Counter is not ready

Hi,
I am trying to use a counter out from NI 6221 and change the output frequency of TTL waveform on the fly. I have used examples from NI and I figured out I need to use property node of " Couter ready for new value". It is working fine when I am changing frequency but at the moment I set frequency= 0 (Counter says zero is not valid so I set the minimum value which is 0.009313226) the counter does not accept any new value. Basically counter would not get ready for any new value and I have to stop the loop and start it over.
I am wondering if any of you has any idea to reslove this issue,
Thanks,
Saridar
Attachments:
2 channel__with counter_analog in_9-03-14.vi ‏196 KB

Hi Saridar,
Is there a particular reason why you need a frequency of 0 Hz? At 0 Hz the output look like a straight line and from the error message it sounds like your device does not support a pulse of 0 Hz. If the DAQmx task encounters an error then the tasks will stop and throw and error message and you will have to stop the loop and start over in order to recover from it, which would be consistent with the behavior you described. You could possibly catch a specific error and clear it before the DAQmx task is stopped and cleared. Here’s a community example that shows you how to do this:
https://decibel.ni.com/content/docs/DOC-9886
Regards,
K.

Similar Messages

Agent reserved state set to Not Ready

HI
I get this error very randomly on CAD with one agent .
"your agent state has been set to not ready by the pim because some calls were routed to you and haven't been received.Please ask your administrator for help."
no issue with agent desk settings,device target or with PG user.
>login on different phones still same issue.
please suggest.

Now we are getting this error on multiple agents randomly.
we found this error on cmpg
15:25:06:620 pg4A-pim1 Trace: FreePreRoutedCall: Head Inst: N26008 CreatedByPreCall: T PeriphCID: -1 Queue Count: 0 RouterCallKey=(149897/92397)
15:25:08:088 pg4A-pim1 Trace: TelephonyDriver::CSTASupervisorAssist: No dialed number for ID -1
15:25:08:088 pg4A-pim1 Trace: DeskLinkPeripheral::SetAlert - (TelephonyDriver::CSTASupervisorAssist) Setting ERROR Alert #9 - 15:25:8 DialedNumber

Cisco UCS Central High Availability (HA NOT READY)

I am seeing the following message in UCS Central about HA NOT READY
Cluster Id: 0x819cae86c88f11e4-0x8fb4d5434d9b9e52
Start time: Tue Mar 24 12:08:20 2015
Last election time: Tue Mar 24 12:08:50 2015
A: UP, PRIMARY
B: UP, SUBORDINATE
A: memb state UP, lead state PRIMARY, mgmt services state: UP
B: memb state UP, lead state SUBORDINATE, mgmt services state: UP
heartbeat state PRIMARY_OK
HA NOT READY
Waiting for response from device.
Device count, expected: 2, active: 0
Detailed state of the device selected for HA quorum data:
Device 1009, serial: 14713e4e-929e-11e3-aa5e-002a6a7fa904, state: inactive
Device 1008, serial: 7cafb282-b1ed-11e4-a520-8c604f230301, state: inactive
Quorum data local IO failure:
14713e4e-929e-11e3-aa5e-002a6a7fa904 READ_FAILED, error: GENERAL, error code: 32767, error count: 1348947
Quorum data local IO failure:
7cafb282-b1ed-11e4-a520-8c604f230301 READ_FAILED, error: GENERAL, error code: 32767, error count: 1348947
Warning: there are pending I/O errors on one or more devices, failover may not complete

The management services on each node are all running
show pmon state
SERVICE NAME STATE RETRY(MAX) CORE
pmon running N/A N/A
core-svc_cor_dme running 0(4) no
service-reg-svc_reg_dme running 0(4) no
core-svc_cor_secAG running 0(4) no
operation-mgr-svc_ops_imgMgmtAG running 0(4) no
resource-mgr-svc_rsrcMgr_dme running 0(4) no
identifier-mgr-svc_idm_dme running 0(4) no
central-mgr-svc_centralMgr_dme running 0(4) no
service-reg-svc_sam_controller running 0(4) no
policy-mgr-svc_pol_dme running 0(4) no
sam_cores_mon.sh running 0(4) no
core-svc_cor_controllerAG running 0(4) no
operation-mgr-svc_ops_dme running 0(4) no
service-reg-svc_sam_licenseAG running 0(4) no
policy-mgr-svc_sam_pkiAG running 0(4) no
core-httpd.sh running 0(4) no
stats-mgr-svc_statsMgr_dme running 0(4) no
core-svc_cor_sessionmgrAG running 0(4) no
I can ping the two registered domains from both nodes

Linux is not ready for the desktop - Mandriva devs

I just read this in the latest DistroWatch Weekly:
You wouldn't expect something like this to happen at any time, let alone on the eve of Mandriva Linux 2007 release. Last week, two Mandriva developers went on record saying that "Linux is not ready for the desktop". In a web log post entitled Why I'll never use Linux for my main desktop, Vincent Danen concluded: "This kind of thing is precisely why, for me, Linux belongs on the server. Now if those kernel-developing idiots would get their act together and give us a 2.6 kernel that was a) stable and b) supported for more than a week, then I'd really be pleased." Another Mandriva developer, Fabrice Facorat, agreed. In a post called Linux ready for Desktop? Of course not!, he had this to say: "For me when you have control over the environment and the hardware, Linux is ready: think servers, workstations, thin clients, kiosks. However when you have no control on the hardware, Linux is not ready because it somewhat lacks flexibility."
There you have it, right from the horse's mouth! From two guys who have been working for a Linux company, developing a popular desktop Linux distribution, for years! Yes, that's right, Mandriva Linux is not ready for your desktop! Don't waste your money buying it!
One really has to wonder about the future of a company which happily asks Gaël Duval to leave, yet is quite pleased to keep developers who publicly hint that they consider Linus Torvalds, Alan Cox and other kernel developers "idiots"! A perfect pre-release PR, non?
No comments... I just cannot find any words. :shock: :?

ughhhh. Mandrake have always sucked at marketing, they do themselves no favours. IMHO, they're becoming more and more irrelevant with each release. Once upon a time I might have reccomended mandrake to a newbie, but certainly not now. They've got great assets and a good base. The *potential* to become a good distro. But each release, stupid bugs make it through, and the improvements seem negligable.
Once of their better features is their huge repository of packages -- which is horrendously poorly advertised. You'll find nowhere in the GUI's or desktop a place to access their 'contrib' repo which is the equivalent of our extra, and contains a huge amount of packages. Also an important point for mandriva has been mandrakeusers.org/mandrivausers.org, which has been a huge community offering great support for newbies to mandrake, rather than directing them into the expensive mess that is known as the mandriva club. Mandriva have totally ignored this resource, and have made no attempt to support this board, upon which you'll find, I have quite a reasonable post count from back in my early days of Linux (mandriva 8.2 was first distro), and continuing on to now. It also exemplifies their (lack of) decent customer support.
The distro has had countless irritating bugs which pervaded through releases, and all sorts of utterly stupid ones that should never have made it through the testing process. They do little to help themselves with this. I've reported countless bugs, and all of them have been ignored for months. On their last release, they included the old rt2500 module, which at the time, hard locked SMP machines, and made my mandriva unbootable as it was loaded on boot. I filed a bug, marked it as high priority and it was utterly ignored for more than 6 months, so much so I had forgotten about it. Other bugs and emails have suffered a similar fate.
It's GUI tools, have become a complete mess, for example wireless, in 2006 release, was absolutely horrendous to configure, and had no support for WPA -- wpa_supplicant wasnt even on the CD's so people could configure it manually.
It's good to see they're finally ditching their old desktop theme, which they dragged on for far too long. It's always been absolutely hideous.
Their business model emphasises the 'club' far too much, making it difficult to even find a download on their site for the standard version, which has "Free" tacked all over it, as if to try and make you feel like a cheapskate. Doesnt help how they change their release cycle frequently either.
The stupidity of Mandriva just confounds me. PR like this does nothing to help them. They criticise the developers for not providing a 2.6 kernel that is stable. Maybe mandriva should look in their own backyard, and offer a distro that's remotely stable. Last time I used it, it had a horrendously old udev, hotplug, and a very slow hardware detection system. It still used bootsplash, which has been unmaintained for over two years, and included supermount, which Con Kolivas has disowned and again, has abandoned for years. They're hardly doing themselves favours patching their kernels with this out of date crap. Nor do they update them, I dont see mandriva offering updates to newer ones, which would no doubt fix many of the reported issues.
Alternatively they could do what other distros do and pitch in and help. Many of the kernel developers are also employees of other vendors, or have an important part in other distros, such as Daniel Drake and Robert Love. It'd be great for mandrake if they employed a kernel developer, because it's clear THEY are the ones who are the idiots.
I have no idea how they made it out of their bankrupcy, with the lacklustre state of their miserable distro, I think their days are numbered, unless they do something to change around their image and fix their product.
ok, im done.
James

Get Reporting Statistic - Not Ready Resources

Hi All - I have a script that currently checks for LOGGED IN agents .. If there are none, it goes to a voicemail. We have agents all over the globe and unfortunatly some stay LOGGED IN, but in a NOT READY state. Therefore the call goes into queue, and not routed to the voicemail.
Does anyone know, if I change the "get reporting statistic" to look for NOT READY agents, vs. LOGGED IN agents, does it consider agents on a call "not ready"? Or will it look for agents that specifically put themselves into a NOT READY state?
Thanks
Jeff

Hello Jeff, the agents on an active call will not count for the Not Ready state. When receiving the call (ringing) they will be placed in Reserved state; while the call is connected they will be in Talking state and after the call ends they could be placed in Work state for a while.
HTH
Pablo

(UCCE) CUIC - Interval Boundary & Agent Not Ready

From the db schema handbook:
NOT_READY: Number of seconds the agent was in the NotReady State with respect to the Media Routing Domain, from the last state change, in NOT_READY state with reason code change, or from the last interval boundary.
For example:
Time=12:10:00 Agent NotReady state transition
Time=12:11:00 Agent Ready state transition, AgentEventDetail.Duration=60
Time=12:25:00 Agent NotReady state transition
Time=12:30:00 Interval boundary change, AgentEventDetail.Duration=300
Time=13:00:00 Interval boundary change, AgentEventDetail.Duration=1800
Does that mean that if an agent enters the NotReady state at 1:45 and enters Ready state at 2:15, both the 2:00 and 2:30 intervals will reflect 15 mins?
thanks,
will

As for the Not Ready Value being higher than the sum of reason codes, if you have any codes defined outside of the ones in the report (0-9, 50002, 50003, 50004, 50010, 50020, 50030, 50040, 50041, 50042, 32767, 20001, 20002, 20003), they will not show in the report.
It looks like this is an issue with the way the report is built. The NotReadyTime total is coming directly Agent_Interval, not Agent_Event_Detail, so that should be accurate. From your original screenshot, I suspect that the interval calculation in the report is wrong. It looks like the 30-minute report durations are getting rolled into one interval, while the durations less than 30 minutes get rolled into another. For example, the 18:00 Interval in your first screenshot should likely have 29:21 under Lunch, while the 20:00 interval should have 0:00:37 under Lunch.
I think the culprit is the "Interval" calculation for AuxReason. Any Agent_Event_Detail.DateTime value that's exactly at an interval boundry should be counted in the previous interval. I notice in my Agent_Event_Detail table, that sometimes when Duration=1800, the DateTime is exactly on an interval, and sometimes the DateTime is 1 second before an interval boundary.
-Jameson

Could not turn on Screen mirroring. The output device is not ready or does not support HDCP

i tried it on my tv sony bravia w700b with my new xperia z1
i didnt unlocked my bootloder or i didnt rooted my phone
dont know whats the problem is
'Could not turn on Screen mirroring. The output device is not ready or does not support HDCP'. can anybody able to tell how can I resolve this please?

Have you checked if your device does support HDCP? I looked at https://www.iezvu.com/ezcast.php?l=en but i'm afraid i can't find any detailed specification for it.
If you have unlocked your bootloader this may also be the cause for this issue.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

V4.0 won't start. crashes each time. Had to go back to previous version. Version 4 is just not ready for general release, it is massively messed up. The online fixes here had no effect whatsoever. VERY DISSAPOINTED

tried automatic upgrade from within 3.6.. did not work..crashed upon re-start. tried remove program completely for a fresh install..same thing crash upon V4.0 start up....
Reinstalled 3.6.15...
4.0 is NOT READY for general release. Tried the fixes as suggested here, but they were useless and no help what-so-ever.
Very dissapointing, as I've been using Firefox as my only browser since it was introduced years ago.. this may be the end of the line....VERY DISSAPOINTED

tried automatic upgrade from within 3.6.. did not work..crashed upon re-start. tried remove program completely for a fresh install..same thing crash upon V4.0 start up....
Reinstalled 3.6.15...
4.0 is NOT READY for general release. Tried the fixes as suggested here, but they were useless and no help what-so-ever.
Very dissapointing, as I've been using Firefox as my only browser since it was introduced years ago.. this may be the end of the line....VERY DISSAPOINTED

"the system is not ready"

hi
i working in web project and and no error in compilation but once the project
running get this message:
07/03/08 00:20:42 Error initializing server: IO Error: The device is not ready
07/03/08 00:20:42 Fatal error: server exiting
Process exited with exit code 1.
i don't know the problem in RAM or hard drive or what
but i have 1GB RAM and good free space
please , can any body help me?
thanks

Frank
............ welcom and thankyou, I'm sory for late
infact i dont try another unzipining JDeveloper
but every project i try to run same error
i will try new unzipping and comeback again
thankyou Frank again

Error while trying to create a Solr collection (java.io.IOException: The device is not ready)

Hello, everyone.
I'm trying to create a .cfm document that will erase a specific Solr collection and then re-create it, index it, and optimize it.
The delete works flawlessly.
Unfortunately, creating it isn't working, at all. I get the following message:
Unable to create collection publicsearch - An error occurred while creating the collection: java.io.IOException: The device is not ready.
This is a Windows 7 server running Apache and CFServer 9.0.1 (the version before Verity was cut.) I'm not getting any more details than the one error message. Any idea of what could be causing this? I've Googled this and I'm seeing a lot of issues similar, but not quite what I have happening.
Thanks,
^_^

Nevermind.. no one bothered to inform the developer that the path to the collection AND the path to the directory that the collection is for are different on this other server.
Fixed.

BADI Error: Field GOITEM-ACCT is not ready for input ? HELP!

I get this error message when testing my BADI in the MIGO Transaction. The BADI is the MB_MIGO_BADI. It is from the Line_modify method. Here is the entrie message:
BAdI: Field GOITEM-ZZREG_ACCT is not ready for input. (Change is not copied over)
Message no. MIGO050
Diagnosis
The contents of field GOITEM-ZZREG_ACCT have been changed in BAdI MB_MIGO_BADI (method LINE_MODIFY). The field, however, is not ready for input, so the change cannot be copied.
In method LINE_MODIFY, only the contents of fields that are ready for input can be changed.
The field is defined correctly in the screen as an input/output field - so it does not relate to that.
HELP!!!!!

Yes - I have reviewed all of the code and I never do any modify to the screen attributes of a field - although it sure acts like it. The screen lets me put in data and it stays there up until it finishes the method line_modify. The error is when i press return after i enter the field- it completes the BADI method and then goes to the main program and does field validation and always comes back with some internal table field called "work" with a value of 0 and it should be a value of 6.
Thanks!
Scott

"This drive is not ready for use; it's door may be open ..."

Hi.
I recently updated to itunes 7, and then had an issue with a corrupt file on the i-pod (which resulted in chkdsk hanging itself at 27%, always). So I restored the i-pod and that took care of that - chkdsk now says it's fine.
However - it is also empty. My machine and i-tunes recognize it fine upon start-up; however, a short while into a full synch to get my library back on the i-pod, I invariably get the following error message:
"The drive is not ready for use; it's door may be open. Please check drive \Device\Harddisk\DR 3 and make sure that a disk is inserted and that the drive door is closed." The message comes with the options "cancel, ignore and continue", yet the latter two don't make a difference, and even if I choose cancel, itunes keeps trying until it eventually crashes.
This always happens after itunes has synchronized about 1.13 GB (out of 18.55 available).
As far as I can tell, both my system and the iPod are up to date (itunes and windows update say so, anyway). E: is unequivocally and exclusively allocated to the i-pod; changing the settings from "optimize for quick removal" to "optimize for performance" has made no discernible difference.
Any ideas would be very much appreciated.
Thanks.
DELL Inspiron 4150 Windows XP

Hullo ...
let me follow up on this again. I've followed your advice, de-installed spybot, no change. I looked through the windows support help base, nothing. While trying out different things, I started getting a "delayed write failed" message, and I did some things they suggested (including adjusting the registry - me, adjusting the registry!)and it went away, and now all I get is the "open door" message again.
That is: everything works absolutely fine, I plug in the i-pod (latest version i-tunes and i-pod is up to date), it's recognized instantly by the explorer as well as i-tunes. I've run all scans you can possibly run on it, and it is fine (no corrupt files, nothing). I've restored it twice through i-tunes, twice through the explorer. I've changed the drive letter.
It starts the synch fine (it's still almost empty after the last restore), but at some point, I get the error message. Interestingly enough, *up to* that point, it'll synch fine - I can disconnect it and play on it whatever's been synched thus far. I can also modify my i-tunes settings and preferences, all of which i-tunes will recognize and adhere to. It is just unwilling to put more than 1GB of stuff onto my 20GB i-pod.
Something I've noticed is that it is sometimes indicating apparently faulty charges in the beginning (though that is quickly corrected once the synch starts), as in, it'll recognize a certain amount of audio files, but also claim a random amount of "other" files, which should not be there (apart from the 30MB or so of genuine i-pod software).
Anyhow. I haven't seen any solutions to this on the forums or in the apple help files, but people appear to be having this problem still. Any ideas or input would be very much appreciated ...
Thanks.

"The drive is not ready for use; its door may be open. Please check drive \

3G IPOD problems which are driving me mad and i can see others have had the same problem but i can't find any solution written down.
Basically my IPOD either freezes after a couple of songs or it downloads about 6Gb (of 40) and the freezes with the following message:
"The drive is not ready for use; its door may be open. Please check drive \Device\Harddisk2\DR6 and make sure that a disk is inserted and that the drive door is closed"
I've tried re-setting, installing etc but no luck. Any suggestions/solutions?
Laptop - Packard Bell Notebook Windows XP

Hmmmm. I'm not sure how to explain this.
You need to change the Drive Letter for your iPod.
You should be able to connect your iPod then open Windows Explorer and right click on your iPod(which seems to be Drive E:) and change it to a different letter (like H).
If you haven't enabled disk use for your iPod it probably won't appear in Windows Explorer.
To enable disk use: connect iPod, open iTunes. Open Preferences and select the iPod tab. Choose "enable disk use."
Once you've done all that, try resyncing.

C4440 scan error Operation could not be completed (error 0x00000015). The device is not ready.

I have updated, restarted, etc. Sometimes when scanning I do not get this message, but more often I do.
When scanning I receive the following message:
Error message when scanning "Operation could not be completed (error 0x00000015). The device is not ready.
Please help!!

Hello, nylamama:
Follow the steps in this document, and you should find the help you need to resolve the error.
Let me know if this helps, and thank you for contacting HP!
Cheers,
SN_63 (Saint Nana): I work on behalf of HP.
Click the thumbs up icon if you want to say "Thank you." To help others on the forum, select "Accepted Solution" on the post that solves your problem.

Scanner Operation could not be completed (error 0x00000015). The device is not ready.

When trying to scan I keep receiving an error message. Operation could not be completed (error 0x00000015). The device is not ready.
What does this mean? I have been able to scan without problems in the pas, with Windows 7 Fax and Scan.
Printer : HP PhotoSmart 2710
Computer: HP Pavilion zd8000 (originally XP)

Welcome to the Forum, losblanco,
I checked on this for you and I think your answer is here:
http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/operation-could-not-be-completed...
If you don't find the solution there,
or if you need help for any other reason,
please come back and we'll take another shot at it!
Good Luck!
I hope this helps.
Click The Kudos Star to say Thanks!
Set in Reply “Accept as Solution” if it’s fixed!
Kudos are Earned!
Kind Regards,
Dragon-Fur

Counter is not ready

Similar Messages

Maybe you are looking for