Counting order line items in a sales cube

Hi,
How best can one generate a report against an SD cube to count the total number of order line items?
Will a count ikey figure in the cube necessarily be a count of the sale order line items? What if you needed to count the orders and not the order line items?
Thanks

Hi,
since I am interested more in the order line item, onyour point:
"to get the line item count, there is standard key figure in 2LIS_11_VAITM extractor, which returns the number of line item count. That should count the number of line items"
What is the name of the standard key figure you are referring to?
What if this is not in the data target that it is being reported against?
An easier way to to get this count in the report without having to modify the Multiprovider?
Thanks

Similar Messages

Due to deleted Sales order line items and Archived Sales order is still showing as Incomplete in BW as Open Order reports because of Incorrect SAP R/3 Rejection Status("A") in VBUP table.

In a archived saler Order user had deleted Line Item and completed overall sales order. Now this sales order is archived, but it is stll appearing in BW report as open order because of deleted item with rejection Status is maintained as “A” (Not yet Processed).
We want to change this status from "A" (Not yet Processed) to "C" as completed.
I have tried to reload Archive data but due to some limitation I was not able to do it. Also I feel this will like this s not the proper way to do it.
Could you please help me to correct way to do it???
Thanks in advance....

Hi Vaibhav,
If you can get the list of Sales orders which has deleted line items and force completion status. You can manage them in BI via lookup or navigation attribute.
Just my views I am sharing .
Thanks,
KDJ

Sales Order Line Items

Hi All
I am trying to load sales order line items into a cube using the datasource 2LIS_11_VAITM.
The only cube that I coulkd find in Business Content that seemed remotely appropriate was 0SD_C03 so I copied it and used it as a template. However I am finding that its not a very good fit.
It contains a number of characteristics that are not supplied by 2LIS_11_VAITM such as value_type, version etc. Also a number of the key figures dont look right. eg Quantity in Base UOM whereas the datasource supplies quantity in Sales units.
My question is whether 0SD_C03 is the correct cube for sales order line items. If so should I be converting the key figures to those specified in the cube and also enhancing the extractor to supply the missing characteristics. Or is there a better cube to use as a template?
Please dont say it depends on what the user wants because I dont think they know what they want and besides its Xmas and no one is here.
Regards
Asif

KWMENG = order qty
UMVKN = Denominator
UMVKZ = Numeretor
Qty in BuOM = ( UMVKZ / UMVKN ) * KWMENG
You can also do keyfigure conversions "on the fly" in BEX. See this howto to configure this. Especially handy when your datasource does not contain numerator and denominator info.
[http://wiki.sdn.sap.com/wiki/display/BI/Defineunitofmeasureconversionsin0MATERIALdefinition|http://wiki.sdn.sap.com/wiki/display/BI/Defineunitofmeasureconversionsin0MATERIALdefinition]
note: read also the comments from the link above, because the step-by-step solution is not complete. I implemented it several times and it works like a charm.
grz,
Rutger

Third Party GRN Posting Date to be Copied to Sales Order Line item Billing Date

Hello Experts
I have a client requirement where in they want to bill line items in the sales order ( third party process ) to the end customer in sync with the GRN posting dates happened in the PO
For EG if GRN happened on 1st July 2014 then Billing Date should come in as 31st July 2014 so when they execute VF04 giving from and to dates as 1st july to 31st corresponding sales order can be invoiced
Actual problem is for suppose if i create a sales order in the month of june say 26th basing on the factory calendar setting and invoicing list maintained in the customer master system defaults the billing date to 30th June 2014 , and the same when user runs VF04 from 1st June to 30th June this sales order shows as due and mistakenly end user invoices the customer ( whereas logical GR would have only received in July 1st )
My requirement is similar to below threads but i am unable to find answer how to copy GR Posting date to Billing Date of the sales order line item
use GR Doc date as billing date
3rd party sales process (w/o ship notif) - Billing

Hi Lakshmipathi ji,
As my requirement is to update the billing date at the sales order line item level , As a process user goes in executes VF04
For Ex
Sales Order Created Date is 1st June 2014 then System Defaults Billing Date at line item to 30th June 2014
Now when i do GRN suppose on 1st July 2014 for that line item , system should trigger a code where in check the posting date of the GRN and override the same in the Biiling Date field of the sales order line item
So when VF04 is run for a month All the GRN which are recieved in the month of July are invoiced in July
Please share me your thoughts do we need to check any userexits from MM side which reads the posting date of GRN and then copies in to my third party sales order
Regards
Hiba

Access control on Sales Orders - Line items

Is it possible to control access to users from deleting line items in sales orders?
(since Julius would reply saying a "YES" or a "NO" , i will complete my question )
If it is feasible to control, could some one make a suggestion on how to do this and help me, please?

Hi Manjula,
Thanks for trying to help and for sending the link, but unfortunately, the link doesnt help me for my question.
the discussion in the link you sent is more on the stock situations that is a mis-match in MD04, when a order line item is rejected then the stock of the line item should be refelcted in MD04 and since this doesnt happen the program was supposed to be eecuted for consistency ==> this was the issue in the link
Now, coming to the problem on hand: If i create a sales order with 25 line items and make a delivery of 22 line items , do a PGI for the 22 and then , i check for the other 3 line items in the Order, realize that the schedule lines in the order are for a date that doesnt meet the date of goods issue of the other 22 items - i delete the 3 line items in the order <== this is what i want to restrict, users shouldnt be able to delete line items of a order that has a subsequent document.
I know i can manage doing this via ABAP based on a few validations on the document flow, but i wanted to know if there is an alternate method of achieving this.
I vaguely remember a situation where i had a user who couldnt enter line items in Purchase orders although he had all required transactions, org,values.......after much research and quite a few trial and error methods i got to a solution by adding/deleting (i dont remember corretly) a parameter value to the user and he could add line items. The curiosity i have is in knowing if there is some parameter value or an other Authorization object, that could help me achieve my objective
Although it could be efficient, ABAP would be my last option
Do keep posting, any help is good help

Sales order line items delivery cancelled but still appears in MD04.

Hi PP Gurus,
In the sales there are 6 line items are there out of which for 1 line item delivery and PGI happened. And for remaining line items delivery got cancelled, but these line items for which delivery cancelled appearing in the MD04, I have rejected the sales order line items but these line items still shows in MD04. Please advise how to remove these line items from MD04.
Thanks and Regards,
SHARAN.

Hi
Pl refer SAP Note : 1166713 for the Problem which says " You have posted goods issue and therefore the delivery requirements should no longer be existing. These inconsistencies can be seen using report SDRQCR21"
Regards
Brahmaji

How to upload sales order line items?

SAPGurus,
For years my customer service department has been asking for a way to upload sales order line items into the VA01 sales order-entry screen.
Many of our customers submit PO's with huge amount of line items, up to 1,000 lines. Our CS reps need to key in the data line by line (or copy/paste
approx 17 lines at once from Excel into the VA01 screen), and we are looking for a way to make this process leaner. One idea we have is that user creates the order header, and then has a way to upload the material numbers and quantities in a separate (newly created Z-transaction) screen in one go.
Obviously rules then need to be built that deal with the various pop-up messages related to e.g. ATP, material status, etc.
Does anyone have any experience or thoughts on how we could achieve this? A way to make the sales order-entry process a bit less time-consuming? Any feedback would be greatly appreciated !
Thank you,
RVS

Take the inputs from this Blog created by SUNIL PILLAI
Sales Documents upload using Standard Direct Input Program in LSMW
G. Lakshmipathi

Unconfirmed line items of a sales order into account in credit management

Hi Gurus
Updated the customer orders via prog. RVKRED09.
There is only one open order for this customer = 720662. My question is: in the credit master the sales value/credit exposure is USD 77.100,00. The order is for USD 105,900.00 .
Found out that line item 20 is not confirmed in the schedule lines. So the value in the sales value/credit exposure equals item 10 and 30. So my 1question is: Where is the setting that does not take unconfirmed line items of a sales order into account in credit management?
Thanks in advance
Regards
Nalini Iyer

Hi nalini
Even though , you create a sales order for that line item , but if that item is not confirmed then the value wont be considered. into credit exposure. .
But once it gets confirmed then the value will be taken into credit exposure..
Regards
Srinath

Route schedule not updated in some line item of a sales order

Hi Gurus,
All order are processed through the EDI interface automatically. Order
XXXXXXXXX for USA customer 40000XXXX is maintained in route reschedule
setup T-code VL52 on specific departure day thursday.
above are line item of same sales order, with same shipping point and route .
Why only some salesorder lines missing the route schedule ??
Please Help
Regards
Abhilash

When you post a query here, you need to have patience until some members go through your post. Please dont expect somebody should respond to you immediately as everybody has their own priorities.
Coming to your query, it could be due to many reasons as per the following note:-
Note 1750978 - Route Schedule does not populate on sales order
Go through the Resolutions given in the above note and check with your system
G. Lakshmipathi

Send all line items of a sales order to IPC along with condition lines data

We wrote some pricing routines in R/3, where while doing he calculations for condition line item, we needed to pull in the material information for previous line items. So we exported vbap and imported it inside the routine to be able to have access to all the line items in the sales order. Now, we need to put in the same kind of logic in CRM/IPC. My question is what would be the equivalent of SAP's(import/export) commands for internal tables in case of IPC. I looked at the BADI CRM_COND_COM_BADI but still do not see how I can send all the line items data to IPC. So I guess, the question comes down to, how do I send all the line items of the sales order (whole VBAP in R/3 terms) to IPC along with the condition line data? Can someone please help?
Thanks

Hi Vaibhav,
If you can get the list of Sales orders which has deleted line items and force completion status. You can manage them in BI via lookup or navigation attribute.
Just my views I am sharing .
Thanks,
KDJ

Need to Split Sales Order Line Item in VA01

Hi,
I have a requirement in which i have to split an order line item for KMAT materail number. system popup configurable screen, here all the required characteristic values have to be selected as per the customer requirement.
After entering all the required customer specific characteristic values, system determines batch automatically. If characteristic values of the Batch matches with the characteristic values of configurable screen selected in the sales order
Here also we have to check the sales Order Quantity (VBAP u2013 KWMENG) and order Confirmed quantity (VBEP u2013 BMENG), if the both the quantities are not same, consider order has partially confirmed.
If Order quantity is partially confirmed, check for the batches with the same characteristic values of the quotation configurable screen and if batch found, system has to create a one more line item and new batch has to be assigned to create line item.
Reduce the order quantity equal to the confirmation quantity in the first line item.
Create a new line item in the quotation, copy all the remaining unconfirmed quantity from the first line item and also copy all the characteristics and properties (item category, schedule line category, business data, item data, and requirement type) and assign the batch to the new line item. System does the availability check automatically and confirms.
In another scenario system doesnu2019t find batch, in this case capable to promise has to trigger directly.
Here we have to check the Order confirmed quantity, if confirmed quantity is equal to zero.
Change the item category of the line item, due to which system determines different Requirement type and schedule line category.
Based on the Requirement type system triggers the capable to promise.
I would lke to know which is the suitable user eixt or BADI to split the line items and what all the tables or structures i need to populate in order to create a new line item successfully.
I have seen many post in sdn but no body gives the right user exit name where i can add new line item.
Regards,

Hi Amit,
Thanks for your reply. In this scenario configurable material is involved. And first Make to Stock scenario is executed to check any material with customer entered characteristics are avialable. If its so it will determine its batch and assigned the quantity.
If zero quantity is assigned or no quantity is assigned then I have to trigger the Make to Order scenario for rest of unconfirmed quantities in order.
I have check it in USEREXIT_MOVE_FIELD_TO_VBAP but it was of no use. I even tried in USEREXIT_CHECK_VBAP but still no result. I am not sure what all the tables and structures i need to populate there.
Regards,

How to Find Out The Production Order Number For The Sales Order Line Items

Hi All,
I want to know the number of production orders for each sales order line item. I know the sales order number .Can anyone tell me how the tables can be linked to get all the production order numbers for each sales order line item.

I think it depends on your configuration. But check fields KDAUF and KDPOS in table AUFK. or in table AFPO.
Regards,
Rich HEilman

I have a problem regarding sales order line item with confimed quanity

Hi Experts,
I have a problem regarding sales order line item with confimed quanity with '0' with delivery block but confirming the sales order quantity once the order is released from credit check.
The situation arises as per the below scenarios.
Scenario - 1 - When the sales order has two line item - one line item with confirmed qunaity in the schedule line and for the 2nd line item there is no available stock for the Material xxxxxx.
Initially the sales order is created for the line item 2 with confirmed quantity = 0, and having the delivery block = 01 for the Material xxxxxx and the order is set with credit check. Once the order is relased from the credit check. The quanity for the item 2 where the confirmed quantity will be = 0 ( Where it is not changing the confirmed quantity)
Scenario -2- Updating the order qunaity for the line item 2 as (9Pcs) it will goes to credit check and save the order.
Maintain the stock for the line item 2 ( 5 Pcs).
Once the order is released from the credit check. Then for the line item 2 the confirm quanity will be seting to 5 Pcs with Delivery blcok 01.
This should not happen, When the credit check is released even though if it has stock based on the delivery blockl it should set the confirmed quanity to Zero.
Can you please help me how to solve this issue.
Looking forward for your reply.
Thanks and Regards,

Hi,
I agree with your point. In the sales order When the complete delivery check box is enabled where the confimed qty is set to zero, it is fine but when we save the orderr it goes to credit check. Once we release the order using VKM3 where in the sales order the confimed quantity is setting to 5, But it should set to Zero quantity. Quatity should not be get confirmed it should be Zero Quantity.
Further in SPRO - customizing in the deliveries blocking reasons - It has a tick mark in the confirmation blcok. But we dont want to remove the - Confirmation Block tick mark
Please any one can help me if you have any solution to solve this problem.
Thanks and Regards.

Keep Quote line item numbers in Sales order

While creating a Sales order from Quote, SAP always creates line items with 100,200,300...and so on.
If quote has 3 line items say 100,110, & 120 and we create a sales order with reference to this quote in VA01. The sales order line items become 100,200 & 300.
The requirement is for Sales order to also have same line item numbers i.e. 100,110 & 120.
To retain quote line item numbers in Sales order the ABAP change will be in VOFM or user exit?

Hi,
It is not a straight forward thing. Adding data to table XVBAP won't work. It will create inconsistency. There are so many other tables involve here too, like, VBPA, VBUP, VBKD, KONV. There can be other tables too based on how your sales order is configured.
Also, modifying these tables (XTAB, YTAB ) in this user-exit may cause database inconsistency.
Regards,
RS

Change the Profit Center in Sales Order line item's Account assignment tab

Hi Gurus,
I need to change the Profit Center at Sales order Line item in Account Assignment Tab. Currently The Profit center is coming from Material Master for the Line Item's Material as default but I have to change / overwrite that.
Can any body provide me how can i achive that means
Any User exits, substitution or any thing ?
I tried MV45AFZZ but i am not able to find out the right place where I can change COBL-PRCTR.
Sony

Hi
There is perform which moves the values to VBAP field.
This PRCTR field is stored in VBAP (i.e., SO line item table)
USEREXIT_MOVE_FIELD_TO_VBAP
Hope it works.
VVR

Counting order line items in a sales cube

Similar Messages

Maybe you are looking for