Country of Departure Blank - Customs Decl. Line Item

Hi -
I have several customs declaration documents where the line items themselves are missing the country of departure value. Looking in our development environment I am seeing that 90% of our documents have country of departures listed at the line item level while the remaining 10% do not.
I am failing to see why some would contain this information and some would not. We stumbled across this when we were reviewing a custom report that used that field to make other data determinations.
Has anyone else seen this?
Thanks,
Rachael

Hi Dave -
Thanks for the heads up on checking the feeder system . I was able to see that the foreign trade data is maintained at the item level and at least, at a minimum, the country of origin is being stored correctly on customs export declaration at the line item level. The departure / destination countries are still only being stored at the header level of the customs declaration.
We did get a response from SAP on this and apparently this was a change that was made between GTS 8 and 10. We just upgraded on Feb 16 and my colleague was able to determine that anything after this point in time no longer stored departure countries at the item level. In addition, we recently migrated from country-specific numbering schemes for the US, MX to country independent.
So at this point I think my question was answered, the departure / destination countries will only be stored at the header from this point forward.
Thanks for the response!
Rachael

Similar Messages

NEW GL: Customer/Vendor Line items cannot be displayed per business area

Hello ECC 6.0 Masters!
We have implemented Standard Document Splitting by Business area(BUSA). See below scenario..
ENTRY VIEW
PK     Account          Segment          Amount
01     Customer               100
50     Expense          BUSA1          60-
50     Expense          BUSA2          40-
GL VIEW
PK     Account               Segment          Amount
01     CustomerReconAcct     BUSA1          60
01     CustomerReconAcct     BUSA1          40
50     Expense               BUSA1          60-
50     Expense               BUSA2          40-
However after implementation we discovered that because the Customer/Vendor BUSA is blank in entry view, we now cannot derive reports that are normally based on the BUSA of Customer/Vendor line item, which we used to be able to do prior to implementing NEW GL.
Some of them are below:
1. Debtor Ageing Analysis (Standard)
2. Customer/Vendor line items per BUSA (Standard)
3. Several other Sublegder based custom reports we have that neeed to be categorized by BUSA
My question now is..Is there a way to derive these Business Area information under Vendor and Customer account to produce our reports? Especially for the Ageing which is key to the business process of my client.
I hope somebody there has experienced this before. thanks!
Andrew

Hi
You will not get ageing reports based on BA after new gl migration. You need to bring the info from the new gl tables. one of the easiest ways is to get the info from the table FAGL_SPLINFO by passign BSEG-BELNR. For defining ageing reports in new gl use t code FKI3 and FDI3 for Vendors and Customers respectively.
Regards
Sanil Bhandari

FI Archiving - System error: Customer/vendor line item not on OI basis

While archiving FI Documetns using object FI_Documnt, I am getting message System error: Customer/vendor line item not on OI basis for few non archivable documents. Is it like these also open items and can not be able to archive them. Or what is the root cause of these error message.
Regards,
Shailesh

Hi Adisha,
This error pertains to the accounting fundamentals and SAP does not have anything to do with this....you ask yourself that if you were not using SAP and simlar problem came your way what would you have done...this has no solution...
Either you wait for the next invoice with big amount but which seems bit impractical..
In this we really need to consult the Accounting Standards to see what it could allow.
Regards,
Chintan Joshi

Withholding tax amount exceeds the customer/vendor line item amount 001

Hi Guys,
I am trying to release an invoice using VF02 transaction but I recieved the below error message:
Message no. 7Q321
Withholding tax amount exceeds the customer/vendor line item amount 001
There are 2 SAP (718078 and 513201) notes regarding that but they are not applicable in ECC 6.0.
How can I figure out this issue?
Thanks,
Daniel Dorta

Hi,
This may happen because you have give base exemption and after that charge tax. In this case you have posted earlier invoice w/o wht and now you are posting the small amount of invoice on which wht is calculated including the earlier exempt amt. In this case the wht exceeds the base amt.
In this case if possible you first post the invoice with sufficient amount which can deduct the WHT .
If your scenario is different give details.
Regards
Milind Sonalkar

Withholding tax amount exceeds the customer/vendor line item amount

Hi experts
I am having one problem please help me
My user created one down payment, entry is like this
Vendor Dr-193914
To TDS 3878
To Bank 190036
After this he has booked MIRO with the same value 193914 & has deducted TDS 3878 over that invoice
Now when he is going to adjjust that down payment against that MIRO with specific line item 62
system is throwing that error.
Withholding tax amount exceeds the customer/vendor line item amount 002
Message no. 7Q321
I checked invoice booked correctly & TDS also dedcuted properly why system is throwing that error message
please help me
Regards
Nitin Shukla

Hi Madhu
thanks a lot for instant reply
We are using F-54 Down Payment adjustment at this time we are facing problem & we are clearing against invoice
& with specific line item
For Eg. 5100001596 & line item - 53
Regards
Nitin Shukla

Wht tax amount exceeds the customer/vendor line item amount 001Mess no7Q321

Dear Experts,
We are also getting same error in production"Withholding tax amount exceeds the customer/vendor line item amount 001 Message no. 7Q321"
Please gudie me how to resolve this issue, while posting vendor invoice in T-code - F-43 i am getting bellow error message why because we client requirement is accumulation activity required so is there any solution for this with out changing accumulation activity.
We need to use this accumulation activity.
I would be greatful if you could help us to resolve this issue.
thanks
Seshu

If its relating to TRM- Transaction manager, please implement note no " 1961340 - Calculation of withholding tax for 2nd or 3rd local currency "
Regards
Anil

Function Module for clearing customer open line items?

Hi,
Can anyone suggest me, the FM for clearing the customer open line items/
Manually we can do by f-32.....but, i need an FM for this?
Thanks in Advance,
Manju.

Hi. I just found a good way of doing this from a program. It sort of uses BDC but in such a way that you don't get all the problems you normally get with BDC.
First create a custom program with an internal table called YBSID of type BSID, and select into it from BSID the items you want to clear, 1 customer at a time. You must call your internal table YBSID.
Then you need to populate a BDC table with very basic data, the easiest way to do it is to set a break-point in form "CALL_TRANSACTION" of include F124_MERGE, then run F.13, it will break at this point and you can copy the contents of BDCDTAB.
Then in your custom program put the same statement as the include "EXPORT YBSID TO MEMORY ID '%F124%'." then call transaction 'FB1D' using the BDC table.
What this does is clear exactly whatever data you put in YBSID. It uses the transaction FB1D but all the clearing data is already populated from YBSID. If you call a transaction normally it is very hard to select the right items to clear, using YBSID you only enter 1 screen and do not have to select anything.
You can also use this same method to clear vendor line items using YBSIK and transaction FB1K and G/L line items using YBSIS and FB1S.
I hope this helps.
Regards,
Dave.

Need Profit Centre,WBS element fields in Customer/Vendor Line item display

Dear Experts,
In Standard SAP we do not have the Profit Center, WBS Element in Customer / Vendor line item functionality. Now we need to develop user exit, when User try to post transactions like MIRO, F-02, FB01 system should ask the Profit Center field and WBS Element field in Vendor / Customer line items.
I dont know the actual functionality, The consultant has given example as 3 transactions, Do we need to update any other transactions also. If yes please provide me the information.
Can anyone help me with the solution.
Thanks in advance.
Regards,
Abdur Rafique

I have used User exit, to obtain the above scenario.

How can i clear the vendor and customer open line items at a time same vendor as a customer of the company (same vendor same customer and equal invoices )

my vendor and customer are same . purchase invoice due100000 and sales invoice amount is also 100000 at a time with any manual action , have any setting for cleared both vendor and customer line items at a time ...........

X Ltd. will be Vendor & Customer.
Purchase Invoice is booked under Vendor SAP number & Sales Invoice is booked under Customer SAP number. Then you can transfer amount from Vendor to Customer or vice versa with T-code F-04.
Then if you have transferred amount from customer to Vendor (F-04), Vendor account will have two entries Debit & Credit. Then go for clearance with T-code F-44 clear Vendor.

Can we see Customer # in line item of accoutning doc for Rebate Correction

Hi SD gurus,
Now we have a requirement about rebate correction. In correction step, business want to see the customer number in line item of accounting document since it will be easy for them to do the reconciliation. I know there are allocation # and reference # in copying control that can be used to transfer some information from billing to accounting doc, but there is no option for customer # filed. All the information it can transferred is like SO #, Delivery # etc. Is that because cusotmer # is master data? Can anybody give me some idea?
Your advise will be highly appreciated.
DL
Edited by: Dreamlife on Apr 6, 2010 8:08 PM

HI.
YES it is passible.
If the GL is activated line item display check box is active then we can able to see the data as per line items.
T<Code. Fbl5n
Thanks.
Vasu
Edited by: Vasu Enaguthi on Apr 7, 2010 8:46 AM

Transfer of Customer Open Line Item to other Company Code.

Hi Experts,
I have a scenario where my client want to tranfer the Customer Line item(open item) to other company code? How can i do that?
i.e : My client are having two company codes 1000 and 2000. they are having same customer in both company code, now they want to transfer customer line item from company code 1000 to company code 2000. Please tell me how can i do that without using cross company code transaction. because my client dont want to use cross company code transaction here....please suggest alternate way to do that?
Regards,
Sam.

Hi
you can use the system make the transfer posting with or without clearing.
To do so, choose Document entry-> Other -> Intern.transf.psting -> With clearing or Without clearing from the Accounts
Receivable menu:
From the Accounts Receivable screen, select Document entry and then the accounting transaction.
Enter and post the document as usual.
Please check by testing.
Reg
Suresh

Customer /Vendor line item..

Hi..
One query..for line item display of GL account we select in GL master "line item display"
but for customer and vendor line item display in FBL1N & FBL5N...from where we tick the line item dispaly .
Please reply

Dear expert
For each vendor account, the system notes which line items have been posted to the account. You can specify the sort sequence of the line items by entering a key in the Sort key field within the account master record. This key specifies how the Allocation field is to be filled in the line items posted to the vendor account. When you call up the line item display, the system sorts the line items according to the contents of the field. You can change the sort sequence in the line item display.
Please refer below link
http://help.sap.com/saphelp_40b/helpdata/en/01/a9b6aa455711d182b40000e829fbfe/content.htm
Regards
Ajeesh.s

Customer Account line items are Missing Fbl5N

Hi experts...
FI Guys could not able to find customer account open line items in FBL5n after generating Accounting document automatically and we have checked VKOA screen, Assignments are fine but in that accounting document the customer itself is missing in the entry where as other line items like revenues, taxes are visible. Where could have been the mistake?
Kindly help with the possibilities of missing configuration
Warm Regards
Vijay

Hi,
Pls check Customer GL Reconciliation account - Line Item display field. We have to enable it to display linenitems in report.
regards
DSR

Customer statement line item sorting

Hello SAP Gurus,
We use a customer statement which has SAP delivered program and 'z'type form, but our requirement is to sort the line items inside the statement.
I tried using o7s6 - Line item Corresponding sort variant (SPRO>F/A>F/A Global Settings-->Correspondence)in that how would I create a sorting variant that will sort line items based on due date.
And also I believe some configuration need to be done in variant for program i.e., SE38--> give the program name and execute (F8) --> in side this there are options to sorting by due date but I was not able to achieve what I want.
Can anyone please help me with this.
Thanks
Kishore
Message was edited by:
kishore

Hello
follow the link and you could get more info
http://help.sap.com/saphelp_erp2005vp/helpdata/en/01/a9c1cb455711d182b40000e829fbfe/frameset.htm
Editing Line Items
You can edit line items for a payment or an exception list at a second list level. You can use the following functions to help you edit line items:
Sort
Search
Change line layout
To edit line items of a payment, double-click the desired payment line.
The system then displays the open items of this payment on another screen.
Sorting Line Items
To sort open items, choose Edit ® Sort. This brings up an additional window where you can sort the line items according to four criteria and define a sequence (see "Sorting Payments" in Editing Payments).
Searching for Line Items
To search for particular open items, choose Edit ® Find. Select a search criterion and enter the desired values or value ranges (see "Searching for Payments" in Editing Payments).
Changing the Line Layout
To change the line layout, choose Settings ® Line Layout, and select the required line layout variant. There are four variants delivered with the standard system.
The standard setting for the sort, find, change line layout, and display totals functions depends on your system configuration. You can change it in Customizing.

In which table could i find customer open line items

I can see open line items in FBL5n, i need a table where i can get these entreis. i know these entries will defintely be there in BSEG, but i need some other table where i can find entries only for customers.
please suggest.

Hi
Customer Open item
BSID - for customer open item
BSAD - For Customer Cleared item
If any query revert back
Regards
Roobal

Country of Departure Blank - Customs Decl. Line Item

Similar Messages

Maybe you are looking for