Country implementation 40 does not exist for category IT and type 2001
Dear Experts,
I am getting the following error
"Country implementation 40 does not exist for category IT and type 2001".
when I tried to create a leave request. I think the HR Ess configuration is complete.
Kindly, give your valuable inputs, hence I can try & resolve this issue, as I am stuck with this for quite sometime.
Your inputs will be really valuable.
Thanks
Bala
After suffering this same problem and not finding any help or information ANYWHERE, I debugged the process and found that the error is caused by a missing entry in view V_BLPTYPECOUNTRY.
I created a new entry in the view with a blank molga and the error goes away.
The entry I added was:
Category = IT
Data Typ = 2001
Ctry Grouping = (blank)
Class = CL_PT_BLP_IT2001
I hope that this can help anyone having the same problem in the future.
Similar Messages
-
Actual activity price does not exist for cost center / activity type
Hi,
We are trying to upload the time sheet related data(number of hours an employee workred on a project) ect from Non SAP to SAP.
We have used a customized program and have loaded the data from se38.
All this HR data will be saved in CAT2
Later we transfer the time related data into SAP FI/CO using CAT7.
+When tested with a couple of employees time sheets, they got uploaded in SE38 proerly and when transfered it through CAT7 it was properly taking the hour*rate is cost and was reflecting in the respective cost element.
For a few time sheets in SE38 we were getting an error saying that the cost center(100501)/ activity type(EAT001) does not exist for 2010.
Hence we have taken, FY 2010, the cost centes and activity types in KP26 and have given the planned Activity as 1. No planned cost in KP06.
We have run the price calculation forr the FY 2010.
Then we were able to uplaod the time sheets, but when we tried to transfer the data through CAT7, it throws an error saying no activity price exist for cost center 100501/ activity type EAT001. If I ignore the warning an proceed, no amount is being calculated.
When uploaded employee time sheets before, all the cost were getting claculated and were entering into the respective cost elements, but now no amounts are being calculated and it is taking Zero.
When checked the previous years data i.e, 2009 all amounts are fine, in KSII I can see the activity quantity filled with some numbers in 2009, where from are they comming? I have checked KBk6 nothing was mentioned.
PLease assit
Regards,
shilpaHi
I never used CAT* though, but the error means that you need to maintain a activity price in KBK6 (Actual price)
Regards
Ajay M -
WLST Ant Task Definiton does not exist for 8.1 ?
Hi,
I am trying to use Maven's ant plugin to run some WLST script to create some artifcats on my server. We are using platform 8.1 and so i downloaded the WLST 6.4 zip file from dev2dev and it contains wlst.jar and jython.jar but I cant find the following (which comes as std with 9.0):-
weblogic.ant.taskdefs.management.WLSTTask
Its not with the WLST distribution so how can I use it with my 8.1 infra (I am using the maven ant:ant plug in here) so have added the taskdef to my build.xml but I cant find it in any of the weblogic or wlst jar files....or the 8.1 wls ant distribution. Am I missing something ? Or I am forced to use this in my build file:-
<property name="propertiesFile" location="c:/eworld"/>
<target name="createServers">
<java classname="weblogic.WLST" fork="yes">
<arg line="-loadProperties ${propertiesFile}/connect.properties antExample.py" />
</java>
</target>
I wanted to (as in the 9.0 docs) use:-
<taskdef name="wlst" classname="weblogic.ant.taskdefs.management.WLSTTask" />
<target name="runwlst">
<wlst fileName="./myscript.py" executeScriptBeforeFile="true"
debug="false" failOnError="false" />
</target>
Your help much appreciated !.
TIA
MartinI have found out that the WSLTTask does not exist for 8.1 and only for 9.X.
Martin -
Category for material type MAT_KMAT does not exist for configurable product
Hi,
Trying to download Confihurable product from ECC to CRM,for this I am getting the below error.
"Category for material type MAT_KMAT does not exist"
For this , i have successfully downloaded the object DNL_CUST_PROD1, but still the material type MAT_KMAT does not exist under R3PRODSTYP in COMM_Hierarchy transaction.
kindly let me know how to get the material type MAT_KMAT under R3PRODSTYP .
Regards,
PVHi
Please go through the below pdf document. This will be useful.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/9076a9a4-923c-2c10-7483-d997a9eae976?quicklink=index&overridelayout=true
Regards -
Tax code does not exist for jurisdiction code in creating purchase order
Hello Experts,
After doing a technical upgrade from 4.6 C to ECC EHP 4 , while creating a PO , we are facing an error that
"Tax code A0 does not exist for jurisdiction code 4318702801". for one plant .
But in 4.6C, there is no problem with the field jurisdiction code in Invoice tab at the PO item level data. it allowed to create PO even with out entering jurisdiction code .
we have assigned jurisdiction code to the particular plant through config settings in T code OX10.And also we have verified the G/L account properties for the material used in creaton of PO. it will allow all tax codes.
But still we are facing the same error.
Please suggest where to establish linkgae betweeen Tax code and jurisdiction code at customize / config level.
it is very high priority issue . please suggest
regards,
TulasiHi,
As tax jurisdiction code is assigned to your plant on OX10 t.code and cross check Tax code declared as input tax & assigned to company code in t.code: OBCL with tjurisdiction code.
Now double cross check Tax code created (FTXP)for your country with jurisdiction code.
Also check table A003 for entry of tax code and company code.
Regards,
Biju K -
Custom segment does not exist for message type Debmas_cfs
Hi,
I have created a custom segment YEXTRA for basic type DEBMAS06.
I have done the configuration in We82 and We20.
I have implemented the segment in User Exit "EXIT_SAPLVV01_001". Now when I am executing the TCODE BD12 then it is creating the Idoc with custom segment. But when I apply the filter on sales org in BD64 then it starts giving me error that " Segment Y**** does not exist for message type DEBMAS_CFS.
Kindly suggest if I need to do some other configuration also.
Thanks.
Regards,
SAurabhHi Gearge,
To add custom segments, you should create an extension.
the TCODE is we30.
Refer this link:
http://help.sap.com/saphelp_erp2005/helpdata/en/dc/6b7d6243d711d1893e0000e8323c4f/frameset.htm
Regards,
Ravi -
Table does not exist for the sys user
Hey Everyone,
I am having a strange problem with 10G 10.2. I keep getting the table does not exist for all the tables when I am logged in as sys. It is strange because I can query the same tables being logged in as a regular user say 'scott'. I can't figure out what the problem is since it could not be privileges because the user is sys. Is there something I am missing here. Any advice would be welcome.
Thanks,
SarangYeah i am using the query....
SELECT * FORM SCOTT.EMP
It is a little wierd. I did a full database restore yesterday night. I dont know if that has anything to do with this. Will have to take a look at the logs. -
Node id does not exist for the current application server id on forms
Hi,
We have a Two node RAC setup on which Oracle e-business suite R12.0.6 is setup
We have CP and DB on two RAC nodes and Forms and Web on two separate server(non-RAC)
while opening oracle forms we are getting" Node id does not exist for the current application server id "
on checking Concurrent manager logfile we founf no error, we matched Application Server id from DBC file of all the 4 nodes with application table
Fnd_nodes... which matches ( there is no mismatch of application server id) .
We have also tried commenting the application server id in dbc file and executed adgendbc.sh to regenarate dbc file but we are facing the same issue.
Also tried to clear setup with fnd_conc_clone.clean setup and again executing autoconfig on db and application tier but no result yet.
Can some one guide as to which file has this message "Node id does not exist for the current application server id "
and what could be the reason for this.
Help is appreciated.
Regards,
MilanI already tried the mentioned metalink note id but it did not work.What did you try exactly?
Can u help out as from where am i getting the message "Node id does not exist for the current application server id" It is already mentioned in the doc referenced above -- From the dbc file under $FND_SECURE directory.
i mean from which file does the above message comes.Please clean FND_NODES table as per (How to Clean Nonexistent Nodes or IP Addresses From FND_NODES [ID 260887.1]), run AutoConfig on the database tier then on the application tier and check then.
Thanks,
Hussein -
Hello Sir,
OS version : AIX 6.1
DB version : 11.2.0.3
EBS version : 11.5.10.2
As a part of 11.5.10.2 to R12.1.1 upgrade, I am applying merged patch (9179588:R12.AD.B) with 9477107:R12.AD.B and patch 7461070(R12.AD.B.1 upgrade driver).
I can see AutoPatch warning messages during adpatch session as below so I have not yet started this merged patch. Please suggest.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drix10:/fmstop/patches/R1211AD/merge>adpatch
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
Oracle Applications AutoPatch
Version 12.0.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
Attention: AutoPatch no longer checks for unapplied pre-requisite patches.
You must use OAM Patch Wizard for this feature. Alternatively, you can
review the README for pre-requisite information.
Your default directory is '/fmstop/r12apps/apps/apps_st/appl'.
Is this the correct APPL_TOP [Yes] ?
AutoPatch records your AutoPatch session in a text file
you specify. Enter your AutoPatch log file name or press [Return]
to accept the default file name shown in brackets.
Filename [adpatch.log] : adpatch_u_merged_R12AD11.log
You can be notified by email if a failure occurs.
Do you wish to activate this feature [No] ?
Please enter the batchsize [1000] : 2000
Please enter the name of the Oracle Applications System that this
APPL_TOP belongs to.
The Applications System name must be unique across all Oracle
Applications Systems at your site, must be from 1 to 30 characters
long, may only contain alphanumeric and underscore characters,
and must start with a letter.
Sample Applications System names are: "prod", "test", "demo" and
"Development_2".
Applications System Name [FMSTEST] : FMSTEST *
NOTE: If you do not currently have certain types of files installed
in this APPL_TOP, you may not be able to perform certain tasks.
Example 1: If you don't have files used for installing or upgrading
the database installed in this area, you cannot install or upgrade
the database from this APPL_TOP.
Example 2: If you don't have forms files installed in this area, you cannot
generate them or run them from this APPL_TOP.
Example 3: If you don't have concurrent program files installed in this area,
you cannot relink concurrent programs or generate reports from this APPL_TOP.
Do you currently have files used for installing or upgrading the database
installed in this APPL_TOP [YES] ? YES *
Do you currently have Java and HTML files for HTML-based functionality
installed in this APPL_TOP [YES] ? YES *
Do you currently have Oracle Applications forms files installed
in this APPL_TOP [YES] ? YES *
Do you currently have concurrent program files installed
in this APPL_TOP [YES] ? YES *
Please enter the name Oracle Applications will use to identify this APPL_TOP.
The APPL_TOP name you select must be unique within an Oracle Applications
System, must be from 1 to 30 characters long, may only contain
alphanumeric and underscore characters, and must start with a letter.
Sample APPL_TOP Names are: "prod_all", "demo3_forms2", and "forms1".
APPL_TOP Name [drix10] : drix10 *
You are about to apply a patch to the installation of Oracle Applications
in your ORACLE database 'FMSTEST'
using ORACLE executables in '/fmstop/r12apps/apps/tech_st/10.1.2'.
Is this the correct database [Yes] ?
AutoPatch needs the password for your 'SYSTEM' ORACLE schema
in order to determine your installation configuration.
Enter the password for your 'SYSTEM' ORACLE schema:
The ORACLE username specified below for Application Object Library
uniquely identifies your existing product group: APPLSYS
Enter the ORACLE password of Application Object Library [APPS] :
AutoPatch is verifying your username/password.
The status of various features in this run of AutoPatch is:
<-Feature version in->
Feature Active? APPLTOP Data model Flags
CHECKFILE Yes 1 1 Y N N Y N Y
PREREQ Yes 6 6 Y N N Y N Y
CONCURRENT_SESSIONS No 2 2 Y Y N Y Y N
PATCH_TIMING Yes 2 2 Y N N Y N Y
PATCH_HIST_IN_DB Yes 6 6 Y N N Y N Y
SCHEMA_SWAP Yes 1 1 Y N N Y Y Y
JAVA_WORKER No 1 -1 Y N N Y N N
CODELEVEL No 1 -1 Y N N Y N N
Identifier for the current session is 2987
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/eaaprod.txt
does not exist for product "eaa".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/abmprod.txt
does not exist for product "abm".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/evmprod.txt
does not exist for product "evm".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/ipdprod.txt
does not exist for product "ipd".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/zfaprod.txt
does not exist for product "zfa".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/zsaprod.txt
does not exist for product "zsa".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/cssprod.txt
does not exist for product "css".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/meprod.txt
does not exist for product "me".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/xnmprod.txt
does not exist for product "xnm".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/xncprod.txt
does not exist for product "xnc".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/xnsprod.txt
does not exist for product "xns".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/fptprod.txt
does not exist for product "fpt".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/okrprod.txt
does not exist for product "okr".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/cueprod.txt
does not exist for product "cue".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/ibaprod.txt
does not exist for product "iba".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/ozpprod.txt
does not exist for product "ozp".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/ozsprod.txt
does not exist for product "ozs".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/rlaprod.txt
does not exist for product "rla".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/vehprod.txt
does not exist for product "veh".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/rhxprod.txt
does not exist for product "rhx".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/imtprod.txt
does not exist for product "imt".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/ahmprod.txt
does not exist for product "ahm".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/okbprod.txt
does not exist for product "okb".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/okoprod.txt
does not exist for product "oko".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/xniprod.txt
does not exist for product "xni".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/jtsprod.txt
does not exist for product "jts".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/amfprod.txt
does not exist for product "amf".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/fmstop/r12apps/apps/apps_st/appl/admin/cunprod.txt
does not exist for product "cun".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
Reading database to see what industry is currently installed.
Reading FND_LANGUAGES to see what is currently installed.
Currently, the following language is installed:
Code Language Status
US American English Base
Your base language will be AMERICAN.
Setting up module information.
Reading database for information about the modules.
Saving module information.
Reading database for information about the products.
Reading database for information about how products depend on each other.
Reading topfile.txt ...
Saving product information.
Trying to obtain a lock...
Attempting to instantiate the current-view snapshot...
No baseline bug-fixes info available. Will attempt next time.
**************** S T A R T O F U P L O A D ****************
Start date: Sun Aug 04 2013 18:45:12
0 "left over" javaupdates.txt files uploaded to DB: Sun Aug 04 2013 18:45:12
0 patches uploaded from the ADPSV format patch history files: Sun Aug 04 2013 18:45:12
Uploading information about files copied during the previous runs ...
0 "left over" filescopied_<session_id>.txt files uploaded to DB: Sun Aug 04 2013 18:45:12
****************** E N D O F U P L O A D ******************
End date: Sun Aug 04 2013 18:45:12
Enter the directory where your Oracle Applications patch has been unloaded
The default directory is [/fmstop/patches/R1211AD/merge] :
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++I checked under 11i $APPL_TOP/admin directory, I can see only one izuprod.txt file apart from applprod.txt.
drix10:/fmstop/fmstest/fmstestappl/admin>ls -lrt *prod.txt
-rwxr-xr-x 1 appltest dba 231650 Oct 30 2004 applprod.txt
-rwxr-xr-x 1 appltest dba 4966 Sep 21 2007 izuprod.txt
R12 code tree is newly installed so there is only applprod.txt
drix10:/fmstop/r12apps/apps/apps_st/appl/admin>ls -lrt *prod.txt
-rwxr-xr-x 1 appltest dba 226340 Jul 29 15:19 applprod.txt
Please suggest if I can ignore these warning to proceed with applying merged patch. -
Cost Center does not exist for a particular period - Solution
We have encountered an error in the subject,
COST CENTER does not exist for a particular period
Solution:
1) Either extend the Posting period for the invoicing date
2) Or enter the Cost Center as PO number in Sales Order
Please do add your comments if there are different ways to solve this errorThe Post contains a solution
-
Hi.
Recently I've discovered that ADR was creating a folder in one of ours Oracle 11.2.0.1 server, in the users home like ~/oradiag_$USER/.. The problem is that this logging files dont stop growning, and they are filled only with this lines:
Wed Apr 11 13:40:06 2012
Directory does not exist for read/write [usr/oracle/product/11.2.0/log] [usr/oracle/product/11.2.0/log/diag/clients]
Wed Apr 11 13:40:06 2012
Directory does not exist for read/write [usr/oracle/product/11.2.0/log] [usr/oracle/product/11.2.0/log/diag/clients]
Wed Apr 11 13:40:06 2012
Directory does not exist for read/write [usr/oracle/product/11.2.0/log] [usr/oracle/product/11.2.0/log/diag/clients]
Wed Apr 11 13:40:06 2012
Directory does not exist for read/write [usr/oracle/product/11.2.0/log] [usr/oracle/product/11.2.0/log/diag/clients]
Wed Apr 11 13:41:06 2012
Directory does not exist for read/write [usr/oracle/product/11.2.0/log] [usr/oracle/product/11.2.0/log/diag/clients]
etc
I've searched around internet about this issue all that I've found is a "workaround" by creating those folders. And yep, it works, it stops growning.
Then I checked the others servers that we have, and the problem replicates in some servers with the same Oracle version.
My question is: Why this? Why in some servers ADR is looking for that folder? That folder didnt exist in any of them, but only some servers tries to read/write on it (or, at least, log it) What parameter relies on it?
Regards.Metalink note
11g Sqlnet Log Shows Error "Directory does not exist for read/write" [ID 797678.1]
Errors Filling log.xml and sqlnet.log: Directory does not exist for read/write [opt/oracle/oemagent/agent11g/log] [ID 1291286.1] -
Value does not exist for "..." in connection...
Hello,
I have following issue using Design Studio 1.3.
I was changed my source of dashboard from universe to Bex Query.
When it was done I have received following Script Problem related to CheckBox
Description
Location
Event Script
Component
Application
Type
Value "Sourcable" does not exist for "GP_XSRCB" in connection "cuid:AdpcHfZ9h0VKrXD0XhomzOs"
Line 3
On Click
CHECKBOX_1
[rkams1157] S2P_PROTOTYPE_MDM_001-002 - dev
Design Studio Script Problem
Below please find the Script syntax:
if(CHECKBOX_1.isChecked())
DS_2.setFilter("GP_XSRCB", "Sourcable");
else
DS_2.clearFilter("GP_XSRCB");
I would like to note that this script on CheckBox works fine based on universe as a source.
Please advice.Dear All,
I am also facing same problem, while doing PGI (Post Goods Issue)
Can any one help in this please.
And the error message was
Characteristic value SEL F1P ADD 82947 does not exist for characteristic PAPH4 (ProdHier01-4)
Message no. KE0C133
Diagnosis
The characteristic "PAPH4" ("ProdHier01-4") should be posted to Profitability Analysis (CO-PA). When the system checked the entries, it was established that the transferred characteristic value (" SEL F1P ADD 82947") is not valid in CO-PA.
System Response
The data is not consistent and therefore cannot be transferred to CO-PA.
Procedure
With the function Maintain Characteristic Values, you can add characteristic values to those that are valid.
1. When, I check contents of table MARA-PRDHA, it contains 17 character Alphanumeric input "SEL F1P ADD 82947"
2. When, I check character PAPH4 in KEA5-->Data type was CHAR and length was 17.
3. Characterstick PAPH4 cannot be maintained using KES1.
Thanks & Regards
Sahas -
Error : DB Mapping does not exist for the Host in iSetup
Hi Experts,
We configured iSetup for migrating data from source to target, while configuring instance mapping has been completed successfully but while extracting data from source to target is showing below error :
Error : DB Mapping does not exist for the Host:<host name > with Two Task: TEST
EBS Version : 12.1.1 with 11.1.0.7 DB
OS : RHEL 5.3 x86_64
Any idea much Appreciated .
Thanks in advance,
Regards,
900076.900076 wrote:
Hi Experts,
We configured iSetup for migrating data from source to target, while configuring instance mapping has been completed successfully but while extracting data from source to target is showing below error :
Error : DB Mapping does not exist for the Host:<host name > with Two Task: TESTIs this the complete/exact error message?
EBS Version : 12.1.1 with 11.1.0.7 DB
OS : RHEL 5.3 x86_64
Any idea much Appreciated .
http://docs.oracle.com/cd/E18727_01/doc.121/e12899/toc.htm
http://docs.oracle.com/cd/E18727_01/doc.121/e15842/toc.htm
Thanks,
Hussein -
Problem in merge statement -ORA-27432 Step does not exist for chain
Hi
I m getting ORA-27432 Step does not exist for chain error in merge statement.Please explain the same.
MERGE INTO fos.pe_td_hdr_sd B
USING (
SELECT ACTIVE, ADDUID, ADDUIDTIME,TDKEY FROM pe.pe_td_hdr
WHERE (adduidtime like '20070104%' or edituidtime like '20070104%')
AND NVL(legacy_td,'N')<>'Y'
AND SUBSTR(adduidtime,1,4)='2007'
AND AMENDMENT_NO=0)A ON ( B.TDKEY = A.TDKEY)
WHEN MATCHED THEN
UPDATE SET B.ACTIVE=A.ACTIVE,
B.ADDUID=A.ADDUID,
B.ADDUIDTIME=A.ADDUIDTIME
WHEN NOT MATCHED THEN
INSERT
B.ACTIVE,
B.ADDUID,
B.ADDUIDTIME)
VALUES(
A.ACTIVE,
A.ADDUID,
A.ADDUIDTIME)This query is a short version of the main query.It is same but having 180 columns in original table.What version of Oracle are you using? This message does not appear in my 10.1 Error Messages document, but the other messages in that range seem to be about DBMS_SCHEDULER.
Are you using scheduler somewhere around where you are getting the error message?
John -
Document Sequence Information Does not Exist for Bank Account
Hello,
Oracle E-Bus Suite: 11.5.10.2
OS: Windows 2003
We are facing the problem while executing the ARPLABIM - Bank Statement Import program, 'Document Sequence Information Does not Exist for Bank Account'.
We have already reviewed Oracle Metalink Document: Document Sequence Information Does not Exist for Bank Account: Doc ID: Note:147773.1.
https://metalink.oracle.com/metalink/plsql/f?p=130:14:3345134018905587318::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,147773.1,1,1,1,helvetica
But the profile option Sequential Numbering cannot be set to Not Used due to certain funcational limitations. Please advise any other workaround.
Thank youAdith,
There are only two options:
1. Setup document Sequence. OR
2. Change the profile either the user level who runs this program (assuming a batch user name) or at the resp or application level. Not necessarily at the site level.
Thanks
Nagamohan
Maybe you are looking for
-
Can i use this as icloud storage?
I have my time capsule and I was told I can use as i cloud storage to store data anywhere I travel?
-
HT4993 iphone went black wont turn back on
iphone went black wont turn on even plugged into charger
-
Display only uses middle third of screen, how to go full width?
Using win7-64, IE8 displays correctly on large crt, most web sites using FF4 use about the 50% of the display width, centered ok, some text is also overlaid, but top 15%(tools, bookmarks, etc ) are full wideth and ok
-
Change results in Inspection Point
Dear All, I did the results recording using qe51n for three inspection points in one lot. i also did the force completion and the status is in 5. Now i want to change the result in one inspection point. How do i do that? QA22 or QE71 doesnt do it? Re
-
Thread-6080 ERROR ilint: MetricEngine Exception: Could get metric.
this my metadata file <?xml version="1.0" ?> <!DOCTYPE TargetMetadata SYSTEM "../dtds/TargetMetadata.dtd"> <TargetMetadata META_VER="1.1" TYPE="oracle_replica" CATEGORY_PROPERTIES="VersionCategory"> <Display> <Label NLSID="oracle_replica_name">Replic