Counting Integration scenario in SAP XI

Hi All,
Is it possible to count all message flow (Sender+receiver combination) available in system. I have one case where i want to find all message flow available in XI (not in SXMB_MONI).
I have following question:
1> Can I use Interface mapping for this purpose? ( but Interface mapping is not mandatory in many cases)
2> Is Receiver determination can be used?
3> Is there any other possible way by which I can identify message flow uniquely in Repository or Directory?
Any help will be appreciated.
Regards,
Gourav

Hi Michal,
Thanks for your prompt reply, but still some questions left un-answered.
3> Is there any other possible way by which I can identify message flow uniquely in Repository or Directory?
Should I use combination of Mapping, Integration scenario, split mapping to identify unique message flow because it is very important for me to identify unique message flow exist in system whether it is executed or not.
thanks again for your reply, ur answere really helpful.

Similar Messages

ALE/IDOC and RFC/BAPI Integration Scenarios with SAP DS for ESA v3

Hi,
we are planning two PoCs of Integration Plattforms. One of our major requirement set is SAP Integration into our existing SOA.
Because we also have R/3 4.7 Systems in production, we are planning to test ALE/IDOC and RFC/BAPI Integration scenarios with these Integration Plattforms.
My question is:
We are looking for are smart solution to get a SAP Test Environment, where we can test ALE/IDOC und RFC/BAPI Integration scenarios.
It is possible to do this with SAP DS for ESA v3 or shall we better use IDES for that purpose?
Best regards,
Steven

Hi Abhishek,
This is our scenario. We are doing an integration of SAP HR r/3 system with the CRM system. We need housing information details of the employees which we have in custom infotype 9310 in SAP HR system and we need those details in the CRM system. So am planning out for an ALE/IDOC approach for the integration and gonna maintain the 9310 details in a custom table. In the CRM system, we gonna build a BOL layer for accessing the 9310 details. Also i'm preparing a HLD for this process. I wanna read and go through few same HLD's before i submit my proposal to my client. Please suggest me and help me out.
Thanks in advance.
Regards,
Arunmozhi.

Integration Scenario within SAP Netweaver

Hi All,
I need more information about MDM Integration with other Netweaver components like Portal, BI, XI, ECC and OCI..can anyone send me the links where I can get those related documents...
would be glad if I get the appropriate one...
thanks
Alexander

Hi Alexander
Please refer following blogs for XI Integration
/people/harrison.holland5/blog/2006/11/27/mdm-syndication
MDM-XI-R/3 Integration --->
/people/balas.gorla/blog/2006/09/27/mdm-xi-r3-integration
XI Configuration for MDM Integration - Sample Scenario-->
/people/harrison.holland5/blog/2006/12/20/xi-configuration-for-mdm-integration--sample-scenario
/people/sriram.vasudevan3/blog/2005/09/01/mdm-55-data-distribution-using-sap-xi
Also follow this link on service market place for reference guides and documents
https://websmp201.sap-ag.de/~sapidb/011000358700004121872006E.HTM
Hope this helps

File - File integration scenario in SAP XI 3.0

I am trying a simple file <-> file scenario in XI 3.0 . I am reading file content from an FTP server , having a simple mapping program in XI and then writing it to another foler on the FTP server.
I am completely new to XI , however worked on TIBCO EAI extensively.
I have created the following DESIGN TIME Objects and NOTHING ELSE
1) Two DataTypes , Two Message Types & Two Message Interfaces
2) An interface mapping & a message mapping object( mapping program) to convert b/w the above two message types
I have created the following CONFIGURATION TIME objects and NOTHING ELSE
1) Two Business Services ( Under Service without Party ) , and ve created a communication channel ( adapter type FILE ) under each business service
I am trying to use the Configuration Assistant under Tools menu , the doc says , i just need to select the message types & the rest will be genrated by the wizard. I choose the Business Service , but then what is the "INTERFACE" i have to choose , since nothin appears in the drop down. I tried "Internal Communication" & "Partner Communication" options but got stuck in both when choosing the "interface" object. Ideally i think i need to choose the "internal communication".
Any pointers to what am i missing will be helpful . What are the objects i need to create at Design Time & Config time to achieve the above scenario.

The Configuration Assistant does not work for business services without party. Go to the SLD and create one or two Business Systems and add them to the Integration Directory, then it should work.
Regards
Stefan

Ale master data scenario integration with non sap syetem i.e seebeyound

hi
we have a business process scenario integrating with non sap system (i.e seebeyound)
action code      itemnumber    plant code
a(add)          material1     plant 2
d(delete)       material 3    plant 6
etc
we have upto one million materials assigned to 300 plants
we have to send all the above data to non-sap system (see beyound)
should we go for a custom idoc and setup the rfc configuration for the two sytems.
or can you please help how to go for this scaneriao

this is not one time.it is on daily basis.
please look at this scenario.what i need is how should i go for ale/idoc scenario for this one
Business case for Heiler Part/Plant Interface:
A key function of the Heiler PBC tool is to provide users a choice
between a "Global Catalog View" (e.g. all parts in the catalog) or a
"Local Catalog View" (e.g. the subset of parts in the catalog that have
a Material Master established for the user's plant in SAP). The "Local
Catalog View" is the default condition and encourages users to procure
parts that are on contract for their plant and potentially already
stocked as an inventory item at their plant. Parts that are not in a
user's "Local Catalog View" can only be procured as a spot buy purchase
order, requiring processing by a buyer.
The new Part/Plant interface is required in order for the Heiler PBC
tool to provide this "Local Catalog View" function. The Heiler
Part/Plant table will document what plants in SAP have a Material Master
record established for each part. SAP will maintain the Heiler
Part/Plant table using this interface. When a user performs a part
search in the Heiler PBC tool, the Part/Plant table determines if a part
is included in the user's "Local Catalog View".

Docus about 3rd-party defined integration scenario: SAP Web AS u2013 SAP NW

Hi all,
we have an SAP integration solution which we want to get certified. We are interested in the third-party defined integration scenario: u201ESAP Web AS u2013 SAP Netweaver Application Serveru201C as similar products have this certification. Where can we find technical details/documents about this certification. Is there any sample scenario for this certification that we can use as a template.
Thank you in advance for your help.
Cheers
Jack

Dear 'jackwhite',
The SAP Integration and Certification Center (SAP ICC) has confirmed Uphantis ([http://www.uphantis.com]) as its first u2018SAP Certified in Integration Servicesu2019 partner within the EMEA region. SAP AG has certified Uphantis as its Consulting and Certification Service Partner for Independent Software Vendors. This certification enables Uphantis to implement and supervise the integration of ISV software with SAP solutions. The ISV will then be able to have this integration certified by SAP (u2018SAP Integration Certificationu2019).
Uphantis Integration Services ([http://www.uphantis.com/uis]) is an integration specialist with extensive knowledge in this field. Uphantis integration consultants have been trained by SAP and are certified in many different areas of expertise. This makes Uphantis a unique consulting partner, well acquainted with the requirements for developing an SAP certified solution.
Perhaps we should get in contact?
Best Regards,
KENNY VAN SLEUWEN
Senior Integration Consultant
Uphantis Integration Services
'SAP Certified in Software Integration Services'
I www.uphantis.com/uis
Uphantis | Connecting our future

Integration Scenario with Oracle SOA Suite and SAP

Hi to all
I have the following integration scenario:
The customer have some applications in the integration landscape. All of this applications are integrated with Oracle Soa Suite.
This customer, want to buy SAP ERP (ECC 6.0), and they want to integrate SAP ECC in their infrastructure.
I told to them, that is necesary have Process Integration (PI), by have a services oriented architecture.
But, I want to hear options, possibilities and comments. Where I find information related ?
Thank you very much
Dario

Hi Rodriguez ,
you can use Oracle AS Adapter for SAP for integrating SAP system to oracle .
some step you need to do in SAP ECC side for data transfer - like create TCP/IP RFC connection ,
for TCP/IP RFC config. you can generate program ID in Oracle AS Adapter ..Also Oracle provides a SAP JRFC library for integrating SAP system .
you can find more information in given link -
http://www.oracle.com/technology/products/integration/adapters/dev_support.html
Regards,
Amit Shivhare

To SAP-XI Product Developement... Bug in Integration Scenario, swimlanes..?

Hi,
I am not sure whether such questions can be posted in this forum or not.. but i have no other alternative. If this is not the right forum i will not post such queries again.
I have posted a query reg "Integration Scenario, swimlane diagrams" in XI Forum, but there were no replies to that. So i like to forward the same to the Product Develpment team and like to know if this is a bug or things do work like this..?
I have designed my Integration Scenario in Design Time, imported the same into configuraton time so that the Configuration Objects (Receiver Determination, Interface Determinaiton, Receiver agreements) are automatically created. I tried the sacenario and its working fine.
In my scenario, i have 3 swimlanes corresponding systems, Sys1, sys2, sys3.
In Run1, a connection is made b/n sys1's and sys2's actions. Imported into Configuration, Configuration objects created,(Rx Determination Created) scenario working properly.
In Run2, another connection is made b/n sys1 and sys3's actions (sys1 and sys2 still remain connected). Imported into Configuration, receiver determinaition changed according to the scenario, scenario working properly.
In Run3, the connection b/n sys1 and sys2 is removed and again imported into configuration, but the receiver determination is not changed to cater to the scenario in design time. The old receiver determinaiton is not getting deleted/chaged). The receiver deteminaiton reused instead of being changed, which is incorrect according to the scenario.
Is this a bug in the software or do things work like this only... U can reach me at Siva_Maranani(at)satyam(dot)com
Cheers,
Siva Maranani.

Hello Aamir,
you are right, I don't need virtual receivers for my scenaro and I also don't want to use them.
However, when modelling my scenario with an integration scenario in the design, I'm forced to do this and I would like to know whether there is any way to avoid this.
In order to be able to use a business service on the sender side, it seems I have to select the checkbox 'External party with B2B communication' in my integration scenario. When importing & configuring the scenario in the directory, I am then able to select by business service for the sender side. However, for the receiver side I have to specify a virtual receiver, otherwise I cannot finish the config wizard.
Any more ideas?
Best regards,
Matthias

Unable to Load the Integration scenario into the Integration directory

Hi All,
I am new to using SAP XI.
Require your help on the following issue.
I have built an Integration scenario, added Component Type: Product Version, inserted actions and connections.
I did check for any errors. I found no errors.
When I am trying to load this scenario into the Integration directory its not showing up the scenario in the popup.
Navigation:
Directory > tools> Transfer scenario from repository
The status of Integration Scenario in the builder shows as
"Being processed".
I created the scenario 2 days back.
Can some one help me in this?
Regards,
Meher

Hi All,
Thanks to all who helped me.
michal,divija : Can you please let me know in details how to activate Business Scenario?
I did not create any business process.
Sridhar: I did releases some locks on my process, no luck.
Can you please explain me in more details?
Should I have a process build for my Integration scenario to be activated?
Thanks,
Meher

Adding a new reciever to an existing integration scenario of conf in PI7.0

Hi SapAll.
here i have got a requirement to add one more reciever to an existing integration scenario in Integration Directory(Configuration).
this Integration scenario is for sending the idoc MATMAS.MATMAS05 From 5 Different SAP-R/3 Systems to 2 Recievers.
here iam using 5 different business systems with idoc communication channels for sending idocs and 2 business systems for recieving idocs in file format with file adapters.
so when iam trying to create new reciever detarmination or Interface Determination, it says object already exists.
but i can created reciever agreement without any error.
so can anybody guide me on how to create the Interface,Reciever Determinations without any error.
regards.
Varma

now i just created a new business system with file communication channel
Why have a Business System for a FILE channel? We normaly use Business Component/ Service.
You mentioned IDOC SENDER channels....why? For IDOC we just create Receiver channels...unless you want to specify IDOC packaging.
when iam trying to create a reciever detarmination from one of the existing sender system say like BUS_SENDER2 to new
reciver system ex:NEW_BUS_RECIEVER it says object already exists.
Receiver Determination can have the same BUS_SENDER2 system/ service as sender....but it should not have the same Interface Name....this is where PI is throwing the error.
There already exists a Receiver Detremination with BUS_SENDER2 as source system and the same message interface.
You can reuse the same RD by just entering one more receiver system/ service below the already existing one (in the RD)
In short just search your ID and you will see a RD created with the source details which you are trying to use.
If you want to see a difference, then create a new sender service/ system and then use this to create the RD!
Regards,
Abhishek.

XI Integration scenario for material replication from SRM to SRM-MDM

Hi Guys,
We are working with the following landscape:
SRM Server 5.5
ECC 6.0
SRM-MDM 5.5 SP6
PI 2005_1_700 SP0006
I have a question for you about replication of the material master form SRM EBP to SRM-MDM.
In XI we are trying to configure this scenario. For this we have imported the following XI Content:
- SAP SRM Server 5.5
- SAP SRM-MDM 2.0
We have the following problem; that when tring to configure the this scenario we are getting GUID errors. Probable because some XI content is missing. In the SRM-MDM 2.0 XI content we also see that SRM 6.0 scenario's are avilable in the currenlty imported XI content, but when clicking on 'Edit action' in these scenario's we are getting the following error:
"Software component version with GUID XXXXXXXXXX... does not exists"
Can any one tell me why SRM 6.0 scenario's are availble in the XI content for SRM-MDM 2.0, and which additional XI content we need to import to get rid of these GUID error's?
Becasue of this the configuration in the Integration Directory fails.Transfering the integration scenario to the Integration directory gives a couple of errors: "Unable to load action. Check whether all necessary actions have been released in the integration repository".
Hopefully some of you know what to do, because I am currenlty stuck....... Do we need to import additional XI content, or maybe the Xi content for SRM 6.0. If so where can I get the XI content for SRM 6.0. It is not available on the SAP Support portal as a download.
Thx In advance.
Regards,
Wouter

Hi,
>"Software component version with GUID XXXXXXXXXX... does not exists"
try updating SLD (CIM DATA) with the latest patch available
Regards,
Michal KRawczyk

XI testing POS Integration Scenario

Hi Folks ,
I am new to XI environment and have a query:
I am configured a process integration scenario for sending TLOG to POSDM. Can you pl advice how can I go about testing my config. At present I do not have any POS-GM system running so I was wondering that I will have to put my *.txn file in the "Source Directory" specified folder...
How can I do a test ..pl advice.
thanks!!

Hi sunny,
No problem .........
Please go thru this simple file to IDoc scenario.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/fileToIDOC&
and if you want to explore more about XI .. sure you want to ...then check out the following step by step scenario guide
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/step-by-step+guides
It will be helpful ......
regards
Ashwin

Error in Protocol for Generation of Integration Scenario Configuration

Hi,
If I try to generate my Integration Scenario in simulation or real mode I get the follwoing error allways in the "Generation Statistics" section (last entry):

Error when creating or changing configuration objects 0
If I save it and check it - no errors could be found. Any ideas?
Regards,
Christian

Hi Christian,
you working with SAP software
> Error when creating or changing configuration objects 0
means:
zero errors...
Regards,
Udo

Webinar: How to implement secure scenarios with SAP NW PI 7.1

SAP Intelligence Platform & NetWeaver RIG APJ Expert Call
Dear valued SAP Experts,
Next SAP Intelligence Platform & NetWeaver RIG Expert Call Session will take place on Tuesday, August 18.
The SAP Intelligence Platform & NetWeaver RIG Expert Call Sessions are designed to support consultants, partners and customers during their implementation projects. The sessions cover all different aspects of SAP NetWeaver and are aimed at
thus provide knowledge which is not available via standard training courses. The session duration is typically 60min and includes questions and answers.
Tuesday, August 18, 2009:
How to implement secure scenarios with SAP NetWeaver Process Integration 7.1
Time: 2.00 - 3.00 p.m. Singapore Time (UTC +8)
This event will feature Makoto Sugishita with the SAP Intelligence Platform & NetWeaver Regional Implementation Group.
Makoto provides the following abstract:
In this session you will learn more about the core security concepts that are provided with the service-oriented architecture (SOA)
management capabilities in SAP NetWeaver Process Integration (SAP NetWeaver PI). This session will cover main use cases and
supported scenarios of secure SAP NetWeaver PI deployments.
SAP Connect Link: https://sap.emea.pgiconnect.com/I016095
(no passcode needed)
Dial in:
For dial in details please register here http://www.surveymonkey.com/s.aspx?sm=EFeuZl9PxrwKOW5i5W556g_3d_3d
Kind regards,
Sarma Sishta
SAP Intelligence Platform & NetWeaver RIG APJ

hi,
I'm making this a sticky thread till August 18 so it will have better visibility
Regards,
Michal Krawczyk

Interface Mapping for enhanced Receiver Determ. in Integration Scenario

Hi guys,
Defining Integration scenario is a pleasant way working with XI.
But how to define the step "enhanced receiver determination" via message mapping in a scenario?
has anybody come along to this issue?
Kind regards
Jochen

hi,
You use an enhanced receiver determination to have a mapping program determine the receivers of the message dynamically at runtime. Instead of creating the receivers in the receiver determination manually, you assign a mapping to the receiver determination and this returns a list of receivers at runtime.
A typical usage case is if you do not yet know the names of the receivers at configuration time. In this case, you can define a mapping program, for example, which reads a list of receivers from a table or from the payload of the message at runtime.
http://www.****************/Tutorials/XI/RecvDetermination/Enhancement.htm
http://help.sap.com/saphelp_nw04/helpdata/en/43/a5f2066340332de10000000a11466f/content.htm
Edited by: murali krishna on Sep 1, 2008 5:49 PM
Edited by: murali krishna on Sep 1, 2008 6:03 PM

Counting Integration scenario in SAP XI

Similar Messages

Maybe you are looking for