27T18:21:02Z" AuthenticationMethod="urn:oasis:names:tc:SAML:1.0:am:HardwareToken"><saml:Subject><saml:NameIdentifier Format="urn:oasis:names:tc:SAML:1.1:nameid-format:X509SubjectName">uid=test,ou=People,ou=AMIND,dc=amat,dc=com </saml:NameIdentifier><saml:SubjectConfirmation><saml:ConfirmationMethod>urn:oasis:names:tc:SAML:1.0:cm:bearer</saml:ConfirmationMethod></saml:SubjectConfirmation></saml:Subject><saml:SubjectLocality IPAddress="10.208.155.122"/></saml:AuthenticationStatement></saml:Assertion></samlp:Response>
libSAML:03/27/2012 11:21:37:067 AM PDT: Thread[service-j2ee-103,5,main]
getWSSTTokenProfilePublicKey: entering
libSAML:03/27/2012 11:21:37:067 AM PDT: Thread[service-j2ee-103,5,main]
Could not find a KeyInfo, try to use certAlias
libSAML:03/27/2012 11:21:37:068 AM PDT: Thread[service-j2ee-103,5,main]
SAMLUtils.checkSignatureValid: Couldn't verify signature.
libSAML:03/27/2012 11:21:37:068 AM PDT: Thread[service-j2ee-103,5,main]
verifyResponse: Response's signature is invalid.
libSAML:03/27/2012 11:21:37:069 AM PDT: Thread[service-j2ee-103,5,main]
SAMLUtils.sendError: error page/saml2/jsp/saml2error.jsp
libSAML2:03/27/2012 11:21:41:021 AM PDT: Thread[SystemTimerPool,5,main]
CacheCleanUpRunnable.run:
This is SAML 1 post and i have the client certificate imported in my saml keystore also. Appreciate your help.
libSAML:03/27/2012 11:22:34:002 AM PDT: Thread[SystemTimerPool,5,main]
Clean up runnable wakes up..
libSAML:03/27/2012 11:22:34:002 AM PDT: Thread[SystemTimerPool,5,main]
AssertionManager::CleanUpThread::number of assertions in IdEntryMap:0
[root@dca-ldap-stg1 debug]# pwd

You've cut-off the digital signature from the SAML response in your posting, and haven't provided any information about the digital certificate in your keystore. How can one respond to your problem?
Is the client certificate in your keystore responsible for signing the SAML assertion? If not, do you have the SAML service's digital certificate accessible to your verifier program in your keystore? If not, you need to import the signer's digital certificate into your keystore, verify that it is there, and then run your program again.
Arshad Noor
StrongAuth, Inc.

VERIFY your library prior to update: iPhoto Library Manager

I am a believer. Please, verify your iPhoto library prior to updating. In fact, verify it every few months. I did this with my iPhoto 5 Libraries prior to updating and I'm so happy I'm buying a SECOND license to IPLM just to say thanks. [1]
How do you verify? You register iPhoto Library Manager ($20) and you use it to verify your library.
But, you say, IPLM is just used to manage multiple libraries. There are free apps to do that, iPhoto 6 can handle 250,000 images (given enough machine power), iP6 can option-click load separate Libraries anyway.
All right. Except IPLM is the most perversely unmarketed software in existence. The library manager features are free. They are nice, but not essential.
What you get for $20 is the barely mentioned capability to combine (merge, import) Libraries or portions of Libraries (images and albums) with much of the metadata preserved (titles, comments, keywords(!), ratings, roll data, and album membership).
But, you say, I don't need to merge Libraries. I have one Library, my partner(s) and children use the one Library, I don't have a desktop/laptop Library. Ahh, but you do need to verify.
How do you verify? You tell IPLM to create a new Library and import all the images from your existing Library. You won't KEEP the new Library. You do this to test for problems.
If there are no error messages, no glitches, matching image counts, etc -- you're fine. Otherwise, sort this out BEFORE you update.
I have done this with two libraries of about 3000 images each. In each case IPLM/iPhoto identified ONE corrupted JPEG [2]. I was able to restore from old CD archives.
Now I feel confident in the integrity of my iPhoto Libraries. I will be using IPLM to verify them every few months from now on.
Highly recommended. And no, I'm not associated with them in any way.
[1] In my case I have 3 iP5 Libraries and I want ONE iP6 Library on my iMac -- I decided to do the merge prior to going to iP 6 because IPLM has been used for over a year for iP 5 merges, so it's more tested that way.
[2] What happens is iPhoto reports it couldn't import an image. On examination in an image editor the JPEG is corrupted. When I went to backups and the original Library I confirmed the corruption. Don't try to open these images in iP 5 -- they will cause iP 5 to hang with a spinning pizza of death. Yes, that's very bad programming. Preview manages them properly. In both cases I was able to get an original good image from old CDs and archives -- but I backup more than 99% of the world. I think these images were corrupted by older/flakier versions of OS X and iPhoto. I have a personal evidence-free belief that the pre-journaled OS X file system was not reliable.
G5 iMac 20 Mac OS X (10.4.4) G3 iBook

Oops. Well, I still think IPLM is a very good way to test for Library problems, but I would strenously warn against using it to merge iPhoto 5 Libraries prior to running iPhoto 6.
For more details see my blog:
http://googlefaughnan.blogspot.com/2006/02/iphoto-6-what-bloody-mess.html
The only safe way to merge iPhoto Libraries appears to be to buy Aperture.

What do these SSL error messages mean? How do I fix this problem? (SSL_ERROR_CERTIFICATE_UNKNOWN_ALERT) & (SSL_ERROR_BAD_CERT_ALERT - SSL client cannot verify your certificate.)

In my error log files for iPlanet Web server 4.1SP9 (running on Solaris) I am seeing the following errors sporadically dispersed seemingly at random throughout the day.
Error receiving connection (SSL_ERROR_CERTIFICATE_UNKNOWN_ALERT)
Error receiving connection (SSL_ERROR_BAD_CERT_ALERT - SSL client cannot verify your certificate.)
Error receiving connection (Not connected)

Hi,
Are you trying to install a certificate in iWS.
When did you get this error messages ?
For more infomartion about error codes. Please look the below link.
http://www.mozilla.org/projects/ security/pki/nss/ref/ssl/sslerr.html
http://knowledgebase.iplanet.com/ikb/kb/ articles/4811.html
Regards,
Dakshin.
Developer Technical Support
Sun Microsystems
http://www.sun.com/developers/support.

I can't access my cell to verify a code for iCloud keychain?.... What do I do to get keychain going!!!!!

I can't access my cell to verify a code for iCloud keychain?.... What do I do to get keychain going!!!!!

Hi freddyg5316,
Sorry to hear you are having issues with this. If you are having troubles receiving the verification code via SMS when setting up iCloud Keychain, you may find the information and steps outlined in the following article helpful, in particular this portion:
If you didn't receive the verification code via SMS
Make sure that you have a strong cellular network connection on your phone.
Make sure that your phone number can get SMS messages. To check, ask someone to send you a text message.
Make sure that the correct phone number is associated with your account:
On your iPhone, iPad, or iPod touch, tap Settings > iCloud > Keychain > Advanced. (In iOS 7, tap Settings > iCloud > Account > Keychain.) Make sure the phone number under Verification Number is correct. If not, enter another phone number.
On your Mac, choose Apple menu > System Preferences. Click iCloud, then click Options next to Keychain. (In OS X Mavericks or earlier, click iCloud, then click Account Details.) Make sure the phone number under Verification number is correct. If not, enter another phone number.
If you can't access a device that has iCloud Keychain enabled, contact Apple Support and verify your identity to get help setting up iCloud Keychain.
Get help using iCloud Keychain - Apple Support
Regards,
- Brenden

COULDN'T VERIFY YOUR CODE!!

Similar Messages

Maybe you are looking for