Counting and Reading Messages:

Hi
I am putting some messages in a queue and i am reading them explictly.
1)when i am reading the messages from queue,in which order i will retrieve
i.e first in last OR last in first OR in a random order.
2)Is there any method to retrieve how many messages are there in a queue.
thanks in advance .......

Are you using Nokia PC Suite 7.1.18.0, or the N Series Suite 2.0?
N Series suite doesn't contain the Communication Centre application
So, download the Nokia PC Suite 7.1.* from the Nokia site and use that the manage SMS:
http://europe.nokia.com/get-support-and-software/download-software/nokia-pc-suite/download
Message Edited by malakhi75 on 13-Jan-2009 12:22 PM

Similar Messages

How can I set up my mail accounts to sync sent and read messages automatically?

I'm not sure how to set it up so my flagged emails, sent messages, and read messages will show the same in my MacBook Pro and my MacBook Air. This seems like it would be a simple problem to fix, but I can't figure it out.
Thanks!!

Welcome to the Apple Community.
This type of service is offered by IMAP email accounts such as the me address that is associated with your iCloud account.
Are you saying it isn't working or are you trying to add a third party address (ie gmail, yahoo etc etc) to your mail account and expecting it to work like an IMAP account.

Message app, any way I can back it up and read messages on other than my iPod Touch (4g)

Yeaaaaaaaaaaaah.
So I want to get my messages onto my computer (as in transfer convo's), but not willing to pay anything.
Because the messages are sent to my Apple ID (my email) is there some sort of way of accessing them ?
Frankly i think it's quite mean that I can't access my OWN messages on my computer with out having to pay anything, i don't know if this applies to iPod touch but i heard that people can download a program for them to read and transfer messages onto their computer for around $20
I also backed up my iPod, is there some place I can access them?
Or is Apple going to be extra and make me screen shoot my conversations to save me money?
Thanks

Very very unlikely
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
- You can also wipe/erase the iPod and have to iPod play a sound via iCloud.
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

Display number of unread and read messages in mailboxes?

Hiya,
Can I get Mail to list the total messages in a mailbox in the column on the left? I have a smart-mailbox for "flagged" items and I'd like to be able to see how many things are in it, while I'm sorting things in my inbox.
There's an unanswered post here, "Display number of messages in mailboxes?" that's been archived. Is there an answer to this?
I suppose I could install Dockstar or Docktopus and try to customise Mail's dock icon. But I don't don't know if they can do "non-read" messages, and I keep the dock hidden normally. Can Mail do it easily for me, with your help?

The Dockstar folks were nice, but said they can't do this yet. Anybody else?

No Syncing of Flagged Messages and Read Messages??

I use Mail to connect to several POP email accounts, where I also have several Smart Email Boxes setup. The message flags don't seem to be synced across the two computers. For example, if I flag a message on the G5 then sync it, my mini won't show the message as flagged when I sync on the mini.
...same goes for read messages. Even when my messages are read on my G5, they all appear as unread when I sync up on the mini. This has been a hassle, as I have to spend time flagging messages on each computer, and remembering which ones I have read previously.
Any suggestions? (would be so greatly appreciated).
Andy T.

.Mac Sync does not synchronize mailbox content, which is what you appear to be expecting it to do. POP3 mailboxes aren't designed to be synchronized - you need to take a look at IMAP technology if you want your mail to be synchronized.
See these documents:
http://docs.info.apple.com/article.html?path=Mail/2.0/en/ml944.html and
http://docs.info.apple.com/article.html?artnum=25275

IMAP Deleted Messages AND Unread Messages

I've read quite a few threads about two seemingly persistent problems using Mail and IMAP servers: a) Messages deleted within Mail "reappear" in the client's in-box, and b) messages read (and marked as read -- no blue dot) "reappear" as unread messages (this latter problem occurs for me, even if moved to a folder on my IMAP account). I have to admit that I've gotten lost in the twists and turns of these discussions and I'm reluctant to start trying things that may make matters worse.
I've tried to extract the right things to do here -- and, so far, only have checked that I am indeed saving deleted messages on the server.
May I ask: In summary terms, are there a few standard fixes for making deleted messages go away and read messages stay that way? Thanks!!
PB 12" Mac OS X (10.4.7)

I'm using Mail 2.1 (752/752.2) talking to a Cyrus IMAP server running on the same machine. Messages are kept on the server. I have a GnuPG mail plugin. Ever since the last update of Mail I've had the problem of random "read" messages returning to the "unread" state, and not just in INBOX, but in other folders, all on the server. I've read them, did "Synchronize" and they soon show up as "unread" again. I've read them, quit Mail, restarted Mail, and they are "unread" again. Sounds like what other people are seeing.
So I wrote a program that talks directly to the IMAP server to see what it thinks about the "read" status. Sure enough, messages that have a sitcky "unread" state do not have the IMAP "\Seen" flag set. In other words Mail is not setting this flag for some reason. (I've check this several times, before and after Mail is supposed to mark a message "read," after quiting Mail, etc., and the "\Seen" flag is never set.)
If I use my prober program to manually set the "\Seen" flag on a message, then it stays "read." That message never again pops to the the "unread" state; however, random new messages get stuck in the "unread" state. So far the only way I have been able to mark these sticky messages as "read" is to talk directly to the IMAP server.
I believe this strongly indicates the problem lies in Mail itself and not the IMAP server. I believe there was some regression with this new version of Mail because I've never had the problem before. To conclusively prove Mail is at fault, though, I would have to eavesdrop on the communication between Mail and IMAP.
--Mike Zuhl

I am getting messages that I can't download and read .pdf files since I have the wrong Adobe reader. I know about their security disasters of course, but I downloaded the latest version of Adobe Reader from the Adobe web site and I have other ,pdf file re

I am getting messages that I can't download and read .pdf files since I have the wrong Adobe reader. I know about their security disasters of course, but I downloaded the latest version of Adobe Reader from the Adobe web site and I have other ,pdf file readers as well, and for some reason they won't work either. I have 5 computers running top end processors and RAM. By this I mean I have one, this one which I am using that has an AMD Phenom Black 3.2 Quad-core with 8 GBs of Corsair top DDR2 RAM, my other two AMD have either an Athlon II triple core with 4 GBs of DDR2 Corsair RAM, one with the Phenom X4 965 3.4 GHz Quad-core with 8 GBs of their best DDR2 RAM, and two Intels with the i7 920 Processors using the triple channel 1366 socket processors and one with 8 GBs of low latency DDR3 RAM and the other with 4 GBs of the same RAM. I am getting the message on this one, which has a fresh install of XP Pro X64 operating system, as do the other 4 as well. I have run Avast Business Pro Anti-virus on this one, which I am getting the message on with a single result which I deleted, and also both Spybot Search and Destroy, which came back clean as well as Malwarebytes Antimalware, which got a lot of tracing cookies now removed, and SuperAntiSpware which also found a few cookies also now deleted. Can you tell me what I need to do to get these files to show as .pdf files rather than as a clean blank page. One other issue is that I wish to know how to turn off my downloads so they are saved and Mozilla will give me the option of returning them instead of me losing them all together as it does now. Thanks for your assistance. If there is another Adobe reader I should download and install, could you provide me with the link to it? I appreciate your assistance here
== When I download and try to read a .pdf file and when I am asked to turn off all Firefox files and if I do, I lose them since I need to know how to save them without rebooting my computer.

Brilliant! Problem solved! Thanks so much.

Buffered event counting. Why can't I explicitly sequence generating the Sample Clock Pulse and reading the counters?

At irregular occasions I need to grab counts from several counters, and buffering the counts must be done simultaneously for all counters. I'm modeling my approach after zone.ni.com/devzone/cda/tut/p/id/5404 which someone kindly pointed out in an earlier thread. However, that example only uses one counter, and you can't test the synchronization with only one counter, so I am using two counters configured the same way, and they're wired to a single benchtop signal generator (for example at 300 kHz).
What I want to do, I can test in a loop with a somewhat random wait in it. I want to drive a hardware digital output line high for a few ms and then low again. The hardware line is physically connected to terminals for my timing vi's Sample Clock Source and so will cause them to buffer their counts for later reading. After I pulse this line, when I know new good buffered counts await me, I want to read both my counters. If their bufferings are simultaneous, then each counter will have counted the same number of additional counts since the last loop iteration, which I can check by subtracting the last value sitting in a shift register and then subtracting the two "additional counts" values and displaying this difference as "Diff". It should always be 0, or occasionally +1 followed immediately by -1, or else the reverse, because buffering and a count could happen practically at the same moment.
When I do this using a flat sequence to control the relative timing of these steps, so the read happens after the pulse, the counters often time out and everything dies. The lengths of time before, during, and after the pulse, and the timeout value for the read vi, and the size of the buffer and various other things, don't seem to change this, even if I make things so long I could do the counting myself holding a clipboard as my buffer. I've attached AfterPulse.vi to illustrate this. If I get 3 or 10 or so iterations before it dies, I observe Diff = 0; at least that much is good.
When I use two flat sequences running in parallel inside my test loop, one to control the pulse timing, and the other to read the counters and do things with their results, it seems to work. In fact, Diff is always 0 or very occasionally the +/- 1 sequence. But in this case there is nothing controlling the relative timing such that the counters only get read after the pulse fires, though the results seem to show that this is true. I think the reads should be indeterminate with respect to the pulses, which would be unreliable. I don't know why it's working and can't expect it to work in other environments, can I? Moreover, if I set some of the pulse timing numbers to 1 or 2 or 5 ms, timeouts start happening again, too. So I think I have a workaround that I don't understand, shouldn't work, and shouldn't be trusted. See SeparateSequence.vi for this one.
I also tried other versions of the well-defined, single sequence vi, moving the counter reads to different sequence frames so that they occur with the Sample Clock Source's rising edge, or while it is high, or with the falling edge, and they also often time out. I'll post these if anyone likes but can't post now due to the attachment limit.
Here's an odd, unexpected observation: I have to sequence the reads of the counters to occur before I use the results I read, or else many of the cycles of this combine a new count from one counter with the one-back count from the other counter, and Diff takes on values like the number of counts in a loop. I though the dataflow principle would dictate that current values would get used, but apparently not so. Sequencing the calculations to happen after the reads fixes this. Any idea why?
So, why am I not succeeding in taking proper control of the sequence of these events?
Thanks!!!
Attachments:
AfterPulse.vi ‏51 KB
InSeparateSequence.vi ‏49 KB

Kevin, thanks for all the work.
>Have you run with the little execution highlighting lightbulb on? -Yes. In versions of this where there is no enforced timing between the counter and the digital line, and there's a delay inserted before the digital line, it works. There are nearly simultaneous starts on two tracks. Execution proceeds directly along the task wire to the counter. Meanwhile, the execution along the task wire to the digital high gets delayed. Then, when the digital high fires, the counter completes its task, and execution proceeds downstream from the counter. Note, I do have to set the timeout on the counter longer, because the vi runs so slowly when it's painting its progress along the wires. If there is any timing relationship enforced between the counter and the digital transition, it doesn't work. It appears to me that to read a counter, you have to ask it for a result, then drive the line high, and then receive the result, and execution inside the counter has to be ongoing during the rising line edge.
>from what I remember, there isn't much to it. There really aren't many candidate places for trouble. A pulse is generated with DIO, then a single sample is read from each counter. -Yup, you got it. This should be trivial.
>A timeout means either that the pulse isn't generated or that the counter tasks don't receive it. - Or it could mean that the counter task must be in the middle of executing when the rising edge of the pulse arrives. Certainly the highlighted execution indicates that. Making a broken vi run by cutting the error wires that sequence the counter read relative to the pulse also seems to support that.
>Have you verified that the digital pulse happens using a scope? -Verified in some versions by running another loop watching a digital input, and lighting an indicator, or recording how many times the line goes high, etc. Also, in your vi, with highlighting, if I delete the error wire from the last digital output to the first counter to allow parallel execution, I see the counter execution start before the rising edge, and complete when the line high vi executes. Also, if I use separate loops to drive the line high and to read the counter, it works (see TwoLoops.vi or see the screenshot of the block diagram attached below so you don't need a LV box). I could go sign out a scope, but think it's obvious the line is pulsing given that all these things work.
>Wait! I think that's it! If I recall correctly, you're generating the digital pulse on port0/line0... On a 6259, the lines of port 0 are only for correlated DIO and do not map to PFI. -But I'm not using internal connections, I actually physically wired P0L1 (pin 66) to PFI0 (pin 73). It was port0/line1, by the way. And when running some of these vi's, I also physically jumper this connection to port0/line2 as an analog input to watch it. And, again, the pulse does cause the counter to operate, so it clearly connects - it just doesn't operate the way I think it is described operating.
For what it's worth, there's another mystery. Some of the docs seem to say that the pulse has to be applied to the counter gate terminal, rather than to the line associated with the sample clock source on the timing vi. I have tried combinations of counter gate and or sample clock source and concluded it seems like the sample clock source is the terminal that matters, and it's what I'm using lately, but for example the document I cited, "Buffered Event Counting", from last September, says "It uses both the source and gate of a counter for its operation. The active edges on the gate of a counter is used to latch the current count register value in a hardware register which is then transferred via Direct Memory Access...". I may go a round of trying those combinations with the latest vi's we've discussed.
Attachments:
NestedSequences.png ‏26 KB

I bought a used PowerMacPC G5. I can burn and read DVDs, but I can't read or burn CDs. The CDs are not even recognized. After the drive searches for a while, the CD is ejected without any error messages. The CDs work okay on my iMac.

I bought a used PowerMacPC G5. I can burn and read DVDs, but I can't read or burn CDs. The CDs are not even recognized. After the drive searches for a while, the CD is ejected without any error messages. The CDs work okay on my iMac.
I am running Mac OSX 10.4.11. According to the System profiler the CD/DVD drive is a "PioneerDVD-RWDVR-112D." When I compare the information under this heading, the only unusual difference from my iMac is that the G5 reads "Burn Support: Yes (Unsupported)." My iMac reads "Burn Support: Yes (Apple Shipping Drive)."
Under the System Preferences the options are set to "Ask what to do" when a blank CD or DVD is inserted. Music CD set to open iTunes, Picture CD set to open iPhoto, Video DVD set to open DVD player.
Do you have any suggestions?
Thanks, Jack

Hi Jack, great help so far!
Internal...
http://eshop.macsales.com/static_pages/Framework.cfm?page=superdrive/sdl_powerma c_g5.html
External be sure it's Firewire & not Bus powered...
http://eshop.macsales.com/shop/firewire/optical-drives/

Acrobat and Reader XI getting "stopped working" error message when closing

Every computer running Windows 7 and Reader or Acrobat in our office is having an issue where the Windows error message "Adobe Reader/Acrobat has stopped working" appears as the user is exiting a PDF. It doesn't happen every time but it happens fairly often and appears to be happening on each of the 5 workstations currently running Windows 7 and either Acrobat or Reader XI. When trying to move the PDF into another folder after this happens an error message comes up stating that the file is currently open and can't be moved.

Hey emmaw7542582,
Could you please try installing Adobe Reader DC (the latest version) from the below mentioned link:
Adobe Acrobat Reader DC Install for all version
Then, try opening those PDFs again and see if the same message appears.
If that does not resolve your problem, then please share the screenshot of the error message.
Hope to get your response.
Regards,
Anubha

Why is my iPod touch prompting me to restore to the factory settings? Some of my apps have stopped responding. Is this why? I plugged my iPod touch onto my iTunes account and a message popped up saying that iTunes couldn't read the iPod

I plugged up my iPod touch to my iTunes library and it said that it couldnt recognize the iPod and the message told me to restore my iPod? Why would it prompt me to restore the factory settings? Also if I restore the iPod will it erase all of my music even though my music is in my library?
Some of my apps stopped working would this be the reason I need to restore my iPod? I am scared to restore the settings and lose all of my music.
I also put all of my apps in the utility folders, would this have anything to do with my iPod needing to be restored?

Becasue something got corrupted on the iPod. It happens sometimes. Just restore the iPod to factory settings/new iPod and then try restoring from your backup.

How can I download and read a SWF file on IPad 2? The message returned is that Safari cannot download that file

How can I download and read a SWF file on IPad 2? The message returned is that Safari cannot download that file

SWF files are flash files, which are not supported on the iPad : http://www.apple.com/hotnews/thoughts-on-flash/
If you want to play the file then the iSwifter or Skyfire browser apps might work (they don't work on all flash sites) but you won't be able to download it

Set a variable in Adapter Module and read it during message mapping

Hi guys,
is there any way, how I could set some variable and store its value during the adapter module processing and read back this value in message mapping and use it? Without using a database or files.. I mean, some j2ee storage or something like that..
Thanks for your help,
Olian

Hi guys,
thanks for your answers.. just a clarification, what the problem is.
I need to validate a message in the adapter module, if it's digital signature is valid. If it is, I need to send back to the sender a return code (message) OK, otherwise ERROR. I can't modify the message (or dynamic configuration) as I'm using a WSS in the sender channel. The system doesn't allow me to change anything in the message, so I can't find out in the mapping what the validation result was. I then tried to do the validation directly in the message mapping, but I have some issues there with libraries or what, because the validation code, which works in the adapter module, doesn't work in the mapping java class. So my final thought was maybe I could validate the message in the adapter module and pass the result to the message mapping and then create an appropriate return message (in the mapping). However, I see no way of passing a value there. I'm stuck and have no Idea how to resolve the problem. Any hints guys?
Thanks a lot for your help!
Olian

How do I find and read mail messages on my SuperDuper backup?

I have a new mbp and did not migrate anything from old mbp. I made a SuperDuper backup of old computer so I have data I may need. How do I find my mailboxes and be able to read messages that I need on my my backup. I know I could export mailboxes but that's a lot of work up front. If I can just get to a message when needed on my backup that would be great. Thanks.

Another question - my backup is Lion and new mbp is Mountain Lion - will that be a problem?
Regarding what? Did you try starting from your backup?

Unable to install adobe reader-message :unable to unlock instance count... Please advise. Thx

unable to install adobe reader-message :unable to unlock instance count... Please advise. Thx

What is your operating system & version?
Can you try downloading the installer from http://get.adobe.com/reader/direct/ or http://get.adobe.com/reader/enterprise/ ?

Counting and Reading Messages:

Similar Messages

Maybe you are looking for