COUNT OF ROWS

Hi ,
I want to find count of rows of a particular data set in a table expression. How to do that? Can you please help me out.
Thanks
susheel
sush

Hi Dimant,
I used countrows. If the dataset set contains 12 rows I am getting the o/p as shown below. I just need one row. Can please help me out.
Thanks
sush

Similar Messages

Count of rows from different tables.

Hi Friends,
I have 4 tables with a common column name "ID". I would like to get the count of rows from all the four tables which has the same ID.
Ex
select count(a.id) from table1 a,table2 b,table3 c,table4 d where a.id=b.id=c.id=d.id=5;
please suggest me some solution

may be thsi?
select count(a.id) from table1 a,table2 b,table3 c,table4 d
where a.id=b.id and a.id=c.id and a.id=d.id and a.id=5;

Count of Rows - Meaure

Hi There,
I am trying to create a measure in cube browser which will return count of rows of a table. If there are some rows, it returns correct result but in other case if table is empty, it returns nothing.
I want to return 0 in later case.
Please advise.

You could create a Measure with code. Something like this, it is made in AdventureWorks2014.
CREATE MEMBER CurrentCube.Measures.[Count Rows Dimension] AS
CoalesceEmpty(COUNT([Customer].[Customer].[Customer]),0),
Associated_Measure_Group = 'Measure Group you want it associated to';

Count the rows in a list-component

Hi,
How can I count the rows with a value in a list component?
I thought it would be RowCount but as I figured out that shows the number of shown rows, not the number of rows with a value.

Hi,
Try list.dataProvider.length

Count of rows of a table in header

Hi Experts,
I am stuck in a tricky scenario.
I need to get the count of rows of a table in a webi report in the header of the report.
And the count should change dynamically according to the filtering done on the table.
For eg.
If I have 10 countries in a table, so table has 10 rows.
Now the count on header should show 10.
Now if we filter the column to 5 countries, the count on the header should change to 5.
Any Idea's.
Regards,
Gaurav

Nops
It doesn't work.
Let me reframe my issue again:
I dragged country object on my report.
UK
US
JAPAN
CANADA
Now lets say in the report title, I write the formula as =Count(country)
It will give me 4.
Now I clicked on the column country and applied filter i.e. country = US ; UK
Now the block shows
UK
US
In the header the cell still shows 4, which I want to see as 2.
Any ideas....?
Thanks
Gaurav

Calculating a count of rows where value matches another column value in the same table

Hi,
I'm struggling to do something in DAX that seems to me should be super easy (coming from a SQL world)!
That is to count all rows in column 1 where the value matches the current value for column 1?
E.g something like this:
[Col2]=Count of rows in [Col1] where value = this.[Col1]
Where the results are as in the table below:
Col1, Col2
A, 2
A, 2
B, 1
Anyone?
Martin Laukkanen
Nearbaseline blog - nearbaseline.com/blog
Bulk Edit and other Apps - nearbaseline.com/apps

Thanks, that's perfect!
I knew it had to be something so simple, but after spending over an hour banging my head against those exact functions I couldn't get anything working!
Martin Laukkanen
Nearbaseline blog - nearbaseline.com/blog
Bulk Edit and other Apps - nearbaseline.com/apps

How to get count of rows for a table?

Hi,
How to get count of rows for a table and secondly, how can i have access to a particular cell in a table?
Regards,
Devashish

Hi Devashish,
WdContext.node<Your_node_name>().size() will give you the no: of rows.
This should be the node that is bound to the table's datasource property.
WdContext.node<Your_node_name>().get<node_name>ElementAt(index_value); will select the row at that particular index.
You can access an attribute of a particular row as
WdContext.node<Your_node_name>().get<node_name>ElementAt(index_value).get<attribute_name>();
Hope this helps,
Best Regards,
Nibu.
Message was edited by: Nibu Wilson

Count all rows of a Database table

I want to count all the rows of a table.
I have made correctly the connection with the database and all the other things (make a statement, make the query and the resultSet), I use the MySQL server v4.0.17
Here is the code I use:
int count=0;
String temp=null;
String query = "SELECT COUNT(*) FROM customers";//customers is my Database Table
try {
rs = stmt.executeQuery(query);
}//end try
catch(Exception exc) {
createFeatures.PlayErrorSound(registerRenter);
Optionpane.showMessageDialog(registerRenter,
"MESSAGE", "ERROR", JOptionPane.ERROR_MESSAGE);
}//end catch
try {
while(rs.next()) {
count++; //I use this variable in order to count the rows because the resultSet doesn't tell me the answer
countLine=rs.getInt(1);
}//end while
}//end try
catch(Exception exc) {
createFeatures.PlayErrorSound(registerRenter);
Optionpane.showMessageDialog(registerRenter,
"MESSAGE", "ERROR", JOptionPane.ERROR_MESSAGE);
}//end catch
count=count++; //i increase it aggain because if the rows are initial 0 i want to make it 1
temp = String.valueOf(count);//i use this command in order to display the result into a jtextfield
Any help is appreciated!!!!!

This program will work just fine against mysql:
mport java.util.*;
import java.io.*;
import java.sql.*;
public class Test {
public static void main(String []args) {
String url= "jdbc:mysql://localhost/adatabase";
String query = "select count(*) from foo2";
String createQuery="create table foo2(f1 int)";
String dropQuery="drop table foo2";
String insertQuery="insert into foo2 values(1)";
Properties props = new Properties();
props.put("user", "auser");
props.put("password", "xxxxx");
try {
Class.forName("com.mysql.jdbc.Driver").newInstance();
System.out.println("Connecting to the msql server");
Connection con = DriverManager.getConnection(url, props);
Statement stmt = con.createStatement();
try {
stmt.executeUpdate(dropQuery);
} catch(SQLException e) {}
stmt.executeUpdate(createQuery);
stmt.executeUpdate(insertQuery);
stmt.executeUpdate(insertQuery);
PreparedStatement pstmt = con.prepareStatement(query);
System.out.println("***Executing a select");
ResultSet rs = pstmt.executeQuery();
while (rs.next()) {
System.out.println("RowCount="+ rs.getString(1));
rs.close();
pstmt.close();
stmt.close();
con.close();
} catch(Exception e) {
System.out.println(e.getMessage());
}

Count of rows in ALv report

Hi!
I would like to get the count of rows in my ALV report . How to get the count of the rows ? Can anyone guide me in getting it dome please.
Thanks

Hi Gaddemmedi!
I am attaching the report as you had asked for. I have added the things you asked me to do and now I am getting the count on the top of the page. The problem is that though it shows me the count of the lines from the LAV report on top but when I try to filter the records in the report that count first of all dosent change and remain the same as the initial number of record though after filtering records reduce and over that the count lines keep on increasing I mean the count is shown in repeated lines afet lines. Kindly help please.
Thanks
*& Report ZSD_BILLING_HDR_TEXT_sum                                       *
*&         billing doc. and associated header text report              *
*&                            CHANGE LOG                               *
*& jpoon 2007.08.03                  Change request: DEVK905095        *
*& Move request: SD_1451_01          Requestor: Mona Fox               *
*& FP14134 - original code.                                            *
REPORT zsd_billing_hdr_text_sum MESSAGE-ID zsd NO STANDARD PAGE HEADING.
* For ALV usage
TYPE-POOLS: slis.
DATA: gs_layout   TYPE slis_layout_alv,
      tp_print    TYPE slis_print_alv,
      gt_sort     TYPE slis_t_sortinfo_alv,
      gt_events   TYPE slis_t_event,
      t_fieldcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
      repid       TYPE syrepid,               " ABAP Program.
      gt_list_top_of_page TYPE slis_t_listheader,     " Top of page text.
      alv_variant   TYPE disvariant," Customize Disp. Variant
      w_event type slis_alv_event.
DATA: w_field    TYPE slis_fieldcat_alv.
TABLES: vbrk, vbrp, vbpa.
DATA SLIS_EV_AFTER_OUTPUT.
data: gs_list_top_of_page type slis_listheader.
*data: gt_list_top_of_page type slis_t_listheader.
* Definition of selection screen                                       *
*   By plant, storage location, sold-to customers, material and        *
*   posting date of the sales orders                                   *
SELECTION-SCREEN BEGIN OF BLOCK one WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_vbeln FOR vbrk-vbeln,      " billing doc.
                s_kunnr FOR vbpa-kunnr,      " bill-to customer number.
                s_werks FOR vbrp-werks,      " line item plant.
                s_fkdat FOR vbrk-fkdat,      " billing date.
                s_fkart FOR vbrk-fkart,      " billing type.
                s_vkorg FOR vbrk-vkorg.      " sales org.
PARAMETERS:     p_hold   AS CHECKBOX.
SELECTION-SCREEN END OF BLOCK one.
* ALV display layout
SELECTION-SCREEN BEGIN OF BLOCK layout WITH FRAME TITLE text-003.
PARAMETERS: pa_vari TYPE slis_vari DEFAULT ' '. " Display variant.
SELECTION-SCREEN END OF BLOCK layout.
* Data Definitions                                                     *
* Storing Extracted Info.
TYPES: BEGIN OF t_extract,
         vbeln        TYPE vbeln_vf,   " Sales order number.
         posnr        TYPE posnr,      " line item
         fkart        TYPE fkart,      " billing type.
         vtext        TYPE BEZEI20,    " billing type description.
         fkdat        TYPE fkdat,      " billing date.
         werks        TYPE werks_d,    " line item plant.
         werks_name1 TYPE name1,      " plant description.
         kunnr        TYPE kunnr,      " bill-to customer.
         kunnr_name1 TYPE name1_gp,   " bill-to description.
         netwr        TYPE netwr,      " net value,invoice total $
         zzflag       TYPE boolean,    " hold indicator
         zzreason     TYPE char30,     " header text2 (reason)
         zzuser       TYPE ernam,      " last changed by
         zz_changed_date TYPE dats,    " last changed date
         zz_changed_time TYPE tims,    " last changed time
        END OF t_extract.
DATA: it_extract TYPE TABLE OF t_extract WITH HEADER LINE,
      it_extract2 TYPE TABLE OF t_extract WITH HEADER LINE.
DATA: it_text TYPE TABLE OF tline WITH HEADER LINE.
DATA: wa_thead type thead.
DATA: w_tdname type TDOBNAME.
DATA: L_COUNT TYPE I.
* initialization
INITIALIZATION.
gs_layout-colwidth_optimize = 'X'.
tp_print-no_print_listinfos = 'X'.
tp_print-no_coverpage = 'X'.
PERFORM set_fieldcat.
PERFORM alv_eventtab_build USING:
**    Event name     Form to execute     Event internal table
   'TOP_OF_PAGE' 'TOP_OF_PAGE'       gt_events[].
* Dropdown list for all created ALV layouts, global or user-specific
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pa_vari.
PERFORM alv_variant_f4 CHANGING pa_vari.
* Main BODY of processing logic
START-OF-SELECTION.
IF s_vbeln IS INITIAL
AND s_kunnr IS INITIAL
AND s_werks IS INITIAL
AND s_fkdat IS INITIAL
AND s_fkart IS INITIAL
AND s_vkorg IS INITIAL.
     MESSAGE i000 WITH text-037 ' ' ' ' ' '.
ELSE.
    PERFORM extract_data.
ENDIF.
END-OF-SELECTION.
IF it_extract2[] IS INITIAL.
    MESSAGE i000 WITH text-002 ' ' ' ' ' '.
ELSE.
* Build headings for report.
*    PERFORM build_top_of_page USING gt_list_top_of_page[].
* describe table it_extract2 lines l_count.
*write :/ 'TOTAL NO OF ENTRIES', SY-VLINE, 32 L_COUNT.
      PERFORM call_alv.
*write :/ 'TOTAL NO OF ENTRIES', SY-VLINE, 32 L_COUNT.
ENDIF.
*&      Form EXTRACT_KEY_DATA
* Retreive the data for the report.
FORM extract_data.
CLEAR: it_extract. REFRESH: it_extract.
* read and select billing documents
IF p_hold IS INITIAL.
    SELECT vbrk~vbeln vbrk~fkart vbrk~fkdat vbrk~netwr
           vbrk~zzflag vbrk~zzreason vbrk~zzuser
           vbrk~zz_changed_date vbrk~zz_changed_time
           vbrp~posnr vbrp~werks
      INTO CORRESPONDING FIELDS OF TABLE it_extract
      FROM vbrk INNER JOIN vbrp ON
           vbrk~vbeln = vbrp~vbeln
     WHERE vbrk~vbeln IN s_vbeln
       AND vbrk~fkart IN s_fkart
       AND vbrk~fkdat IN s_fkdat
       AND vbrk~vkorg IN s_vkorg
       AND vbrk~fksto NE 'X'
       AND vbrp~werks IN s_werks.
ELSE.
* read 'held' documents only as per selection
    SELECT vbrk~vbeln vbrk~fkart vbrk~fkdat vbrk~netwr
           vbrk~zzflag vbrk~zzreason vbrk~zzuser
           vbrk~zz_changed_date vbrk~zz_changed_time
           vbrp~posnr vbrp~werks
      INTO CORRESPONDING FIELDS OF TABLE it_extract
      FROM vbrk INNER JOIN vbrp ON
           vbrk~vbeln = vbrp~vbeln
     WHERE vbrk~vbeln IN s_vbeln
       AND vbrk~fkart IN s_fkart
       AND vbrk~fkdat IN s_fkdat
       AND vbrk~vkorg IN s_vkorg
       AND vbrk~fksto NE 'X'
       AND vbrk~zzflag = 'X'
       AND vbrp~werks IN s_werks.
ENDIF.
IF sy-subrc <> 0.
    MESSAGE i000 WITH text-002 ' ' ' ' ' '.
ENDIF.
CHECK sy-subrc = 0.
* only need first line item for this report.
SORT it_extract BY vbeln posnr.
DELETE ADJACENT DUPLICATES FROM it_extract COMPARING vbeln.
LOOP AT it_extract.
* Retrieve and select by sales order bill-to on header level
* as well as lookup bill-to customer name/description
    SELECT SINGLE kunnr FROM vbpa INTO it_extract-kunnr
     WHERE vbeln = it_extract-vbeln
       AND posnr = '000000'
       AND parvw = 'RE'.
    IF it_extract-kunnr IN s_kunnr.
      it_extract-kunnr_name1 = zcl_kna1=>get_name1( it_extract-kunnr ).
    ELSE.
      DELETE it_extract.
      CONTINUE.
    ENDIF.
* lookup billing type description
    SELECT SINGLE vtext FROM tvfkt
      INTO it_extract-vtext
     WHERE spras = sy-langu
       AND fkart = it_extract-fkart.
    IF sy-subrc <> 0.
      clear it_extract-vtext.
    ENDIF.
* lookup plant description
    SELECT SINGLE name1 FROM t001w
      INTO it_extract-werks_name1
     WHERE werks = it_extract-werks.
    IF sy-subrc <> 0.
      clear it_extract-werks_name1.
    ENDIF.
    MOVE-CORRESPONDING it_extract TO it_extract2.
    APPEND it_extract2.
   ENDLOOP.
describe table it_extract2 lines l_count.
ENDFORM.                    " EXTRACT_DATA
*&      Form SET_FIELDCAT
* Create the field catalogue.
FORM set_fieldcat .
*CLEAR W_EVENT.
*W_EVENT-FORM = SLIS_EV_AFTER_OUTPUT.
*W_EVENT-NAME = SLIS_EV_AFTER_LINE_OUTPUT.
*APPEND W_EVENT TO GT_EVENTS.
CLEAR w_field.
CLEAR t_fieldcat. REFRESH t_fieldcat.
w_field-col_pos = 1.
w_field-fieldname = 'ZZFLAG'.
w_field-tabname = 'IT_EXTRACT2'.
w_field-seltext_l = 'Hold Printing'(005).
APPEND w_field TO t_fieldcat.
w_field-col_pos = 2.
w_field-fieldname = 'ZZREASON'.
w_field-tabname = 'IT_EXTRACT2'.
w_field-seltext_l = 'Reason'(036).
APPEND w_field TO t_fieldcat.
w_field-col_pos = 3 .
w_field-fieldname = 'VBELN'.
w_field-tabname = 'IT_EXTRACT2'.
w_field-seltext_l = 'Billing Doc'(028).
w_field-emphasize = 'X'.
w_field-hotspot   = 'X'.
APPEND w_field TO t_fieldcat.
CLEAR w_field.
w_field-col_pos = 4 .
w_field-fieldname = 'VTEXT'.
w_field-tabname = 'IT_EXTRACT2'.
w_field-seltext_l = 'Type Description'(030).
APPEND w_field TO t_fieldcat.
w_field-col_pos = 5 .
w_field-fieldname = 'FKDAT'.
w_field-tabname = 'IT_EXTRACT2'.
w_field-seltext_l = 'Billing Date'(031).
APPEND w_field TO t_fieldcat.
w_field-col_pos = 6 .
w_field-fieldname = 'WERKS'.
w_field-tabname = 'IT_EXTRACT2'.
w_field-seltext_l = 'Plant'(012).
APPEND w_field TO t_fieldcat.
w_field-col_pos = 7 .
w_field-fieldname = 'WERKS_NAME1'.
w_field-tabname = 'IT_EXTRACT2'.
w_field-seltext_l = 'Plant Description'(032).
APPEND w_field TO t_fieldcat.
w_field-col_pos = 8.
w_field-fieldname = 'KUNNR'.
w_field-tabname = 'IT_EXTRACT2'.
w_field-seltext_l = 'Bill-to Customer'(033).
APPEND w_field TO t_fieldcat.
w_field-col_pos = 9 .
w_field-fieldname = 'KUNNR_NAME1'.
w_field-tabname = 'IT_EXTRACT2'.
w_field-seltext_l = 'Bill-to Description'(034).
w_field-emphasize = 'X'.
w_field-hotspot   = 'X'.
APPEND w_field TO t_fieldcat.
CLEAR w_field.
w_field-col_pos = 10 .
w_field-fieldname = 'NETWR'.
w_field-tabname = 'IT_EXTRACT2'.
w_field-seltext_l = 'Invoice Amount'(035).
APPEND w_field TO t_fieldcat.
w_field-col_pos = 11 .
w_field-fieldname = 'ZZUSER'.
w_field-tabname = 'IT_EXTRACT2'.
w_field-seltext_l = 'Changed By'.
APPEND w_field TO t_fieldcat.
w_field-col_pos = 12 .
w_field-fieldname = 'ZZ_CHANGED_DATE'.
w_field-tabname = 'IT_EXTRACT2'.
w_field-seltext_l = 'Last Changed Date'(006).
APPEND w_field TO t_fieldcat.
w_field-col_pos = 13 .
w_field-fieldname = 'ZZ_CHANGED_TIME'.
w_field-tabname = 'IT_EXTRACT2'.
w_field-seltext_l = 'Last Changed Time'(007).
APPEND w_field TO t_fieldcat.
* W_event-NAME = slis_ev_end_of_list.
* W_event-FORM = 'END_OF_LIST'.
* APPEND W_event TO GT_EVENTS.
* CLEAR W_event .
* w_field-col_pos = 14 .
* w_field-fieldname = 'COUNT'.
* w_field-tabname = 'IT_EXTRACT2'.
* w_field-seltext_l = 'COUNT'.
* APPEND w_field TO t_fieldcat.
ENDFORM.                    " SET_FIELDCAT
*&      Form CALL_ALV
* Call the ALV Grid function.
FORM call_alv .
SORT it_extract BY vbeln.
* repid is necessary since the ALV F.M. does not work properly with
* sy-repid.
repid = sy-repid.
alv_variant-variant = pa_vari.
alv_variant-report   = sy-repid.
alv_variant-username = sy-uname.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program      = repid
      i_callback_user_command = 'USER_COMMAND'
      is_layout               = gs_layout
      it_fieldcat             = t_fieldcat[]
      it_sort                 = gt_sort[]
      i_default               = 'X'
      i_save                  = 'A'
      is_variant              = alv_variant
      it_events               = gt_events[]
      is_print                = tp_print
    TABLES
      t_outtab                = it_extract2
    EXCEPTIONS
      program_error           = 1
      OTHERS                  = 2.
write :/ 'TOTAL NO OF ENTRIES', SY-VLINE, 32 L_COUNT.
IF sy-subrc NE 0.
    MESSAGE w000 WITH text-004 ' ' ' ' ' '.
ENDIF.
ENDFORM.                    " CALL_ALV
*&      Form alv_eventtab_build
*     Pass list of events to be triggered by the ALV function module
FORM alv_eventtab_build USING u_name TYPE slis_alv_event-name
                               u_form TYPE slis_alv_event-form
                               alv_lt_events TYPE slis_t_event.
DATA: ls_event TYPE slis_alv_event.   " structure for event handling
ls_event-name = u_name.
ls_event-form = u_form.
APPEND ls_event TO alv_lt_events.
ENDFORM.                    " alv_eventtab_build
*       FORM TOP_OF_PAGE                                              *
FORM top_of_page.
*gs_list_top_of_page-type = 'H'.
GS_LIST_TOP_OF_PAGE-INFO = L_COUNT.
APPEND GS_LIST_TOP_OF_PAGE TO GT_LIST_TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      i_logo             = 'NEWALTA_LOGO'
      it_list_commentary = gt_list_top_of_page.
ENDFORM.                    " TOP_OF_PAGE
*&      Form user_command
* Process the user command.
*      -->R_UCOMM      User command
*      -->RS_SELFIELD Field selected
FORM user_command USING r_ucomm     LIKE sy-ucomm
                        rs_selfield TYPE slis_selfield.
DATA: ltp_vbeln TYPE vbeln. " Sales document number.
CASE r_ucomm.
    WHEN '&IC1'.
      IF ( rs_selfield-fieldname = 'VBELN'
        OR rs_selfield-fieldname = 'BILL_VBELN' )
       AND rs_selfield-value IS NOT INITIAL.        " Display sales document.
        ltp_vbeln = rs_selfield-value.
        zcl_sales_doc=>display( ltp_vbeln ).
      ENDIF.
ENDCASE.
ENDFORM.                    "user_command
*&      Form alv_v-ariant_f4
* Get the display variant.
*      <--CTP_VARI Variant name
FORM alv_variant_f4 CHANGING ctp_vari TYPE slis_vari.
alv_variant-report   = sy-repid.             " Report ID
alv_variant-username = sy-uname.             " User ID
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
    EXPORTING
      is_variant = alv_variant
      i_save     = 'A'
    IMPORTING
      es_variant = alv_variant
    EXCEPTIONS
      OTHERS     = 1.
IF sy-subrc = 0.
    ctp_vari = alv_variant-variant.
ENDIF.
ENDFORM.                    " alv_variant_f4

Count MySQL rows based off Value in Dynamic Table

Greetings all. I have 2 MySQL tables; 1 that contains the names of my classes.(Class A, Class, B, etc.) and 1 table that contains the names of students in each Class (for example Class A: John Doe; Class A: Susie Smith.; Class B: Jane Doe). In the 2nd table the Class name is in its own column and the student's name is in a 2nd column.
I currently have a dynamic repeating table that lists the names of all of the classes from the 1st table. What I'm trying to do is add a second column to this repeating dynamic table that lists the number of students in each class. For example; Row 1 of the dynamic table would say "Class A | 5; Class B | 3; Class C | 7, etc.). The dynamic table works perfectly to list the class names. For the life of me I can't figure out how to perform a count for each class to insert in the repeating table. I will be adding more Classes which as why I'm trying to set up the counting query dynamically. So far I have only been able to figure out how to count the total rows in the 2nd table, or count the rows with a specified class name. Any advice or guidance on how to count the number of rows in the 2nd MySQL table based off the class name in the repeating table is much appreciated. Thank you for any and all help. Have a great day.

Select count(*), Class from MyTable
Group by Class
Time to learn about SQL:
http://www.w3schools.com/sql/sql_intro.asp

Need Query to that generate count of rows of all tables

Hi
i need a query which gives the result of no.of rows in talbe and coresponding table name.
And then i need to compare the same with other DB schema
Thanks in advance

Hi User,
We can also get the count of rows for all the tables associated with a User, we can create a custom function which
uses the table name to return results.
CREATE OR REPLACE FUNCTION TAB_ROWS_CNT (TAB_NAME IN VARCHAR2)
   RETURN NUMBER
AS
   TAB_CNT   NUMBER :=0;
BEGIN
   EXECUTE IMMEDIATE 'select count(*) from ' || TAB_NAME
      INTO TAB_CNT;
   RETURN TAB_CNT;
END;And query,
SELECT TABLE_NAME, TAB_ROWS_CNT (TABLE_NAME) ROW_CNT
FROM USER_TABLES;Which gets us the count of Individual Tables for a user.
This is an just that we can do in this way also. But, use which is optimal.
Thanks,
Shankar

ABAP WD: Count of rows using display_type_hierarchy in ALV

Hi,
I am trying to implement display_type_hierarchy in ALV and my requirement is to change the hierarchy based on user selection.
I am able to get the hierarchy based on user selection. For ex: If there are 3 columns in ALV then user can choose the column in a dropdown box and see the hierarchy based on the chosen column. But I want to get the count of rows inside the hierarchy. I did not find any standard method for this. (Is there one?) Could you please let me know how to do it?
Regards,
Srini.

G'day Anett,
Did you manage to get an answer to this issue, we are trying to do the same thing.
Cheers,
Mick.

Sqlldr; restrict count of rows

How can I restrict the count of rows to load.
The skip option allows to skip the first rows, but how can I stop if a defined count of rows is loaded?
I need that for testing
Thanks for your help.
Frank

I have to use to original data in my test case and can not modify the input file.
I like to restrict the count of loaded rows in the control file.

The biggest count of rows of sys tables

Hii ??
I want to learn how can I find the biggest count of rows of sys tables or
which table has around 900000 records on sys user database oracle 10g??

Hello;
What purpose would knowing the row count in tables owned by SYS serve ? The query below will give you a fair idea of row counts in tables owned by SYS assuming that statistics have been recently gathered for these tablesselect table_name,num_rows from dba_tables where owner='SYS';Varad

Paging and count of rows

Hi,
I have a procedure doing paging and returning the count of rows:
As you see I used 2 select, one for paging and one for getting total row counts.
Is there a way to get rid of "SELECT count(*) into PO_TOTAL FROM TABLE1;"?
CREATE OR REPLACE PACKAGE BODY MYPACKAGE AS
TYPE T_CURSOR IS REF CURSOR;
PROCEDURE SP_PAGING
PI_STARTID IN NUMBER,
PI_ENDID IN NUMBER,
PO_TOTAL OUT NUMBER,
CUR_OUT OUT T_CURSOR
IS
BEGIN
OPEN CUR_OUT FOR
SELECT *
FROM (SELECT row_.*, ROWNUM rownum_
FROM (
SELECT column1, column2, column3 FROM TABLE1
) row_
WHERE ROWNUM <= PI_ENDID)
WHERE rownum_ >= PI_STARTID;
SELECT count(*) into PO_TOTAL FROM TABLE1;
END SP_PAGING;
END MYPACKAGE;

Yes, I can reproduce that:
SQL> create table emp1 as select * from emp
2 /
Table created.
SQL> exec dbms_stats.gather_table_stats('SCOTT','EMP1');
PL/SQL procedure successfully completed.
SQL> EXPLAIN PLAN FOR
2 SELECT ename,
3          job,
4          sal,
5          cnt
6    FROM (
7           SELECT ename,
8                   job,
9                   sal,
10                   count(*) over() cnt,
11                   row_number() over(order by 1) rn
12             FROM emp1
13          )
14    WHERE rn BETWEEN 4 AND 9;
Explained.
SQL> @?\rdbms\admin\utlxpls
PLAN_TABLE_OUTPUT
Plan hash value: 1444408506
| Id | Operation           | Name | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT    |      |    14 |   728 |     4 (25)| 00:00:01 |
|* 1 | VIEW               |      |    14 |   728 |     4 (25)| 00:00:01 |
|   2 |   WINDOW BUFFER     |      |    14 |   252 |     4 (25)| 00:00:01 |
|   3 |    TABLE ACCESS FULL| EMP1 |    14 |   252 |     3   (0)| 00:00:01 |
PLAN_TABLE_OUTPUT
Predicate Information (identified by operation id):
   1 - filter("RN">=4 AND "RN"<=9)
15 rows selected.
SQL> EXPLAIN PLAN FOR
2 SELECT *
3 FROM (SELECT row_.*, ROWNUM rownum_
4 FROM (
5 SELECT ename,job,sal, count(*) over() FROM emp1
6 ) row_
7 WHERE ROWNUM <= 9)
8 WHERE rownum_ >= 4;
Explained.
SQL> @?\rdbms\admin\utlxpls
PLAN_TABLE_OUTPUT
Plan hash value: 519025698
| Id | Operation             | Name | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT      |      |     9 |   468 |     2   (0)| 00:00:01 |
|* 1 | VIEW                 |      |     9 |   468 |     2   (0)| 00:00:01 |
|* 2 |   COUNT STOPKEY       |      |       |       |            |          |
|   3 |    VIEW               |      |     9 |   351 |     2   (0)| 00:00:01 |
|   4 |     WINDOW BUFFER     |      |     9 |   162 |     2   (0)| 00:00:01 |
|   5 |      TABLE ACCESS FULL| EMP1 |     9 |   162 |     2   (0)| 00:00:01 |
PLAN_TABLE_OUTPUT
Predicate Information (identified by operation id):
   1 - filter("ROWNUM_">=4)
   2 - filter(ROWNUM<=9)
18 rows selected.
SQL> However, you interpreted it incorrectly. Your query will still fetch all rows in TABLE1. Optimizer is smart enough to stop creating window buffer after 9 rows and that is what you see 9 in explain plan, while my query builds 14 row window buffer and then filters. So your query will be a bit faster.
SY.
Edited by: Solomon Yakobson on Jan 25, 2009 2:51 PM

COUNT OF ROWS

Similar Messages

Maybe you are looking for