Country key and region change
Can any tell that how i can change country key and region of plant after some material master data is maintained? In spro sap is not allowing to change the country key and region of the plant.fields are in display only
Dear,
Go to OX10 transaction and select your plant - select details - once plant details displayed, click on address icon on (Shift+F5). Here you change the country in address.
But consider different impacts of country change - like tax calculations, Sales etc.
Regards,.
Syed Hussain.
Similar Messages
-
How to create a new Country-Key and Region
Dear Sir,
We are creating a new Customer Master record using Tcode XD01 , the customer belong to a Country "MOZAMBIQUE" . This country doest not exist , so we have to create a new Country , Country-Key and Region for this .
Pl guide us , as what steps are required to be followed for this .
We assure to award full points for the suggested solution pl
Rgds
B MittalHello,
You can define new country code at general settings in SPRO.
SPRO --> IMG -> General Settings -> Set Countries -> Define Countries . Transaction code OY01.
Prase -
Country name and region name in smartform
hi friends
1. In smart forms I want to display country name and region name in template text .
can any one help me how could I write code for it and the procedure.
2. IN scripts komk-fwkrt = '1.00.200,32'.
but it should be displayed as 1,00,200.32
how should I make changes for this field?
thanks and regards
deepika.Hi deepika,
For your first question, I happened to have written similiar codes recently.
If you have the country code and region code, you can read the country name from table T005 and region name from T005s.
You can create a new routine for this and call it from Initialization.
Hope this helps.
Shane
Edited by: Shane Chen on Jul 15, 2009 10:35 AM -
Need to know alternative country Key and Vehicle country Key
Hi Experts,
I am defining new country codes in SAP ECC and GTS System. Can someone help me to find out Alternative country key and Vehicle country key for the below mentioned country Codes.
AX
Åland Islands
GG
Guernsey
IM
Isle Of Man
JE
Jersey
PS
Palestinian Territory, Occupied
TL
Timor-Leste
Please assist me in this regard as this is very urgent.
Thank you
Vinod KakarlaHi,
Use Tcode - VI78 to find alternative country key
T coe - OY01 for vehicle country key
001 (European standard formatting), 002 (Italy), 011 (Switzerland) and 014 (Austria) use the vehicle country key of the relevant country. If no vehicle country key has been maintained in Customizing, the country key of table T005 is used instead. If, for the sender country, the indicator for printing the country name in foreign addresses is set in table T005 , the system does not use the country key, but generally prints the country name in the last address line. Check the sap Note: 1509425.
Ashish -
Apple ID country and region change
How can i change region of my Apple ID from Canada to USA? Also, if i can get a job at Apple, how do i get the account to become an employee account? I can't delete it and it'll have to stay with me for my whole life so can anyone teach me the help will be appreciated very much.
Go to http://appleid.apple.com and click 'Manage your Apple ID'. Sign in. Then click 'Addresses' in the sidebar. You can change your region at bottom right of the page, and of course your physical address.
As to employee accounts, you'd have to ask them when you become one. -
Need Help on How to Change The Encryption Key and or Change security settings
Hello, i just installed the wireless router and i would like to know how i can change the encryption key or change the security settings (i want it so you do not have to answer it with a password). Thank you in advance.
Message Edited by DARK_MARIO on 01-06-200706:10 PMHi…
In order to change the wireless settings of your router you need to login into the router configuration page. Open your internet explorer browser…in the address bar type http://192.168.1.1 ( Default IP address). Leave the username field balnk……type admin as password (If you have not changed the router password). When the setup page loads fully…..click on the tab that says wireless. Just below the main tab wireless ….click on the sub tab that says wireless security. You can Change the wireless security settings here. After the changes are made click on save settings. -
How to change the bios back to english. I hit a key and it changed it to Japanese
I put a password on my laptop so I have to sign . well I've forgotten the password so I was trying
To see how to reset it or do a system restore.. Well I was checking out the BIOS and hit the wrong button and now its in a different language. So can someone please help me figure out how to change it back to English. And get into my laptop..I still can't remember my password. Thank you!!
CherryCherry, welcome to the forum.
You should go into the BIOS setup by tapping the "esc" key continuously as the computer is booting. This will take you to a Menu. Choose F10 for BIOS setup. Once you are into the BIOS, use the arrow keys to move to the "Exit" Tab. Press the "Enter" key to open this Tab. Move down to the Default settings (may be a bit different wording) option. Press "Enter" again. You want to choose "Save and exit". This should set the computer back to the way it was when you bought it.
Now, for the password. The only choice that you have is do a System Recovery. There is no way to use the computer without the password.
For future reference, when requesting help you should always include the make/model (i.e. p6-xxxx) of the computer and/or monitor. This information is necessary for us to review the specifications of them.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee. -
Deactivation Impact of ISO Code and Vehicle country key
Hello All,
We have a requirement to use the BSEG-KIDNO in accounting document line item. This field has to do some calculation by using Validation exit. This calculation works fine except for certain countries like Sweden(SE), for which some standard function module is triggering. On further research we have found that by deactivating the country specific checks( Vehicle country key and ISO code) we can deactivate the standard function module and make our validation exit work. This can be acheived by making blank for "Vehicle Country Key" and ''ISO Codeu201D in OY01 (IMG--> General setting --> Set country --> Define country) for Sweden.
Could you please explain what will be the impact in other areas by deactivating ISO code and Vehicle country key in OY01.
Appreciate your reply.
Thanks in advance.
PrasadHi Prasad,
You should not remove them since
ISO
The entry is used in countries of the European Community to check the
VAT registration number (VAT reg.no.). You can store the VAT
registration number in the master record of a customer or vendor, or for
the company code.
The ISO code is used as the country key when exchanging information via
EDI. You must therefore specify the ISO code for each country in this
field if you use EDI.
The ISO code also controls which additional specifications are relevant
for a company code. You can always only enter the additional details
which are relevant for the company code country or for all countries.
The assignment to the country takes place via the ISO code.
Vehicle country key
The vehicle country code is a standard key worldwide. It does not depend
on the country in which the SAP System is installed.
The key is therefore used as a basis for accessing country-specific
check routines. Furthermore, it can also be used as a supplement to the
postal code.
This key should be specified for all entries in the country table.
Can you check the OY17 setting under the Further Checks Bank data check box for working Country and Sweden?
Reg
Vishnu -
Help regarindg country formatting and printer formatting in scripts
Hi all,
I'm facing a problem printing the address in SAPscript. Though we try to display the field T005-LAND1 within Address -endadress, the field T005T-LANDX50 gets displayed.
For example- when we want to display countrycode as NL(netherlands), only 'Kingdom of the Netherlands' is diplayed.
i believe this is because of the Country format used in the adress. Is there anyway we can change the country formating.
Also the output gets different alignment when we use differnt printers for preview. is there anyway to overcome this?
Your replies will be very helpful and thanks in advance.hi,
this is quite natural that ur print preview and print out differs and it differs from printer to printer.so, u have to define the paper size correctly and check if possible the type of printer they will be usually using.
here in ur case r u trying to pring the country key or country name.
in fact u have to pick the country key and print the country name in that place by getting the name from check table. -
Several Vendor VAT registration numebr with some Country KEY
Dear SAP guru,
is it possible to insert several VAT REgistration Numebr for the ssame vendor with same Country KEY?
For ex for vendor 1000
1 - IT04673400729
2 - IT06534340721
When I tried to input the second vat registration numebr in the field "OTHER", there is an error message:"Maintain VAT registration no.for country IT on the previous screen"
franckly I am not able to understand where is the problem,
thanks for the help
marcoDear Ravi
thanks for the reply.
about you question:
1 - View Control of vendro master data: the first vat reg no is in the field STCEG (table STCEG). I enter the second vat registration number by clinking on OTHER icon and the I input: contry key IT and VAT registration number
2 - the format of vat registration numebr is correct, for ITALY is 13 lenght wihotu gaps
3 - the error message is "Maintain VAT registration no.for country IT on the previous screen
Message no. F2143 " very few information
I think the proble is due that I am entering the same a new vat registration number for the same country key. Indeed if I fill a vat registration with different country key and works!
regards
marco -
Hi there, I moved to a new country (Luxembourg ), my previous card is not working anymore, I am trying to change country and region but it looks like the option is not available, could you support on the issue please ? Thx ahead, Corneliu
CHANGING APPLE ID/EDIT ACCOUNT INFORMATION/CHANGE ITUNES COUNTRY
Tap Settings / iTunes & App Stores, then tap the Apple ID signed in. Sign out of the current Apple ID account and then sign in with another account or create a new Apple ID http://support.apple.com/kb/HT2731?viewlocale=en_US
Go to settings/facetime and tap the ID there and log out and log in with new ID.
Go to settings/messages and turn off imessages wait 30 seconds and turn it back on, go to “receive messages at” tap on the ID there, sign out and sign in with new ID.
Go to settings/icloud and delete the account and when prompted select “keep information on your device” then turn it back on with the new ID.
To edit account information tap Settings / iTunes & App Stores / Apple ID: / View Apple ID
To change your iTunes Store country, sign in to the account for the iTunes Store region you would like to use, tap Settings/iTunes & App Store/Apple ID/View Apple ID/Country/Region
Read this article for information http://support.apple.com/kb/HT1311 -
Hey so I'm having trouble changing my country/region on my iphone 5 every time it go through settings Apple ID and try change the country it's just blank ? Any ideas ?
Hello Natethemate,
Thank you for the details of the issue you are experiencing with changing the country for the iTunes Store on your iPhone. For this issue, I recommend signing out and back into the iTunes Store on your iPhone:
Sign in with a different Apple ID
Tap Settings > iTunes & App Stores.
Tap your Apple ID.
If you see the option to Sign In, you can change your Apple ID now.
Tap Sign Out.
Enter your Apple ID and Password and tap Sign In.
You can find the full article here:
iOS: Sign in with a different Apple ID in the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/ht1311
If the issue persists after signing out and back in, I recommend quitting and relaunching the applications on your iPhone:
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
You can find the full article here:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
If you are still seeing the same issue after quitting and relaunching the iTunes Store app, I recommend restarting your phone and then resetting if it's still not working:
How to restart
Press and hold the Sleep/Wake button on the top of your device until the red slider appears. Then drag the slider to turn your device completely off.
After the device turns off, press and hold the Sleep/Wake button again until you see the Apple logo.
How to reset
You should reset your device as a last resort and only if you can't restart it.
To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
You can find the full article here:
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
Thank you for using Apple Support Communities.
Best,
Sheila M. -
HT1904 How to change back to my current country and region?
How to I change back to my current country And region at my App Store?
If you are getting an 'account not in this store' message thne try going to the bottom of the Featured tab in the App Store app on your phone and tap on your account id, tap on 'View Apple ID' on the popup and log into your account, and then select the Country/Region section and select your country.
-
I can't delete events recurring annually...not part of birthday calendar, these are events I've added manually. I've tried delete key, cut event, changing to no recurrence, they just revert to original recurrence and will not be removed from my calendar. Events that occur weekly I'm able to delete, this is only happening with events recurring annually. Very frustrating. Thanks for any ideas.
If you are using a PC, log on to iCloud using Safari (rather than Explorer) to reset the photostream. Then turn iPhone/iPad photostream off and back on. I was getting the same server error as you and this advice from another blog worked for my iPhone and iPad. But I still can't get photostream deleted from my apple tv. There does not seem to be a photostream on/off control In Apple tv 4.4 software. I tried switching the screen saver to one of the ones that comes preloaded on the device, then back to photostream but all the old photos are still there. If anyone can help with this, I would appreciate it.
-
I change my Pc and don't found my Original DVD from my Acrobat 9 STANDARD. I have the Key and found in Internet the Pro Version, but not the Standard Version. Where can i download the Standard Version?
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.window using the Lightroom 3 link to see those 'Important Instructions'.
Maybe you are looking for
-
also awindow pops up NS error XPC Bad convert JS cannot convert JAVASCRIPT argument arg 4 (NSL window watcher open window) == This happened == Every time Firefox opened == just today == == User Agent == Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5
-
Searching Records Following the Creation of a Lookup Table
Hello, Please excuse my ignorance but I have just created a lookup table by using the wizard in SQL Workshop. All is well text has been replaced by numbers. My issue is that when I do a search now using a drop down list based on a query it returns re
-
Consignment vs owned inventory for the same material/inventory (cycle count)
Hi All, I am looking at ways within SAP that I could differentiate materials/inventory that are consignment and owned inventory... We have a department that are experiencing difficulties performing cylce counts as they both owned and consignments par
-
Hiding the first 5 numbers of SSN within a Crystal Report?
Post Author: robertr CA Forum: General I am sure that this is easy - but how do you set a field such as an SSN field to only display the following: with a standard Crystal Report? XXX-XX-1234 (I would like to get this output everytime I run this rep
-
Com.sap.portal.runtime.login.par.bak
Hi everyone, I've been reading blogs and forum posting regarding how to change the logon page. In all sources that I read, they all refer that the location of 'com.sap.portal.runtime.login.par.bak' is in '<drive>:\usr\ap\W01\JC00\j2ee\cluster\server