Country name in address (note 40467)

Hi
I would need to customize the set up for country name print in all forms. The name of a country is now printed in short style (eg DE-12345) and it does not help to use the advise given in SAP note 40467 to run report RS005ADR to set the indicator "Print country description" T005-XADDR.
What could be wrong and how could we print the address the way below for foreign letters:
Name
Street
Postcode City
Country
Br
F

Hello,
The FM uses postal regulations for printing the country. So it won't print the country if the from and to countries are the same.
i.e. if the address is in Canada and the send from is Canada, don't bother printing the country.
The EU has it's own little quirk of printing the country as a single character before the postal code when mailing another EU country.
i.e. Sending from Germany to France you'll see F-##### instead of France
Oh, and the country is in the language of the sending country unless you set it otherwise (If I'm sending from Canada to China, Canada Post needs to be able to read CHINA to know what international bin to toss it into).
VD03 doesn't know the sender country so it always shows the country.
Thank you,
Michael

Similar Messages

Country name in Chinese not displaying in PDF

Hi Experts
I am working on a Chinese localisation DB and when I export any docs to PDF the country name disappears. Print preview is fine . I have checked the forum and found the following link Chinese Characters not display when PDF for marketing doc which was helpful but unable to resolve the issue even after using different Chinese recognisable font. Just like to know how to get around this ?
Has any one comeup with this kind of issue ? Any help will be appreciated.
regards
Johnson

Hi All,
The issue has been fixed. There is a SAP note 1406074 as per the sap note,
Exporting Chinese/Japanese character correctly, involves a setting of the layout in SAP Business One.
1. Open the document layout.
2. Go to Print Layout Designer > Display Document Properties > Format tab;
3. Tick the "E-Mail Layout" checkbox, and choose a Chinese / Japanese font (E.g. MS Mincho)
4. Save the layout and set as default.
5. Export to PDF.
I had always changed the format to Chinese but never ticked the ' E-mail Layout box' This is just for information & thanks to Gordon and Rakesh for the inputs.
regards
Johnson

Can I batch-change country names in Address Book?

I want to change all my country names to CAPITALS in Address Book. Is there a way to do this using a batch-change or batch-edit of some kind? (I have thousands of entries that I want to change.)
Many thanks in advance for any help offered.

No, sorry, there is no such feature in Address Book. Perhaps a third-party contact application would have that feature.
Regards.

Country Name exists or not in Jquery!!

Hi All,
I want to validate country filed in Jquery, when the users clicks the filed if that country does not exists in database then the validation should throw error.
Below is the script i had wriiten when the submit button is pressed. Now how to handle those error messages in the below script.
function validateCTRY(){
                var data=$.data(P1_ENG_CTRY);
                if (data.autocomplete.selectedItem)
                                if(data.autocomplete.selectedItem==undefined)
                                                invalidModel = true; //error scenario
                                else
                                                $(P1_ENG_CTRY).css("background-color","#FFFFFF"); //success scenario
                else
                                invalidModel = true; //error scenario
}Thanks,
Anoo..
Edited by: Anoo on Sep 28, 2012 12:22 AM
Edited by: Anoo on Sep 28, 2012 3:59 AM
Edited by: Anoo on Sep 28, 2012 6:00 AM
Edited by: Anoo on Sep 28, 2012 6:09 AM
Edited by: Anoo on Sep 28, 2012 6:10 AM

Hi Alistair,
At last i could able to figure it out and could able to run the same.. But i had another problem the thing is i had nearly 9 autogen items where i had hadnled the funcation as mention below..Asumming i had enter only first two fileds and rest are empty but it is triggring for all the rest of items.
How we can handle this scenerio...Any help on this below code..
var validPlattsPopupLead=true;
function validatePlattsPopupLead()
     $("#P3_ENG_PART1").add("#P3_ENG_PART2").add("#P3_ENG_PART3").add("#P3_ENG_PART4").add("#P3_ENG_PART5").
     add("#P3_ENG_PART6").add("#P3_ENG_PART7").add("#P3_ENG_PART8").add("#P3_ENG_PART9").each(function()
          var data=$.data(this); //this -> should be the object or Text box element
          if (data.autocomplete.selectedItem)
               if(data.autocomplete.selectedItem==undefined)
                    validPlattsPopupLead = false; //error scenario
                    $(this).css("background-color","#FF0000");
                    alert("Value selected is not present autocomplete!!!");
               else
                    $(this).css("background-color","#FFFFFF"); //success scenario
                    alert("Value selected is present in autocomplete!!!");
                    validPlattsPopupLead = true;
          else
                          validPlattsPopupLead = false; //error scenario
               $(this).css("background-color","#FF0000");
               alert("Two Value selected is not present autocomplete!!!");
     return validPlattsPopupLead;
}Thanks,
Anoo..

Since upgrading to Firefox 6, I can't use my autofill forms. It now has my name and address but doesn't have credit card or password information that it had before and I don't know how to input it or import it from former versions of Firefox.

I just upgraded to Firefox 5. Before when I filled in a form, I just had to click autofill and all my information was provided. I found autofill on customize toolbars and added it, but it only had my name and address, not my credit cards or passwords. Before I could click on them and change them if I needed to. I would like to input them on this version or import them from the last one so I can easily fill forms online, but I can't see how to do it.

See https://support.mozilla.com/en-US/questions/822354#answer-185784

Receivables - ARDLP Report Not Printing Country Name

AR Report ARDLP for concurrent program Dunning Letter Generate is not printing Country Name on send to and remit to part of the letter. Though the package 'arp_addr_label_pkg.format_address' is giving the output with the country name(when I ran the package in SQL Developer) but when I run the report it is not giving the country name. What could be the reason?
Thanks,
Sravanthi

Thankyou very much Nagamohan. It is printing the country now on the dunning letters. I think it was because of settings in system options though the default country was set, print home country was unchecked. When I reran the process it printed the country.
The Statement print program also had the same issue. Now after the changing the system options, it is printing the country in the send to address but not in the remit to address if the countries are same for both send to and remit to. If they are different it is printing in both the places. Eg. If it is United Kingdom in both send to and remit to, its printing only in send to. If its united states in send to and united kingdom in remit to then its printing in the remit to area. Any idea on this?
Thanks,
Sravanthi

How to get the country name from IP address?

Hello All,
I am able get the IP address of the visitors by using
String ipAddress = request.getRemoteAddr(); .
I'm also getting the host name by using
InetAddress iaddress = InetAddress.getByName( ipAddress );
String ipaddr = iaddress.getHostName();
But... I'm not able to find the Country's name from which that IP is coming from.
Is there any class in JAVA that will help me find the respective country's name??
Thank u!!!

There is no magic way to tell country from IP address. You can guesstimate the country using a IP-to-country mapping database, with some accuracy.
I use the free version of the GeoIP (google for it) database; it is a file that you download, and they have a Java API or you can roll your own. They also have better quality databases for a fee, and apparently a web service. I prefer a file because it's faster and more reliable to check against a memory data structure than to make a long distance TCP/IP call. The web service isn't magic either; it is just an interface to the same database, and it doesn't give 100% accuracy, nothing will. If you use the file you may want to make it a monthly to-do item to download the latest version. There are other similar databases around too; google for "geolocation".

Country name not printing for EU countries

Hello,
I am using the SAPscript Z_9H_RVORDER02 for printing sales quotes. For EU countries, I notice that the country name is not getting printed in the address.
In the customization OY01, I even checked the checkbox 'Print Country Name', still it does not print the country name. Is there any other setting that I need to make in order to get the country name in the address for EU countries.
Thanks,
Rugmani

Dear Rugmani,
I think this is related to output program issue so,
Please take help of ABAPer and ask him to debug the program, chek how the country field is capturing in the output.
There is a Function Module to capture the address please check that also.
I hope it will help you,
Regards,
Murali.

FI Correspondence Print Country Name in all Addresses

Hi Experts,
I am using form script to print payment advice as correspondence and below is script (SAP standard) I am using in element "Address". My client has the requirement that even if the vendor is local (of same country) then also in the address data COUNTRY NAME should be printed.
I understand there is some conceptual logic due to which for local country addresses country name is not printed.
Any way through which we can print country name even for the local vendors?
/:   ADDRESS PARAGRAPH AS
/:   TITLE       &REGUH-ZANRE&
/    :NAME        &REGUH-ZNME1&, &REGUH-ZNME2&, &REGUH-ZNME3&, &REGUH-ZNME4&
/:   STREET      &REGUH-ZSTRA&
/:   POBOX       &REGUH-ZPFAC& CODE &REGUH-ZPST2& CITY &REGUH-ZPFOR&
/:   POSTCODE    &REGUH-ZPSTL&
/:   CITY        &REGUH-ZORT1&, &REGUH-ZORT2&
/:   REGION      &REGUH-ZREGI&
/:   COUNTRY     &REGUH-ZLAND&
/*   FROMCOUNTRY &T001-LAND1&
/* Inserted,see Sap Note 167440
/:   ADDRESSNUMBER &REGUH-ZADNR&
/: ENDADDRESS
Thanks and Regards,
Prashant Rane

Hi Michael,
Thank you for your reply.
Could you advise yow to change this to see the Country Name and Code in Print form
Thanks & Regards,
Venkataraju

My country name is not listed

MMy country name is not available to make Apple ID.my country name is Bangladesh.what I will do

Until if/when Apple open an iTunes store in Bangladesh then unfortunately you won't be able to download any iTunes content - you need to be in a country (and have a billing address in that country on your account) to be able to use a country's store, so you won't be able to use another country's store

Country name is not printing F110

Hi All,
The country name is not printing on the check when using transaction F110 for one vendor. I checked the vendor master and country is there. I do not have any idea about transaction. Please help me find out what is causing the error.
Thanks,
Veni.

Check printing SAPScript uses the Address ... Endaddress command of the SAPScript.
In this command, if you provide the sender country as fixed value than, it will not print the country for the vendor in the same country.
/: FROMCOUNTRY sender country
Check this help:
http://help.sap.com/saphelp_40b/helpdata/en/d1/803238454211d189710000e8322d00/content.htm
Regards,
Naimesh Patel

Country name formatted incorrectly in addresses

When entering information for a new contact, or even when revising for an existing one, if the address is listed, with United States as the country, upon saving the contact, it sometimes merges the first & last word together, so the country reads as "UnitedStates", and if you go back into to edit the country name & choose "United States", sometimes it will save with the space between the two, and sometimes it will still merge the two together. The problem is when you click on the link for the address to find it on maps, the first thing you see is "Did you mean United States?", if the two are merged. A minor bug that needs to be resolved for accuracy.
Incorrect
Correct

Footrot wrote:
While logged on, Apple seems indifferent to advice that some countries are missing from their countries lists. Supplier like this a a no-no for future purchases.
Somehow I doubt that will be a big concern for them - which are these all important countries that will make people not buy the iPhone ? I know from previous posts that Afghanistan is one that is missing from the list, but lets be realistic, people are not going to refuse to buy an iPhone because Afghanistan isn't on a list.

HT201318 I registered my apple ID and Icloud with a US address, and live in Switzerland. I do not own a US credit card. Now that I need to buy more storage with my swiss credit card, I can't change the country's billing address from the US to my swiss one

I registered my apple ID and Icloud with a US address, and live in Switzerland. I do not own a US credit card. Now that I need to buy more storage with my swiss credit card, I can't change the country's billing address from the US to my swiss one. HELP PLS?

Did you actually watch the movie? You get 30 days in which to view it and if you didn't watch it, that could be why you are getting that message. If you have watched the movie and you're sure that is has expired by now, contact iTunes Store Support and seek their help.
Change the country in the upper left. - and click on Purchases, billing and redemption to proceed.
https://getsupport.apple.com/Issues.action

Name and Address operator's packge do not have any values

Hi All,
I am using the Name and Address operator, but I do not have/want the 3rd party vendor's connector/tool/data library to work with my OWB.
I developed the map and deployed that map into my target.
Package got generated of name NAME_ADDRESS
In this package the entry point is the MAIN function, in the main function taking one parameter p_env.
When I execute the Package from SQL*Plus I am getting the value of p_env, which is wrong, p_env can not be NULL/0 at any case.
All I want is, how to pass/populate the value into p_env parameter, there will be more than one value into that parameter, param_value varchar2(30)and param_name varchar2(4000).
But I know nothing about what are the values may be in , when I execute the package...
ALSO I AM ATTACHING SOME MORE DETAILS....
create or replace package
FUNCTION Main(p_env IN WB_RT_MAPAUDIT.WB_RT_NAME_VALUES) RETURN NUMBER IS
end package
In this main function, the p_env is getting Initialize, it calls the initialize
procedure, there directly getting count on this parameter.
my question is at what point of time these valiables get initialize and what
are the exact details for the followings
TYPE WB_RT_NAME_VALUE IS RECORD
param_name varchar2(30),
param_value varchar2(4000)
TYPE WB_RT_NAME_VALUES IS TABLE OF
WB_RT_NAME_VALUE
INDEX BY BINARY_INTEGER;
What are these two variables (param_name and param_value) implies in wb_rt_mapaudit package
ANY HELP GREATLY APPRECIATED
THANKS FOR YOUR TIME
Gladson
[email protected]

Gladson,
Page 8-73 of the Warehouse Builder user's guide explicitly highlights the following section:
Note: Taking advantage of the Name and Address operator requires separate licensing and additional installation steps. Refer to the Oracle9i Warehouse Builder Installation and Configuration Guide for more information.
The functionality that does the parsing and standardization is not part of Warehouse Builder, but part of the package that the software partner brings in. If you think about that, it actually makes sense. Would you expect Warehouse Builder to contain the code to perform this action for all countries across the globe, in all different languages and the like? The data vendors, who are the experts in the different areas, know this information.
So, if all you want to do, is parse and standardize an address, then yes, you may be better of going directly to a partner (having said that, you may get a discount if you are a Warehouse Builder customer, but that I do not know for sure).
However, what does Warehouse Builder add:
- Data object design (maybe your target tables don't exist) and deployment
- ETL design and code generation
- Process flow creation and deployment
- Execution management (automatic logging etc)
- Integration with Discoverer
- Metadata management, such as impact analysis, version management, multi language support...
- Much, much more.
Specific to name and address (or say data quality): if you include the name and address operator on a Warehouse Builder mapping, then you can plug in any partner library you want, and in case you find out that another partner delivers better results, then go with the other partner. At the end of the day, you abstracted the implementation from the design. That makes you much more flexible in your choice of a data vendor. Besides, you get impact analysis, lineage and lots of other metadata management features for free. On top of that, if you want to identify duplicates, perform householding and the like, then there is match and merge (which yes, is part of the tool and not a third-party implementation) in order to define the rules for matching and merging.
Again, if you don't need any of that, then perhaps you don't want the overhead of having all this and you go directly to a data vendor.
Hope this helps,
Mark.

Ship to Party address is missing country name in SAPScript FORM

Hi All,
i had modified the form for displaying the address of the Ship - to - party address, but the country name is missing in the FORM output, can any body suggest a solution for this..
here is the code that i had written...
FORM get_addr TABLES intab TYPE t_intab
              out_tab TYPE t_outtab.
DATA : wa_intab LIKE itcsy,
         w_outtab LIKE itcsy.
DATA v_adrnr_we TYPE adrc-addrnumber.
READ TABLE intab INTO wa_intab INDEX 1.
v_adrnr_we = wa_intab-value.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
      input = v_adrnr_we
    IMPORTING
      output = v_adrnr_we.
SELECT SINGLE * FROM adrc WHERE addrnumber = v_adrnr_we.
READ TABLE out_tab INTO w_outtab WITH KEY name = 'Z_NAME1'.
IF sy-subrc EQ 0.
    w_outtab-value = adrc-name1.
    MODIFY out_tab FROM w_outtab INDEX sy-tabix.
ENDIF.
READ TABLE out_tab INTO w_outtab WITH KEY name = 'Z_NAME2'.
IF sy-subrc EQ 0.
    w_outtab-value = adrc-name2.
    MODIFY out_tab FROM w_outtab INDEX sy-tabix.
ENDIF.
READ TABLE out_tab INTO w_outtab WITH KEY name = 'Z_NAME3'.
IF sy-subrc EQ 0.
    w_outtab-value = adrc-name3.
    MODIFY out_tab FROM w_outtab INDEX sy-tabix.
ENDIF.
READ TABLE out_tab INTO w_outtab WITH KEY name = 'Z_NAME4'.
IF sy-subrc EQ 0.
    w_outtab-value = adrc-name4.
    MODIFY out_tab FROM w_outtab INDEX sy-tabix.
ENDIF.
READ TABLE out_tab INTO w_outtab WITH KEY name = 'Z_STREET'.
IF sy-subrc EQ 0.
    w_outtab-value = adrc-street.
    MODIFY out_tab FROM w_outtab INDEX sy-tabix.
ENDIF.
READ TABLE out_tab INTO w_outtab WITH KEY name = 'Z_CITY1'.
IF sy-subrc EQ 0.
    w_outtab-value = adrc-city1.
    MODIFY out_tab FROM w_outtab INDEX sy-tabix.
ENDIF.
READ TABLE out_tab INTO w_outtab WITH KEY name = 'Z_CITY2'.
IF sy-subrc EQ 0.
    w_outtab-value = adrc-city2.
    MODIFY out_tab FROM w_outtab INDEX sy-tabix.
ENDIF.
CLEAR adrc.
ENDFORM.                    "GET_ADDR
and in the form editor it was like this.....
PERFORM GET_NAME IN PROGRAM ZSD_SDPACKLI
USING &VBPLA-ADRNR_WE&
CHANGING &Z_NAME1&
CHANGING &Z_NAME2&
CHANGING &Z_NAME3&
CHANGING &Z_NAME4&
CHANGING &Z_STREET&
CHANGING &Z_CITY1&
CHANGING &Z_CITY2&
ENDPERFORM
ADDRESS DELIVERY PARAGRAPH AS\
NAME     &Z_NAME1&, &Z_NAME2&, &Z_NAME3&, &Z_NAME4&
STREET   &Z_STREET&
CITY     &Z_CITY1&, &Z_CITY2&
POSTCODE &VBPLA-PSTLZ_WE&
COUNTRY &VBPLA-LAND1_WE&
REGION   &VBPLA-REGIO_WE&
FROMCOUNTRY &VBPLA-LAND1_VST&
ENDADDRESS
Thanks in advance..!

Hi Abaper,
In ADRC table,you will have a field by name COUNTRY.This holds the country key.
Using this country key LAND1 in ADRC table,you will have to fetch the Country name from T005T table.The field in the T005T which holds the Country name is LANDX.
You will have to write select querries for this.
By using LANDX from T005T table ,you can display the country name.
Regards,
Kashyap Ivaturi

Country name in address (note 40467)

Similar Messages

Maybe you are looking for