Country list in Connect Admin tool (dropdown)

Dear all,
It's me or the Nigeria is missed in the country list ? (In the dropdown when you create a Connect account)
Please add it (and the country code for phone +234 )
Muchas gracias

It seems that Americans have to update their geographic knowledge :
Zaïre is Democratic Republic of the Congo aka "Congo RDC" (since 1997 !!) Tel code : +243
Is missed in your list : Republic of the Congo (aka Congo Brazzaville) Tel code : +242
http://en.wikipedia.org/wiki/Congo

Similar Messages

Mac OS X Server 10.4 - connect admin tools from one network to another?

Hi,
This may seem quite strange, but I have to do some administration of a server one one network, while being within another one. It seems that if I am able to connect to the internet utside of the office network (e.g. on a public network using wireless), I can just fire upp the mac admin tools and do my work perfectly.
However, if I try to do the same while connected to the company network (which is governed by a OS X Server), I get nowhere. Can't even get a connection.
Is there a way to get around this?
/Fredrik

I've run the Server Admin tool over a VPN; from a Mac OS X client (with the tools installed) on a remote LAN to a firewall-based VPN end-point. Worked fine; this configuration can work.
It's possible here that you're encountering subnet routing, as various of the VPN solutions need either send all traffic over the VPN (there's a setting for that), or the local and the target LANs need be in separate and unique subnets. (As is my wont, I typically configure and use an outboard firewall. Not a host-based firewall.)
So this could be a firewall port or three that need be opened (as mentioned in in earlier reply), or this could be subnet routing.

BI admin tool - connect to a SharePoint list

Dear users,
is there any way to create sharepoint data source definition in bi admin tool?
In my project I would like to retrieve data from sharepoint list.
best regards.

Hi,
This is possible. Please refer to the below link on how to achieve this:
http://sureshotstrategies.wordpress.com/2008/09/19/sharepoint-integration-with-obiee/
Hope it helps.
Thanks,
-Amith.

Open and connect in OBI 11.1.1.5 admin tool fowwoling OBE Upgrade

I installed OBI11.1.1.5 on Redhat 5.2 and the admin tool on a windows. In this two machine I have OBI 10 server and admin tool installed as well. The OBI 11 components are all up running as I can access them such as EM and represention service.
Following OBEhttp://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/bi/bi11115/upgrade/upgrade_to_11g.htm?print=preview#t3 .I upgraded our 10g rpd and catalog and see the repository saved in instance_home, and verified that the default is RPD sh20110903_BI002.
Next step in the OBE, I verify Reposiotory Metadata. I launched the admin tool, opened inline. In the generated dialog box, I entered the password in defined in the update script as Repository Password, and used weblogic login in User/Password. All other fields are blank. That is all I can do in the dialog box, but the Open buttone is always grey. I think at least one available repository should be listed in the list box at the bottom, but it was empty.
Then I tried to create a new repository. In step 2 Select Data Source, I choose ODBC 3.5 and use a valid system DSN, but got Error : The connection has failed.
I tried also use Connection Type OCI 10g/11g. IN the Data Source Name I used a valid netservice name defined in a Oracle client's Oracle_HOME. But still got Error : The connection has failed.
Questions
1) How can make the Open button active in the Open inline RPD dialog box?
2) Why the valid System DSN failed to connect in 11g admin tool. It is OK in 10g admin tool and ODBC configure
3) How to make Admin Too; sees the tnsnames definition. Should I copy the tnsnames.ora file to somewhere under Admin Tool installation directory?
Many thanks.

Thanks. The post appares make sense. I opened my user.sh file and has 2 questions:
1) There are 32bit section and 64 bit section, and it states that 32 bit server must work with 32 bit client, so is for 64 bit. In my case, the clients are most likely 32 bit windows (browsers and admin tool), but the server is installed on Redhat 64 bit. Is this a problem? How do I know if my OBIEE iis running 64 or 32 bit?
2) All entries in the user.sh file are commented out. Then what file is used to in the current OBI11, it is started automatically after the installation.

Cannot Connect to new Installation with Admin Tool

Have installed BPC 7.5 SP4 Patch 4 on Windows 2008 64-bit. App/Web Server on one machine, SQL Server 2008 on 2nd machine,
Everything seems fine except access via servername - servername used in all the settings.
When trying to access the Administration to start installing new appsets, connect using ip address in admin tool and login using the software install user but will not verify user name/password.
Does anyone have any idea of the issue?
thanks
Lesley

In that case, I'd suggest you make sure both ethernet ports are unplugged from the RAID, power it off and on, plug a cable directly from a laptop to the RAID, set the IP of your laptop to 169.264.11.11 with subnet mask 255.255.0.0, then do "ping 255.255.255.255" and you should see a response from the IP address used by the RAID.
This question is very common here... there are other threads where I've answered this so I won't clarify further here.

Country list dropdown search by first letter doesn't work for some countries in the list

Hi,
We have this issue with the country list search in Travel Request with the drop down list when user is trying to choose the country by entering the first letter say C for Canada (finds Canada in the list) it works for the countries from A to O and doesn't work from P to Z.
It is NW7.31 portal
What seems to be the problem ?

Hi Denis
Get them to take a look at this wiki page:
http://wiki.scn.sap.com/wiki/x/2oQCFQ
It lists the latest notes for your basis version and the notes are usually cumulative which means if you apply the latest notes, it will bring in the pre-requisites and earlier notes too.
Hope it helps you Denis.
Sally

Dropdown country list search by first letter doesn't work for some countries in the list

Hi,
We have this issue with the country list search in Travel Request with the drop down list when user is trying to choose the country by entering the first letter say C for Canada (finds Canada in the list) it works for the countries from A to O and doesn't work from P to Z.
It is NW7.31 portal
What seems to be the problem ?

Hi Denis
Get them to take a look at this wiki page:
http://wiki.scn.sap.com/wiki/x/2oQCFQ
It lists the latest notes for your basis version and the notes are usually cumulative which means if you apply the latest notes, it will bring in the pre-requisites and earlier notes too.
Hope it helps you Denis.
Sally

Itunes and Admin tool do not see Airport on Windows XP

I tried to make an airport express work with my IBM T42P laptop with Windows XP work.
Neither the Airport Admin utility or Itunes detect the Airport Express. The strange thing though is, that I can see it in the wireless connections. I can even connect to it and use the network, ping the airport express etc... Didn't tryout routing, but connecting to another computer on the network works fine also... But still, Airpot Admin utility and Itunes cannot see anything.
The Airport Setup Assistant lists the airport, but times-out and cannot connect to it.
Tried to connect from another laptop and everything worked fine, so I figured maybe it's a problem with the builtin wi-fi on the t42. Tried the wifi card from the working laptop on the t42 and still same problem.
The Windows XP is with SP2.
Checked Wireless Zero Configuration Service version numbers: All are 5.1.2600.2180
The firewall has port 5353 UDP open. Additionally itunes and the admin tool are added to the firewall - also tried to stop the firewall service.
From the other laptop flashed the Airport Express with firmware-upgrade and upgraded airport express software on th t42.
Tried to switch of QOS and other services in the network settings.
At some point, tried to connect through ethernet and couldn't see the Airport. Could have been a problem with the rest of the network though. Connecting through the admin tool when choosing other and providing the ip-address of the airport is possible, but doesn't help itunes...
Nothing helped, so to summarize:
On the old T20 with Windows 2000 everything works fine.
The T42 can wifi-connect to the network, but neither itunes nor admin-utility can see the thing. The Airport Setup Assistant lists the airport, but times-out and cannot connect to it. Can't "Identify" either.
Any suggestions would be appreciated!
Thomas

To eliminate connectivity issues - cable the PC's ethernet port directly to the ethernet port of the Airport Express. If the Airport Admin Utility fails to list your Airport Express...
I know you said you stopped the firewall service... but the problem you are having is, in the vast majority of cases, because there is indeed still a firewall running on the PC - either the one built into Windows XP, and/or the one provided by third-party software, and/or the one installed by VPN client software.

Import metadata from BI Admin tool -OBIEE 11g

Hi,
I am trying to import metadata from BI Admin tool 11g (offile- did not start BI services) but it always showing "Connection has failed". I tried ODBC 2.0, ODBC 3.5, OCI11g/10g with different schemas .. But still no luck... I checked all those from Toad and DSN Tests.. then all are successfulll... But in BI Admin Tool only I can not connect to those Datasources.. Where Iam wrong..? any workarounds would be appreciated...
Thanks and Regards,
Sri.
(OBIEE 11.1.1.5, Oracle 11g R2 EE Database, MS Windows XP Professional Edition SP2)

ORACLE FOLDER
C:\Oracle\product\11.2.0\client_1\network\admin\sample
We have tnsnames.ora file in this oracle folder coppy that and save it in
C:\Oracle\product\11.2.0\client_1\network\admin
Tnsnames.ora
This tnsname.ora file should contain the details of
Data Source name – ORCL
Host name – xxxx.xxxxxx.com
Portno - 1531 (This port no is default port in oracle)
Service Name – ORCL
OBIEE FOLDER
C:\OBIEE\oraclebi\orainst\config\OracleBIServerComponent\coreapplication
Tnsname.ora (need to have this file in the above path which is same in ORACLE FOLDER)
GOTO – Start – Control panel – Administrative Tool – Data Source(ODBC) in this
1.     Goto System DSN tab
2.     Select Add at right side
3.     A new pop-up window opens – ‘Create New Data Source’
4.     Select from the list – Oracle in OraClient11g_Home
5.     A pop-up window opens –‘Oracle ODBC Driver Configaration’ in that
6.     Data Source name – Mandatory (You can give any name) e.g –ORACLE DSN
7.     Description – Optional (you can give r leave it blank).
8.     TNS Service Name – HOST:PORT/Data Source Name e.g –xxxx.xxxxxxx.com:1531/ORCL (xxxx.xxxxxx.com may be IP Address also)
9.     User ID – Give Database USERID (If you are going to take data from SERVER you have to give Server Data Base USER ID / If you are going to take data from Local Machine use your Local machine database User id ) e.g –USER id – ‘system’ where password is – ‘Manager’

Not able to import metadata using BI Admin tool

Hi folks,
I've installed OBIEE 11g server(Version 11.1.1.6.0) in my local machine which is lying on Windows 7 environment. Tried importing metadata(Oracle Database) using BI Admin tool, it throws "The Connection has failed" error.
I've copied TNSNAMES.ora file to the path D:\Oracle\Middleware\Oracle_BI1\network\admin and D:\Oracle\Middleware\oracle_common\network\admin(In D:\Oracle\Middleware\oracle_common\network, admin was not there, I've created a new folder with name admin and placed the TNSNAMES.ora file over there).
Have modified the user.cmd and bi_init.cmd files in the below path D:\Oracle\Middleware\instances\instance1\bifoundation\OracleBIApplication\coreapplication\setup
Any help would be appreciated
Regards,
Arun

Hi,
The problem was your tnsnames.ora file your not please in the right path.
Check this steps:
Copy the tnsnames.ora from Oracle Database home (ORACLE_HOME\NETWORK\ADMIN\) to the following locations.
Step 1 - <obiee11g_home>\OracleBI1\network\admin
Step 2 - <obiee11g_home>\oracle_common\network\admin
Set the TNS_ADMIN environment variable value with one of the copied locations in the step 1 in user.cmd or user.sh file depending on your OS.
This file will be found under <obiee11g_home>\instances\instance1\bifoundation\OracleBIApplication\coreapplication\setup
Solution:
Copy the tnsnames.ora from Oracle Database home (ORACLE_HOME\NETWORK\ADMIN\) to the following locations.
Step 1 - <obiee11g_home>\OracleBI1\network\admin
Set the TNS_ADMIN environment variable value with one of the copied locations in the step 1 in user.cmd or user.sh file depending on your OS.
This file will be found under <obiee11g_home>\instances\instance1\bifoundation\OracleBIApplication\coreapplication\setup
Run User.cmd or User.sh
Recheck below steps also.
ORACLE FOLDER
C:\Oracle\product\11.2.0\client_1\network\admin\sample
We have tnsnames.ora file in this oracle folder coppy that and save it in
C:\Oracle\product\11.2.0\client_1\network\admin
Tnsnames.ora
This tnsname.ora file should contain the details of
Data Source name – ORCL
Host name – xxxx.xxxxxx.com
Portno - 1531 (This port no is default port in oracle)
Service Name – ORCL
OBIEE FOLDER
C:\OBIEE\oraclebi\orainst\config\OracleBIServerComponent\coreapplication
Tnsname.ora (need to have this file in the above path which is same in ORACLE FOLDER)
GOTO – Start – Control panel – Administrative Tool – Data Source(ODBC) in this
1. Goto System DSN tab
2. Select Add at right side
3. A new pop-up window opens – ‘Create New Data Source’
4. Select from the list – Oracle in OraClient11g_Home
5. A pop-up window opens –‘Oracle ODBC Driver Configaration’ in that
6. Data Source name – Mandatory (You can give any name) e.g –ORACLE DSN
7. Description – Optional (you can give r leave it blank).
8. TNS Service Name – HOST:PORT/Data Source Name e.g –xxxx.xxxxxxx.com:1531/ORCL (xxxx.xxxxxx.com may be IP Address also)
9. User ID – Give Database USERID (If you are going to take data from SERVER you have to give Server Data Base USER ID / If you are going to take data from Local Machine use your Local machine database User id ) e.g –USER id – ‘system’ where password is – ‘Manager’
Note: If still not yer resloved Please read below threds.
Re: Error in Importing Metadata in OBIEE 11G
[46028] Unable to get the DLL path for the CLI xx from the NQSConfig.ini
Award points it is useful.
Thanks,
satya

HT1822 Mac OS X server admin tools: non-server editions of Mac OS 10.6?

On my iMac, I am running the installation of OS X that it shipped with + updates up to 10.6.8. I know there are server admin tools available on the Apple support website, that do stuff like manage groups. I am looking for a GUI to look at ALL the users, groups, permissions, etc. (including hidden ones like _www for apache) on my system, without having to dig through config files in /etc and/or use the dscl command line utility.
The referenced article says I can find the 10.6 tools on Apple support downloads:
Mac OS X Server v10.6
To administer Mac OS X Server v10.6, use the Server Admin Tools 10.6 on Mac OS X v10.6. You should match the version numbers of the server, tools, and admin workstation as closely as possible; for example, use Server Admin Tools version 10.6.8 on Mac OS X v10.6.8 to administer Mac OS X Server v10.6.8.
My questions are:
1. Where are the 10.6 tools on the apple support website? A search turns up versions for everything BUT 10.6.
2. Will the 10.6 tools work on 10.6.8 that is not a server edition of Mac OS?

The Server Tools you can download from Apple will install and run on OS X client, but they will only connect to and monitor OS X Server boxes.
So that won't get you where you want.
One command that will help you here - and which is present on OS X Server and OS X client - is dscl.
dscl . list /users
For details:
info dscl
or
man dscl
Or a web search, etc...

AS7.0b:JMS: can I browse the JNDI tree with the admin tool?[cid:792813]

Is there a way to browse the JNDI Tree thru the Admin Tool.
1) I have deployed a Topic Destination with the name jms/AuditTopic,
jms/MonitorTopic
2) I have deployed a MDB with the name AuditAgent which is tied to
jms/AuditTopic
when the server is deploying the AuditAgent MDB it throws the following
error:
INFO: JMS5002: Binding [< JMS Destination: jms/MonitorTopic,
javax.jms.Topic, No properties >]
SEVERE: JMS5027: Exception in creating JMS destination administered object
[jms/MonitorTopic]: [[A4017]: Destination name is not specified.]
SEVERE: JMS5031: Exception in creating JMS destination administered object
javax.jms.JMSException: [A4017]: Destination name is not specified.
at com.sun.messaging.jmq.admin.jmsspi.JMSAdminImpl.createDestinationObject(JMSAdminImpl.java:193)
at com.iplanet.ias.jms.IASJmsConfig.createDestination(UnknownSource)
at com.iplanet.ias.jms.IASJmsUtil.installJMSResources(UnknownSource)
at com.sun.enterprise.resource.ResourceInstaller.installJMSResources(UnknownSource)
at com.sun.enterprise.server.J2EEServer.run(Unknown Source)
at com.sun.enterprise.server.J2EEServer.main(Unknown Source)
at com.iplanet.ias.server.ApplicationServer.onInitialization(UnknownSource)
at com.iplanet.ias.server.J2EERunner.confPreInit(Unknown Source)
INFO: JMS5002: Binding [< JMS Destination: jms/AuditTopic, javax.jms.Topic,
No properties >]
SEVERE: JMS5027: Exception in creating JMS destination administered object
[jms/AuditTopic]: [[A4017]: Destination name is not specified.]
SEVERE: JMS5031: Exception in creating JMS destination administered object
javax.jms.JMSException: [A4017]: Destination name is not specified.
at com.sun.messaging.jmq.admin.jmsspi.JMSAdminImpl.createDestinationObject(JMSAdminImpl.java:193)
at com.iplanet.ias.jms.IASJmsConfig.createDestination(UnknownSource)
at com.iplanet.ias.jms.IASJmsUtil.installJMSResources(UnknownSource)
at com.sun.enterprise.resource.ResourceInstaller.installJMSResources(UnknownSource)
at com.sun.enterprise.server.J2EEServer.run(Unknown Source)
at com.sun.enterprise.server.J2EEServer.main(Unknown Source)
at com.iplanet.ias.server.ApplicationServer.onInitialization(UnknownSource)
at com.iplanet.ias.server.J2EERunner.confPreInit(Unknown Source)
INFO: JMS5002: Binding [< JMS Connection Factory:
jms/TopicConnectionFactory, javax.jms.TopicConnectionFactory, No properties>]
FINE: ++++ Entered SecClientRequestInterceptor::send_request()
SEVERE: NAM5005: JMS Destination object not found: jms/AuditTopic
SEVERE: javax.naming.NameNotFoundException
javax.naming.NameNotFoundException: AuditTopic not found
at com.sun.enterprise.naming.TransientContext.doLookup(Unknown Source)
at com.sun.enterprise.naming.TransientContext.lookup(Unknown Source)
at com.sun.enterprise.naming.TransientContext.lookup(Unknown Source)
at com.sun.enterprise.naming.SerialContextProviderImpl.lookup(Unknown Source)
at org.omg.stub.com.sun.enterprise.naming._SerialContextProviderImpl_Tie._invoke(Unknown Source)
at com.sun.corba.ee.internal.corba.ServerDelegate.dispatch(Unknown Source)
at com.sun.corba.ee.internal.iiop.ORB.process(Unknown Source)
at com.sun.corba.ee.internal.iiop.LocalClientRequestImpl.invoke(Unknown Source)
at com.sun.corba.ee.internal.corba.ClientDelegate.invoke(Unknown Source)
at com.sun.corba.ee.internal.corba.ClientDelegate.invoke(Unknown Source)
at org.omg.CORBA.portable.ObjectImpl._invoke(ObjectImpl.java:457)
at org.omg.stub.com.sun.enterprise.naming._SerialContextProvider_Stub.lookup(Unknown Source)
at com.sun.enterprise.naming.SerialContext.lookup(Unknown Source)
at javax.naming.InitialContext.lookup(InitialContext.java:347)
at com.sun.enterprise.naming.NamingManagerImpl.bindObjects(Unknown Source)
at com.sun.ejb.containers.BaseContainer.setupEnvironment(Unknown Source)
at com.sun.ejb.containers.BaseContainer.<init>(Unknown Source)
at com.sun.ejb.containers.MessageBeanContainer.<init>(Unknown Source)
at com.sun.ejb.containers.ContainerFactoryImpl.createContainer(Unknown Source)
at com.iplanet.ias.server.AbstractLoader.loadEjbs(Unknown Source)
at com.iplanet.ias.server.ApplicationLoader.load(Unknown Source)
at com.iplanet.ias.server.AbstractManager.load(Unknown Source)
at com.iplanet.ias.server.ApplicationServer.loadDeployedApplications(Unknown Source)
at com.iplanet.ias.server.ApplicationServer.onStartup(Unknown Source)
at com.iplanet.ias.server.J2EERunner.confPostInit(Unknown Source)
SEVERE: EJB5016: Exception creating BaseContainer :
[javax.naming.InvalidNameException: JMS Destination object not
found:`jms/AuditTopic`]
FINE: EJB5016: Exception creating BaseContainer : [{0}]
javax.naming.InvalidNameException: JMS Destination object not
found:`jms/AuditTopic`
at com.sun.enterprise.naming.NamingManagerImpl.bindObjects(Unknown Source)
at com.sun.ejb.containers.BaseContainer.setupEnvironment(Unknown Source)
at com.sun.ejb.containers.BaseContainer.<init>(Unknown Source)
at com.sun.ejb.containers.MessageBeanContainer.<init>(Unknown Source)
at com.sun.ejb.containers.ContainerFactoryImpl.createContainer(Unknown Source)
at com.iplanet.ias.server.AbstractLoader.loadEjbs(Unknown Source)
at com.iplanet.ias.server.ApplicationLoader.load(Unknown Source)
at com.iplanet.ias.server.AbstractManager.load(Unknown Source)
at com.iplanet.ias.server.ApplicationServer.loadDeployedApplications(Unknown Source)
at com.iplanet.ias.server.ApplicationServer.onStartup(Unknown Source)
at com.iplanet.ias.server.J2EERunner.confPostInit(Unknown Source)
SEVERE: EJB5090: Exception in creating EJB container
[javax.naming.InvalidNameException: JMS Destination object not
found:`jms/AuditTopic`]
WARNING: LOADER5004: UnExpected error occured while creating ejb container
javax.naming.InvalidNameException: JMS Destination object not
found:`jms/AuditTopic`
at com.sun.enterprise.naming.NamingManagerImpl.bindObjects(Unknown Source)
at com.sun.ejb.containers.BaseContainer.setupEnvironment(Unknown Source)
at com.sun.ejb.containers.BaseContainer.<init>(Unknown Source)
at com.sun.ejb.containers.MessageBeanContainer.<init>(Unknown Source)
at com.sun.ejb.containers.ContainerFactoryImpl.createContainer(Unknown Source)
at com.iplanet.ias.server.AbstractLoader.loadEjbs(Unknown Source)
at com.iplanet.ias.server.ApplicationLoader.load(Unknown Source)
at com.iplanet.ias.server.AbstractManager.load(Unknown Source)
at com.iplanet.ias.server.ApplicationServer.loadDeployedApplications(Unknown Source)
at com.iplanet.ias.server.ApplicationServer.onStartup(Unknown Source)
at com.iplanet.ias.server.J2EERunner.confPostInit(Unknown Source)
FINE:
org.omg.CORBA.OBJ_ADAPTER: NoContext: outside of an invocation context.
vmcid: 0x0 minor code: 0 completed: No
at com.sun.corba.ee.internal.POA.DelegateImpl.poa(Unknown Source)
at org.omg.PortableServer.Servant._poa(Servant.java:99)
at com.rai.common.inbound._InboundManagerBean_EJBObjectImpl_Tie.deactivate(Unknown Source)
at com.sun.corba.ee.internal.javax.rmi.CORBA.Util.cleanUpTie(Unknown Source)
at com.sun.corba.ee.internal.javax.rmi.CORBA.Util.unexportObject(Unknown Source)
at javax.rmi.CORBA.Util.unexportObject(Util.java:159)
at com.sun.enterprise.iiop.POAProtocolMgr.destroyReference(Unknown Source)
at com.sun.ejb.containers.StatelessSessionContainer.undeploy(Unknown Source)
at com.iplanet.ias.server.AbstractLoader.unloadEjbs(Unknown Source)
at com.iplanet.ias.server.AbstractLoader.loadEjbs(Unknown Source)
at com.iplanet.ias.server.ApplicationLoader.load(Unknown Source)
at com.iplanet.ias.server.AbstractManager.load(Unknown Source)
at com.iplanet.ias.server.ApplicationServer.loadDeployedApplications(Unknown Source)
at com.iplanet.ias.server.ApplicationServer.onStartup(Unknown Source)
at com.iplanet.ias.server.J2EERunner.confPostInit(Unknown Source)
3)Some extra error and warnings follow:
FINE: No SAS context element found in service context list
WARNING:
java.io.IOException: Invalid indirection to offset 2940
at com.sun.corba.se.internal.io.IIOPInputStream.throwExceptionType(Native Method)
at com.sun.corba.se.internal.io.IIOPInputStream.simpleReadObject(IIOPInputStream.java:274)
at com.sun.corba.se.internal.io.ValueHandlerImpl.readValueInternal(ValueHandlerImpl.java:247)
at com.sun.corba.se.internal.io.ValueHandlerImpl.readValue(ValueHandlerImpl.java:209)
at com.sun.corba.ee.internal.iiop.CDRInputStream_1_0.read_value(Unknown Source)
at com.sun.corba.ee.internal.iiop.CDRInputStream.read_value(Unknown Source)
at com.sun.corba.ee.internal.corba.TCUtility.unmarshalIn(Unknown Source)
at com.sun.corba.ee.internal.corba.AnyImpl.read_value(Unknown Source)
at com.sun.corba.ee.internal.iiop.CDRInputStream_1_0.read_any(Unknown Source)
at com.sun.corba.ee.internal.iiop.CDRInputStream.read_any(Unknown Source)
at com.sun.corba.ee.internal.javax.rmi.CORBA.Util.readAny(Unknown Source)
at javax.rmi.CORBA.Util.readAny(Util.java:90)
at org.omg.stub.com.sun.enterprise.naming._SerialContextProviderImpl_Tie._invoke(Unknown Source)
at com.sun.corba.ee.internal.corba.ServerDelegate.dispatch(Unknown Source)
at com.sun.corba.ee.internal.iiop.ORB.process(Unknown Source)
at com.sun.corba.ee.internal.iiop.LocalClientRequestImpl.invoke(Unknown Source)
at com.sun.corba.ee.internal.corba.ClientDelegate.invoke(Unknown Source)
at com.sun.corba.ee.internal.corba.ClientDelegate.invoke(Unknown Source)
at org.omg.CORBA.portable.ObjectImpl._invoke(ObjectImpl.java:457)
at org.omg.stub.com.sun.enterprise.naming._SerialContextProvider_Stub.rebind(Unknown Source)
at com.sun.enterprise.naming.SerialContext.rebind(Unknown Source)
at com.sun.enterprise.naming.SerialContext.rebind(Unknown Source)
at javax.naming.InitialContext.rebind(InitialContext.java:367)
at com.sun.enterprise.naming.NamingManagerImpl.publishObject(Unknown Source)
at com.sun.enterprise.naming.NamingManagerImpl.publishObject(Unknown Source)
at com.sun.enterprise.resource.ResourceInstaller.installJDBCConnectionPoolResource(Unknown Source)
at com.sun.enterprise.resource.ResourceInstaller.installJDBCConnectionPoolResources(Unknown Source)
at com.sun.enterprise.resource.ResourceInstaller.installJdbcDataSources(Unknown Source)
at com.sun.enterprise.server.J2EEServer.run(Unknown Source)
at com.sun.enterprise.server.J2EEServer.main(Unknown Source)
at com.iplanet.ias.server.ApplicationServer.onInitialization(Unknown Source)
at com.iplanet.ias.server.J2EERunner.confPreInit(Unknown Source)
FINE:
org.omg.CORBA.MARSHAL: Unable to read value from underlying bridge : Invalid
indirection to offset 2940 vmcid: SUN minor code: 211 completed: Maybe
at com.sun.corba.ee.internal.iiop.CDRInputStream_1_0.read_value(Unknown Source)
at com.sun.corba.ee.internal.iiop.CDRInputStream.read_value(Unknown Source)
at com.sun.corba.ee.internal.corba.TCUtility.unmarshalIn(Unknown Source)
at com.sun.corba.ee.internal.corba.AnyImpl.read_value(Unknown Source)
at com.sun.corba.ee.internal.iiop.CDRInputStream_1_0.read_any(Unknown Source)
at com.sun.corba.ee.internal.iiop.CDRInputStream.read_any(Unknown Source)
at com.sun.corba.ee.internal.javax.rmi.CORBA.Util.readAny(Unknown Source)
at javax.rmi.CORBA.Util.readAny(Util.java:90)
at org.omg.stub.com.sun.enterprise.naming._SerialContextProviderImpl_Tie._invoke(Unknown Source)
at com.sun.corba.ee.internal.corba.ServerDelegate.dispatch(Unknown Source)
at com.sun.corba.ee.internal.iiop.ORB.process(Unknown Source)
at com.sun.corba.ee.internal.iiop.LocalClientRequestImpl.invoke(Unknown Source)
at com.sun.corba.ee.internal.corba.ClientDelegate.invoke(Unknown Source)
at com.sun.corba.ee.internal.corba.ClientDelegate.invoke(Unknown Source)
at org.omg.CORBA.portable.ObjectImpl._invoke(ObjectImpl.java:457)
at org.omg.stub.com.sun.enterprise.naming._SerialContextProvider_Stub.rebind(Unknown Source)
at com.sun.enterprise.naming.SerialContext.rebind(Unknown Source)
at com.sun.enterprise.naming.SerialContext.rebind(Unknown Source)
at javax.naming.InitialContext.rebind(InitialContext.java:367)
at com.sun.enterprise.naming.NamingManagerImpl.publishObject(Unknown Source)
at com.sun.enterprise.naming.NamingManagerImpl.publishObject(Unknown Source)
at com.sun.enterprise.resource.ResourceInstaller.installJDBCConnectionPoolResource(Unknown Source)
at com.sun.enterprise.resource.ResourceInstaller.installJDBCConnectionPoolResources(Unknown Source)
at com.sun.enterprise.resource.ResourceInstaller.installJdbcDataSources(Unknown Source)
at com.sun.enterprise.server.J2EEServer.run(Unknown Source)
at com.sun.enterprise.server.J2EEServer.main(Unknown Source)
at com.iplanet.ias.server.ApplicationServer.onInitialization(Unknown Source)
at com.iplanet.ias.server.J2EERunner.confPreInit(Unknown Source)
FINE: ++++ Entered SecClientRequestInterceptor::receive_exception
SEVERE: RSR5049:Error publishing JDBC connection Pool Resource
javax.naming.CommunicationException: java.rmi.MarshalException: CORBA
MARSHAL 1398079699 Maybe; nested exception is:
org.omg.CORBA.MARSHAL: vmcid: SUN minor code: 211 completed:
Maybe
at com.sun.enterprise.naming.SerialContext.rebind(Unknown Source)
at com.sun.enterprise.naming.SerialContext.rebind(Unknown Source)
at javax.naming.InitialContext.rebind(InitialContext.java:367)
at com.sun.enterprise.naming.NamingManagerImpl.publishObject(Unknown Source)
at com.sun.enterprise.naming.NamingManagerImpl.publishObject(Unknown Source)
at com.sun.enterprise.resource.ResourceInstaller.installJDBCConnectionPoolResource(Unknown Source)
at com.sun.enterprise.resource.ResourceInstaller.installJDBCConnectionPoolResources(Unknown Source)
at com.sun.enterprise.resource.ResourceInstaller.installJdbcDataSources(Unknown Source)
at com.sun.enterprise.server.J2EEServer.run(Unknown Source)
at com.sun.enterprise.server.J2EEServer.main(Unknown Source)
at com.iplanet.ias.server.ApplicationServer.onInitialization(Unknown Source)
at com.iplanet.ias.server.J2EERunner.confPreInit(Unknown Source)
FINE: ++++ Entered SecClientRequestInterceptor::send_request()
FINE: Security context is null (nothing to add to service context)
FINE: No SAS context element found in service context list

Hi Rohit,
Thanks for your response..
Below is the BLAdminTopic configuration.Please let me know if you need any further info.
Topic:BLAdminTopic
Type:Distributed Topic
JNDI:jms/BLAdminTopic
Sub Deployment :N/A
Target:N/A
BLAdminTopic@jmsnode1BL Topic jms/BLAdminTopic@jmsnode1BL BLAdminTopic@jmsnode1BL jmsnode1BL
BLAdminTopic@jmsnode2BL Topic jms/BLAdminTopic@jmsnode2BL BLAdminTopic@jmsnode2BL jmsnode2BL
Regards,
Jyotiranjan

Configuration error when open admin tool in BIEE 11g client

Hi All,
I have installed BIEE 11g client in my laptop,the version is 11.1.6.2 ,it has show one error in the installation log :
<action name="Custom Action" target="oracle.bi.CustomIAActionGetInstanceNumber" status="error">
- <AdditionalNotes>
<error>class oracle.bi.CustomIAActionGetInstanceNumber.install() runtime exception:</error>
</AdditionalNotes>
After installation,when I try to open the admin tool in start menu,it show configuration error , but I can open the admin tool through installation directory.
And when I try to import metadata,it also shows connection has failed.
Can any body give some helps on this,thanks a lot.
Ryan.
Edited by: 997662 on Apr 5, 2013 1:39 AM

Hi,
Let me know which version you are using (OBIEE) ?
you are trying to install Client (Admin Tool) and OBIEE server in same machine ?
Thx,

Admin tool error: Physical database already exists

Hello Gurus,
I am using OBIEE 11.1.1.3 and trying to import a new Essbase ASO cube into my RPD using the Admin Tool. I am getting the error message "Physical database already exists, but it is not of the same provider type". The cube is new and not in my rpd yet so why is it saying it exists? Is there a way to search for it in case it is in there?
Thanks very much for your help.
Regards,
JennC
Edited by: user754680 on May 13, 2011 5:06 PM

You can search for the Tables, Cubes, Databases etc that are already in the repository. Just click on tools in the admin tool and select query repository. Here you can select from the drop down list what you are looking for and leave the name as * if you want to search for everything.
Hope this helps.
Thanks,
-Amith.

Admin tool could not load the essbase driver.Please check the configuration

Hi All,
I have obiee11g installed machine and want to connect that machine with essbase.
For that I have installed Essbase Client [11.1.2.1] by downloading the following files,
*1>Oracle Hyperion Enterprise Performance Management System Installer Fusion Edition Release 11.1.2.0.0 for Microsoft Windows (32-bit)*
*2>Hyperion Enterprise Performance Management System Foundation Services Release 11.1.2.0 for Microsoft Windows (32-bit) Part 1 of 4*
*3>Oracle Essbase Clients Release 11.1.2.0.0 for Microsoft Windows (32-bit)*
After that I manually added the ESSBASEPATH and ARBORPATH as Environment Variables (USER).
And also I manually added the essbasepath in bi-init.cmd file.
Finally I tried to connect essbase with BI through BI Admin Tool, I get the following Error
"*Admin tool could not load the essbase driver.Please check the configuration*."
kindly guide me to overcome this issue.
Thanks and Regards
sai
Edited by: 923924 on Apr 24, 2012 5:20 AM

Until you perform the configuration on the AD server, the following message will appear:
Error: Could not start the SSO service. Please check the configuration.
So configure the AD server so that the error message will not appear again.

Country list in Connect Admin tool (dropdown)

Similar Messages

Maybe you are looking for