COUNT of orders in Report output
Hi All,
I want to display number of orders that are displayed in report.
What formula should i create?
I just have order number in my Rows and an amount key figure in Columns. I'm using BW 3.5.
Any help is appriciated.
Thanks!!
HI,
I supposse what you require is a counter along your column..
For that create a new CKF and in the formula part asign it the value "1".
In the calculations tab of the CKF check the box nxt to "cumulated"and also " also apply to results" ie, if you require to treat ur result row ,as anothr row,els dont check that box.
In the following drop down select "calculate along rows"
Save the query and your counter is set along the rows.
Regards,
Savitha
Similar Messages
-
Change order of key figure is not working in Web report output (using WAD)
Hi,
We are using BI 7.0, release 701 and level 008. We are facing problem in WAD (web report output). When ever we do 'Select filter' for key figures and 'change the order' of key figures, it does not get reflected in new order. Though drag and drop of key figures is working.
Though same change order is working fine in Bex Analyser.
Kindly suggest some inputs.
Thanks.Hi,
On Which Service Pack are you on?WAD has this feature of re arranging the keyfigures in BI 7.0 for SPS 14...
Regards,
Bhagyarekha. -
Count PM Orders for monthly report
Hi all
Is there any option or standard report to show the number of closed PM Orders (Work Orders) for a monthly period, equally count PM Orders raised and Outstanding for a month period ??
Any assistance is most welcome
JohnHi
Yeah, I've been manually counting them so far, but was hoping there may have been some sort of report that would give an actual figure -
Sending report output via E-mail (excel pivoted format)
Hi all,
i have a written a report where i need to send the report output to somebody via
E-mail.i am sending this report output via E-mail successfully.The receiver receives, my output in excel format.but this excel is not <b>pivoted</b>.
i want , the receiver should get my output in pivoted excel format.i.e my output data should be exactly fit in the excel sheet.
now the columns in excel sheet are overlapping.once i double clicked, the columns are getting separated.i do not want to double click.i want all the columns should come properly i.e excel field length should be adjusted as per the output field length.
i am giving my coding below.plz suggest how i can do the above thing .it's urgent.
any idea will be highly appreaciated.
Regards
if not p_email1 is initial.
perform fill_report_csv.
perform f_send_internet_mail.
endif.
FORM fill_report_csv.
data : l_text(232) type c,
v_matnr1(21) type c,
v_matnr(21) type c,
v_matkl(14) type c,
v_maktx(45) type c,
v_ttlstk(14) type c,
v_verpr(14) type c,
v_werks(14) type c,
v_lgort(14) type c,
v_char(10) type c,
v_stks type p ,
v_po(40) type c,
v_qty(13) type c,
v_qty1 type sy-datum,
v_date(15) type c,
v_date1(15) TYPE C,
v_name(35) type c,
v_eknam(18) type c,
v_lifnr(15) type c,
l_po(40) type c,
v_matnr(20) type c,
l_rate(11) type p decimals 5,
l_flag type c.
concatenate c_equal c_colon 'PO no.' c_colon
into v_po.
concatenate c_equal c_colon 'Material no.' c_colon
into v_matnr.
concatenate c_equal c_colon 'Description.' c_colon
into v_maktx.
concatenate c_equal c_colon 'Due Qty.' c_colon
into v_qty.
concatenate c_equal c_colon 'Del Date.' c_colon
into v_date.
concatenate c_equal c_colon 'Vendor.' c_colon
into v_name.
concatenate c_equal c_colon 'Buyer.' c_colon
into v_eknam.
concatenate c_equal c_colon 'Vendor Code.' c_colon
into v_lifnr.
concatenate
v_po v_matnr v_maktx v_qty
v_date v_name v_eknam v_lifnr
into i_download
SEPARATED BY con_tab.
append i_download .
clear : v_po,v_matnr, v_maktx, v_qty, v_date, v_name, v_eknam,v_lifnr .
clear wa_output.
loop at i_output into wa_output.
on change of wa_output-ebeln.
clear v_lines.
loop at i_eket into wa_eket
where ebeln = wa_output-ebeln.
v_lines = v_lines + 1.
clear wa_eket.
endloop.
**-- Checking of page break
v_lines = sy-linno + v_lines .
if 55 < v_lines .
write:/0(161) sy-uline.
new-page.
endif.
clear v_lines.
loop at i_eket into wa_eket
where ebeln = wa_output-ebeln.
v_lines = v_lines + 1.
clear wa_eket.
endloop.
*-- Calculating the due qty.
wa_output-dumng = wa_output-menge - wa_output-wemng.
*-- Writing the Line items of the PO.
read table i_ekpo into wa_ekpo
with key ebeln = wa_output-ebeln
ebelp = wa_output-ebelp.
l_rate = wa_ekpo-netpr / wa_ekpo-peinh.
*-- Writing of PO detail
if wa_output-dumng gt 0 .
v_qty = wa_output-dumng.
v_date1 = wa_output-eindt.
v_maktx = wa_output-maktx.
if wa_output-maktx+0(1) = '"' .
concatenate c_equal wa_output-maktx
into v_maktx .
else .
concatenate c_equal c_colon wa_output-maktx c_colon
into v_maktx .
endif .
if wa_output-name1+0(1) = '"' .
concatenate c_equal wa_output-name1
into v_name .
else .
concatenate c_equal c_colon wa_output-name1 c_colon
into v_name .
endif .
v_name = wa_output-name1.
v_lifnr = wa_output-lifnr.
write wa_output-eindt to v_date1 DD/MM/YYYY.
concatenate '="' wa_output-ebeln '/'
wa_output-ebelp '"' into v_po .
concatenate '="' wa_output-matnr '"' into v_matnr .
concatenate c_equal c_colon wa_output-maktx c_colon
into v_maktx .
concatenate c_equal c_colon wa_output-dumng c_colon
into v_qty1 .
concatenate c_equal c_colon wa_output-eindt c_colon
into v_date1 .
concatenate c_equal c_colon wa_output-name1 c_colon
into v_name .
concatenate c_equal c_colon wa_output-eknam c_colon
into v_eknam .
concatenate c_equal c_colon wa_output-lifnr c_colon
into v_lifnr .
concatenate c_equal c_colon wa_mard-werks '/'
wa_mard-lgort c_colon
into v_lgort .
concatenate '="' wa_output-lifnr '"' into v_lifnr .
condense:v_po,v_matnr, v_maktx, v_qty, v_date, v_name, v_eknam,v_lifnr .
concatenate
v_po v_matnr v_maktx v_qty
v_date1 v_name v_eknam v_lifnr
into i_download
SEPARATED BY con_tab.
concatenate con_cret i_download INTO i_download .
append i_download .
endif.
clear : v_po,v_matnr, v_maktx, v_qty, v_date, v_name, v_eknam,v_lifnr .
endloop.
ENDFORM. " fill_report_csv
*& Form f_send_internet_mail
text
--> p1 text
<-- p2 text
FORM f_send_internet_mail.
Variables
data: it_packing_list like sopcklsti1 occurs 0 with header line,
it_contents like solisti1 occurs 0 with header line,
it_receivers like somlreci1 occurs 0 with header line,
it_attachment like solisti1 occurs 0 with header line,
gd_cnt type i,
gd_sent_all(1) type c,
gd_doc_data like sodocchgi1,
gd_error type sy-subrc.
data: it_message type standard table of SOLISTI1 initial size 0
with header line.
data : found_receiver type c,
v_title(80) type c,
l_text(180) type c.
Fill the document data.
gd_doc_data-doc_size = 1.
Adds text to email text table
append 'Pls see attached open purchase order report.' to it_message.
append '' to it_message.
concatenate 'Note: This is system generated report'
', figures may subject to actual physical count.'
into l_text separated by space.
append l_text to it_message.
Populate the subject/generic message attributes
CLEAR gd_doc_data.
READ TABLE i_download INDEX w_cnt.
gd_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( i_download ).
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SAPRPT'.
if p_asdate is initial .
concatenate p_title ' '
sy-datum sy-uzeit into v_title separated by space.
else .
concatenate p_title ' '
p_bldat p_cputm into v_title separated by space.
endif .
gd_doc_data-obj_descr = v_title .
gd_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = i_download[].
Describe the body of the message
clear it_packing_list.
refresh it_packing_list.
it_packing_list-transf_bin = space.
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
describe table it_message lines it_packing_list-body_num.
it_packing_list-doc_type = 'RAW'.
append it_packing_list.
Create attachment notification
it_packing_list-transf_bin = 'X'.
it_packing_list-head_start = 1.
it_packing_list-head_num = 1.
it_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES it_packing_list-body_num.
it_packing_list-doc_type = 'XLS'.
it_packing_list-obj_descr = 'OPEN PURCHASE ORDER' .
it_packing_list-obj_name = 'PO.XLS' .
it_packing_list-doc_size = it_packing_list-body_num * 255.
APPEND it_packing_list.
assign SAP user smtp address from successful retrieval.
loop at p_email.
Add the recipients email address
found_receiver = 'X' .
it_receivers-receiver = p_email-low.
it_receivers-rec_type = 'U'.
it_receivers-com_type = 'INT'.
it_receivers-notif_del = ''.
it_receivers-notif_ndel = 'X'.
append it_receivers .
endloop .
Add default recipient email when unable to locate purc group email
if found_receiver is initial .
it_receivers-receiver = p_email.
it_receivers-rec_type = 'U'.
it_receivers-com_type = 'INT'.
it_receivers-notif_del = ''.
it_receivers-notif_ndel = 'X'.
append it_receivers.
endif .
Call the FM to post the message to SAPMAIL
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
exporting
document_data = gd_doc_data
put_in_outbox = 'X'
commit_work = 'X'
importing
sent_to_all = gd_sent_all
tables
packing_list = it_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = it_receivers
exceptions
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
Store function module return code
gd_error = sy-subrc.
Get it_receivers return code
loop at it_receivers.
endloop.
Instructs mail send program for SAPCONNECT to send email.
wait up to 2 seconds.
if gd_error eq 0.
submit rsconn01 with mode = 'INT'
with output = ' '
and return.
endif.
ENDFORM. " f_send_internet_mailHi,
go through this link,
http://www.sapdevelopment.co.uk/reporting/email/emailhome.htm
you have some sample programs.
Regards,
Raghavendra -
Hi all,
i have a written a report where i need to send the report output to somebody via
E-mail.i am sending this report output via E-mail successfully.The receiver receives, my output in excel format.but this excel is not <b>pivoted</b>.
i want , the receiver should get my output in pivoted excel format.i.e my output data should be exactly fit in the excel sheet.
now the columns in excel sheet are overlapping.once i double clicked, the columns are getting separated.i do not want to double click.i want all the columns should come properly i.e excel field length should be adjusted as per the output field length.
i am giving my coding below.plz suggest how i can do the above thing .it's urgent.
any idea will be highly appreaciated.
Regards
if not p_email1 is initial.
perform fill_report_csv.
perform f_send_internet_mail.
endif.
FORM fill_report_csv.
data : l_text(232) type c,
v_matnr1(21) type c,
v_matnr(21) type c,
v_matkl(14) type c,
v_maktx(45) type c,
v_ttlstk(14) type c,
v_verpr(14) type c,
v_werks(14) type c,
v_lgort(14) type c,
v_char(10) type c,
v_stks type p ,
v_po(40) type c,
v_qty(13) type c,
v_qty1 type sy-datum,
v_date(15) type c,
v_date1(15) TYPE C,
v_name(35) type c,
v_eknam(18) type c,
v_lifnr(15) type c,
l_po(40) type c,
v_matnr(20) type c,
l_rate(11) type p decimals 5,
l_flag type c.
concatenate c_equal c_colon 'PO no.' c_colon
into v_po.
concatenate c_equal c_colon 'Material no.' c_colon
into v_matnr.
concatenate c_equal c_colon 'Description.' c_colon
into v_maktx.
concatenate c_equal c_colon 'Due Qty.' c_colon
into v_qty.
concatenate c_equal c_colon 'Del Date.' c_colon
into v_date.
concatenate c_equal c_colon 'Vendor.' c_colon
into v_name.
concatenate c_equal c_colon 'Buyer.' c_colon
into v_eknam.
concatenate c_equal c_colon 'Vendor Code.' c_colon
into v_lifnr.
concatenate
v_po v_matnr v_maktx v_qty
v_date v_name v_eknam v_lifnr
into i_download
SEPARATED BY con_tab.
append i_download .
clear : v_po,v_matnr, v_maktx, v_qty, v_date, v_name, v_eknam,v_lifnr .
clear wa_output.
loop at i_output into wa_output.
on change of wa_output-ebeln.
clear v_lines.
loop at i_eket into wa_eket
where ebeln = wa_output-ebeln.
v_lines = v_lines + 1.
clear wa_eket.
endloop.
**-- Checking of page break
v_lines = sy-linno + v_lines .
if 55 < v_lines .
write:/0(161) sy-uline.
new-page.
endif.
clear v_lines.
loop at i_eket into wa_eket
where ebeln = wa_output-ebeln.
v_lines = v_lines + 1.
clear wa_eket.
endloop.
*-- Calculating the due qty.
wa_output-dumng = wa_output-menge - wa_output-wemng.
*-- Writing the Line items of the PO.
read table i_ekpo into wa_ekpo
with key ebeln = wa_output-ebeln
ebelp = wa_output-ebelp.
l_rate = wa_ekpo-netpr / wa_ekpo-peinh.
*-- Writing of PO detail
if wa_output-dumng gt 0 .
v_qty = wa_output-dumng.
v_date1 = wa_output-eindt.
v_maktx = wa_output-maktx.
if wa_output-maktx+0(1) = '"' .
concatenate c_equal wa_output-maktx
into v_maktx .
else .
concatenate c_equal c_colon wa_output-maktx c_colon
into v_maktx .
endif .
if wa_output-name1+0(1) = '"' .
concatenate c_equal wa_output-name1
into v_name .
else .
concatenate c_equal c_colon wa_output-name1 c_colon
into v_name .
endif .
v_name = wa_output-name1.
v_lifnr = wa_output-lifnr.
write wa_output-eindt to v_date1 DD/MM/YYYY.
concatenate '="' wa_output-ebeln '/'
wa_output-ebelp '"' into v_po .
concatenate '="' wa_output-matnr '"' into v_matnr .
concatenate c_equal c_colon wa_output-maktx c_colon
into v_maktx .
concatenate c_equal c_colon wa_output-dumng c_colon
into v_qty1 .
concatenate c_equal c_colon wa_output-eindt c_colon
into v_date1 .
concatenate c_equal c_colon wa_output-name1 c_colon
into v_name .
concatenate c_equal c_colon wa_output-eknam c_colon
into v_eknam .
concatenate c_equal c_colon wa_output-lifnr c_colon
into v_lifnr .
concatenate c_equal c_colon wa_mard-werks '/'
wa_mard-lgort c_colon
into v_lgort .
concatenate '="' wa_output-lifnr '"' into v_lifnr .
condense:v_po,v_matnr, v_maktx, v_qty, v_date, v_name, v_eknam,v_lifnr .
concatenate
v_po v_matnr v_maktx v_qty
v_date1 v_name v_eknam v_lifnr
into i_download
SEPARATED BY con_tab.
concatenate con_cret i_download INTO i_download .
append i_download .
endif.
clear : v_po,v_matnr, v_maktx, v_qty, v_date, v_name, v_eknam,v_lifnr .
endloop.
ENDFORM. " fill_report_csv
*& Form f_send_internet_mail
text
--> p1 text
<-- p2 text
FORM f_send_internet_mail.
Variables
data: it_packing_list like sopcklsti1 occurs 0 with header line,
it_contents like solisti1 occurs 0 with header line,
it_receivers like somlreci1 occurs 0 with header line,
it_attachment like solisti1 occurs 0 with header line,
gd_cnt type i,
gd_sent_all(1) type c,
gd_doc_data like sodocchgi1,
gd_error type sy-subrc.
data: it_message type standard table of SOLISTI1 initial size 0
with header line.
data : found_receiver type c,
v_title(80) type c,
l_text(180) type c.
Fill the document data.
gd_doc_data-doc_size = 1.
Adds text to email text table
append 'Pls see attached open purchase order report.' to it_message.
append '' to it_message.
concatenate 'Note: This is system generated report'
', figures may subject to actual physical count.'
into l_text separated by space.
append l_text to it_message.
Populate the subject/generic message attributes
CLEAR gd_doc_data.
READ TABLE i_download INDEX w_cnt.
gd_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( i_download ).
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SAPRPT'.
if p_asdate is initial .
concatenate p_title ' '
sy-datum sy-uzeit into v_title separated by space.
else .
concatenate p_title ' '
p_bldat p_cputm into v_title separated by space.
endif .
gd_doc_data-obj_descr = v_title .
gd_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = i_download[].
Describe the body of the message
clear it_packing_list.
refresh it_packing_list.
it_packing_list-transf_bin = space.
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
describe table it_message lines it_packing_list-body_num.
it_packing_list-doc_type = 'RAW'.
append it_packing_list.
Create attachment notification
it_packing_list-transf_bin = 'X'.
it_packing_list-head_start = 1.
it_packing_list-head_num = 1.
it_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES it_packing_list-body_num.
it_packing_list-doc_type = 'XLS'.
it_packing_list-obj_descr = 'OPEN PURCHASE ORDER' .
it_packing_list-obj_name = 'PO.XLS' .
it_packing_list-doc_size = it_packing_list-body_num * 255.
APPEND it_packing_list.
assign SAP user smtp address from successful retrieval.
loop at p_email.
Add the recipients email address
found_receiver = 'X' .
it_receivers-receiver = p_email-low.
it_receivers-rec_type = 'U'.
it_receivers-com_type = 'INT'.
it_receivers-notif_del = ''.
it_receivers-notif_ndel = 'X'.
append it_receivers .
endloop .
Add default recipient email when unable to locate purc group email
if found_receiver is initial .
it_receivers-receiver = p_email.
it_receivers-rec_type = 'U'.
it_receivers-com_type = 'INT'.
it_receivers-notif_del = ''.
it_receivers-notif_ndel = 'X'.
append it_receivers.
endif .
Call the FM to post the message to SAPMAIL
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
exporting
document_data = gd_doc_data
put_in_outbox = 'X'
commit_work = 'X'
importing
sent_to_all = gd_sent_all
tables
packing_list = it_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = it_receivers
exceptions
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
Store function module return code
gd_error = sy-subrc.
Get it_receivers return code
loop at it_receivers.
endloop.
Instructs mail send program for SAPCONNECT to send email.
wait up to 2 seconds.
if gd_error eq 0.
submit rsconn01 with mode = 'INT'
with output = ' '
and return.
endif.
ENDFORM. " f_send_internet_mailans
-
Report output to convert to pdf and mail it to recepient
Hi
I'm using the below coding for converting the output of the program to pdf and then mail it to the recepient.The coding works for background processsing only can i do the same for online.In the write statement i'm using the sy-repid my program name and when i get the pdf mail i'm getting the name of the program but instead i need to get the output of my program.Can any one help me in correcting the coding to get the output in pdf format.I know where i'm going wrong but this is the first time i'm working with this so new to this....It would be better if i could run the program and get the convertions into pdf through mail instead of background processing.....Please change the coding below to get the same.....
DATA: gd_recsize TYPE i.
Spool IDs
TYPES: BEGIN OF t_tbtcp.
INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
wa_tbtcp TYPE t_tbtcp.
Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
gd_eventparm LIKE tbtcm-eventparm,
gd_external_program_active LIKE tbtcm-xpgactive,
gd_jobcount LIKE tbtcm-jobcount,
gd_jobname LIKE tbtcm-jobname,
gd_stepcount LIKE tbtcm-stepcount,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i.
DATA: gd_subject LIKE sodocchgi1-obj_descr,
it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
gd_sender_type LIKE soextreci1-adr_typ,
gd_attachment_desc TYPE so_obj_nam,
gd_attachment_name TYPE so_obj_des.
Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
gd_destination LIKE rlgrap-filename,
gd_bytecount LIKE tst01-dsize,
gd_buffer TYPE string.
Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
c_no(1) TYPE c VALUE ' ',
c_device(4) TYPE c VALUE 'LOCL'.
*START-OF-SELECTION.
START-OF-SELECTION.
Write statement to represent report output. Spool request is created
if write statement is executed in background. This could also be an
ALV grid which would be converted to PDF without any extra effort
WRITE sy-repid.
new-page.
commit work.
new-page print off.
IF sy-batch EQ 'X'.
PERFORM get_job_details.
PERFORM obtain_spool_id.
Alternative way could be to submit another program and store spool
id into memory, will be stored in sy-spono.
*submit ZSPOOLTOPDF2
to sap-spool
spool parameters %_print
archive parameters %_print
without spool dynpro
and return.
Get spool id from program called above
IMPORT w_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.
PERFORM convert_spool_to_pdf.
PERFORM process_email.
if p_delspl EQ 'X'.
PERFORM delete_spool.
endif.
IF sy-sysid = c_dev.
wait up to 5 seconds.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDIF.
ELSE.
SKIP.
WRITE:/ 'Program must be executed in background in-order for spool'
'request to be created.'.
ENDIF.
FORM obtain_spool_id *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
INTO TABLE it_tbtcp
WHERE jobname = gd_jobname
AND jobcount = gd_jobcount
AND stepcount = gd_stepcount
AND listident <> '0000000000'
ORDER BY jobname
jobcount
stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
message s004(zdd) with gd_spool_nr.
gd_spool_nr = wa_tbtcp-listident.
MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
MESSAGE s005(zdd).
ENDIF.
ENDFORM.
FORM get_job_details *
FORM get_job_details.
Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
IMPORTING
eventid = gd_eventid
eventparm = gd_eventparm
external_program_active = gd_external_program_active
jobcount = gd_jobcount
jobname = gd_jobname
stepcount = gd_stepcount
EXCEPTIONS
no_runtime_info = 1
OTHERS = 2.
ENDFORM.
FORM convert_spool_to_pdf *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = gd_spool_nr
no_dialog = c_no
dst_device = c_device
IMPORTING
pdf_bytecount = gd_bytecount
TABLES
pdf = it_pdf_output
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
CHECK sy-subrc = 0.
Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
TRANSLATE it_pdf_output USING ' ~'.
CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
it_mess_att = gd_buffer.
APPEND it_mess_att.
SHIFT gd_buffer LEFT BY 255 PLACES.
IF gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
ENDFORM.
FORM process_email *
FORM process_email.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
CHECK gd_recsize > 0.
PERFORM send_email USING p_email1.
perform send_email using p_email2.
ENDFORM.
FORM send_email *
--> p_email *
FORM send_email USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
Default subject matter
gd_subject = 'Branch Revenue'.
gd_attachment_desc = 'Branch Revenue'.
CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod = 'Branch Revenue,Profit and Commissions'.
APPEND it_mess_bod.
it_mess_bod = 'Message Body text, line 2...'.
APPEND it_mess_bod.
If no sender specified - default blank
IF p_sender EQ space.
gd_sender_type = space.
ELSE.
gd_sender_type = 'INT'.
ENDIF.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_mess_bod
it_mess_att
using p_email
'Branch Revenue'
'PDF'
gd_attachment_name
gd_attachment_desc
p_sender
gd_sender_type
changing gd_error
gd_reciever.
ENDFORM.
FORM delete_spool *
FORM delete_spool.
DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.
ld_spool_nr = gd_spool_nr.
CHECK p_delspl <> c_no.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
EXPORTING
spoolid = ld_spool_nr.
ENDFORM.
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM send_file_as_email_attachment tables it_message
it_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
data: t_packing_list like sopcklsti1 occurs 0 with header line,
t_contents like solisti1 occurs 0 with header line,
t_receivers like somlreci1 occurs 0 with header line,
t_attachment like solisti1 occurs 0 with header line,
t_object_header like solisti1 occurs 0 with header line,
w_cnt type i,
w_sent_all(1) type c,
w_doc_data like sodocchgi1.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
Thanks in advance.....Hi
Below is the code I was used to convert the sap script( Sales Order) to convert to PDf and send as an attachment.
Dev/UDD Id : EUR-770416 *
Author : M.Sreeram Kumar *
Date : 08-Apr-07 *
Request : DU1K933766
Description: Send an order confirmation to the multiple user in a *
PDF format via Email. *
Change Log *
Author : *
Date : *
Description : *
Request : *
Print of an order confirmation by SAPscript
REPORT zrep_email LINE-COUNT 100 MESSAGE-ID vn.
TABLES: komk, "Communicationarea for conditions
komp, "Communicationarea for conditions
komvd, "Communicationarea for conditions
vbco3, "Communicationarea for view
vbdka, "Headerview
vbdpa, "Itemview
vbdpau, "Subitemnumbers
conf_out, "Configuration data
sadr, "Addresses
tvag, "Reason for rejection
vedka, "Servicecontract head data
vedpa, "Servicecontract position data
vedkn, "Servicecontract head notice data
vedpn, "Servicecontract pos. notice data
vbpa, "Sales Document: Partner
kna1, "General Data in Customer Master
riserls, "Serialnumbers
komser, "Serialnumbers for print
tvbur, "Sales office
tvko, "Sales organisation
adrs, "Communicationarea for Address
fpltdr. "billing schedules
INCLUDE zrep_rvadtabl.
*INCLUDE yzrvadtabl.
*INCLUDE RVADTABL.
INCLUDE zrep_rvdirekt.
*INCLUDE yzrvdirekt.
*INCLUDE RVDIREKT.
INCLUDE zrep_vedadata.
*INCLUDE yzvedadata.
*INCLUDE VEDADATA.
DATA: retcode LIKE sy-subrc. "Returncode
DATA: repeat(1) TYPE c.
DATA: xscreen(1) TYPE c. "Output on printer or screen
DATA: BEGIN OF steu, "Controldata for output
vdkex(1) TYPE c,
vdpex(1) TYPE c,
kbkex(1) TYPE c,
kbpex(1) TYPE c,
END OF steu.
DATA: BEGIN OF tvbdpa OCCURS 0. "Internal table for items
INCLUDE STRUCTURE vbdpa.
DATA: END OF tvbdpa.
DATA: BEGIN OF tkomv OCCURS 50.
INCLUDE STRUCTURE komv.
DATA: END OF tkomv.
DATA: BEGIN OF tkomvd OCCURS 50.
INCLUDE STRUCTURE komvd.
DATA: END OF tkomvd.
DATA: BEGIN OF tvbdpau OCCURS 5.
INCLUDE STRUCTURE vbdpau.
DATA: END OF tvbdpau.
DATA: BEGIN OF tkomcon OCCURS 50.
INCLUDE STRUCTURE conf_out.
DATA: END OF tkomcon.
DATA: BEGIN OF tkomservh OCCURS 1.
INCLUDE STRUCTURE vedka.
DATA: END OF tkomservh.
DATA: BEGIN OF tkomservp OCCURS 5.
INCLUDE STRUCTURE vedpa.
DATA: END OF tkomservp.
DATA: BEGIN OF tkomservhn OCCURS 5.
INCLUDE STRUCTURE vedkn.
DATA: END OF tkomservhn.
DATA: BEGIN OF tkomservpn OCCURS 5.
INCLUDE STRUCTURE vedpn.
DATA: END OF tkomservpn.
DATA: BEGIN OF tkomser OCCURS 5.
INCLUDE STRUCTURE riserls.
DATA: END OF tkomser.
DATA: BEGIN OF tkomser_print OCCURS 5.
INCLUDE STRUCTURE komser.
DATA: END OF tkomser_print.
DATA: BEGIN OF tfpltdr OCCURS 5.
INCLUDE STRUCTURE fpltdr.
DATA: END OF tfpltdr.
DATA: pr_kappl(01) TYPE c VALUE 'V'. "Application for pricing
DATA: BEGIN OF char_val OCCURS 0,
atnam LIKE cabn-atnam,
atwrt LIKE ausp-atwrt,
END OF char_val.
FORM entry USING return_code us_screen.
CLEAR retcode.
xscreen = us_screen.
PERFORM processing.
IF retcode NE 0.
return_code = 1.
ELSE.
return_code = 0.
ENDIF.
ENDFORM. "ENTRY
FORM PROCESSING *
FORM processing.
PERFORM get_data.
CHECK retcode = 0.
PERFORM form_open USING xscreen vbdka-land1.
CHECK retcode = 0.
PERFORM logo_selection.
PERFORM form_title_print.
CHECK retcode = 0.
PERFORM write_header_info.
PERFORM validity_print.
CHECK retcode = 0.
PERFORM header_data_print.
CHECK retcode = 0.
PERFORM header_serv_print.
CHECK retcode = 0.
PERFORM header_notice_print.
CHECK retcode = 0.
PERFORM header_inter_print.
CHECK retcode = 0.
PERFORM header_text_print.
CHECK retcode = 0.
PERFORM item_print.
CHECK retcode = 0.
PERFORM end_print.
CHECK retcode = 0.
PERFORM form_close.
CHECK retcode = 0.
PERFORM zemail_process.
ENDFORM. "PROCESSING
S U B R O U T I N E S *
FORM ALTERNATIVE_ITEM *
A text is printed, if the item is an alternative item. *
FORM alternative_item.
CHECK vbdpa-grpos CN '0'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ALTERNATIVE_ITEM'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "ALTERNATIVE_ITEM
FORM CHECK_REPEAT *
A text is printed, if it is a repeat print for the document. *
FORM check_repeat.
CLEAR repeat.
SELECT * INTO *nast FROM nast WHERE kappl = nast-kappl
AND objky = nast-objky
AND kschl = nast-kschl
AND spras = nast-spras
AND parnr = nast-parnr
AND parvw = nast-parvw
AND nacha BETWEEN '1' AND '4'.
CHECK *nast-vstat = '1'.
repeat = 'X'.
EXIT.
ENDSELECT.
ENDFORM. "CHECK_REPEAT
FORM DELIVERY_DATE *
If the delivery date in the item is different to the header *
date and there are no scheduled quantities, the delivery date *
is printed in the item block. *
FORM delivery_date.
IF vbdka-lfdat = space AND
vbdpa-lfdat NE space AND
vbdpa-etenr_da = space.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_DELIVERY_DATE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDFORM. "DELIVERY_DATE
FORM DIFFERENT_CONSIGNEE *
If the consignee in the item is different to the header con- *
signee, it is printed by this routine. *
FORM different_consignee.
CHECK vbdka-name1_we NE vbdpa-name1_we
OR vbdka-name2_we NE vbdpa-name2_we
OR vbdka-name3_we NE vbdpa-name3_we
OR vbdka-name4_we NE vbdpa-name4_we.
CHECK vbdpa-name1_we NE space
OR vbdpa-name2_we NE space
OR vbdpa-name3_we NE space
OR vbdpa-name4_we NE space.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_CONSIGNEE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "DIFFERENT_CONSIGNEE
FORM DIFFERENT_REFERENCE_NO *
If the reference number in the item is different to the header*
reference number, it is printed by this routine. *
FORM different_reference_no.
CHECK vbdpa-vbeln_vang NE vbdka-vbeln_vang
OR vbdpa-vbtyp_vang NE vbdka-vbtyp_vang.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_REFERENCE_NO'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "DIFFERENT_REFERENCE_NO
FORM DIFFERENT_TERMS *
If the terms in the item are different to the header terms, *
they are printed by this routine. *
FORM different_terms.
DATA: us_vposn LIKE vedpa-vposn.
DATA: us_text(1) TYPE c. "Flag for Noticetext was printed
IF vbdpa-zterm NE vbdka-zterm AND
vbdpa-zterm NE space.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_PAYMENT'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
IF vbdpa-inco1 NE space.
IF vbdpa-inco1 NE vbdka-inco1 OR
vbdpa-inco2 NE vbdka-inco2.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_DELIVERY'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDIF.
Print different validity-data for the position
READ TABLE tkomservp WITH KEY vbdpa-posnr.
IF sy-subrc EQ 0.
vedpa = tkomservp.
IF vedpa-vbegdat NE space AND
vedpa-venddat NE space AND
NOT vedpa-vbegdat IS INITIAL AND
NOT vedpa-venddat IS INITIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_SERV1'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ELSEIF vedpa-vbegdat NE space AND
NOT vedpa-vbegdat IS INITIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_SERV2'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_SERV3'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDIF.
Notice-rules for the positions.
MOVE vbdpa-posnr TO us_vposn.
CLEAR us_text.
LOOP AT tkomservpn WHERE vposn = us_vposn.
vedpn = tkomservpn.
IF us_text IS INITIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_NOTTXT'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
us_text = charx.
ENDIF.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_NOTICE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDLOOP.
IF NOT us_text IS INITIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'EMPTY_LINE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDFORM. "DIFFERENT_TERMS
FORM END_PRINT *
FORM end_print.
PERFORM get_header_prices.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command = 'PROTECT'.
PERFORM header_price_print.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'END_VALUES'.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command = 'ENDPROTECT'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'SUPPLEMENT_TEXT'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "END_PRINT
FORM FORM_CLOSE *
End of printing the form *
FORM form_close.
CALL FUNCTION 'CLOSE_FORM'
EXCEPTIONS
OTHERS = 1.
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT =
RDI_RESULT =
TABLES
otfdata = t_otfdata
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
SEND_ERROR = 3
SPOOL_ERROR = 4
CODEPAGE = 5
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF sy-subrc NE 0.
PERFORM protocol_update.
retcode = 1.
ENDIF.
SET COUNTRY space.
ENDFORM. "FORM_CLOSE
FORM FORM_OPEN *
Start of printing the form *
--> US_SCREEN Output on screen *
' ' = printer *
'X' = screen *
--> US_COUNTRY County for telecommunication and SET COUNTRY *
FORM form_open USING us_screen us_country.
INCLUDE zrep_rvadopfo.
INCLUDE yzrvadopfo.
INCLUDE RVADOPFO.
ENDFORM. "FORM_OPEN
FORM FORM_TITLE_PRINT *
Printing of the form title depending of the field VBTYP *
FORM form_title_print.
CASE vbdka-vbtyp.
WHEN 'A'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_A'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'B'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_B'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'C'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_C'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'E'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_E'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'F'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_F'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'G'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_F'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'H'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_H'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'K'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_K'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'L'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_L'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN OTHERS.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_OTHERS'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDCASE.
IF repeat NE space.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'REPEAT'
window = 'REPEAT'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDFORM. "FORM_TITLE_PRINT
FORM GET_DATA *
General provision of data for the form *
FORM get_data.
DATA: us_veda_vbeln LIKE veda-vbeln.
DATA: us_veda_posnr_low LIKE veda-vposn.
CALL FUNCTION 'RV_PRICE_PRINT_REFRESH'
TABLES
tkomv = tkomv.
CLEAR komk.
CLEAR komp.
vbco3-mandt = sy-mandt.
vbco3-spras = nast-spras.
vbco3-vbeln = nast-objky.
vbco3-kunde = nast-parnr.
vbco3-parvw = nast-parvw.
CALL FUNCTION 'RV_DOCUMENT_PRINT_VIEW'
EXPORTING
comwa = vbco3
IMPORTING
kopf = vbdka
TABLES
pos = tvbdpa.
Fetch servicecontract-data and notice-data for head and position.
us_veda_vbeln = vbdka-vbeln.
us_veda_posnr_low = posnr_low.
CALL FUNCTION 'SD_VEDA_GET_PRINT_DATA'
EXPORTING
i_document_number = us_veda_vbeln
i_language = sy-langu
i_posnr_low = us_veda_posnr_low
TABLES
print_data_pos = tkomservp
print_data_head = tkomservh
print_notice_pos = tkomservpn
print_notice_head = tkomservhn.
PERFORM get_controll_data.
PERFORM sender.
PERFORM check_repeat.
PERFORM tvbdpau_create.
ENDFORM. "GET_DATA
FORM GET_ITEM_BILLING_SCHEDULES *
In this routine the billing schedules are fetched from the *
database. *
FORM get_item_billing_schedules.
REFRESH tfpltdr.
CHECK NOT vbdpa-fplnr IS INITIAL.
CALL FUNCTION 'BILLING_SCHED_PRINTVIEW_READ'
EXPORTING
i_fplnr = vbdpa-fplnr
i_language = nast-spras
TABLES
zfpltdr = tfpltdr.
ENDFORM. "GET_ITEM_BILLING_SCHEDULES
*& Form ITEM_BILLING_SCHEDULES_PRINT
This routine prints the billing shedules of a salesdocument *
position. *
FORM item_billing_schedules_print.
DATA: first_line(1) TYPE c.
first_line = charx.
LOOP AT tfpltdr.
fpltdr = tfpltdr.
Output of the following printlines
IF NOT fpltdr-perio IS INITIAL.
periodische Fakturen
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_BILLING_SCHEDULE_PERIODIC'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
bei periodischen nur eine Zeile
EXIT.
ELSEIF fpltdr-fareg CA '14'.
prozentuale Teilfakturierung
IF NOT first_line IS INITIAL.
CLEAR first_line.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_BILLING_SCHEDULE_PERCENT_HEADER'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_BILLING_SCHEDULE_PERCENT'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ELSEIF fpltdr-fareg CA '235'.
wertmäßige Teilfakturierung
IF NOT first_line IS INITIAL.
CLEAR first_line.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_BILLING_SCHEDULE_VALUE_HEADER'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_BILLING_SCHEDULE_VALUE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ELSEIF fpltdr-fareg CA '3'.
Schlußrechnung
ENDIF.
ENDLOOP.
ENDFORM. "ITEM_BILLING_SCHEDULES_PRINT
*eject
FORM GET_ITEM_CHARACTERISTICS *
In this routine the configuration data item is fetched from *
the database. *
FORM get_item_characteristics.
REFRESH tkomcon.
CHECK NOT vbdpa-cuobj IS INITIAL.
CALL FUNCTION 'CUD0_GET_CONFIGURATION' "#EC EXISTS
EXPORTING
instance = vbdpa-cuobj
language = nast-spras
TABLES
configuration = tkomcon
EXCEPTIONS
OTHERS = 4.
ENDFORM. "GET_ITEM_CHARACTERISTICS
FORM GET_ITEM_PRICES *
In this routine the price data for the item is fetched from *
the database. *
FORM get_item_prices.
CLEAR: komp,
tkomv.
IF komk-knumv NE vbdka-knumv.
CLEAR komk.
komk-mandt = sy-mandt.
komk-kalsm = vbdka-kalsm.
komk-kappl = pr_kappl.
komk-waerk = vbdka-waerk.
komk-knumv = vbdka-knumv.
komk-vbtyp = vbdka-vbtyp.
ENDIF.
komp-kposn = vbdpa-posnr.
CALL FUNCTION 'RV_PRICE_PRINT_ITEM'
EXPORTING
comm_head_i = komk
comm_item_i = komp
language = nast-spras
IMPORTING
comm_head_e = komk
comm_item_e = komp
TABLES
tkomv = tkomv
tkomvd = tkomvd.
ENDFORM. "GET_ITEM_PRICES
FORM GET_HEADER_PRICES *
In this routine the price data for the header is fetched from *
the database. *
FORM get_header_prices.
CALL FUNCTION 'RV_PRICE_PRINT_HEAD'
EXPORTING
comm_head_i = komk
language = nast-spras
IMPORTING
comm_head_e = komk
TABLES
tkomv = tkomv
tkomvd = tkomvd.
ENDFORM. "GET_HEADER_PRICES
*& Form HEADER_DATA_PRINT
Printing of header data like terms, weights .... *
FORM header_data_print.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'HEADER_DATA'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. " HEADER_DATA_PRINT
FORM HEADER_PRICE_PRINT *
Printout of the header prices *
FORM header_price_print.
LOOP AT tkomvd.
AT FIRST.
IF komk-supos NE 0.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_SUM'.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'UNDER_LINE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDAT.
komvd = tkomvd.
IF komvd-koaid = 'D'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TAX_LINE'.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'SUM_LINE'.
ENDIF.
ENDLOOP.
DESCRIBE TABLE tkomvd LINES sy-tfill.
IF sy-tfill = 0.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'UNDER_LINE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDFORM. "HEADER_PRICE_PRINT
FORM HEADER_TEXT_PRINT *
Printout of the headertexts *
FORM header_text_print.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'HEADER_TEXT'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "HEADER_TEXT_PRINT
FORM ITEM_CHARACERISTICS_PRINT *
Printout of the item characteristics -> configuration *
FORM item_characteristics_print.
LOOP AT tkomcon.
conf_out = tkomcon.
IF sy-tabix = 1.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_LINE_CONFIGURATION_HEADER'
EXCEPTIONS
OTHERS = 1.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_LINE_CONFIGURATION'
EXCEPTIONS
OTHERS = 1.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM. "ITEM_CHARACTERISTICS_PRINT
FORM ITEM_DELIVERY_CONFIRMATION *
If the delivery date is not confirmed, a text is printed *
FORM item_delivery_confirmation.
CHECK vbdpa-lfdat = space.
CHECK vbdpa-kwmeng NE 0.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_DELIVERY_CONFIRMATION'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "ITEM_DELIVERY_CONFIRMATION
FORM ITEM_PRICE_PRINT *
Printout of the item prices *
FORM item_price_print.
LOOP AT tkomvd.
komvd = tkomvd.
IF sy-tabix = 1.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_LINE_PRICE_QUANTITY'.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_LINE_PRICE_TEXT'.
ENDIF.
ENDLOOP.
ENDFORM. "ITEM_PRICE_PRINT
FORM ITEM_PRINT *
Printout of the items *
FORM item_print.
DATA: da_subrc LIKE sy-subrc,
da_dragr LIKE tvag-dragr.
CALL FUNCTION 'WRITE_FORM' "First header
EXPORTING element = 'ITEM_HEADER'
EXCEPTIONS OTHERS = 1.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
CALL FUNCTION 'WRITE_FORM' "Activate header
EXPORTING element = 'ITEM_HEADER'
type = 'TOP'
EXCEPTIONS OTHERS = 1.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
LOOP AT tvbdpa.
vbdpa = tvbdpa.
TVAG lesen um festzustellen ob abgesagte Positionen gedruckt werden
sollen
PERFORM tvag_select(sapmv45a) USING vbdpa-abgru
da_dragr
space
da_subrc.
IF da_dragr EQ space. "Print rejected item?
IF vbdpa-posnr_neu NE space. "Item
PERFORM get_item_serials.
PERFORM get_item_characteristics.
PERFORM get_item_billing_schedules.
PERFORM get_item_prices.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command = 'ENDPROTECT'.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command = 'PROTECT'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_LINE'.
PERFORM item_rejected.
PERFORM item_price_print.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command = 'ENDPROTECT'.
PERFORM item_text_print.
PERFORM item_serials_print.
PERFORM item_characteristics_print.
PERFORM alternative_item.
PERFORM delivery_date.
PERFORM item_delivery_confirmation.
PERFORM item_billing_schedules_print.
PERFORM different_reference_no.
PERFORM different_terms.
PERFORM different_consignee.
PERFORM schedule_header.
PERFORM main_item.
ELSE.
PERFORM schedule_print.
ENDIF.
ENDIF.
ENDLOOP.
CALL FUNCTION 'WRITE_FORM' "Deactivate Header
EXPORTING element = 'ITEM_HEADER'
function = 'DELETE'
type = 'TOP'
EXCEPTIONS OTHERS = 1.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "ITEM_PRINT
FORM ITEM_REJECTED *
A text is printed, if the item is rejected *
FORM item_rejected.
CHECK NOT vbdpa-abgru IS INITIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_REJECTED'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "ITEM_REJECTED
FORM MAIN_ITEM *
A text is printed, if the item is a main item * -
Printing ABAP List(Report output - SE38) in A3 format
I have a requirement to print the ABAP report in A3 page format. I am using LP01 printer and in in SPAD transcation I Changed the Tab "Output Attributes"
Paper tray = "Paper tray 3" and Tab "Tray Info" Tray 3 = "DINA3" still the report gets print in A4 page format.
Even i tried by changing the lize size and line count...still .... it prints in A4 format only.
Could you let me know what exactly I need to in order to print my report output in A3 Page format.
Waiting for your reply.
Thanks in Advance,
SteevanHi,
Check this below link
http://www.sap-img.com/basis/how-can-i-print-a3-format-in-sap.htm
Cheers!!
VEnk@ -
ABAP Dump while Changing the Layout fields in Report output - RCOPCA02
Hi,
I Copied the Standard Program RCOPCA02 to ZRCOPCA02. I added two new fields(AUART, AUGRU) in the report output. It is executing correctly with default layout, While Changing the layout for displaying new fields it is dumping.
I am not understanding, What should i do...
Here is the Code.
report ZRCOPCA02 no standard page heading message-id km
line-count (2) line-size 81.
type-pools: slis, ecarc.
DDIC-Tabellen *******************************************************
tables: glpca, "Einzelposten / Ist
glu1, "Übergabestruktur FI-SL-Anzeige
t000,
tka01,
sscrfields,
vbak.
Variablen und int. Tabellen *****************************************
data: l_vbeln like vbak-vbeln,
l_auart like vbak-auart,
l_augru like vbak-augru.
data: afield type slis_fieldcat_alv,
sp_group type slis_sp_group_alv,
t_listheader type slis_t_listheader with header line,
t_layout type slis_layout_alv,
t_fieldcat type slis_t_fieldcat_alv,
t_spec_groups type slis_t_sp_group_alv,
event type slis_alv_event,
t_events type slis_t_event,
g_variant like disvariant,
gx_variant like disvariant,
g_exit(1) type c,
g_save(1) type c,
g_repid like sy-repid,
msgtyp like sy-msgty,
lt_dynpread like dynpread occurs 1 with header line,
ls_rpcak like rpcak, "note 0310592
packsize type i value 1000,
text1(60) type c,
text2(60) type c,
oldkokrs like glpca-kokrs,
oldracct like glpca-racct.
data: whr_size type i value 50,"Maximum of single values per MIC 46a
"charact. in the where-clause of the select-statement
lines type i, "number of lines of range table MIC 46a
cnt_rldnr type i, "Zähler Anzahl selektierter Ledger
cnt_kokrs type i, "Zähler Anzahl selektierter KoReKreise
cnt_poper type i, "Zähler Anzahl selektierter Perioden
cnt_ryear type i, "Zähler Anzahl selektierter GeschJahre
cnt_rvers type i, "Zähler Anzahl selektierter Versionen
cnt_bukrs type i, "Zähler Anzahl selektierter BuKreise
empge like dkobr-empge,
ksl_curr like tka01-pcacur,
hsl_curr like t001-waers,
a_rec like rstirec.
data: begin of dim_data.
include structure rgcdi. "data for dimensions
data: end of dim_data.
data: begin of tab_fields occurs 80,
name like dntab-fieldname, "fields in table i_glpca
end of tab_fields.
data: begin of i_glpca occurs 0.
include structure rpca2.
data: racct_ktext like rpcak-ktext,
psppp like prps-posid,
v_auart like vbak-auart,
v_augru like vbak-augru,
end of i_glpca.
data: rw_subrc like sy-subrc, "Flag: Report-Writer-Schnittstelle
re_subrc like sy-subrc, "Flag: Recherche-Schnittstelle
subrc like sy-subrc.
data: set_id like sethier-setid, "Set-ID "RDI_SETS_4.0
set_class like sethier-setclass, "Setklasse "RDI_SETS_4.0
set_sname like sethier-shortname."Setname (24) "RDI_SETS_4.0
data: authorised(1),
s_message(1),
auth_dbcount like sy-tabix,
Hex-Konstanten für Minimum/Maximum-Werte
begin of hex00,
x1(12) type c,
x2(12) type c,
end of hex00,
begin of hexff,
x1(12) type c,
x2(12) type c,
end of hexff.
ranges rclnt for glpca-rclnt.
field-symbols: type ecarc_glpca_curr.
Selektionsoptionen *************************************************
select-options:
rldnr for glpca-rldnr default '8A' no-display,
rassc for glpca-rassc no-display,
rrcty for glpca-rrcty default 0,
rrcty for glpca-rrcty,
rvers for glpca-rvers default '000',
kokrs for glpca-kokrs memory id cac,
bukrs for glpca-rbukrs memory id buk,
poper for glpca-poper default sy-datlo+4(2),
ryear for glpca-ryear default sy-datlo,
poper for glpca-poper,
ryear for glpca-ryear,
prctr for glpca-rprctr matchcode object prct,
pprctr for glpca-sprctr matchcode object prct,
RACCT FOR GLPCA-RACCT MATCHCODE OBJECT KART, "RD_P30K128304
racct for glpca-racct, "RD_P30K128304
drcrk for glpca-drcrk,
activ for glpca-activ,
rhoart for glpca-rhoart,
rfarea for glpca-rfarea,
stagr for glpca-stagr,
rtcur for glpca-rtcur,
runit for glpca-runit,
versa for glpca-versa no-display,
eprctr for glpca-eprctr no-display,
afabe for glpca-afabe no-display,
rmvct for glpca-rmvct no-display,
hrkft for glpca-hrkft no-display, "note 550972
sbukrs for glpca-sbukrs no-display, "note 550972
shoart for glpca-shoart no-display, "note 550972
sfarea for glpca-sfarea no-display, "note 550972
docct for glpca-docct,
docnr for glpca-docnr,
refdocct for glpca-refdocct,
refdocnr for glpca-refdocnr,
werks for glpca-werks,
repmatnr for glpca-rep_matnr matchcode object pca_shlp_rep_matnr,
rscope for glpca-rscope.
parameters: no_rrint no-display default ' '." skip "MICP40K066037
" report-report-interface
display variant ">>MICP40K039857
selection-screen begin of block 0 with frame title text-e01.
parameters: p_vari like disvariant-variant.
selection-screen comment 47(40) varname for field p_vari.
selection-screen end of block 0.
parameters log_grp(4) type c no-display default 'KE5Z'.
"<<MICP40K039857
ranges: v_racct for glpca-racct,
v_prctr for glpca-rprctr,
v_pprctr for glpca-sprctr.
Tabelle mit Werten aus den Berichts-Set vom Report-Writer *
data begin of val_tab occurs 50.
include structure rgciv.
data end of val_tab.
MICP30K166368
feldkatalog und interface für bb-schnittstelle rw MICP30K166368
MICP30K166368
"MICP30K166368
data begin of bbs_fieldtab occurs 20. "MICP30K166368
include structure rstifields. "MICP30K166368
data end of bbs_fieldtab. "MICP30K166368
archiv
type-pools: rsds.
types: begin of ty_archive_objects,
object like arch_obj-object,
end of ty_archive_objects,
ty_t_archive_objects type ty_archive_objects occurs 2.
constants: lc_set type c value 'X',
lc_report type progname value 'KE5Z',
lc_reporttype type reporttype value 'TR'.
tables: admi_files.
select-options lr_files for admi_files-archiv_key no-display.
parameter: read_db type c default 'X' no-display,
read_ar type c no-display,
arc_obj like arch_obj-object no-display,
read_as type c default 'X' no-display.
data : lt_arch_obj type ty_t_archive_objects with header line,
ls_selections type rsds_frange,
lt_selections type rsds_frange_t,
ls_selopt type rsdsselopt,
lt_glpca_archiv type ecarc_t_glpca_curr.
*********************************************************>>MICP40K039857
INITIALIZATION
initialization.
Diverse Initialisierungen
perform init_vars.
g_repid = sy-repid.
Set default values for record type
rrcty-sign = 'I'.
rrcty-option = 'EQ'.
rrcty-low = '0'.
append rrcty.
rrcty-low = '2'.
append rrcty.
Set default values for period and year (if kokrs or bukrs is known)
get parameter id 'BUK' field bukrs-low.
get parameter id 'CAC' field kokrs-low.
if kokrs-low is initial "get contr. area from company code
and not bukrs-low is initial.
call function 'KOKRS_GET_FROM_BUKRS'
exporting
i_bukrs = bukrs-low
importing
e_kokrs = kokrs-low
exceptions
no_kokrs_found = 1
others = 2.
if sy-subrc <> 0.
clear kokrs-low.
endif.
endif.
if not kokrs-low is initial.
call function 'K_KOKRS_READ' "get fiscal year variant
exporting
kokrs = kokrs-low
importing
e_tka01 = tka01
exceptions
not_found = 1
not_found_gjahr = 2
others = 3.
if sy-subrc = 0.
call function 'G_PERIOD_GET'
exporting
date = sy-datlo
variant = tka01-lmona
importing
period = poper-low
year = ryear-low
exceptions
ledger_not_assigned_to_company = 1
period_not_defined = 2
variant_not_defined = 3
others = 4.
if sy-subrc = 0.
poper-sign = 'I'.
poper-option = 'EQ'.
append poper.
ryear-sign = 'I'.
ryear-option = 'EQ'.
append ryear.
endif.
endif.
endif.
Settings for display variants
g_save = 'A'. "Schalter Varianten benutz./allg. speichern
clear g_variant.
g_variant-report = g_repid.
g_variant-log_group = log_grp.
g_variant-username = sy-uname.
Get default variant
gx_variant = g_variant.
call function 'REUSE_ALV_VARIANT_DEFAULT_GET'
exporting
i_save = g_save
changing
cs_variant = gx_variant
exceptions
not_found = 2.
if sy-subrc = 0.
p_vari = gx_variant-variant.
endif.
Set variant
if p_vari is initial.
p_vari = '1SAP'.
move p_vari to gx_variant-variant.
call function 'REUSE_ALV_VARIANT_EXISTENCE'
exporting
i_save = g_save
changing
cs_variant = gx_variant
exceptions
not_found = 1.
if sy-subrc ne 0.
clear p_vari.
clear gx_variant-variant.
endif.
endif.
varname = gx_variant-text.
"<<MICP40K039857
archiv
call function 'KARL_DATA_INPUT_INIT'
exporting
i_report = lc_report
i_reporttype = lc_reporttype
importing
e_xusedb = read_db
e_xusear = read_ar
e_archobj = arc_obj
e_infosys = read_as
tables
t_arch_sel = lr_files.
data: lt_excluding like sy-ucomm occurs 0 with header line.
call function 'RS_SET_SELSCREEN_STATUS'
exporting
p_status = 'SELSCREEN'
p_program = 'RCOPCA02'
tables
p_exclude = lt_excluding.
Initialisieren der Bericht/Bericht-Schnittstellen *
data: ld_no_rrint type boole_d. "note 490484 begin
import rri = ld_no_rrint from memory id 'RCOPCA02_NO_RRI'.
if ld_no_rrint = 'X'.
free memory id 'RCOPCA02_NO_RRI'.
else. "note 490484 end
call function 'G_REPORT_INTERFACE_INIT' "Report-Writer?
exporting "MICP30K166368
table = 'GLPCT' "MICP30K166368
importing
subrc = rw_subrc "MICP30K166368
tables "MICP30K166368
it_fieldr = bbs_fieldtab. "MICP30K166368
call function 'RSTI_APPL_STACK_POP'"oder Recherche?
importing
i_rec = a_rec
exceptions
appl_stack_not_initialized = 1.
re_subrc = sy-subrc.
if re_subrc = 0.
check Receiver is this report
if not ( ( a_rec-rtool = 'RT' and a_rec-ronam = 'RCOPCA02' )
or ( a_rec-rtool = 'TR' and a_rec-ronam = 'KE5Z' ) ) .
re_subrc = 2.
endif.
endif.
endif.
AT SELCTION-SCREEN on value request**********************************
*at selection-screen on value-request for racct-low. "RD "4.6a
"RD "4.6a
call function 'K_RACCT_VALUE_REQUEST' "RD "4.6a
importing "RD "4.6a
e_racct = racct-low. "RD "4.6a
"RD "4.6a
"RD "4.6a
*at selection-screen on value-request for racct-high. "RD "4.6a
"RD "4.6a
call function 'K_RACCT_VALUE_REQUEST' "RD "4.6a
importing "RD "4.6a
e_racct = racct-high. "RD "4.6a
at selection-screen on value-request for p_vari. "MICP40K039857
perform f4_for_variant. "MICP40K039857
at selection-screen on value-request for poper-low. "RD "4.6a
begin of insertion note 522715
call function 'K_KOKRS_READ'
exporting
kokrs = kokrs-low
exceptions
not_found = 1
not_found_gjahr = 2
others = 3.
if sy-subrc = 0.
end of insertion note 522715
call function 'ECPCA_RPMAX_VALUE_REQUEST' "RD "4.6a
exporting "RD "4.6a
i_kokrs = kokrs-low "RD "4.6a
i_ryear = ryear-low "RD "4.6a
importing "RD "4.6a
e_rpmax = poper-low "RD "4.6a
begin of insertion note 522715
exceptions
table_empty = 1.
endif.
end of insertion note 522715
at selection-screen on value-request for poper-high. "RD "4.6a
begin of insertion note 522715
call function 'K_KOKRS_READ'
exporting
kokrs = kokrs-low
exceptions
not_found = 1
not_found_gjahr = 2
others = 3.
if sy-subrc = 0.
end of insertion note 522715
call function 'ECPCA_RPMAX_VALUE_REQUEST' "RD "4.6a
exporting "RD "4.6a
i_kokrs = kokrs-low "RD "4.6a
i_ryear = ryear-low "RD "4.6a
importing "RD "4.6a
e_rpmax = poper-high "RD "4.6a
begin of insertion note 522715
exceptions
table_empty = 1.
endif.
end of insertion note 522715
AT SELCTION-SCREEN ***************************************************
at selection-screen.
perform pai_of_selection_screen.
begin of insertion note 522715
if not kokrs-low is initial.
call function 'K_KOKRS_READ'
exporting
kokrs = kokrs-low
exceptions
not_found = 1
not_found_gjahr = 2
others = 3.
if sy-subrc <> 0.
message e101(ki) with kokrs-low.
endif.
endif.
end of insertion note 522715
archiv
if sy-ucomm = 'FC01' or sy-ucomm = 'UCDS'
or sy-ucomm = 'ONLI' and read_ar = 'X'
and read_as is initial and lr_files[] is initial.
if lt_arch_obj[] is initial.
lt_arch_obj-object = 'PCA_OBJECT'. append lt_arch_obj.
lt_arch_obj-object = 'EC_PCA_ITM'. append lt_arch_obj.
endif.
call function 'KARL_DATA_INPUT_SELECT'
exporting
i_db_and_arc = lc_set
i_infosys_possible = lc_set
i_object_fixed = 'V'
i_documentation = 'KARL_DATA_INPUT_SEL_KE5YZ'
i_report = lc_report
i_reporttype = lc_reporttype
tables
t_objects = lt_arch_obj
t_arch_sel = lr_files
changing
c_xusedb = read_db
c_xusear = read_ar
c_archobj = arc_obj
c_infosys = read_as.
endif.
START-OF-SELECTION **************************************************
start-of-selection.
Default-Werte löschen, falls Aufruf über Recherche
oder Report-Writer erfolgt ist
if no_rrint is initial and ld_no_rrint is initial. "note 490484
if rw_subrc eq 0 or re_subrc eq 0.
refresh: rldnr, rrcty, rvers, kokrs, bukrs, poper, ryear,
racct, prctr, pprctr, drcrk, activ, rhoart, rfarea,
versa, afabe, eprctr,
v_racct, v_prctr, v_pprctr.
clear: rldnr, rrcty, rvers, kokrs, bukrs, poper, ryear,
racct, prctr, pprctr, drcrk, activ, rhoart, rfarea,
versa, afabe, eprctr,
v_racct, v_prctr, v_pprctr.
endif.
Parameter einlesen über Report-Writer-Schnittstelle *
if rw_subrc eq 0.
perform rw_get_parameters.
oder Parameter einlesen über Recherche-Schnittstelle *
elseif re_subrc eq 0.
perform re_get_parameters.
endif.
endif.
if read_db = 'X'. " read from DB (archiv)
Bewegungsdaten einlesen und puffern...................................
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
text = 'Einzelposten selektieren'(p10).
Use dirty trick to mislead DB-optimizer
call function 'DB_DO_NOT_USE_CLIENT_INDEX'
exporting
value = sy-mandt
tables
mandttab = rclnt.
select (tab_fields) from glpca
client specified
package size packsize
APPENDING CORRESPONDING FIELDS OF TABLE i_glpcaO
into corresponding fields of table i_glpca
where rldnr in rldnr
and rrcty in rrcty
and rvers in rvers
and kokrs in kokrs
and rbukrs in bukrs
and ryear in ryear
and rassc in rassc
and hrkft in hrkft "note 550972
and sbukrs in sbukrs "note 550972
and shoart in shoart "note 550972
and sfarea in sfarea "note 550972
and racct in racct
and rprctr in prctr
and sprctr in pprctr
and poper in poper
and drcrk in drcrk
and activ in activ
and rhoart in rhoart
and rfarea in rfarea
and versa in versa
and eprctr in eprctr
and afabe in afabe
and rmvct in rmvct
and docct in docct
and docnr in docnr
and stagr in stagr
and rtcur in rtcur
and runit in runit
and refdocct in refdocct
and refdocnr in refdocnr
and werks in werks
and rep_matnr in repmatnr "RDIP40K020663
and rscope in rscope "RDIP40K020663
and rclnt in rclnt. "dirty trick to mislead DB-optimizer
if sy-dbcnt > 1.
text1 = sy-dbcnt.
condense text1.
concatenate text1 text-m01 into text2 separated by space.
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
text = text2. " ... Datensätze gelesen
endif.
endselect.
Entfernt nicht zugehörige Einträge....................................
loop at i_glpca where ( not rprctr in v_prctr )
or ( not sprctr in v_pprctr )
or ( not racct in v_racct ).
delete i_glpca.
endloop.
endif.
*archiv
if read_ar = 'X' and not
( read_as is initial and lr_files[] is initial ).
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
text = 'Lesen im Archiv'(p12).
define fill_lt_selections.
if not &2[] is initial.
clear ls_selections.
move &1 to ls_selections-fieldname.
loop at &2.
clear ls_selopt.
move-corresponding &2 to ls_selopt.
append ls_selopt to ls_selections-selopt_t.
endloop.
append ls_selections to lt_selections.
endif.
end-of-definition.
fill_lt_selections 'RLDNR' rldnr.
fill_lt_selections 'RRCTY' rrcty.
fill_lt_selections 'RVERS' rvers.
fill_lt_selections 'KOKRS' kokrs.
fill_lt_selections 'RBUKRS' bukrs.
fill_lt_selections 'POPER' poper.
fill_lt_selections 'RYEAR' ryear.
fill_lt_selections 'RPRCTR' prctr.
fill_lt_selections 'SPRCTR' pprctr.
fill_lt_selections 'RACCT' racct.
fill_lt_selections 'DRCRK' drcrk.
fill_lt_selections 'ACTIV' activ.
fill_lt_selections 'RHOART' rhoart.
fill_lt_selections 'RFAREA' rfarea. "note 401961
fill_lt_selections 'STAGR' stagr.
fill_lt_selections 'RTCUR' rtcur.
fill_lt_selections 'RUNIT' runit.
fill_lt_selections 'VERSA' versa.
fill_lt_selections 'EPRCTR' eprctr.
fill_lt_selections 'AFABE' afabe.
fill_lt_selections 'RMVCT' rmvct.
fill_lt_selections 'DOCCT' docct.
fill_lt_selections 'DOCNR' docnr.
fill_lt_selections 'REFDOCCT' refdocct.
fill_lt_selections 'REFDOCNR' refdocnr.
fill_lt_selections 'WERKS' werks.
fill_lt_selections 'REP_MATNR' repmatnr.
fill_lt_selections 'RSCOPE' rscope.
fill_lt_selections 'HRKFT' hrkft. "note 550972
fill_lt_selections 'SBUKRS' sbukrs. "note 550972
fill_lt_selections 'SHOART' shoart. "note 550972
fill_lt_selections 'SFAREA' sfarea. "note 550972
call function 'EC_PCA_SELECT_FROM_ARCHIVE'
exporting
i_selections = lt_selections[]
i_files_sequential_read = lr_files[]
importing
e_glpca = lt_glpca_archiv[]
exceptions
no_infostruc_found = 1.
if sy-subrc = 1.
message id sy-msgid type 'I' number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
clear i_glpca.
loop at lt_glpca_archiv assigning to i_glpca.
append i_glpca.
endloop.
endif.
if i_glpca[] is initial. "Info,nichts gefunden
message s000.
exit.
endif.
get texts for accounts ...............................................
sort i_glpca by kokrs racct.
loop at i_glpca assigning -racct_ktext = ls_rpcak-ktext.
endloop.
Liste mit Einzelposten geeignet sortieren.............................
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
text = 'Einzelposten sortieren'(p30).
if show_ref is initial.
sort i_glpca by rldnr ryear rbukrs rrcty rvers
docct docnr docln.
else.
sort i_glpca by rldnr kokrs ryear rbukrs rrcty rvers poper
refdocct refdocnr refdocln.
endif.
Berechtigungsprüfung und gemerkte Belege aufbereiten .................
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
text = 'Berechtigungsprüfungen'(p40).
clear: cnt_rldnr, cnt_kokrs, cnt_ryear, cnt_rvers, cnt_bukrs.
loop at i_glpca assigning .
Berechtigungscheck
perform check_repo_authority changing authorised.
if authorised is initial.
delete i_glpca.
s_message = 'X'.
zählen der Sätze ohne Berechtigung
auth_dbcount = auth_dbcount + 1.
else. "Weitere Bearbeitung nur für berechtigte Belege...
Zusätzlich merken der Anzahl der Ausprägungen
bestimmter Dimensionen
on change of -rbukrs
ct = '10'
importing
currency = hsl_curr.
endon.
externe Immobilienbezeichnung "ww/kb
on change of i_glpca-imkey.
if ( not -dabrz
I_length = 20
importing
e_empge = -konty.
endif.
CONCATENATE I_GLPCA-KONTY I_GLPCA-EMPGE INTO I_GLPCA-IMBEZ.
endif.
endon.
on change of i_glpca-dabrz.
call function 'REMD_IMKEY_TO_EMPGE'
exporting
i_imkey = i_glpca-imkey
i_dabrz = i_glpca-dabrz
i_length = 20
importing
e_empge = i_glpca-empge
e_konty = i_glpca-konty.
CONCATENATE I_GLPCA-KONTY I_GLPCA-EMPGE INTO I_GLPCA-IMBEZ.
endon.
Konvertierungsproblem mit PSP-Nummer bereinigen
if not -psppp.
endif.
endif.
Währungen in Hilfsfeldern speichern
if -ksl_curr = ksl_curr.
endif.
modify i_glpca.
endif.
endloop.
Nachricht, wenn nicht alle Einzelposten angezeigt werden.
if not s_message is initial.
message s407(km) with auth_dbcount.
endif.
EP ausgeben...........................................................
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
text = 'Einzelposten ausgeben'(p50).
t_layout-detail_initial_lines = 'X'.
t_layout-detail_popup = 'X'.
t_layout-f2code = 'PIC1'. "MICP40K039857
t_layout-get_selinfos = 'X'.
t_layout-group_change_edit = 'X'. "note 576149
perform fill_listheader.
perform fieldcat_fill.
perform spec_groups_fill.
perform events_fill. "MICP40K039857
">>MICP40K039857
call function 'K_KKB_LIST_DISPLAY'
exporting
i_callback_program = 'RCOPCA02'
i_callback_user_command = 'USR_CMD'
i_callback_top_of_page = 'TOP_OF_PAGE'
I_CALLBACK_END_OF_PAGE =
I_CALLBACK_END_OF_LIST =
i_callback_pf_status_set = 'SET_PF_STATUS'
I_CALLBACK_LAYOUT_SAVE =
I_CALLBACK_FIELDCAT_SAVE =
i_tabname = 'I_GLPCA'
is_layout = t_layout
it_fieldcat = t_fieldcat
I_FCTYPE = 'R'
IT_EXCLUDING =
it_special_groups = t_spec_groups
IT_SORT =
IS_SEL_HIDE =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
tables
t_outtab = i_glpca
exceptions
others = 1.
loop at i_glpca.
select single vbeln auart augru
into (l_vbeln, l_auart, l_augru)
from vbak where vbeln = i_glpca-aubel.
if sy-subrc = 0.
move l_auart to i_glpca-v_auart.
move l_augru to i_glpca-v_augru.
modify i_glpca.
endif.
endloop.
call function 'REUSE_ALV_GRID_DISPLAY'
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
exporting
I_INTERFACE_CHECK = ' '
i_callback_program = 'ZRCOPCA02'
i_callback_pf_status_set = 'SET_PF_STATUS'
i_callback_user_command = 'USR_CMD'
i_structure_name = 'I_GLPCA'
is_layout = t_layout
it_fieldcat = t_fieldcat
IT_EXCLUDING =
it_special_groups = t_spec_groups
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
i_default = 'X'
i_save = g_save
is_variant = g_variant
it_events = t_events
IT_EVENT_EXIT =
IS_PRINT =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
tables
t_outtab = i_glpca
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
"<<MICP40K039857
clear i_glpca.
*& Form CHECK_REPO_AUTHORITY
Check only new auth-object K_PCA *
--> p1 text
<-- p2 text
form check_repo_authority changing authorized like authorised.
fill structure for userexit in K_PCA_RESP_AUTHORITY_CHECK
data: auth like pca_i_auth. "46a MIC check K_PCA and G_GLTP
auth-bukrs = -rrcty.
clear authorized.
check PrCtr/account/activity
call function 'K_PCA_RESP_AUTHORITY_CHECK'
exporting
i_kokrs = -racct
i_vorgn = 'REPP'
i_actvt = '28'
i_auth = auth
i_no_dialog_message = 'X'
exceptions
no_authority = 1
data_missing = 2
others = 3.
if sy-subrc = 0. "ok
check ledger/version/record type
call function 'PCA_G_GLTP_AUTH_CHECK'
exporting
rldnr = -rrcty
exceptions
no_authorisation = 1
others = 2.
if sy-subrc = 0. "ok, User is authorized
authorized = 'X'.
endif.
endif.
endform. " CHECK_REPO_AUTHORITY
*& Form INIT_VARS
Initialisieren diverser Hilfsvariablen und -tabellen *
form init_vars.
data begin of nametab occurs 80. "Tabelle mit Feldern aus der RPCA2
include structure dntab.
data end of nametab.
select single * from t000
client specified
where mandt = sy-mandt.
refresh nametab.
call function 'NAMETAB_GET'
exporting
only = 'T'
tabname = 'RPCA2'
tables
nametab = nametab.
Übernehmen der Feldnamen, die auch in der GLPCA
vorkommen.
loop at nametab where fieldname ne 'KSL_CURR'
and fieldname ne 'HSL_CURR'
and fieldname ne 'EMPGE' "ww/kb
and fieldname ne 'KONTY'. "ww/kb
move nametab-fieldname to tab_fields-name.
append tab_fields.
endloop.
fill Fields of receiver for BBS "MIC46C
call function 'RSTI_REPORT_FIELDS_FIND'
exporting
e_repid = 'RCOPCA02'
e_type = 'R'
tables
it_fields = bbs_fieldtab.
correct fieldnames
read table bbs_fieldtab with key rfield = 'PRCTR'.
if sy-subrc = 0.
bbs_fieldtab-rfield = 'RPRCTR'.
modify bbs_fieldtab index sy-tabix.
endif.
read table bbs_fieldtab with key rfield = 'PPRCTR'.
if sy-subrc = 0.
bbs_fieldtab-rfield = 'SPRCTR'.
modify bbs_fieldtab index sy-tabix.
endif.
read table bbs_fieldtab with key rfield = 'BUKRS'.
if sy-subrc = 0.
bbs_fieldtab-rfield = 'RBUKRS'.
modify bbs_fieldtab index sy-tabix.
endif.
Unicode
class cl_abap_char_utilities definition load.
clear hex00 with cl_abap_char_utilities=>minchar.
clear hexff with cl_abap_char_utilities=>maxchar.
endform. " INIT_VARS
FORM FILL_LISTHEADER *
List-Header in Abhängigkeit der selektierten Daten *
form fill_listheader.
read table i_glpca index 1.
if sy-subrc ne 0.
exit.
endif.
t_listheader-typ = 'S'.
t_listheader-key = 'Ledger '(h01).
if cnt_rldnr <= 1.
t_listheader-info = i_glpca-rldnr.
else.
t_listheader-info = '*'.
endif.
append t_listheader.
t_listheader-typ = 'S'.
t_listheader-key = 'Kostenrechnungskreis'(h02).
if cnt_kokrs <= 1.
t_listheader-info = i_glpca-kokrs.
else.
t_listheader-info = '*'.
endif.
append t_listheader.
t_listheader-typ = 'S'.
t_listheader-key = 'Buchungskreis '(h03).
if cnt_bukrs <= 1.
t_listheader-info = i_glpca-rbukrs.
else.
t_listheader-info = '*'.
endif.
append t_listheader.
t_listheader-typ = 'S'.
t_listheader-key = 'Buchungsperiode '(h04).
if cnt_poper <= 1.
t_listheader-info = i_glpca-poper.
else.
t_listheader-info = '*'.
endif.
append t_listheader.
if cnt_ryear <= 1.
t_listheader-typ = 'S'.
t_listheader-key = 'Geschäftsjahr '(h05).
t_listheader-info = i_glpca-ryear.
append t_listheader.
endif.
t_listheader-typ = 'S'.
t_listheader-key = 'Version '(h06).
if cnt_rvers <= 1.
t_listheader-info = i_glpca-rvers.
else.
t_listheader-info = '*'.
endif.
append t_listheader.
endform. "fill_listheader
*& Form FIELDCAT_FILL
*& Aufbau des Feldkataloges für den K_KKB_LIST_DISPLAY, *
*& bzw REUSE_ALV_LIST_DISPLAY, *
*& weitere Infos enthält die FktBaustein-Doku *
form fieldcat_fill.
data: i type i value 0.
refresh t_fieldcat.
Ledger
if cnt_rldnr > 1.
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'RLDNR'.
afield-no_sum = 'X'.
afield-no_out = 'X'.
afield-key = 'X'.
afield-ref_tabname = 'GLPCA'.
afield-sp_group = '1'.
append afield to t_fieldcat.
endif.
Satzart
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'RRCTY'.
afield-no_sum = 'X'.
afield-ref_tabname = 'GLPCA'.
afield-no_out = 'X'.
afield-sp_group = '1'.
append afield to t_fieldcat.
Version
if cnt_rvers > 1.
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'RVERS'.
afield-no_sum = 'X'.
afield-ref_tabname = 'GLPCA'.
afield-no_out = 'X'.
afield-sp_group = '1'.
append afield to t_fieldcat.
endif.
Periode
if cnt_poper > 1.
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'POPER'.
afield-no_sum = 'X'.
afield-ref_tabname = 'GLPCA'.
afield-no_out = 'X'.
afield-sp_group = '1'.
append afield to t_fieldcat.
endif.
Geschäftsjahr
if cnt_ryear > 1.
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'RYEAR'.
afield-no_sum = 'X'.
afield-ref_tabname = 'GLPCA'.
afield-no_out = 'X'.
afield-sp_group = '1'.
append afield to t_fieldcat.
endif.
Referenzbelegtyp
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'REFDOCCT'.
afield-ref_tabname = 'GLPCA'.
afield-key_sel = 'X'.
afield-no_sum = 'X'.
afield-sp_group = '2'.
afield-seltext_s = 'Typ'(t01).
afield-seltext_m = 'Belegtyp'(t02).
afield-seltext_l = 'Ref.Belegtyp'(t03).
afield-outputlen = 3. "Platz für die Sterne der Zwischensummen
if not show_ref is initial.
afield-key = 'X'.
else.
afield-no_out = 'X'.
endif.
append afield to t_fieldcat.
Referenzbelegnummer
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'REFDOCNR'.
afield-ref_tabname = 'GLPCA'.
afield-key_sel = 'X'.
afield-no_sum = 'X'.
afield-sp_group = '2'.
afield-seltext_s = 'Refbeleg'(t04).
afield-seltext_m = 'Refbelegnr'(t05).
afield-seltext_l = 'Ref.Belegnummer'(t06).
if not show_ref is initial.
afield-key = 'X'.
else.
afield-no_out = 'X'.
endif.
appendHi Prabhu,
You are right, problem is with Field Catalog...
When I use FM 'REUSE_ALV_GRID_DISPLAY' it is dumping...
When i tried with FM 'REUSE_ALV_LIST_DISPLAY' it is working perfectly....
how can i use FM 'REUSE_ALV_GRID_DISPLAY' without dumping????
do i need to pass any thing in FM????
Here is the dump:
Runtime Errors MESSAGE_TYPE_X
Occurred on 12/21/2006 at 01:03:24
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Error analysis
Short text of error message:
Technical information about the message:
Message classe...... "0K "
Number.............. 000
User, transaction...
Language key........ "E"
Transaction......... "SE38 "
Program............. "SAPLSLVC "
Screen.............. "SAPLSLVC_FULLSCREEN 0500"
Screen line......... 3
Information on where termination occurred
The termination occurred in the ABAP program "SAPLSLVC " in "LINE_OUT_NEW_2".
The main program was "ZRCOPCA02 ".
The termination occurred in line 918 of the source code of the (Include)
program "LSLVCF01 "
of the source code of program "LSLVCF01 " (when calling the editor 9180).
Source code extract
008880 gs_roid-row_id = rs_row-index * -1.
008890 endif.
008900 gs_roid-sub_row_id = rs_row-rowtype+7(10).
008910 gs_poid-row_id = gs_roid-row_id.
008920 gs_poid-sub_row_id = gs_roid-sub_row_id.
008930 gs_poid-rowtype = rs_row-rowtype.
008940 gs_poid-index = rs_row-index.
008950 insert gs_poid into table rt_poid.
008960 endif.
008970 append gs_roid to rt_roid.
008980
008990 loop at rt_fieldcat assigning <ls_fieldcat> where tech ne 'X' and
009000 no_out ne 'X'.
009010
009020 if gflg_invisible = 'X'.
009030 if <ls_fieldcat>-do_sum is initial.
009040 clear gflg_invisible.
009050 continue.
009060 else.
009070 clear g_col_counter.
009080 clear gflg_invisible.
009090 endif.
009100 endif.
009110
009120 clear gs_lvc_data.
009130 clear g_style.
009140
009150 assign component
009160 <ls_fieldcat>-fieldname of structure rt_data to <g_field>.
009170 if sy-subrc ne 0.
> message x000(0k).
009190 endif.
009200
009210 g_col_counter = g_col_counter + 1.
009220
009230 gs_lvc_data-row_pos = r_row_counter.
009240 gs_lvc_data-col_pos = g_col_counter.
009250 gs_lvc_data-row_id = gs_roid-row_id.
009260 gs_lvc_data-sub_row_id = gs_roid-sub_row_id.
009270
009280 * Endtotal and average
009290 if rs_row-rowtype(1) ca 'T' and <ls_fieldcat>-do_sum = 'C'.
009300 * save the actual grouplevel information
009310 gs_grouplevels = rs_grouplevels.
009320 clear g_lines.
009330
009340 * get number of lines of the collect table
009350 describe table rt_data lines g_lines.
009360 * if there is only one line or the field has no references so
009370 * that only the first line has to be considered
Thanks,
fractal
null -
Hi Experts,
I am customizing the Purchase Order detail Report .Here I need to add total tax details .
I found tax details are in po_distribution_all table.Here tax amount is caluculated for each and every line.
in po_distribution table we have recoverabl and nonrecovera0ble tax
i am following this
tax amount per line =recoveralbe tax + non recoverable tax
tax amount per header= sum(tax amount per line)
total amount = sum(linetotal per header) + sum(tax amount per header)
Please tell me breifly how many forumla colums or summary colums we have to take to get the output.
and
Another requirement is
while creating purchase order template
if there are so many lines per one header
then in second page i need to display the lines data with line headings also(eg:ref num, item,item description,need by date).
so for eg if there are 100 lines per one header
then
header details are displayed on first page (ship to , bill to , supplier)
line details are also displayed on first page(ref num,item, item description,need by date,amount,qty,uom)
suppose in first page first 10 lines are displayed
from second page remaing 90 lines are displayed with line hedadings(ref num,item, item description,need by date,amount,qty,uom)
and in the last page we will get footer(terms and conditions,buyer,email)
Could you please tell me how we will solve them..
Thanks
Ashok
Edited by: 886640 on Oct 27, 2011 12:16 AMHi Experts,
I am customizing the Purchase Order detail Report .Here I need to add total tax details .
I found tax details are in po_distribution_all table.Here tax amount is caluculated for each and every line.
in po_distribution table we have recoverabl and nonrecovera0ble tax
i am following this
tax amount per line =recoveralbe tax + non recoverable tax
tax amount per header= sum(tax amount per line)
total amount = sum(linetotal per header) + sum(tax amount per header)
Please tell me breifly how many forumla colums or summary colums we have to take to get the output.
and
Another requirement is
while creating purchase order template
if there are so many lines per one header
then in second page i need to display the lines data with line headings also(eg:ref num, item,item description,need by date).
so for eg if there are 100 lines per one header
then
header details are displayed on first page (ship to , bill to , supplier)
line details are also displayed on first page(ref num,item, item description,need by date,amount,qty,uom)
suppose in first page first 10 lines are displayed
from second page remaing 90 lines are displayed with line hedadings(ref num,item, item description,need by date,amount,qty,uom)
and in the last page we will get footer(terms and conditions,buyer,email)
Could you please tell me how we will solve them..
Thanks
Ashok
Edited by: 886640 on Oct 27, 2011 12:16 AM -
Product for presenting ABAP report output in Dashboard Presentation
<u>Background</u>
Monash University environment is SAP ERP ECC6 - no BW. The University has undertaken considerable analysis of spend as part of developing a strategic approach to procurement. The data used to undertake this analysis was extracted from SAP MM and FI using a developed ABAP report which collates, categorizes and consolidates all spend information from MM (for our Purchase Order based commitment and expenditure) and FI (for direct invoices and Corporate Credit Card expenditure). This information is then currently exported to MS-Excel to produce a report containing graphs, pie charts etc.
<u>Requirement</u>
To present output from our Spend Analysis Report in a more readable dashboard type presentation. This facility should allow easy manipulation (slice and dice) and drill down of the data.. Our requirement is to have something operating within a very short time-frame, say within a month or two. Although you might suggest Web Dynpro Business Graphic or SEM /BW (as the optimal solution) we understand the set up time for either of these solutions is prohibitive. Visual Composer has been suggested as another option but we have no in-house expertise to determine if this is a viable solution.
Some colleagues visited a conference a couple of weeks ago and saw a demonstration of a product call XenoCube http://www.inlogik.com/downloads/XenoCube_Brochure.pdf
which was proposed as a quick way to present SAP 'raw' report output in a more readable form. Other solutions in this space that have been suggested include:-
Zycus - Actionable Spend Analysis Zycus.com
Emptoris Spend Analysis - emptoris.com
ONIQUA Enterprise Analytics oniqua.com.au
Ariba Buyer ariba.com
SAS Spend Analysis sas.com
Etesius SpendGuardian etesius.com
Can anyone provide advice as to their experience of SAP solution, integrated partner products or any of the about products to satisfy a similar requirement to that which I have outlined? The main selection criteria will include a product which is:
a) quick & easy to implement,
b) presentation and manipulation of ABAP extracted data
c) is scalable and
d) is reasonably priced.
Grateful for any advice regarding a solution .
Thank-youHi,
This development writes to mapped network drive in Unix. The concept will be similar.
[http://wiki.sdn.sap.com/wiki/display/SCM/APOtoMappedNetworkDrive]
cheers
Aveek -
R12 - How to customize the seeded Purchase Order PDF report
Hi,
We need to customize the layout AND the data of the seeded Purchase Order pdf report that is generated in PO Summary form when user picks drop-down menu Inquire->View Document. I know how to set up the Document Type with a customized layout but I do not know how to update the XML data that feeds the layout.
Thanks, MikeMike,
Please review the following documents.
Note: 374165.1 - How To Customize The PDF Output For Printed Purchase Order Report (Portrait) ?
Note: 406094.1 - How To Diagnose Issues Within Oracle Purchasing PDF File Creation for Printing
Regards,
Hussein -
Can we create purchase order through report programming?
hi experts.....
can we create purchase order through report programming?If yes plz give me the thread details?Hi,
Use this code in a program by using a BAPI function module
Anothe rway is using classical/ALV report using call transaction from a report for changing the PO
loop at i_header.
header-ref_1 = i_header-legacy.
headerx-ref_1 = c_x.
header-doc_type = i_header-bsart.
headerx-doc_type = c_x.
header-comp_code = i_header-bukrs.
headerx-comp_code = c_x.
header-purch_org = i_header-ekorg.
headerx-purch_org = c_x.
header-pur_group = i_header-ekgrp.
headerx-pur_group = c_x.
header-vendor = i_header-lifnr.
headerx-vendor = c_x.
concatenate i_header-bedat+4(4)
i_header-bedat+0(2)
i_header-bedat+2(2)
into header-doc_date.
headerx-doc_date = c_x.
header-created_by = i_header-ernam.
headerx-created_by = c_x.
header-currency = i_header-waers.
headerx-currency = c_x.
concatenate i_header-kdatb+4(4)
i_header-kdatb+0(2)
i_header-kdatb+2(2)
into header-vper_start.
headerx-vper_start = c_x.
loop at i_items where legacy = i_header-legacy.
item-po_item = i_items-ebelp.
itemx-po_item = i_items-ebelp.
itemx-po_itemx = c_x.
if i_header-bsart = 'NB'.
item-material = i_items-ematn.
itemx-material = c_x.
schedule-quantity = i_items-menge * 1000.
schedulex-quantity = c_x.
else.
item-short_text = i_items-ematn.
itemx-short_text = c_x.
item-matl_group = '1000'.
itemx-matl_group = c_x.
schedule-quantity = '1'.
schedulex-quantity = c_x.
endif.
item-plant = i_items-werks.
itemx-plant = c_x.
schedule-po_item = i_items-ebelp.
schedule-sched_line = '1'.
schedulex-po_item = i_items-ebelp.
schedulex-sched_line = '1'.
schedulex-po_itemx = c_x.
schedulex-sched_linex = c_x.
concatenate i_items-eildt+0(2)
i_items-eildt+2(2)
i_items-eildt+4(4)
into schedule-delivery_date.
schedulex-delivery_date = c_x.
item-price_unit = i_items-peinh * 100.
itemx-price_unit = c_x.
item-tax_code = i_items-mwskz.
itemx-tax_code = c_x.
item-shipping = i_items-evers.
itemx-shipping = c_x.
account-po_item = i_items-ebelp.
accountx-po_item = i_items-ebelp.
accountx-po_itemx = c_x.
if i_header-bsart = 'FO'.
item-pckg_no = sy-tabix.
itemx-pckg_no = 'X'.
limits-pckg_no = sy-tabix.
limits-limit = i_items-overalllimit.
limits-exp_value = i_items-expectedoverall.
posrvaccessvalues-pckg_no = sy-tabix.
posrvaccessvalues-line_no = '0'.
posrvaccessvalues-serno_line = '00'.
posrvaccessvalues-percentage = '100.0'.
posrvaccessvalues-serial_no = '01'.
account-serial_no = '1'.
accountx-serial_no = '1'.
accountx-serial_nox = c_x.
account-quantity = '1'.
accountx-quantity = c_x.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = i_items-kostl
importing
output = account-costcenter.
accountx-costcenter = c_x.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = i_items-sakto
importing
output = account-gl_account.
accountx-gl_account = c_x.
item-acctasscat = i_items-knttp.
itemx-acctasscat = c_x.
item-item_cat = i_items-epstp.
itemx-item_cat = c_x.
endif.
append:item,itemx,schedule,schedulex,account,accountx,limits,posrvaccessvalues.
clear :item,itemx,schedule,schedulex,account,accountx,limits,posrvaccessvalues.
endloop.
call function 'BAPI_PO_CREATE1'
exporting
poheader = header
poheaderx = headerx
* POADDRVENDOR =
* TESTRUN =
* MEMORY_UNCOMPLETE =
* MEMORY_COMPLETE =
* POEXPIMPHEADER =
* POEXPIMPHEADERX =
* VERSIONS =
* NO_MESSAGING =
* NO_MESSAGE_REQ =
* NO_AUTHORITY =
* NO_PRICE_FROM_PO =
importing
exppurchaseorder = ponumber
* EXPHEADER =
* EXPPOEXPIMPHEADER =
tables
return = return
poitem = item
poitemx = itemx
* POADDRDELIVERY =
poschedule = schedule
poschedulex = schedulex
poaccount = account
* POACCOUNTPROFITSEGMENT =
poaccountx = accountx
* POCONDHEADER =
* POCONDHEADERX =
* POCOND =
* POCONDX =
polimits = limits
* POCONTRACTLIMITS =
* POSERVICES =
posrvaccessvalues = posrvaccessvalues.
* POSERVICESTEXT =
* EXTENSIONIN =
* EXTENSIONOUT =
* POEXPIMPITEM =
* POEXPIMPITEMX =
* POTEXTHEADER =
* POTEXTITEM =
* ALLVERSIONS =
* POPARTNER =
if ponumber eq space.
loop at return where type = 'E'.
clear buffer.
move-corresponding return to e_return.
concatenate i_header-legacy e_return into buffer.
transfer buffer to p2_file.
endloop.
move-corresponding i_header to i_eheader.
transfer i_eheader to p3_file.
loop at i_items where legacy = i_header-legacy.
move-corresponding i_items to i_eitems.
transfer i_eitems to p4_file.
endloop.
else.
commit work and wait.
endif.
clear:ponumber,header,headerx,item,itemx,account,accountx,limits,return,schedule,schedulex,posrvaccessvalues.
refresh:item,itemx,account,accountx,limits,return,schedule,schedulex,posrvaccessvalues.
endloop.
close dataset p2_file.
close dataset p3_file.
close dataset p4_file.
Regards
Krishna -
Options for ABAP report output in Dashboard type presentation
Background
Monash University environment is SAP ERP ECC6 - no BW. The University has undertaken considerable analysis of spend as part of developing a strategic approach to procurement. The data used to undertake this analysis was extracted from SAP MM and FI using a developed ABAP report which collates, categorizes and consolidates all spend information from MM (for our Purchase Order based commitment and expenditure) and FI (for direct invoices and Corporate Credit Card expenditure). This information is then currently exported to MS-Excel to produce a report containing graphs, pie charts etc.
Requirement
To present output from our Spend Analysis Report in a more readable dashboard type presentation. This facility should allow easy manipulation (slice and dice) and drill down of the data.. Our requirement is to have something operating within a very short time-frame, say within a month or two. Although you might suggest Web Dynpro Business Graphic or SEM /BW (as the optimal solution) we understand the set up time for either of these solutions is prohibitive. Visual Composer has been suggested as another option but we have no in-house expertise to determine if this is a viable solution.
Some colleagues visited a conference a couple of weeks ago and saw a demonstration of a product call XenoCube http://www.inlogik.com/downloads/XenoCube_Brochure.pdf
which was proposed as a quick way to present SAP 'raw' report output in a more readable form. Other solutions in this space that have been suggested include:-
Zycus - Actionable Spend Analysis Zycus.com
Emptoris Spend Analysis - emptoris.com
ONIQUA Enterprise Analytics oniqua.com.au
Ariba Buyer ariba.com
SAS Spend Analysis sas.com
Etesius SpendGuardian etesius.com
Can anyone provide advice as to their experience of SAP solution, integrated partner products or any of the about products to satisfy a similar requirement to that which I have outlined? The main selection criteria will include a product which is:
a) quick & easy to implement,
b) presentation and manipulation of ABAP extracted data
c) is scalable and
d) is reasonably priced.
Grateful for any advice regarding a solution .
Thank-youHi,
This development writes to mapped network drive in Unix. The concept will be similar.
[http://wiki.sdn.sap.com/wiki/display/SCM/APOtoMappedNetworkDrive]
cheers
Aveek -
Report Output is not same as R/3 4.7 and ECC6 ( sort issue)
Dear Experts,
I have a problem with external sort used in the program. due to that report output records are not in the same order.
For example, i am extracting data from BSEG with fields company code, fiscal year, document no, item no, amount and GL Respectively.
in both the systems (R/3 4.7 and ECC6), data in internal tables are in same order by default.
but after the external sort using filelds company code, fiscal year and document no.
output records are sorted exactly with respect to the external sort order in both systems, but for certain line items are not in same order.
Please check below example.
For example in R/3:
684
2012
5000000532
5
H
2662.51
411100
684
2012
5000000532
4
H
13
555200
684
2012
5000000532
3
S
0.5
635400
684
2012
5000000532
2
S
12.5
627800
684
2012
5000000532
1
S
2662.51
555209
In ECC6,
684
2012
5000000532
1
S
2662.51
555209
684
2012
5000000532
2
S
12.5
627800
684
2012
5000000532
3
S
0.5
635400
684
2012
5000000532
4
H
13
555200
684
2012
5000000532
5
H
2662.51
411100The order of extracted records can no be assumed to be constant, any SQL optimizer can change behavior, even without any wide upgrade, but a single database or kernel patch as well as many operation of database administrator can change the order, as well as a change of user behavior, if they fill now another field in selection. So it is good practices to always sort (or use sorted type) internal table extracted or use a ORDER BY clause (provided there is an index in database, else do not)
Read online documentation of SELECT statement clause ORDER BY
The order of the rows in the result set refers to all columns that are not listed after ORDER BY, is undefined, and can be different in repeated executions of the same SELECT statement.
There are also some [MANY > 1000] OSS notes on the subject (look for your database, e.g. 1858427 - Incorrect Sorting of SQL-Select Statement, 1859655 - The result set of an SQL-Select Statement may not be sorted, 1858479 - Result set of select statement is not sorted, 1858569 - Incorrect access to result set of SELECT statement, etc.)
Also if you sort an internal table and require records with same key values to keep their respective order, use the STABLE clause.
Regards,
Raymond -
CMS crash with core files and multiple report output generation
Happy new year to everyone,
Our BOXIR3.1SP6FP2 env has recently started behaving weirdly by triggering multiple output to users inbox and email notification out of scheduled reports. Also we have noticed the CMS crash with core file (almost 4GB) generation at the time of multiple report output.
Most of the times, CMC crashes and recycles itself. At few times, CMS services alone went shut down.
OS details: RHEL 5.5, 32 GB RAM, 8 core processor on each of the clustered node, Oracle 10GR2.4 CMS DB server, 11GR2.4 oracle reporting DB server and oracle 11.1.0.6 client.
2015/01/21 23:54:37.946|>=| | |28123|1534131088|{|||||||||||||||DBQueue::Read
2015/01/21 23:54:37.946|==| | |28123|1496185744|
|||||||||||||||(OracleStatement.cpp:156) Prepare: SQL: SELECT ObjectID,
Version, LastModifyTime, CRC, Properties FROM CMS_InfoObjects6 WHERE ObjectID
IN (1004050) ORDER BY ObjectID
2015/01/21 23:54:37.946|==| | |28123|1496185744| ||||||||||||||(OracleStatement.cpp:183) Prepared statement Execute
2015/01/21 23:54:37.965|==| | |28123|1496451984| |||||||||||||||SResourceSource::LoadString 50293
2015/01/21 23:54:37.966|==| | |28123|1496451984| |||||||||||||||SResourceSource::LoadString Unknown exception in database thread
2015/01/21 23:54:37.967|==| | |28123|1496451984| |||||||||||||||SResourceSource::LoadString 33007
2015/01/21 23:54:37.967|==| | |28123|1496451984| |||||||||||||||SResourceSource::LoadString CMS is unstable and will shut down immediately. Reason: %1...
2015/01/21 23:54:38.506|==| | |28123|1496185744| |||||||||||||||(OracleStatement.cpp:156) Prepare: SQL: SELECT ObjectID,
Version, LastModifyTime, CRC, Properties FROM CMS_InfoObjects6 WHERE ObjectID IN (1009213) ORDER BY ObjectID
2015/01/21 23:54:38.506|==| | |28123|1496185744| |||||||||||||||(OracleStatement.cpp:183) Prepared statement Execute
2015/01/21 23:54:38.512|==| | |28123|1455592672| |||||||||||||||(sidaemon.cpp:549) SUNIXDaemon::run: server restart flag is 1..
2015/01/21 23:54:38.513|==| | |28123|1455592672| |||||||||||||||(sidaemon.cpp:552) SUNIXDaemon::run: in abort ...
2015/01/21 23:54:38.513|==| | |28123|1455592672| |||||||||||||||(sidaemon.cpp:555) SUNIXDaemon::run: doing the WithAbort case ...
2015/01/21 23:54:38.520|==| | |28123|1496185744| |||||||||||||||(dbq.cpp:1357) DBQ: Time required to read 1 objects: 20.000000 ms
Thank you,
KarthikHi Denis,
I'm trying my best for the last few weeks to understand the core issue along with SAP however it is still a mystery.
>Ulimit -a
core file size (blocks, -c) 0
data seg size (kbytes, -d) unlimited
scheduling priority (-e) 0
file size (blocks, -f) unlimited
pending signals (-i) 270335
max locked memory (kbytes, -l) 32
max memory size (kbytes, -m) unlimited
open files (-n) 1024
pipe size (512 bytes, -p) 8
POSIX message queues (bytes, -q) 819200
real-time priority (-r) 0
stack size (kbytes, -s) 10240
cpu time (seconds, -t) unlimited
max user processes (-u) 270335
virtual memory (kbytes, -v) unlimited
file locks (-x) unlimited
Below is the observation as part of troubleshooting:
1. CMS breaks at threshold of 3.9 G.
2. CMS DB sits in a different Linux server than BOE server.
3. All core files were generated by boe_cmsd process and are almost 4GB in size (same as max threshold which it breaks).
4. Shell script which I've added in the BOE servers shows that the CMS DB is available/connecting at the time of CMS crash.
5. SAP analysed the Core files and skeptical about the below lines.
#3 0x58687b80 in skgesigCrash ()
from /opt/oracle/product/11.1.0/client_1/lib32/libclntsh.so
#4 0x58687e0d in skgesig_sigactionHandler ()
I'll continue troubleshooting with a hope to fix it at the earliest.
Thanks,
Karthik
Maybe you are looking for
-
I'm hearing audio when the website I'm on doesn't have any audio or video links.
Firefox version 27.0.1, laptop computer. Home page is CNN. I did not click on anything on that page, but did a Google search for quilting information. Now no matter what page I'm on, I hear several news stories repeating - the first one is about Barb
-
Can't create calendar events and reminders
Having a problem creating events on calendar and reminders, the add button or the 'plus sign' is grayed out. and my past few added events is missing, so now, my meetings, meet ups and important events. im using iPhone 4S running in iOS 7.1.2
-
Network Preferences disappeared in 10.5.8
I just randomly went to check my Network Preferences to restart my wireless internet connection- and it's not there. I'm running OS X Version 10.5.8 and I'm not experiencing any other problems. Under System Preferences > Internet & Network, I have th
-
Searching for a list of elements in an array
Hi, In labview you can search an array for an element and it will return the index of the element that is found. Is it possible to search an array for a list of elements, say multiple elements that are follow each other. For example if I have some ar
-
Ciao sono amico di Ale fico Mi ha detto di chiederti: Mi é successo un casino Quando cercò di acquistare una app col mio ID mi fa le domande di sicurezza. Non mele ricordo anche perché l ID l'ho fatto 2 anni fa e non mele aveva mai chieste Come facci