Country name and code in Form

Hi all,
I have found that in Printout in F.27 (Correspondence), Country and Country code is not showing.
same I have checked form F140_ACC_STAT_01, in SE71. There it is showing Country name and code.
But it is not showing the same in output
Pl advise
Raju

Hi Michael,
Thank you for your reply.
Could you advise yow to change this to see the Country Name and Code in Print form
Thanks & Regards,
Venkataraju

Similar Messages

Country name and region name in smartform

hi friends
1. In smart forms I want to display country name and region name in template text .
can any one help me how could I write code for it and the procedure.
2. IN scripts komk-fwkrt = '1.00.200,32'.
but it should be displayed as 1,00,200.32
how should I make changes for this field?
thanks and regards
deepika.

Hi deepika,
For your first question, I happened to have written similiar codes recently.
If you have the country code and region code, you can read the country name from table T005 and region name from T005s.
You can create a new routine for this and call it from Initialization.
Hope this helps.
Shane
Edited by: Shane Chen on Jul 15, 2009 10:35 AM

If you have the iPhone 4s and you buy the iwork...later when you change your phone to iPhone 5 with the same app name and code the iwork still free to download into your new phone???

if you have the 4s and you buy the iwork...later when you change your phone to 5 with the same app name and code the iwork still free to download into your new phone???

Yes as long as you use the same Apple ID for iTunes that you used to download the app originally.
Hope that helps

Names and codes for enterprise structure

HI all,
I would like to know the right procedure for giving the naming conventions for the enterprise structure. whether should crete with alpha numeric or numeric or only alphabets are also accepted.
Let point of time if we go for upgrades, will there be any problem.
Your suggestion will be highly appreciated.

Numeric / Alphabetical / Alphenumeric which ever is good for your client. All are supported in SAP and upgrades.
Numeric is most widely used.
Regards
Sai

FI Correspondence Print Country Name in all Addresses

Hi Experts,
I am using form script to print payment advice as correspondence and below is script (SAP standard) I am using in element "Address". My client has the requirement that even if the vendor is local (of same country) then also in the address data COUNTRY NAME should be printed.
I understand there is some conceptual logic due to which for local country addresses country name is not printed.
Any way through which we can print country name even for the local vendors?
/:   ADDRESS PARAGRAPH AS
/:   TITLE       &REGUH-ZANRE&
/    :NAME        &REGUH-ZNME1&, &REGUH-ZNME2&, &REGUH-ZNME3&, &REGUH-ZNME4&
/:   STREET      &REGUH-ZSTRA&
/:   POBOX       &REGUH-ZPFAC& CODE &REGUH-ZPST2& CITY &REGUH-ZPFOR&
/:   POSTCODE    &REGUH-ZPSTL&
/:   CITY        &REGUH-ZORT1&, &REGUH-ZORT2&
/:   REGION      &REGUH-ZREGI&
/:   COUNTRY     &REGUH-ZLAND&
/*   FROMCOUNTRY &T001-LAND1&
/* Inserted,see Sap Note 167440
/:   ADDRESSNUMBER &REGUH-ZADNR&
/: ENDADDRESS
Thanks and Regards,
Prashant Rane

Hi Michael,
Thank you for your reply.
Could you advise yow to change this to see the Country Name and Code in Print form
Thanks & Regards,
Venkataraju

How to find output type givenSapscript form name and print program name

Hi Experts,
Can anyone tell me how to find the output type of a sapscript form if the print program name and sapscript form name is
known.

Hi,
There are two ways:
1. Use table TNAPR .. Here is table give PGNAM as your print program name and FONAM as form name.. Now the field KSCHL will be the output type assigned to your script.
2. You can also check the NACE t-code.. In that select a application(Corresponds to your area) -> click on Output types tab -> Here you get list of output type.. You need click on Processing Routine folder to get all other info..

Country name in address (note 40467)

Hi
I would need to customize the set up for country name print in all forms. The name of a country is now printed in short style (eg DE-12345) and it does not help to use the advise given in SAP note 40467 to run report RS005ADR to set the indicator "Print country description" T005-XADDR.
What could be wrong and how could we print the address the way below for foreign letters:
Name
Street
Postcode City
Country
Br
F

Hello,
The FM uses postal regulations for printing the country. So it won't print the country if the from and to countries are the same.
i.e. if the address is in Canada and the send from is Canada, don't bother printing the country.
The EU has it's own little quirk of printing the country as a single character before the postal code when mailing another EU country.
i.e. Sending from Germany to France you'll see F-##### instead of France
Oh, and the country is in the language of the sending country unless you set it otherwise (If I'm sending from Canada to China, Canada Post needs to be able to read CHINA to know what international bin to toss it into).
VD03 doesn't know the sender country so it always shows the country.
Thank you,
Michael

Anytime i try and eprint from my ipad the printer says i need a proxy server and code?

Bought new Photosmart 6510e all in one. Set up went well including wireless internet setup. When I try to use my ipad and send document to print the printer says I need a "Proxy server name and code" I don't know what this means or how to find this server?
What can I do to get this going?The computer I have is an Acer with Windows Vista.

Hello Manny12,
I would start but suggesting you power cycle the printer. You can do this by following these steps:
While the printer is still on, unplug the power cord from the printer, leave it unplugged for 30 seconds, then reconnect the power cord to the printer. Once plugged back in the printer should power on automatically.
You also may try restoring the network defaults and re-connecting your printer back to your wireless network. If you are still experiencing issues you may also want to disable and re-enable Web Services.
If you have any further issues or questions you can reply to this post and I will try to assist you.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

HT1051 Trying to change Shipping and Delivery address for one in the US, from Canada, and can't do it. State and zip code appears in red but no change in country name. Using French (Canada) iPhoto app.

Trying to change Shipping and Delivery address for one in the US, from Canada, and can't do it. State and zip code appears in red but no change in country name. Using French (Canada) iPhoto app.

Larry's right, You can still use your credit card, you just need to change the "billing address" to the recievers address. It gets billed to your CC and delivered to the US

Ship to Party address is missing country name in SAPScript FORM

Hi All,
i had modified the form for displaying the address of the Ship - to - party address, but the country name is missing in the FORM output, can any body suggest a solution for this..
here is the code that i had written...
FORM get_addr TABLES intab TYPE t_intab
              out_tab TYPE t_outtab.
DATA : wa_intab LIKE itcsy,
         w_outtab LIKE itcsy.
DATA v_adrnr_we TYPE adrc-addrnumber.
READ TABLE intab INTO wa_intab INDEX 1.
v_adrnr_we = wa_intab-value.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
      input = v_adrnr_we
    IMPORTING
      output = v_adrnr_we.
SELECT SINGLE * FROM adrc WHERE addrnumber = v_adrnr_we.
READ TABLE out_tab INTO w_outtab WITH KEY name = 'Z_NAME1'.
IF sy-subrc EQ 0.
    w_outtab-value = adrc-name1.
    MODIFY out_tab FROM w_outtab INDEX sy-tabix.
ENDIF.
READ TABLE out_tab INTO w_outtab WITH KEY name = 'Z_NAME2'.
IF sy-subrc EQ 0.
    w_outtab-value = adrc-name2.
    MODIFY out_tab FROM w_outtab INDEX sy-tabix.
ENDIF.
READ TABLE out_tab INTO w_outtab WITH KEY name = 'Z_NAME3'.
IF sy-subrc EQ 0.
    w_outtab-value = adrc-name3.
    MODIFY out_tab FROM w_outtab INDEX sy-tabix.
ENDIF.
READ TABLE out_tab INTO w_outtab WITH KEY name = 'Z_NAME4'.
IF sy-subrc EQ 0.
    w_outtab-value = adrc-name4.
    MODIFY out_tab FROM w_outtab INDEX sy-tabix.
ENDIF.
READ TABLE out_tab INTO w_outtab WITH KEY name = 'Z_STREET'.
IF sy-subrc EQ 0.
    w_outtab-value = adrc-street.
    MODIFY out_tab FROM w_outtab INDEX sy-tabix.
ENDIF.
READ TABLE out_tab INTO w_outtab WITH KEY name = 'Z_CITY1'.
IF sy-subrc EQ 0.
    w_outtab-value = adrc-city1.
    MODIFY out_tab FROM w_outtab INDEX sy-tabix.
ENDIF.
READ TABLE out_tab INTO w_outtab WITH KEY name = 'Z_CITY2'.
IF sy-subrc EQ 0.
    w_outtab-value = adrc-city2.
    MODIFY out_tab FROM w_outtab INDEX sy-tabix.
ENDIF.
CLEAR adrc.
ENDFORM.                    "GET_ADDR
and in the form editor it was like this.....
PERFORM GET_NAME IN PROGRAM ZSD_SDPACKLI
USING &VBPLA-ADRNR_WE&
CHANGING &Z_NAME1&
CHANGING &Z_NAME2&
CHANGING &Z_NAME3&
CHANGING &Z_NAME4&
CHANGING &Z_STREET&
CHANGING &Z_CITY1&
CHANGING &Z_CITY2&
ENDPERFORM
ADDRESS DELIVERY PARAGRAPH AS\
NAME     &Z_NAME1&, &Z_NAME2&, &Z_NAME3&, &Z_NAME4&
STREET   &Z_STREET&
CITY     &Z_CITY1&, &Z_CITY2&
POSTCODE &VBPLA-PSTLZ_WE&
COUNTRY &VBPLA-LAND1_WE&
REGION   &VBPLA-REGIO_WE&
FROMCOUNTRY &VBPLA-LAND1_VST&
ENDADDRESS
Thanks in advance..!

Hi Abaper,
In ADRC table,you will have a field by name COUNTRY.This holds the country key.
Using this country key LAND1 in ADRC table,you will have to fetch the Country name from T005T table.The field in the T005T which holds the Country name is LANDX.
You will have to write select querries for this.
By using LANDX from T005T table ,you can display the country name.
Regards,
Kashyap Ivaturi

Hide password and user name fields in secure form on landing page

On a landing page I don't want the password or user name displayed in the "secure" form because I think it will keep people from downloading our e-book. It will cause what some refer to as too much friction—visitors will feel that we are asking too much of them just to download an e-book so won't do it.
I found somewhere where the user name can be populated with the e-mail address, although I couldn't figure out where to put the code to make it work.
Can the password fields also be auto-populated and hidden so the user can access the secure zone to download the e-book never even knowing that they had a user name and password assigned to them?
I'd really appreciate some help here and please keep in mind that html and css is where my expertise stops so if there is a java solution I will need the code and how and where to add it.
Many thanks for your help.
John

This article just might point you in the right direction: http://kb.worldsecuresystems.com/853/cpsid_85381.html

Table name from which to extract bank name and swift code by key field as vendor code

Please help with the table name from which we can extract the bank name and swift code of vendors with the key input as vendor numbers

Hello Subhadra, I'm sorry, I should've said join of LFBK and BNKA. The fields for the join will be the bank country(BANKS) and bank key (BANKL).
If you have not found a docu on SQVI already, you can refer to this:
How to create Report by using SQVI
This is how your join should look in BASIS mode, your selection parameter should be vendor code LIFNR; output fields with be bank name BANKA and swift code SWIFT.

Forms 6i Error Messages and Codes Manual

Does Forms6i have a separate Error Messages and Codes Manual the way Form4.5 had ?
Thanks.

Hi John,
Help on Built-ins & Error Messages are in Forms itself.
Click the Help Menu (Extreme Right) => Form Builder Help Topics. Type the Error Number (eg. FRM-10000)/ Built-in Name. It provides list of related topics, click Display and detail help is provided.
Have a nice day.
Mohammed Osman

How do i fix the "web form must capture customer name and email address" error?

Hi all,
I have a webform that is submitting securely to the bc servers. I get the response:
{"SystemMessage": { "success": False, "message": "ERROR: An error occurred. Your web form must capture customer name and email address. Please fix this issue and re-insert your web form on your web page." }}
I have verified that the "FirstName","LastName","EmailAddress" are actually gettting sent with their corresponding values. I can't seem to figure out why i keep getting this error. Can someone please lend a helping hand?!? Thanks guys... here's my code:
var rAction = 'https://site.worldsecuresystems.com/FormProcessv2.aspx?WebFormID=85886&OID={module_oid}&OTYPE={module_otype}&EID={module_eid}&CID={module_cid}&CC={module_urlcountryc ode}&Referrer={module_siteurl,true,true}&JSON=1';
var rData = 'FirstName='+escape(fName.val())+'&LastName='+escape(lName.val())+'&EmailAddress='+escape (email.val())+'&Username='+escape(username.val())+'&Password='+escape(passwd.val())+'&Pass wordConfirm='+escape(passwd2.val())+'&BillingAddress='+escape(baddress.val())+'&BillingCit y='+escape(bcity.val())+'&BillingState='+escape(bstate.val())+'&BillingZip='+escape(bzip.v al())+'&PaymentMethodType='+escape(paymentMethodType)+'&CardName='+escape(cName.val())+'&C ardNumber='+escape(cNum.val())+'&CardExpiryMonth='+escape(expMonth)+'&CardExpiryYear='+esc ape(expYear)+'&CardType='+escape(cType)+'&CardCCV='+escape(ccv.val())
$.ajax({
type: 'POST',
url: rAction,
data: rData,
success: function(msg){
console.log('success');
$('#result').html(msg);
error: function(msg){
console.log('error');
$('#result').html(msg);

Ok -- after testing this out a little on my own I think it must have to do with not properly serialzing the data you are passing in the ajax function. In the example I linked to earlier they are just serialzing the form data and it works because it converts the data in the form's input fields to URL encoded notation.
If you aren't using an actual form on your site to mimick the example I linked to then when building your "rData" string instead of using the "escape" function for each of the parameter values, you should be using the "encodeURIComponent" function instead which instead of escaping characters will convert it to URL encoded notation. That's probably your issue. Here's more about encodeURIComponent(): http://www.w3schools.com/jsref/jsref_encodeURIComponent.asp
Try this with the rData variable instead:
var rData = 'FirstName='+encodeURIComponent(fName.val())+'&LastName='+encodeURIComponent(lName.val()) +'&EmailAddress='+encodeURIComponent(email.val())+'&Username='+encodeURIComponent(username .val())+'&Password='+encodeURIComponent(passwd.val())+'&PasswordConfirm='+encodeURICompone nt(passwd2.val())+'&BillingAddress='+encodeURIComponent(baddress.val())+'&BillingCity='+en codeURIComponent(bcity.val())+'&BillingState='+encodeURIComponent(bstate.val())+'&BillingZ ip='+encodeURIComponent(bzip.val())+'&PaymentMethodType='+encodeURIComponent(paymentMethod Type)+'&CardName='+encodeURIComponent(cName.val())+'&CardNumber='+encodeURIComponent(cNum. val())+'&CardExpiryMonth='+encodeURIComponent(expMonth)+'&CardExpiryYear='+encodeURICompon ent(expYear)+'&CardType='+encodeURIComponent(cType)+'&CardCCV='+encodeURIComponent(ccv.val ())

PLD cant print Country name when I link country code field to OCRY variable

Dear Experts,
I am using PLD, and from the database variable OCRD we have the OCRD.Country field which returns a Country Code, I link it to a OCRY.Name database variable, hoping this variable can print me the country name.
However, it doesn't, what am I missing here? Is it a PLD bug?
Thanks!
Warmest Regards,
Chinho

Hi Chinho,
You are welcome.
The link to is slightly different.
Say if you added a database field to a layout such as contact name. Next to the contact name you may have a text field that contains the text "Contact:" This will look on the layout like
Contact: Joe Bloggs
You can link the "Contact:" text field to the field ID of the database field, if you do that and the database field is empty then the text "Contact:" will not show.
There are a few other uses, you can link a field to a formula field, an example might be that a customer wants to show a big logo on page 1 of documents, if it runs on to multiple pages show a smaller logo. Here you can add the following fields.
1. A big picture field showing the logo
2. A smaller picture field showing the logo
3. A formula field that calculates if the page number equals 1
4. A formula field that calculates if the page number does not equal 1
Link the big picture to field 3 and the smaller picture to field 4.
There are many other scenarios, but both the Link To functionality and the Relate To functionality are useful.
Kind regards,
Adrian

Country name and code in Form

Similar Messages

Maybe you are looking for