Country code issue

Hi,
Recently purchase blackberry 9760 sprint phone through www.e bay.in but phone is lock in country code USA .
So i am unbable use in india so please help us  

MUKESHKUMAR8560 wrote:
Hi,
I have already check with Reliance and the have confirmed me Bands is same for this phone the told me to unlock the country code for phone manufacture.
So please help me 
Now I dont' understand, if they told you the unlock code, do it.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Ship to and Bill to country code issue

    The ship to and bill to on the invoice for proforma is not printing the country if being shipped to France  All other countries print just fine...it is only France that will print (see the example below).  Anyone have an idea as to why?  Customer Master appears to be ok as well....Again this is only for France.
    Example:   Name of Company
                     Address 123 Rue
                     91919 - Bondoufke Cedex
                     Z.I. La XXXXXXXXX
                     F- Bondoufle Cedex (this is how the country prints)
    Edited by: Kimberly Blair on Oct 29, 2010 8:35 PM

    Hi
    It seems in your smartofrm for printing the address of ship to and bill to the function module Address_into_Printform is being used. The function module has some parameters that need to be passed like customer name, number of lines of address to be printed, Street PO Box priority etc. One such parameter is the sending country. If the customer is from FR and the sending country paramter is also FR then the country would not get printed as the function module thinks that for transport within country the address with the country detail is not required. Please change the logic of the smartform by altering the Address_into_printform parameter and leaving the sending country as blank.
    Thanks
    Indranil

  • How to find out the user Country code in flex

    Hi all,
              I want to find out the country code, to load dynamic localization swfs.
      example : my swf file name
                     en_US_res.swf
    by using capabilities.langueage am getting the local user langueage, am not able to find the locale country code. please help me out
    Thanks!!

    Hi Jesudasan ,
    You can know the user details with version management.Please find the
    below procedure to know.
    Go to table->Utilities tab->version->Version management->Compare the previous one .
    Hope this solves the issue,Let me know if you have any issues.
    Thanks,
    Rajani

  • CUCM 8.6.2 Generating CSRs With Incorrect Country Code

    Hi folks, I'm running CUCM 8.6.2.25900-8 on a single cluster (1x pub, 4x sub). My CA certs for the tomcat service are due to expire shortly so I've generated CSRs for all the servers and submitted them to our provider. All but one of the requests went through with no issues but one failed because the CSR specified a country code of 'US'. We are in the UK and the four other servers all generated CSRs specifying C=GB.
    Examining the current tomcat cert or issuing "show web-security" on the command-line of the server who's CSR failed also show 'C=GB'
    Looking at the 'set web-security' command it appears that I cannot change the country code.
    Why is the server generating CSRs with 'C=US'?
    How do I change this behaviour such that they are generated with 'C=GB' instead?

    Surprisingly, it has made it all the way to 10.5(x) with the same info and the same error...
    I did found a method to change it via root access, and you might not require root access, but I can't tell for sure as I would need to look at exactly what the contents of the file that TAC changes, but apparently it's just the platformConfig.xml that they need to change and reboot.
    If that's the case, using the utils import config using pretty much all the same info, except the country, would end up with the same outcome.
    Again, not 100% sure but theory says that should do the trick, you can run that thru TAC if you open the case and see what they think about it.

  • How to prevent users from entering '+' or '0' in front of country code in the phone number field?

    Requirement:
    How can I prevent guest users from entering '+' sign or '0' in front of country-code in the visitor phone number field during self registration?
    Few SMS service providers are not looking for '+' sign or '0' or '00' in front of the international phone numbers to trigger the sms. Providing these values in front of country code during self-registration may fail to deliver the sms to recipient.
    Solution:
    Using a simple regular expression, you can validate the entered phone number during the guest registration. 
    The below regular expression will help you to validate the phone number and allows to register only  when the phone number is not staring with '+' or '0'. 
    ^[1-9][0-9](\d{7}|\d{8}|\d{9}|\d{10}|\d{11}|\d{12})$
    It also performs the below validations.
    only numbers are allowed.
    first digit of the entered phone number should be 1 to 9, so '+' or '0' is not allowed. 
    numbers from 0 to 9 are allowed from the second digit.
    also validates phone number length, the length of the phone number should be 9 to 14.
    Configuration:
    To add the above regex in the visitor_phone number filed, please navigate to ClearPass Guest >> Configuration >> (Pages)Guest Self-Registration >> select the self-registration page and go to Edit >> Register Page >> Form >>  select the filed visitor_phone and set the Validator to " ISRegexMatch" and enter the above regex in the Validator Argument filed as shown below.
    Note:  Edit the Validation Error as per your requirement.
    Verification
    Adding the given regex will validate the phone number and prevent the guest user from registering the phone number starts with '+' or '0'.
    Please find below the sample outputs for your reference.
    Result when phone number starts with '+' or '0'.
    Successful registration.

    Is this a Mac Preview issue?

  • Supplier Conversion - Sites data - Country code

    Hi,
    While doing Supplier conversion from release 11.5.10 to R12.1.3, we see the below value in REJECT_LOOKUP_CODE column of the AP.AP_SUPPLIER_INT_REJECTIONS table:
    'AP_NULL_COUNTRY_NAME'
    As I understand this looks like the program is looking for a Country code. The country code column is a Nullable column in the AP_SUPPLIER_SITES_INT table, so not sure where validation happening. In 11i data, there are records that do not have the Country code set up and we are tying to bring those in to R12. Any one faced this issue, any ideas / work-around?
    Is the program validating the data against any seeded lookups in oracle apps?
    Thanks,
    gg.

    Hi Vidhu,
    Every supplier will have a site meant for different purposes ... at the backend they are stored in AP_SUPPLIER_SITES_ALL table ...
    If you query this table, you can find the list of supplier sites that are enabled for Purchase Site assignment and Payment Sites assignment ....
    i.e.
    Select VENDOR_ID, VENDOR_SITE_ID, ORG_ID, PURCHASING_SITE_FLAG, PAY_SITE_FLAG from AP_SUPPLIER_SITES_ALL
    From Vendor ID you can find the supplier name and number from AP_SUPPLIERS table
    From Vendor Site ID you can find the supplier site name from AP_SUPPLIER_SITES_ALL table
    From ORG_ID you can find the operating unit name from HR_OPERATING_UNITS
    I would recommend enabling the Pay_site_flag for the supplier sites that are enabled for Purchase site flag and assigned to operating unit already .....
    Since you cannot create Invoice for a supplier site, if the site is not enabled for Pay_Site_flag, and you cannot create purchase order for a supplier site, if the site is not enabled for Purchasing_site_flag... hence from business perspective they need a site in every operating unit which is enabled for Pay_site_flag and Purchasing_site_flag ...
    Regards,
    Ivruksha

  • Change the Mobile Country code and Mobile Network code BB sprint style 9670

    I need to have a Sprint BB Style 9670 unlocked & Mobile Country code to use on Indian CDMA networks. It doesn't have a SIM card. Anyone have this problem or can point me to the proper way to unlock it? I chatted with Sprint but they don't want to do anything
    Mukesh

    Hi and Welcome to the Community!
    Please refer to this helpful thread:
    http://supportforums.blackberry.com/t5/General-BlackBerry-Functions-and/Unlocking-your-BlackBerry-Gu...
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Re: Skype To Go - Bonaire country code now no long...

    I have a similar problem for the island of Bonaire, skype to go now says this country is not rcognized. Country code 599 and bonaire does not show up anymore on the country lists.
    Post transferred to create its own new thread; subject/title edited accordingly.

    Hello and thanks for reporting this issue. A report has been sent to the relevant Skype unit
    Note to me: ESTG-4
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • Dial with country code as prefix won't work

    Hey
    The Sony Z1 latest ROM have the issue, it can't dial when the phone number don't have + before the country code.

    jackychen wrote:
    Hey
    The Sony Z1 latest ROM have the issue, it can't dial when the phone number don't have + before the country code.
    If you actually use the country code, it has to be prefixed with +  (or two zeros)
    If you are calling a number in your home network/country and don't want to use the + sign, then omit the whole country code at all.
    It is not possible to call a number along with country code without + or 00 before this code, and this is not some xperia thing, it simply works this way (unless your operator have some different policy but I can only guess about it).
    When everything have failed already, try to read the manual.
    Kudos mean I am helpful. Am I for you? Then support me back

  • Facetime removes country code

    So this is whats happening.  I've got an Iphone 4S with the latest update iOS 8.1.1 and it is always been mine. Lately I've been experiencing a lot of troubles with it (I cannot install new apps - only using my mac to install it through itunes) but what bothers me the most is that facetime is not working properly.
    It was not taking my phone number as a Caller ID / Reach at so what i did was turn it off and on again but this time the phone number it took was my phone number without the country code. So now I have a Facetime number without two of it digits. And what surprises me the most is that is registered. When I call to another iphone it appear this "new" number that does not exist.

    Is this Gen4 AE from your other post??
    How brave are you?? Or how much do you like hackery?
    I have instructions to change the country code.. you will need to solder in a serial console.. are you that mad yet??
    Apple allow me to give you these details.. and delete my posts if I say other minor things..
    Serial Access to airports.
    http://embeddedideation.com/2014/03/dissecting-the-airport-express/
    https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair/new-issue-with-a1355-gen-3-tc
    Once you have serial console access the change is trivial.
    Do you want to be on the bleeding edge??
    Surprise your friends with your hack skills.. !!

  • WLC 5508 multiple country codes, limitations

    Hi CSC,
    Currently we are running 2x 5508 (7.2.111.3) in our Regional DC and all AP's from APAC are connected in H-REAP mode.
    On each WLC the following country codes are configured:
    Configured Country Code(s):
    CN, ID, IN, J2, J3, J4, JP, KE, KR, PH, PH2, TH, TW
    Regulatory Domain:
    802.11a:      -ACEJKNPTU
    802.11bg:    -ACEJP
    We have some sites (mainly China), which facing issues on WLAN recently (slow performance, weak signal..etc.
    RF & power level are 'managed' by WLC.
    After reviewieing some sites with our vendor, the feedback to improve stability/perfromace, was to either run just 1 country code/WLC..or set RF/power level manually for each AP. (which of course would be an admin nightmare!!)
    I havent found the same information on cisco.com & thought connecting AP's from different country's to the same WLC works well (incl. having the WLC manage power/rf)?
    Are there any limitations, when having multiple country codes on same WLC?
    Appreciate your feedback.
    Thanks,
    Stefan

    As far as I remember, every AP with a different country code have different permissible level of power and a regulatory authority board monitors these. So in case you wanna mix the AP with different codes, it will choose the ones with lower power level and operate which might not be to your advantage since the users might want to operate at higher power level. So, you can find out the permissible level of Transmission power and group AP with same level together and get another WLC. Also, run a site survey to check for interference. Might help
    Posted by WebUser Shalini Menon from Cisco Support Community App

  • I am currently in Cameroon, Africa and after arriving here, I added Global services to my plan in hopes to be able to use my phone to call local numbers.  When I dial local numbers in Cameroon, with or without the country code, the call fails.  I suspect

    I am currently in Cameroon, Africa and after arriving here, I added Global services to my plan in hopes to be able to use my phone to call local numbers.  When I dial local numbers in Cameroon, with or without the country code, the call fails.  I suspect it may be that the phone is 3G and this area only supports 2G.  Help!

    cctga,
    We appreciate you taking the time to reach out to us. I am sorry to hear that you are having trouble while traveling. We definitely want to make sure you have all available options. Normally when traveling internationally we reccommend setting up international services prior to leaving. When you added the services did you do so online or with a rep? It would be best to contact our global department in order to troubleshoot any and all issues with services while international http://vz.to/17KseUf.
    Thank you,
    TonyG_VZW
    Follow us on Twitter @VZWSupport

  • WLC 2125 - Country code selection

    WLC Mode: AIR-WLC2125-K9
    Version: 7.0.116.0
    Here is the scenario, we have two WLC, one is located at SG and the other is located at MY (In test stage).
    Both WLC has configured with three Country Codes CN,MY and SG , as well as the Regulatory Domain 802.11a -CS and 802.11bg -ACE).
    Yesterday we did perform WLC failover test and it was successful but we noticed some of the APs country code are incorrect set as before, we are tried into the AP config, and pull up the Advanced Tab and select the Country where the AP is physically located but the weird issue happened whereby there are only one country code available and the other two country code are missing.
    Here is the AP model we used.
    AIR-LAP1142N-N-K9 (CN)
    AIR-LAP1242AG-S-K9 (SG and MY)
    Could someone help to advise what would be the cause how to resolve this issue.
    Thanks in advanced.

    With the -E there are many profiles that can be selected, as most tend to be very close to the same restrictions.
    However I would contact your local regulatory domain group and ask them which country is the same as Mongolia. Explain what you are doing and have them tell you, and get it in writing. that way you are covered on your choice.
    Steve
    Sent from Cisco Technical Support iPad App

  • Foriegn trade Country code in Billing document

    Hi,
    Can any one guide me how the country code is populated in Billing document Header under  Foriegn trade/custom tab.
    As we are facing issue with this, in one billing document with germany ship to party the country code is being populated and   the other billing document with U.S ship to party country code is not populated.
    Thanks in advance.

    Thanks in advance,
    As u said my problem is not with the Transportation and Incompleteness, In the Billing document header level beside the Ship to party address the Country code is not being populated for other than germany customer.
    SAP Help says
    The country key contains information which the system uses to check entries such as the length of the postal code or bank account number.
    The two-character ISO code in accordance with ISO 3166, which is delivered by SAP as a default, is usually used.
    It could also be the vehicle license plate country-code or a typical country key, for example, in Germany the Federal statistics office key.
    The country keys are determined at system installation in the global settings.
    Since the country key does not have to correspond to the ISO code in all installations, programs that differ according to certain values of the country key cannot query the country key T005-LAND1, but have to program based on the ISO code T005 INTCA.
    Please suggest
    Thanks.

  • Country Code Changes

    Hii All
    There has been a notice given that few of the countries(Aby Bhabi, Dubai) codes will be changed wef 1st Jan 2009.
    I have raised this issue with SAP but they do not have any information for that.
    Pls do suggest that in this case do I need to change the code manually or wait for some note from SAP.
    Thanks & Regards,
    Gaurav Manocha

    Hello Mr. Laksmi
    Our client got this information from HM revenue&Customs, we got this notince from them and I have a scanned copy of that. I am not sure whether I can attach that on this forum.
    Some of the country code changes will be
    Abu Dhabi  From DH to AE
    Puerto Rico From PR to US
    Dubai From DU to AE
    etc...
    In this case what do you think that if we only change the master data for these customers will that suffice the purpose.
    Do let me know.
    Thanks & Regards,
    Gaurav Manocha
    Edited by: Gaurav Manocha on Dec 16, 2008 11:20 AM

Maybe you are looking for