Couldnot generate NON_ABAP EWA report
Hello Experts,
I couldnot generate EWA report for NON_ABA Ewa..
I have setup the disgnostics configuration..
Solman and Satellite connection established. smg agent and Introscope agent connected to solman and both of them running.
I couldnot get the EWA report in Operations -> Solution Reporting ->
Services -> Activities -> Schedule Reporting.
When I schedule the Job and execute the Job it says like "No data for
reporting available"
Please find the below Job(SM_REP:000000000100100_0378_01_) log details.
04.12.2008 10:41:36 Job started
04.12.2008 10:41:36 Step 001 started (program RDSWP_REP_SERVICES,
variant , user ID <XXXXXXXXXXX>
04.12.2008 10:41:36 No data for reporting available!
04.12.2008 10:41:36 Job finished
PLease let me know how to get/Generate the Non_abap Ewa report. ?.and is there
any note or document ?..
Thanks
Thirumal
Hi,
You can use document attached in SAP Note 976054.
Regards,
Stephan
Similar Messages
-
EWA report for non-abap systems
Hi Gurus,
Good day.
I would like to ask, what are the steps that I'm going to do when configuring an EWA report for non-abap systems i.e portal. Do Ineed to install SMD agents on my non-abap systems and connect to diagnostic agent of solman?
Or do I need to install wily introscope agents on my non-abap systems and connect to diagnostic agent?
It is both? Which one?
It would be also great if you can provide me links/documents in relation to my queries.
Please do note that the current version of solman system is 7.1
Thanks in advance for the help
VirgilioHi Virgilio,
To generate an EWA report for Java stack system,
you need to do following:
1. install smd agent (diagnostics agent) on Java stack system
you can install this agent standalone, details see note 1234384.
The installation Guide is also attached in note 1234384.
2. finish Initial Config and Basic Configuration in solman_setup for
solman system, the setting about Enterprise Manager is also included
in these configurations, please ensure EM is running properly.
3. start managed system configuration for the EP system in solman_setup
after selecting the system type 'Java', please finish all steps as
suggested in which step. The Step 'Wily Introscope Configuration' is to
install Introscope Agent which is used for Java stack system. More infor
please read the installation Guide of Enterprise Manager and note
797147.
4. You should be able to see data in Wily Introscope and Workload
analysis via
Root Cause Analysis->End-to-End Analysis->select the system->Workload
Analysis
5. If the EP system is added in a solution, the EWA task for this system
should be shown up in solman's SDCCN.
Also check note: 976054"
Thanks
Regards,
Vikram -
Hi All,
As per EWA report we have upgraed our oracle version 11.2.0.2 to the latest oracle SBP and has done all the steps as given in the readme document which is from market place.
After that we have generated the EWA report but still for the database performance point it gives below recommendation.
But still, in the EWA report we are getting below recommendation.
13.4 Oracle Release
Release Recommendation
11.2.0 We recommend that you install the latest Oracle patch set as
soon as possible (refer to SAP Note 415900). Check SAP Note 1431799
regularly for the latest patch set for Oracle 11.2.0.
Note that in addition to the patch set, further bug fixes may be
available and recommended. Refer to the following SAP Notes:
Patch set SAP Note number Description
11.2.0.2 1503709 Oracle 11.2.0: Patches / Patch collections for
11.2.0.2
Our concern is why after applying the latest SBP on oracle 11.2.0.2 still we are receving the same message.
It this only for information?
Can somebody help to understand.
Regards
DeepakHello,
If you are back on ST-SER 701_2010_1 SP05, you need to ensure that the Service Content is up todate.
Check in AGS_UPDATE. If there are any updates to be downloaded or Activated, please do so.
BEfore you replace the sevice defintions, check if there have bene any issues witht he refresh defintion task...you can see this int he maintenace package SDCCN task on the managed system. If it is not encountering errors and is running, then the system should have good curent defintions. But if there have been problems with the tasks at all it may be worthwhile.
Regards,
Paul -
EWA report: didnt send to SAP!!! Help Please
Hi experts,
All of my servers generated EWA reports, but it did not sent to SAP. I have the checked mark to send to SAP.... It was working fine. one of my team members, he deleted all the jobs and scheduled em again.... which perticular job do I need to schedule to send to SAP? I thought this is the job that needs be schedulled >>> "SEND_SYSTEM_RELATIONSHIP_TO_SUPP". this job is working fine. Other than that, I dont understand why it didnt send to SAP?
Please help.
Thanks in advanced!!
I will post points for sure!!Hi Afi,
Kindly note the sequence of steps to be done for EWA generation.
1. Setup of the Server, database and system in transaction SMSY.
2. Generating the RFC's for the System and ensuring that the trusted
RFC works.
3. Adding the system to a logical component and assigning the logical
component to a Solution Landscape created in DSWP.
3. Setting up of EWA from the Solution Settings from the operations
setup in DSWP.
4. Configuring the SDCC / SDCCN on the satellite system (see note Note 763561 ) and adding the Solution Manager RFC to the SDCC settings.
5. Refreshing of sessions via the SDCCN transaction on the Satellite
system. This can be automated via the Auto session Manager Report.
6. Processing of the session and sending the collected data to Solution
manager.
7. Processing the collected data in the Solution Manager System and
generating the EWA Report.
if helpful reward points are appreciated -
EWA reports not generated from Solman
Hi All,
EWA reports are not been generated from Solution manager system.
Earlier they were working fine. But now it is not. We need to troubleshoot it.
Kindly suggest some healthy steps so that this could be started again.
Regards,
Sujit TakaleHi man you dont gave to us a lot of informations, they are tons of reasons ... If RFC connection are generated correctly, make sure your followed the tree setps using the transaction ags_update.
Just double check that to see and provide to us more informations like error logs or something else
regards -
Grey (blank) EWA reports generated for Portal systems
I am attempting to set up EWA reports for J2EE systems. At this stage despite all efforts I continue to get grey rated (blank) reports generated for our Portal systems.
As far as I can tell all required components are installed correctly (Wily, SMD server, SMD agents etc).
This problem seems to be restricted to our Portal systems as report data is being generated for our XI J2EE engines with the same SMD components installed.
CGA collection jobs are running successfully against the managed Portal systems, and I have attempted to manually generate reports via transaction DSA in the Solution Manager system, using an uploaded service data xml file generated with the SMD/services utility. This also results in a blank report.
Our systems comprise the following components:
Wily v7.1
SMD 13 on Solution Manager and managed systems
Solution Manager 4.0 SP13: (ABAP):
SAP_ABA 700 0013 SAPKA70013
SAP_BASIS 700 0013 SAPKB70013
ST-PI 2005_1_700 0006 SAPKITLQI6
PI_BASIS 2005_1_700 0013 SAPKIPYJ7D
SAP_BW 700 0015 SAPKW70015
SAP_AP 700 0009 SAPKNA7009
BBPCRM 500 0009 SAPKU50009
CPRXRPM 400 0010 SAPK-40010INCPRXRPM
ST 400 0013 SAPKITL423
BI_CONT 703 0008 SAPKIBIIP8
ST-A/PI 01K_CRM560 0000 -
ST-ICO 150_700 0011 SAPK-1507BINSTPL
ST-SER 700_2006_2 0004 SAPKITLOK4
Solution Manager (J2EE):
sap.com SAP_JTECHF 7.00 SP13 (1000.7.00.13.0.20070812015644)
sap.com ISAGENT 7.00 SP13 (1000.7.00.14.0.20070927052333)
sap.com SAP-JEE 7.00 SP13 (1000.7.00.13.0.20070812015311)
sap.com SAP-JEECOR 7.00 SP13 (1000.7.00.13.0.20070907082334)
sap.com BASETABLES 7.00 SP13 (1000.7.00.13.0.20070812013638)
sap.com CORE-TOOLS 7.00 SP13 (1000.7.00.13.0.20070812014121)
sap.com JLOGVIEW 7.00 SP13 (1000.7.00.13.0.20070812001600)
sap.com JSPM 7.00 SP13 (1000.7.00.13.0.20070812001700)
sap.com CAF 7.00 SP13 (1000.7.00.13.0.20070809092315)
sap.com UMEADMIN 7.00 SP13 (1000.7.00.13.0.20070809093947)
sap.com ADSSAP 7.00 SP13 (1000.7.00.13.0.20070812011854)
sap.com BI_MMR 7.00 SP13 (1000.7.00.13.0.20070812013749)
sap.com CAF-UM 7.00 SP13 (1000.7.00.13.0.20070809092324)
sap.com KM-KW_JIKS 7.00 SP13 (1000.7.00.13.0.20070812014519)
sap.com SAP_JTECHS 7.00 SP13 (1000.7.00.13.0.20070812015951)
sap.com BI_UDI 7.00 SP13 (1000.7.00.13.0.20070811190400)
sap.com LM-SERVICE 7.00 SP13 (1000.7.00.13.0.20070812001200)
sap.com LM-TOOLS 7.00 SP13 (1000.7.00.13.0.20070906104634)
Among many, many others, the following notes and documentation has been followed:
976054 Availability of EWA for Non ABAP components
1010428 End-to-End Diagnostics
762969 - Grey rating for Earywatch Report
EWA guide for NON-ABAB components
SAP Solution Manager 4.0 End-to-End Root Cause Analysis Installation Guide
762969 - Grey rating for Earywatch Report
And of course all the Wily & SMD installation guides.
Please let me know if there is any other information required. I'm posting this in the hopes that someone else has had this problem and has been able to resolve it. I have read though what seems like hundreds of threads on SMD setup problems, however not many that describe the problem I'm having exactly.
Many thanks in advace.
TimHi Stephan,
You're on the right track! When I try manually generate reports for our XI systems via uploaded service data, I only get valid report data if I generate report with graphics - otherwise the report is blank.
Alas with the Portal systems, I get no report data either way.
The XML storage table does contain data (with XI & Portal systems) - so comms with the J2EE is working.
Thanks for your help.
Tim -
Hi,
In my solution manager EWA reporting generating twice for all systems ( 3 times for few systems) and also scheduled twice (3 times for few system ) for next week.
Request you to help me on this issue.
Thanks for you valuable help and support
Thanks & Regards
ReddyHello,
There should be two periodic tasks scheduled in SDCCN on managed ABAP systems.
Service Preparation and Maintenance Package Task. That is all that should be scheduled.
If you see any "refresh session" or "Earlywatch Alert for Solution Manager" sessiosn scheduled as a periodic tasks, they should be removed from the todo tab, as you can get an EWA for each one.
Most often duplicate EWA reports are caused by misconfiguration ij SDCCN on DSWP where indeed more than one EWA is being created due to the setup.
I would best guess you have incorrect SDCCN tasks scheduled as periodic tasks, when they should be driven by the Maintenance Package task as designed.
Check the periodic tasks in SDCN....typically you only should have the Service Preparation and Maintenance Package.
No other tasks should be scheduled as periodic tasks. While thre are other SDCCN tasks that get run when you deliver a service or perform certain analysis, they are not periodic tasks. I
The other exceptions is when the EWA is being processed at SAP and not on Solution Manager, then there would be an EWA tasks sheduled as a periodic task with the RFC destination SDCC_OSS (SAP)
Regards,
Paul -
EWA report from SOLMAN not generating properly.
Hi expert,
EWA report from SOLMAN not generating properly. It's generating like Rating not Determined (Gray) - SAP EarlyWatch Alert.
Solman version: SAP EHP 1 for SAP Solution Manager 7.0
Thanks in advance. Any help appreciated.
Regards,
Debi palHi,
Refer to SAP note: Note 762696 - Grey rating for Earlywatch Alert
Thanks
Anil -
SYNTAX_ERROR when generating EWA report
Dear Expert,
I have problem with solman system when generating EWA report, the error occurred after upgrading SP, the current status is SAPKB70013, SAPKA70013, SAPKW70015, SAPKNA7011, SAPKITLQI4, 700_2007_1 0000. We cannot continue to SAPKB70014 since the kernel level is too low.
The error is:
SYNTAX_ERROR
Short text
Syntax error in program "RDSVASAHW_CAPACITY_________013 ".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "RDSVASAHW_CAPACITY_________013
" in include "RDSVASAHW_CAPACITY_________013 " in
line 5730:
"The field "ET_OSCOLLINFO000099" is unknown, but there is a field with "
"the similar name "ET_OSCOLLINFO000098". "ET_OSCOLLINFO000098"."
Error analysis
The following syntax error was found in the program
RDSVASAHW_CAPACITY_________013 :
"The field "ET_OSCOLLINFO000099" is unknown, but there is a field with "
"the similar name "ET_OSCOLLINFO000098". "ET_OSCOLLINFO000098"."
Please assist me to fix the problem since the report is urgently required by our Management.
Thanks in advance.
Warm Regards,
RudiHi Rudi,
I've deleted and replaced the service definitions many times without problems. Essentially it's just deleting lots of table entries and replacing them again. It's not changing coding or reports. I'm not aware that the service definitions are deleted and replaced by any support package. You might consider updating to SP 8 for ST-PI 2005_1, since the mechnism for deleting and replacing the service definitions is made easier as of that support package. (It can then be done from within SDCCN.)
best regards,
-David. -
Short dump when running EWA report
Dear Expert,
I got error dump when generating EWA report: OBJECTS_OBJREF_NOT_ASSIGNED_NO
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_GUI_GP=====================CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in
procedure "IF_GRAPHIC_PROXY~EXPORT" "(METHOD)", nor was it propagated by a
RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component.
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.
Missing RAISING Clause in Interface
Program CL_GUI_GP=====================CP
Include CL_GUI_GP=====================CM017
Row 1
Module type (METHOD)
Module Name IF_GRAPHIC_PROXY~EXPORT
Trigger Location of Exception
Program CL_GUI_GP=====================CP
Include CL_GUI_GP=====================CM017
Row 19
Module type (METHOD)
Module Name IF_GRAPHIC_PROXY~EXPORT
Please advise asap since we need the report immediately.
Thank you in advance,
RudiHi,
[This note|https://websmp109.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=944541&_NLANG=E] will solve your problem.
feel free to revert back.
--Ragu -
EWA reports for non abap systems
Hello gurus,
I am facing a problem with configuration of EWA reports for SAP NW Portal.
I have already configured EWA for abap systems, and those are running good on weekly basis. but i have problem with configuration of reports for java systems.
So far, i have installed an SMD agent and CA on my EP-satellite system. I have also configured and SMD server on my Sollution Manager and registered the SMD agent on SMD server and installed Willy Introscope on SMD server.
I am using a central SLD which is running on different host as Solution Manager. I did all the configuration (smsy_setup, configuration of sld_data_supplier etc... )
I have also created the system in SMSY, matched the smsy with SLD (data source SLd)and assigned Logical component to java system.
>>> But when i want do define data collection in the SMD for Gargage Collection (task in scheduler) i cannot see host of my portal system in the SMD.
In the SMD i can see just the abap systems for which the EWA are being already generated.
(i have done also configuration>>connecting managed sytem to the SMD, but i still cannot connect my Portal system to SMD)
Do you have any idea, what i have done wrong?
My solution manager is running on Sap NW 7.0, SPS16,
Sattelite system , EP SPS 19
Thank you very much for your points!!Hello Jagan,
I was following the enclosed guide from the note: 976054, but it doesn't help to solve my issue.
And when i want to permorm the setup for the managed systems,(http://<host><port>/smd -> diagnostic setup->managed systems ->setup wizard) i can not see there my Portal systems, just the abap systems.
Do you have any idea?
Thanks,
Best regards
Slavomir -
EWA Report with yellow rating and NO data
Hi,
We have upgraded the solution manager to EHP1 in June. Befor that my EWA was working perfectly fine.
Our EWA report (after upgrade) is getting generated and has a rating yellow but it contains No data.......shows data oly for hardware capacity even no other performance factors included in the report.
I checked settings in satellite system as well as in solution manager. everthing is working fine. All RFCs, service defination, word setting everthing is fine.
I need your assistance to resolve this issue o priority as its EWA for PRD isnt getting generated.
Thanks,
SAP Basismy ewa contains:-
1.2 J2EE Configuration Data
1.2.1 Support Package Maintenance
No configuration data was found.
Recommendation:
Check whether data is displayed for this system in application 'Change Reporting', which can be found in the 'Root Cause Analysis' work center under 'System Analysis'.
The requirements for 'Change reporting' are:
- Setup of Diagnostics
- Setup wizard for this system has been executed successfully
- Periodic extractors are running successfully
For more information, see http://service.sap.com/diagnostics.
2 Java Performance Data PI1
2.1 Java Application Performance
No performance data was found.
Recommendation:
Check whether data is displayed for this system in application 'Workload Analysis', which can be found in the 'Root Cause Analysis' work center under 'End To End Analysis'. If the data is not available here, open a message on component SV-SMG-DIA.
If data can be displayed in the Workload Analysis but is missing here, open a message on SV-SMG-SER.
The requirements for the 'Workload Analysis' are:
- Setup of Diagnostics including BI
- Setup wizard for this system has been executed successfully
- Agents have been set up and are running
- Periodic extractors are running successfully
For more information, see http://service.sap.com/diagnostics.
please suggest -
EWA Report as Word Attachment to email address
hi
Currently I have html format of EWA report automatically sent to Basis Team email id .
How do I get EWA report file as MSWORD Attachment in email.
Yes. I can see that in Solman System , MSword file is generated ., But emailed only HTML version.
Hope you got my Point .Mahesh Gangula wrote:
Thanks for all your replies .
>
> SAP Already confirms that , Thats not possible.
>
> My Client Manager Asking , why EWA comes are In-place(email body) HTML .
>
> Can we make it asd HTML Attachment as email delivery ?
Hello Mahesh
The main technical difficulty is the fact that many a email servers reject HTML content as a attachment. Plus the fact that the EWA report uses IGS services if opened as a HTML page will fail all the time since the email is not connected to the IGS server of the Solution Manager.
Hence a mail body is created instead of a attachment.
I hope that you now understand the technicality of the issue.
Regards
Amit -
Dear All,
i have configure for EWA report but the report still not give reported for each satellite system in Solman. one week ago we receive msg from SAP that give us Red Alert for our Production systems, this mean that solution manager for EWA is working. but the problem is the report cannot load the EWA report for every systems in Solman. anyone can help me please...
Thanksmake sure you configured your satellite system properly in SMSY and the RFC are working, also the BACK RFC from satellite system to SolMan.
Goto SDCCN in your satellite system and make sure that a EarlyWatch is scheduled which sends data to your SolMan SID (not OSS!!). This can only be achieved by having a "Request Session Data" Report which has a 10* session and not a Z* session.
If this is not the case :
1) delete your EarlyWatch Schedule in Satellite system via SDCCN
2) unschedule your task processer
3) make sure the installation number in SMSY (SolMan) is correct - same like in satellite system
4) recreate via "Maintain service definitions" your SDCC_OSS connection
5) reschedule the task processer job.
6) recreate a new EarlyWatch Alert for Solution Manager which sends data to your SolMan.
If you have defined your SolMan as the Master for SDCCN (done via SMSY / Menue: Environment / Solution Manager Operation / Administer SDCCN) you just have to schedule "EarlyWatch" instead of 6., this should automatically generate "EarlyWatch Alert for Solution Manager "
HTH
Nesimi -
How to generate "Early watch report uisng sdccn"
Hi Guys,
Can any body please provide me brief knowledge on " how to generate an Early Watch Report using SDCCN"
infact i have searched in the forums but not very much clear.
Thanks,
LAXHi,
can you look at this
[EWA|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=%2flibrary%2fnetweaver%2fs-u%2fsolutionManager4.0-HowtogenerateEWA%E2%80%99sFromSatelliteSystems.pdf]
[http://sapnetweavernotes.blogspot.com/2008/04/sap-earlywatch-alert.html]
[https://service.sap.com/earlywatch]
For taking EWA report through solution manager, you have to perform satelite system configuration. Please check the below link which have tutor files, related step by step documents for EWA.
[http://www.service.sap.com/rkt-solman]--> select ur component version --> <Technology Cons. & System Admin.> select EWA
763561 -- More information about SDCCN can be obtained here.
91488 --- SAP Support Services- Central preparatory note.
Regards,
Muralidhar
Maybe you are looking for
-
Dear All, Presently In payroll system income tax calculation is based on allowance paid basis. but our client is required that is projected bais. for example presently if am paying bonus through info type 15 rs 100,000 then system is deducting tax fr
-
Upgrading one of two hard drives
I've got a G5 dual 2.0Ghz with two internal hard drives: a 300Gb that's my boot drive, and a 500Gb that's a data/backup drive. The 300Gb boot drive is nearly full, so I'm planning on replacing it with a larger (750Gb) drive. What's the best way to do
-
Error when Connect to Access 2007 with password using OLEDB
Hi there, I am seeing the below error when trying to Connect to Access 2007 with password using Crystal XI or Crystal 2008, when using the OLEDB to connection Access data. Logon failed Details: DAO Error Code: 0xd0f Source: DAO.Workspace Description:
-
How to convert date value(format) in Calendar(input controls)
Hi everyone I am using webi 4.0 My problem is when i select calendar date(input Controls) i am able to display time stamp along with date in input Controls(MM/dd/yyyy 12:00:00 AM) i want to change (MM/dd/yyyy 12:00:00 AM) to (yyyy-MM-dd ), when i sel
-
Discoverer Viewer sporatically not working
Discoverer Version: 10g Browser: IE 6.0.2900.2180 I have an instance where Discoverer Viewer will work on one persons machine and not another's. We are both using the same Discoverer Viewer and the same browser. By not working, I mean that when I run