Country key INR is not defined after client copy

Dear All,
I'm doing a client copy in my solution manager system.
Target Client         100
Source Client        000
Copy Type           Local Copy
Profile                 SAP_CUST
Status                 Successfully Completed
User                    SAP*
The log from SCC3 shows that the copy is successful. However, when I'm logged in to client 100 (new client), I have problem assigning the profiles to the user.
In SU01, when i was assigned the profile (SAP_ALL) to the user, the message says that "Profile SAP_ALL does not exist or is not active".
so I have use SU21 and reactivate SAP_ALL profile, then SAP_ALL assinged sucessfully
But when i try to assine SAP_NEW profile to user, message says that "Profile SAP_NEW does not exist or is not active".
However, when i try creating a new user in SU01, a message box prompted out an warning "Inconsistency with address" and "No default co. address has been maint. in the system. Create an address". When i try to create the address, the entry for "country" does not have any choices and values. If I fill in my entry, the system displayed "country key XXX is not defined"
Did do something wrong here? Please suggest how to correct this issue
Regards,
Ajay

Dear Mr karthikeyan,.
Thanks for your helpful answer.
As per note 1711620 - use of SAP_NEW is not required for every version change project, no automatic generation takes place
So its mean that SAP_NEW profile is not required now?
and as per note 1164216, i have mentioned entries of country code in table T005 and its work.
Time zone INDIA does not exist- for that i use the note 198411 and its also work.
But "Company address could not be created" could you please help[ in this
Regards,
Ajay

Similar Messages

SAP* not authorized after Client copy

Dear All,
Here's the scenario:
1. Created a new logical system for a new Quality client 230.
2. Created the new client 220
3. scheduled a test remote client copy from the new client, source Production. (Successful)
4. Scheduled the actual client copy to run last night.
5. Today morning, I'm logging into the new client with SAP*, it prompted me to change password.
6. I want to look for the client copy logs (SCC3), but getting "not authorized"
7. Checked all other transactions, all giving "not authorized" error
Any help would be appreciated. Thanks in advance.

Dear Reza,
Better to go for Client Export Import process . This is what SAP reccomends for coping clients between
different systems ( Like from Production to Quality ) as the remote client copy has many
disadvantages..
For this 1 ) you should get the downtime of production system and do the client export process .
SCC8 . See the logs at scc3 .
2) Copy the datafile and cofile to the Source system
3) Import it usting stms_import .
Monitor the logs as the logs will be grown massive and make sure enough space is there.
4) After client copy , go for post processing ( scc7 ) .
Hope you are clear and feel free to get back if any doubts.
Regards,
Nibu

Postings for account type M ( posting key 99 ) are not defined

Hi,
I am trying to post vendor credit memo KG through FB01 using posting key 21 - Debit Vendor and posting key 99 - Credit Material.
I am getting the error "Postings for account type M ( posting key 99 ) are not defined Message F5204".
The posting key 99 is set for account type material. Is there anything else that need to be configured?
Is there any other way that i can debit a vendor and credit material through FI postings (without purchase order)
Thanks
Sukumar

Hi Ravi,
I am also having the same issue.
I want to load some costs to materials thorugh Finance module. In that case i am trying to post the values through F-43 document.
In posting key 89, but system not accepted. As per your suggestion i am trying to take 81 posting key. Then system is asking the GL, there is i select the Stock GL, system won't allow to post the values to the stock account.
So what will be the solution to add or to deduct any other charges to the material cost through finance module.

Roles are not found after client refresh

Dear Friends,
Yesterday night i had refreshed our 210 client by 220 client in same system by using SCCL Transaction code by logging into target system. I got message as client copy completed successfully. For that i choose profile SAP_CUST.(Because requirement is they need all customization data only).
But after this activity i observe that all user present in system, but some roles are not fount which was present before.
So users face authorization issue.
So please help.
What are post activity after client copy?
Thanks,
Regards,
Sachin

when you mean "the contact is still in the Address Book" you mean you can see in the list on the left hand side column? but you just cannot see it if you search for it via the search field. is that correct?
i have had issues with syncing contacts added to my iphone, in these instances the contact or the info added to the existing contact would not flow through to the mac's AB. I solved this by doing a reset of the iphone in itunes and then syncing again, and from then on things started to work.
also there is an option in itunes in the info pane that let's you select which group a contact is added to on the iphone, if indeed you have and use groups in AB, and of course which groups you would liked synced if you decide not to sync all contacts. you may want to check that these settings are correct and do not somehow screw up a contact added top iphone during the sync... just an idea.
hop this helps

Change Myself system in RSA1 trx after client copy

Hi,
I have installed SCM 2007 system.
As post-processing step i have configured myself system in RSA1 trx in the 001 client.
Now, i want to perform client copy and use that new client 100 as Prod client. What are the steps required to change myself system to point to the new client?
Please help.
Regards,
Chintan

HI,
As logical systems are used to define you can use BDLS to convert them after client copy.
Go through :Note 325470,325525.
Thanks.

TCURM in target client empty after Client Copy

Hi Experts,
Has anyone encountered situation whereby TCURM does not contain a record for the target client after Client Copy process is completed? Is this a feature or bug?
Regards

Hi , I user the exclude tables option to exclude some tables.
but I have another problem: the client copy still failed. I get these informations:
table/object   component                         error
ANLU           FI-AA-AA                   Field missing locally
C905            SD-MD-CM                Different Field Names
IMPTT          PM-EQM-SF-MPC      Field missing locally
how can i finish my client copy ?   can you give me the solution
thanks very much

Unable to find product categories after client copy

Hi all,
We have copied clients from an existing ones for both SRM and ECC. After client copy we have followed standard procedure after client copy i.e.
Run transcation BDLS
created new RFC connections
changed attributes using the Attributes replace report
created new distributon model
maintained CRM parameters
maintained new site attributes in SMOEAC transaction
maintained entries in table TWPURLSVR
however , when i try to create a shopping cart, I cannot see any product category. The extended attributes for product category point to new ECC client becuse we have run the attributes replace report.
however in the product category table , COMM_CATEGORY , the product categories listed are all for the old ECC client
When i tried to load the Object DNL_CUST_PROD1 using transaction R3AS in SRM and tried to pull from new ECC client , it is in runing status for a long time and new categories with new ECC backend reference are not being replicated in the SRM.
Can you tell me why this could be happening ? How can i get the product categories from new ECC backend into my client?
Regards,
Mangesh

problem solved
i was using wrong parameters in BDLS

BI-RFC problems after client copy

Hi all
Client copy was done and after that when I tried to load data in BW, it ran for long time and finally showed cancelled in SM37. When I checked the source system in RSA1, it gave two messages.
1.Incorrect IDoc type ZSAC008 in the ALE definition of the source system RSAR373
2.Result of the destination check: Password logon no longer possible - too many failed attempts RSAR375.
In long text of message 1 suggestion was to enter IDoc type ZSAB003. In SM30 for Message Type RSSEND Basic Type ZSAB003 Release field is empty. Is this error because of this? After client copy is there a way to restore the settings back to how it was set initially in the development server? Basis told ALEREMOTE & BIWREMOTE are not blocked. What is missing here? Thanks a lot in advance.
Subin

There are a few things need to be performed on basis side after copy .
1. Restore of Logical system.--> check with Baisis team wheather they have performed this action or not after copy.
2. Check your source system connection, in rs1-- source sytem --check
3. Change the aleremote or Bwremote passwords.
4. Try to logon to your sourcesystem ( from SM59 Tcode) Remote logon.
Hope this helps.
Regards,
Reddy
Edited by: Reddybl on Apr 1, 2010 11:56 AM

After Client copy - No Authroization Issue

Dear All,
Good Day,
We copied Production data to Quality system through Transport management System. We checked those data copied successfully. After client copy, login in Quality also done successfully
But unable to run any transaction. no authroization error occur for all the transaction for all the user id.
"You are not authorized to use transaction XXXX"
Kindly advice me to resolved this issue.
Best Regards,
KSK

Was security transported down? Can you log into the system as SAP*? If so, check to make sure that all the roles and user masters where copied. You can also run st01 to do an authorization check.

PS CS4 will not open after carbon copying drive to new SSD on MacPro

PS CS4 will not open after carbon copying drive to new SSD on MacPro. Pop-up windows inform me that the scratch disk is not available. I would appreciate any advice on how to rectify this problem.
Thanks
marco

Thanks avanishdivya.
I was hoping to avoid that route, but guess it's all I can do.
Thanks for your quick response.
Do you know if it is a Carbon Copy Cloner issue or just the way Adobe sets it up?
For future reference, where should the scratch disk reside? I heard it should not be on the boot drive?
marco

AFAB: Runtime Error after client copy.

Hi all,
I'm having a problem with the transaction code AFAB (post client copy). After client copy from PRD to DEV, I'm encountering this runtime error "SAPSQL_ARRAY_INSERT_DUPREC - The ABAP/4 Open SQL array insert results in duplicate database records." whenever I tried to perform AFAB. Test run was executed successfully but I cannot complete the actual background processing.
I have try with other asset (in the same client) and encounter the same problem. Likewise, I have successfully completed the depre. if I try the same and other asset (in a different client on the same server).
I've check the number range in FBN1 and have verified that the range is correct.
Any advice as to how I can solve this problem?
Thank you.
Regards.
p/s: if there is duplication, how do I find where the duplication is located and how do I remove this duplication?
p/s 2: the standard SQL that is having this problem is "INSERT COBK FROM TABLE COBK_INS."
Edited by: Sek Yao Ooi on Aug 5, 2010 5:21 AM

Solution obtain from snote-83731 ; thanks to SAP-Marketplace's support.
Issue solved.

Background jobs pointing to old client after client copy

Hello
We have recently completed system refresh from PROD system to TEST system.
We have created new client in new TEST system. Background jobs are copied properly from old client to new client.
But all these jobs are pointing to old client only. We have deleted old client.
Hence all these jobs get cancelled.
How shall I change the client of all the jobs from old to new one.
-Nandu More

Please check the thread:
Error in Background Jobs After Client Copy
Check some of the TBT* tables.

After client copy and import export, WebUI not functioning

Hi Experts,
We have copied the client MKH300 into the client MKH305. The client
copy was performed using SAP_ALL authorization.
After the client copy a client compare was performed and several
differences were discovered. BDLS was run and a custom program was run
to copy custom tables from MKH300 to MKH305. This program has been run
in several other client copy cases and there is no issue with it.
When logging into the WebUI in client MKH305 an error message is
displayed in the application log:
"An exception has occurred during program processing"
(Please see attached screen shot)
When looking into the details the following text is shown:
Diagnosis
An exception occurred during request processing. This was handled
centrally. It changed the program flow and the result of the request
probably contains errors.
Procedure
Contact your system administrator.
Procedure for System Administration
Activate checkpoint group BSP_WD_EXCEPTION_DISPLAY. To do this, use
transaction SAAB. If the error recurs, further details are displayed.
When the check point group was activated there was no more information.
The links in the Homepage are not correct even though the business
roles, config keys etc look the same between the clients.
Much customization seems lost for the WebUI although when comparing the
two clients' customization for the WebUI they seem identical.
The client MKH300 works fine so the intention was that MKH305 should be
an exact copy of that client, but that did not happen.
Could you please help me out.
Thanks!
Nagaraju

they are included in the xe server install ...you could try copying the executables but maybe that wont work if all the libraries arent present
failing that install the regular oracle client

SWN_SELSEN not working in test client after client-copy

Hi all,
We are using extended notification without problem until test client was refreshed by client-copy from production client. In test client, report SWN_SELSEN did not generated notification even there are newly generated workflow items. Because of client-copy, I found that tables SWN_NOTIF, SWN_NOTIFTSTMP, SWN_SENDLOG, SWN_TIMESTAMPS are all empty in test client.
Please advise how to make report SWN_SELSEN back to work in test client. Thanks.
<< Additional information >>
(1) Run report SWN_SELSEN_TEST with test Case 5 - Simulate Send Only. After this, some entries were written to above tables. But test on new workflow item, the schedule report SWN_SELSEN still fail to trigger notification.
(2) Run report SWN_SELSEN_TEST with test Case 4 - Send One Message Only. It triggered notifications for all active workflow items and sent out several hundred emails including workflow item created in step 1. However, further test on new workflowitem, the schedule report SWN_SELSEN is still unable to trigger notification.
I think there may be something else missing, like the timestamp of delta. Please help.
Regards,
Donald

Hello,
I've experienced a few cases where stopping SWN_SELSEN and then restarting it helped to fill up SWN_TIMESTAMPS with proper values. How does that table look after you run it?
What is SWN_SELSEN_TEST?
Chck in SLG1 to get an idea of why it's not working. You can also run SWN_SELSEN in the foreground and debug it to see exactly where and why it goes wrong. Also check ST22.
regards
Rick Bakker
hanabi technology

Material Master and CMIR Texts not copied after Client Copy

Hi All,
We had a scenario wherein we had to copy our production client and create a new client (Preproduction). When we performed the client copy, i see that the texts maintained in material master (sales text) and Customer material info record are not not copied into the new client.
Can somebody suggest me a way out for this..
Thanks and Regards
Bhushan

Hi All ,
Closing this thread as the same have got copied into the new client after recopying..
Regards
Bhushan

Country key INR is not defined after client copy

Similar Messages

Maybe you are looking for