Count the no. of rows in a column

I want to count the no. of rows in APR_QTY column that are not equal to zero.
SELECT DISTINCT
SUPP_NAME,
ITEM_NAME,
(CASE WHEN BH_CAL_PERIOD=4 THEN TO_NUMBER(BI_QTY || '.' || BI_QTY_LS) ELSE 0 END)APR_QTY,
(CASE WHEN BH_CAL_PERIOD=4 THEN BI_RATE ELSE 0 END)APR_RATE,
(CASE WHEN BH_CAL_PERIOD=5 THEN TO_NUMBER(BI_QTY || '.' || BI_QTY_LS) ELSE 0 END)MAY_QTY,
(CASE WHEN BH_CAL_PERIOD=5 THEN BI_RATE ELSE 0 END)MAY_RATE,
(CASE WHEN BH_CAL_PERIOD=6 THEN TO_NUMBER(BI_QTY || '.' || BI_QTY_LS) ELSE 0 END)JUNE_QTY,
(CASE WHEN BH_CAL_PERIOD=6 THEN BI_RATE ELSE 0 END)JUNE_RATE,
(CASE WHEN BH_CAL_PERIOD=7 THEN TO_NUMBER(BI_QTY || '.' || BI_QTY_LS) ELSE 0 END)JUL_QTY,
(CASE WHEN BH_CAL_PERIOD=7 THEN BI_RATE ELSE 0 END)JUL_RATE
FROM
OM_SUPPLIER,
OM_ITEM,
OT_BILL_HEAD,
OT_BILL_ITEM,
OT_BILL_ITEM_TED
WHERE BI_BH_SYS_ID = BH_SYS_ID
AND SUPP_CODE = BH_SUPP_CODE
AND ITEM_CODE = BI_ITEM_CODE
AND BH_SYS_ID = ITED_H_SYS_ID
AND BI_SYS_ID = ITED_I_SYS_ID
AND BH_TXN_CODE='SBRLRAW'
GROUP BY BH_CAL_PERIOD,BH_TXN_CODE,SUPP_NAME,ITEM_NAME,BI_RATE,BI_QTY,BI_QTY_LS
ORDER BY ITEM_NAME
Message was edited by:
yogeshyl

Select sum(decode(apr_qty,0,0,1)) as cnt_apr_qty
from ...

Similar Messages

Count the displayed date rows on a column.

Hi,
I am trying to have a table with the following information and try to give a total count (of the dates visible) at the bottom of the table for the date columns. (not counting the rows)
(E.g.- Under the Sent column there are 5 dates displayed and there are 6 numbers associated. On the received column there are 3 dates displayed for 6 numbers)
Could you please advice me how to accomplish this. Thank you in advance.
Rob.
Name SENum SentReceived
John      1234     12/22/06
     5678     12/13/06
     6565     12/19/06     1/6/07
     5656 - -
Jane     9866 12/18/06     1/5/07
Jim     5657 12/18/06 12/14/06
Total:           5      3

I ma not sue what you want but
here is some idea at sql plus
SQL> compute count of ename on deptno
SQL> compute count of sal on deptno
SQL> select deptno,ename,sal from emp order by deptno
2 ;
    DEPTNO ENAME                                                     SAL
        10 CLARK                                                    2450
           KING                                                     5000
           MILLER                                                   1300
count                                                       3          3
        20 SMITH                                                     880
           ADAMS                                                    1100
           FORD                                                     3000
           SCOTT                                                    3000
           JONES                                                    2975
count                                                       5          5
        30 ALLEN                                                    1600
           BLAKE                                                    2850
           MARTIN                                                   1250
           JAMES                                                    1045
           TURNER                                                   1500
           WARD                                                     1250
count                                                       6          6
           DEV                                                      5000
count                                                       1          1

How do I count the unique value pairs in two columns of a table?

I have a table (Table 2) that is populated with data from an imported .csv file. On table 1 I need to count the unique value pairs in two columns of Table 2.
Here's what I have:
Date                                        Person
7/10/2011                         A
7/12/2011                         W
7/12/2011                         X
7/12/2011                         X
7/12/2011                         X
7/12/2011                         Z
7/14/2011                         Z
7/15/2011                 X
7/16/2011                         Z
I'm focusing on person "X" and can easily count how many days that person shows up but what I want is to see on how many unique days that person shows up.
Here's the result I'm looking for (Person "X" shows up on 2 different days - 3 times on 7/12/2011 and once on 7/15/2011):
X                    2
I can't seem to find a function that allows me to do that. I also am not allowed to modify Table 2 so that leaves me to come up with a solution on Table 1.
Any ideas would be greatly appreciated.

Hi John,
Not being allowed to modify Table 2 is a minor inconvenience. Just copy (using a formula) the necessary two columns onto Table 1.
Yellow columns may be hidden. The procedure progresses from left to right. All formulas are entered into row 2 then filled down that column to the end of the table. The table must be as long as the list in column A of Table 2.
A2: =Table 2::A
Fill right to column B.
Fill both columns down as far as needed.
I've used actual Date and Time values in column A, formatted to show only the Date part, but the technique will work with text in these cells, provided all cells representing the same 'date' have exactly the same content.
C2: =A&B
This concatenates the contents of each row of columns A and B into a single text string.
D2: =COUNTIF($C$2:C2,C)
This counts the number of occurrences of the Date&Name string on the current row from the first regular cell in column C (C2) to the current cell.
E2: =IF(COUNTIF($B$2:B2,B)=1,MAX($E$1:E1)+1,"")
This constructs the index of first occurrences of each name, in the order they first occur. The index is used by LOOKUP in column F.
F2: =IF(ROW()-1>MAX(E),"",LOOKUP(ROW()-1,$E,$B))
This uses the index value created in E as a search-for value to extract a single copy of the names in column B. The result is a list of all distinct names in the list. Note that spelling differences will be counted as distinct names.The IF statement stops the listing when the last distinct name is extracted.
G2: =IF(LEN(F)>0,COUNTIFS($B,"="&F,$D,"=1"),"")
This counts the number of 'first occurrences of distinct Date & Name strings for each name on the list (ie. the number of distinct dates on which each name appears in the original list).
All of the functions used are described, with at least one example for each, in the iWork formulas and Functions User Guide. You can download the guide, and the Numbers '09 User Guide, via the Help menu in numbers.
Regards,
Barry

How to count the number of rows in a cube!!??

Experts,
I can somebody tell me how do I count the number of rows in my cube when i am using listcube???..
Thanks
Ashwin

Hi,
have a look ath this theard too
Number of Records in Cube
regards

How to count the number of rows in a resultser object?

hi there
how to count the number of rows in a resultser object which may contains millions of rows? besides using a while loop? thanks

You don't, you execute a query whose result is the record count of those records that match the search and then you execute the actual query to create your record set. Typically you do
select count(id) from YourTable where [filter]
from the resulting ResultSet do
int res.getInt(1);
which gives you the count and then
select id from YourTable where [filter]
to produce the actual result set.
in the second query the id part can be substituted with the actual fields you want.

Count the Number of Rows in Data form

Hi,
I want to count the number of rows in a data form.In my form there is a large number of rows.Is there any way to count it.
Thanks.

If you are on 11.1.2.x then you could look at adding a formula and using the CountA function - http://download.oracle.com/docs/cd/E17236_01/epm.1112/hp_admin/apcs03s06.html
Otherwise it would be possible using custom javascript which you would have to had some experience in using.
Cheers
John
http://john-goodwin.blogspot.com/

Count the number of rows in a workbook.

Hi Experts , I have a requirement to count the number of rows in a WorkBook.Will it be possible to do this by creating a KeyFigure?Or are there any options in BEx to count and display the number of Rows.Many thanks for all your help.

Hi
In the query create a calculated key figure called 'Count' and put a formula as =1, then use this count where ever applicable..you can very well count the no. of rec.
with this.
Hope this helps..
assign points if useful..
Cheers,
Pattan.

Any method of ole2 to count the no. of rows in excel worksheet ??

Dear all,
want to generate a for 1..n loop structure to access the excel worksheet.
iam using ole2 to upload data from excel to oracle.
rest is fine..
till now iam arbitrarily inputting a value as a count from forms to run the loop.
want to know is there any method of ole2 to count the no. of rows in excel worksheet...???
regards,

If you have purchase order number in your cube then you can use the easiest method of all of counting -- a calculated key figure with exception aggregation.
Create a CKF and add any basic key figure to it from your cube (basic means a key figure from the cube, not another CKF or RKF). If you're using the 3.x query designer then click the Enhance button and set the exception aggregation to Counting All Values. If you're using the 7.0 query designer then click on the Aggregation tab and switch the Exception Aggregation to Counter for All Detailed Values. With either query designer set the reference characteristic to your PO number characteristic. This CKF will count the number of PO documents.
See this document for step-by-step instructions: [How to... count the occurrences of a characteristic relative to one or more other characteristics|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7e58e690-0201-0010-fd85-a2f29a41c7af].

Count the no.of rows without using count function

Hi,
How to count the no.of rows without using the count function?
Thanks,

they won't be 100% accurate. You're correct, Bluefrog, but the same goes for doing a count(*) (depending on the size of the table, ofcourse):
the table being queried might be under DML (deletes/inserts), and the next count(*) might give different results.
Both approaches will never be 100% accurate.
But simply selecting num_rows will be much much faster than doing a count(*).
Counting the number of rows always reminds me of this ongoing discussion, by the way:
http://asktom.oracle.com/pls/apex/f?p=100:11:0::::P11_QUESTION_ID:127412348064#14136093079164 ;)
Usually knowing the number of records by approximatly is sufficient, imo. 1000000 or 1000007 records: I don't care, don't need to know that.
I've never needed to know the exact number of records in a table in my code, or been given a requirement that forced me to.

Want to count the number of rows of analysis item in WAD Template

HI all,
Detail Description:
In my WAD report, i have a Export to Excel Option. But I want when I click on this button, one pop up will come only if no of rows of the Analysis Item is Greater than 10,000 ask for Do you want to proceed or not.
Means 1st i want to count the no of rows in the Analysis Item, after that it will check, if the no of rows is greater that 10,000. then the pop up will come.
Question:
Does anyone know, "how to count the no of rows of the analysis Item ?" . It will be better if you know you to implement this with the help of java script.
Means there must be some varible, which counts the no of rows. If you know then please help me

Hi,
Please find the below link which helps you to get solution of your question.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0bbb20f-2d7e-2e10-258f-8655daa41fab?QuickLink=index&overridelayout=true
It is mainly used to automate queries, web templates, and reports in different output formats like PDF, Excel,
XML, XHTML, and HTML
How to see WAD reports on browser:
The BEx Web Application Designer is a desktop application for creating Web applications with BW-specific contents. Using the BEx Web Application Designer, you can create an HTML page that contains contents such as various tables, charts or maps. This HTML page (Web application) provides the basis for not only Web applications with complex interaction, but also for Web cockpits and iViews.
http://help.sap.com/saphelp_nw04/helpdata/en/1a/456a3badc1b315e10000000a114084/content.htm
Web Application Designer for Beginners
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/749a4622-0a01-0010-36bf-b6b30a2a3a22
Web Application Solutions: A Designer's Guide
http://www.lukew.com/resources/webapplicationsolutions.pdf
http://sap.ittoolbox.com/groups/technical-functional/sap-solution-manager/bw-web-application-designer-1955944
Feautures of WAD in 7.0
http://help.sap.com/saphelp_nw70/helpdata/en/88/4d354277dcb26be10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6
Regards
Sudheer

Count the number of rows resulting from a select statement

Hi,
Is there any way of counting the number of rows resulting from a select statement. i.e I have a select distinct statement and I then want to perform an IF statement on the number of rows resulting from the select statement.
Any help appreciated
Thanks
Gary

Declare
var1 number;
Begin
select count(distinct column_name) into
var1 from table_name;
If var1 > x Then
End IF;
End;
Hope I understood the problem correctly
null

Count the number of rows inserted

Hi,
Is there a way to count the number of rows processed post DML in PL/SQL?
For eg,
BEGIN
INSERT INTO TMP1
SELECT * FROM EMP;
a function to count the number of rows inserted into tmp1

SQL> set serveroutput on;
SQL> begin
2 insert into tmp1 select * from emp;
3 dbms_output.put_line(SQL%ROWCOUNT||' rows inserted');
4 end;
5 /
15 rows inserted
PL/SQL procedure successfully completed.

How to count the number of Rows to be Updated before Update takes place..

Hi all,
I have a requirement, where i have to count the number of rows to be updated before updating it. SQL%ROWCOUNT gives the no. of rows updated ( after update takes place). How do i get to know the count of no. of rows to be updated/inserted/ deleted. I was looking for a simple solution, as above SQL%Rowcount. But i couldn't find any. I can use a Function and Return the value which will give me number of rows to be updated, But is there any Simple Logic other than this.. or any count function. Your Help is Appreciated. Thanks!

If you really want to do this (I have no clue why you would need it), then you can piggy back on any existing pessimistic locking you may already have in place.
However, it would require two loops through the records of which you want to know the count before you update, and a second pass to update them.
I would really re-think the need for this, though.
SQL> create table t0304(c number);
Table created.
SQL> insert into t0304 select rownum from all_objects where rownum <= 10;
10 rows created.
SQL> commit;
Commit complete.
SQL> select * from t0304;
         C
         1
         2
         3
         4
         5
         6
         7
         8
         9
        10
10 rows selected.
SQL> declare
2    cursor mycursor is select * from t0304 where mod(c,2) = 0 for update;
3    i number := 0;
4 begin
5    for r in mycursor loop
6      i := i + 1;
7    end loop;
8    dbms_output.put_line(i);
9    for r in mycursor loop
10      update t0304 set c = c + 20 where current of mycursor;
11    end loop;
12 end;
13 /
5
PL/SQL procedure successfully completed.
SQL> commit;
Commit complete.
SQL> select * from t0304;
         C
         1
        22
         3
        24
         5
        26
         7
        28
         9
        30
10 rows selected.
SQL>Edited by: Steve Howard on Mar 4, 2011 5:57 PM

How to count the number or rows in file

Hi Experts,
I am file as source and Oracle as target. My file containing the some data which is going to load to the target.
My requirement is that I want to count the number of rows which my file contains. Please help me how to count the total number of rows in file.
Thx,
Sahadeva.

Hi,
You won't give a name DEST_USER_NAME:ODI will get these information.
it is important Command on source and Command on Source side .
-Pls write jython code on Command on Source side
-And Command On Target side Choose technology as Oracle and set logical schema to HR_logical
Sorry my mistake.İt is related jython syntax.Here is code:
import java.lang as lang
import java.sql as sql
import java.lang.String
import os
lang.Class.forName("<%=snpRef.getInfo("DEST_JAVA_DRIVER")%>")
cons=sql.DriverManager.getConnection("<%=snpRef.getInfo("DEST_JAVA_URL")%>", "<%=snpRef.getInfo("DEST_USER_NAME")%>", "<%=snpRef.getInfo("DEST_PASS")%>")
dblinks= cons.createStatement()
file1=open('EMP.txt','r')
count=0
line=file1.readline()
while line !='':
count+=1
line=file1.readline()
file1.close()
sqlQuery = "insert into HR.ETL_FILE_LOG (FILE_COUNT) values (count)"
rqQuery= dblinks.execute(sqlDBLink)
cons.close()
Regards

How can I count the number of values in one column which answer to a condition in another column?

I'm using Numbers 3.2 and would like to count the names in a column which satisfy a condition in a different column. There are 3 "streams" through which these names have come to me, and I would like to easily identify how many have come from each stream. Any help?

Hi DirtyDawg,
COUNTIF is your friend here.
If your source is in column C and your streams are 1, 2 and 3:
=COUNTIF(C,"=stream1")
=COUNTIF(C,"=stream2")
=COUNTIF(C,"=stream3")
These need to be in a footer or header row or in a different column than C.
hope this helps,
quinn

Count the no. of rows in a column

Similar Messages

Maybe you are looking for