Country of Origin US - Printing Error

Hi SAP GURU's
IN OY01 Define countries has a feild named address layout key for EU european countries its 001
While printing the SMARTFORM the prints F-1112 for country france.
I know the address layout key can be changed , but this is not a valid solution as this might cause other transaction issues.
Whats is the best possible way to tackle this
Also SAP uses standard ISO codes to print EU countries Address which is F-1111
Howerver the Help F1 in the address key layout says if the Display country foreign indicator is ticked then the country will be displayed in the Address...However this also not hapenning
Thanks in Advance.

What is the use of the feild " Display country name"
Edited by: SAP Consultant on Jul 14, 2010 9:09 PM

Similar Messages

  • Country of origin is not printing in Export Commercial Invoice for US

    Dear Abapers,
    I am using the standard form to print  export commercial invoice. I am using the output type   FUCI.  In that country of Origin and country of final destination is not printing in the form. The structure V55ENAFT has the field URSPR_HEADER for Country of origin and  BESTI for Country of destination.  What I have to do get populate the values for those fields.
    Thanks & regards,
    Jagadeesh T.

    hi,
    You may try creating /updating equipment data without entering the country of origin. Since this field in asset master might have been disabled, system will not allow to save data.
    James Prabaharan

  • Canon IR-Adv 5045 printing error 'Filter' failed

    I just upgrade our office to include 7 new Mac Pro towers and one iMac. All of the towers had no problems when upgrading the print drivers for our Canon printer.  The iMac (only) returns a print error and will not print to the device. If anyone can read the error code in the consule and direct me how to fix the error I would greatly appreciate it.
    Here is the concole error:
    It first states: mdworker: Unable to talk to lsboxd
    mdworker(443) deny mach-lookup com.apple.ls.boxd
    Process:         mdworker [443]
    Path:            /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.framework /Versions/A/Support/mdworker
    Load Address:    0x101f91000
    Identifier:      mdworker
    Version:         ??? (???)
    Code Type:       x86_64 (Native)
    Parent Process:  launchd [202]
    Date/Time:       2013-01-29 10:47:56.599 -0500
    OS Version:      Mac OS X 10.8.2 (12C2037)
    Report Version:  8
    Thread 0:
    0   libsystem_kernel.dylib                  0x00007fff92443686 mach_msg_trap + 10
    1   CoreFoundation                          0x00007fff967a7803 __CFRunLoopServiceMachPort + 195
    2   CoreFoundation                          0x00007fff967acee6 __CFRunLoopRun + 1078
    3   CoreFoundation                          0x00007fff967ac6b2 CFRunLoopRunSpecific + 290
    4   CoreFoundation                          0x00007fff967bb371 CFRunLoopRun + 97
    5   mdworker                                0x0000000101f99ba9
    6   libdyld.dylib                           0x00007fff94afc7e1 start + 0
    Thread 1:
    0   libsystem_kernel.dylib                  0x00007fff92445d16 kevent + 10
    1   libdispatch.dylib                       0x00007fff92a549ee _dispatch_mgr_thread + 54
    Thread 2:
    0   libsystem_kernel.dylib                  0x00007fff92443686 mach_msg_trap + 10
    1   liblaunch.dylib                         0x00007fff930ba7c4
    2   liblaunch.dylib                         0x00007fff930b94d9 bootstrap_look_up3 + 69
    3   libxpc.dylib                            0x00007fff95652c21 _xpc_connection_bootstrap_look_up_slow + 371
    4   libxpc.dylib                            0x00007fff95651c82 _xpc_connection_init + 1062
    5   libdispatch.dylib                       0x00007fff92a520b6 _dispatch_client_callout + 8
    6   libdispatch.dylib                       0x00007fff92a5347f _dispatch_queue_drain + 235
    7   libdispatch.dylib                       0x00007fff92a532f1 _dispatch_queue_invoke + 52
    8   libdispatch.dylib                       0x00007fff92a53448 _dispatch_queue_drain + 180
    9   libdispatch.dylib                       0x00007fff92a532f1 _dispatch_queue_invoke + 52
    10  libdispatch.dylib                       0x00007fff92a531c3 _dispatch_worker_thread2 + 249
    11  libsystem_c.dylib                       0x00007fff946b7cab _pthread_wqthread + 404
    12  libsystem_c.dylib                       0x00007fff946a2171 start_wqthread + 13
    Thread 3:
    0   libsystem_kernel.dylib                  0x00007fff924436c2 semaphore_wait_trap + 10
    1   libxpc.dylib                            0x00007fff95654e1f xpc_connection_send_message_with_reply_sync + 127
    2   LaunchServices                          0x00007fff94fcf3ce send(LSBoxMessage&, LSBoxMessage&) + 28
    3   LaunchServices                          0x00007fff9504fd4b lsbox_preflightAppLaunch + 84
    4   LaunchServices                          0x00007fff94fda341 _LSFindOrRegisterBundleNode + 857
    5   LaunchServices                          0x00007fff95036b02 _LSRegisterNode + 75
    6   LaunchServices                          0x00007fff94fe2a0f _LSBundleCopyOrCheckNode + 1047
    7   LaunchServices                          0x00007fff94fca5b6 _LSCopyLibraryItemURLs + 486
    8   mdworker                                0x0000000101fc1014
    9   libdispatch.dylib                       0x00007fff92a55f01 _dispatch_call_block_and_release + 15
    10  libdispatch.dylib                       0x00007fff92a520b6 _dispatch_client_callout + 8
    11  libdispatch.dylib                       0x00007fff92a5347f _dispatch_queue_drain + 235
    12  libdispatch.dylib                       0x00007fff92a532f1 _dispatch_queue_invoke + 52
    13  libdispatch.dylib                       0x00007fff92a531c3 _dispatch_worker_thread2 + 249
    14  libsystem_c.dylib                       0x00007fff946b7cab _pthread_wqthread + 404
    15  libsystem_c.dylib                       0x00007fff946a2171 start_wqthread + 13
    Thread 4:
    0   libsystem_kernel.dylib                  0x00007fff924456d6 __workq_kernreturn + 10
    1   libsystem_c.dylib                       0x00007fff946b7cb3 _pthread_wqthread + 412
    2   libsystem_c.dylib                       0x00007fff946a2171 start_wqthread + 13
    Thread 5:
    Binary Images:
           0x101f91000 -        0x101feaff7  mdworker (707.3) <16ABDF29-6F80-3D48-8518-2650891685C3> /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.framework /Versions/A/Support/mdworker
        0x7fff92433000 -     0x7fff9244eff7  libsystem_kernel.dylib (2050.20.9) <EC0A9F5B-C9F5-336B-A7DD-49A718042F39> /usr/lib/system/libsystem_kernel.dylib
        0x7fff92a50000 -     0x7fff92a65ff7  libdispatch.dylib (228.23) <D26996BF-FC57-39EB-8829-F63585561E09> /usr/lib/system/libdispatch.dylib
        0x7fff930b7000 -     0x7fff930bffff  liblaunch.dylib (442.26.2) <2F71CAF8-6524-329E-AC56-C506658B4C0C> /usr/lib/system/liblaunch.dylib
        0x7fff946a1000 -     0x7fff9476dfe7  libsystem_c.dylib (825.25) <3B1FE674-F556-3B3F-922A-FEEF222576D8> /usr/lib/system/libsystem_c.dylib
        0x7fff94afa000 -     0x7fff94afdff7  libdyld.dylib (210.2.3) <F59367C9-C110-382B-A695-9035A6DD387E> /usr/lib/system/libdyld.dylib
        0x7fff94fc6000 -     0x7fff95077fff  com.apple.LaunchServices (539.7 - 539.7) <DA7C602E-5E01-31B8-925D-B45360CA089F> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchS ervices.framework/Versions/A/LaunchServices
        0x7fff95649000 -     0x7fff9566bff7  libxpc.dylib (140.41) <FAC04D8B-680E-325F-8F0C-DD69859D0E01> /usr/lib/system/libxpc.dylib
        0x7fff96778000 -     0x7fff96961fff  com.apple.CoreFoundation (6.8 - 744.12) <EF002794-DAEF-31C6-866C-E3E3AC387A9F> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation

    Here is the CUPS error log:
    E [29/Jan/2013:10:48:02 -0500] [Job 2] Job stopped due to filter errors; please consult the error_log file for details.
    D [29/Jan/2013:10:48:02 -0500] [Job 2] The following messages were recorded from 10:47:57 to 10:48:02
    D [29/Jan/2013:10:48:02 -0500] [Job 2] Adding start banner page "none".
    D [29/Jan/2013:10:48:02 -0500] [Job 2] Queued on "Canon_iR_ADV_C5000s_B1_PSV1_0US" by "brian".
    D [29/Jan/2013:10:48:02 -0500] [Job 2] File of type application/postscript queued by "brian".
    D [29/Jan/2013:10:48:02 -0500] [Job 2] Adding end banner page "none".
    D [29/Jan/2013:10:48:02 -0500] [Job 2] time-at-processing=1359474477
    D [29/Jan/2013:10:48:02 -0500] [Job 2] job-sheets=none,none
    D [29/Jan/2013:10:48:02 -0500] [Job 2] argv[0]="Canon_iR_ADV_C5000s_B1_PSV1_0US"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] argv[1]="2"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] argv[2]="brian"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] argv[3]="Option 1.pdf"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] argv[4]="1"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] argv[5]="AP_ColorMatchingMode=AP_ApplicationColorMatching AP_D_InputSlot= collate com.apple.print.DocumentTicket.PMSpoolFormat=application/pdf com.apple.print.JobInfo.PMJobName=Option\ 1.pdf com.apple.print.PrinterInfo.PMColorDeviceID..n.=37710 com.apple.print.PrintSettings.PMColorMatchingMode..n.=0 com.apple.print.PrintSettings.PMCopies..n.=1 com.apple.print.PrintSettings.PMCopyCollate..b. com.apple.print.PrintSettings.PMFirstPage..n.=1 com.apple.print.PrintSettings.PMLastPage..n.=2147483647 com.apple.print.PrintSettings.PMPageRange..a.0..n.=1 com.apple.print.PrintSettings.PMPageRange..a.1..n.=2147483647 media=Tabloid orientation-requested=4 pserrorhandler-requested=standard job-uuid=urn:uuid:eed84498-012e-3160-595d-d100c17e0632 job-originating-host-name=localhost time-at-creation=1359474477 time-at-processing=1359474477 PageSize=Tabloid"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] argv[6]="/private/var/spool/cups/d00002-001"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[0]="<CFProcessPath>"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[1]="CUPS_CACHEDIR=/private/var/spool/cups/cache"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[2]="CUPS_DATADIR=/usr/share/cups"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[3]="CUPS_DOCROOT=/usr/share/doc/cups"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[4]="CUPS_FONTPATH=/usr/share/cups/fonts"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[5]="CUPS_REQUESTROOT=/private/var/spool/cups"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[6]="CUPS_SERVERBIN=/usr/libexec/cups"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[7]="CUPS_SERVERROOT=/private/etc/cups"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[8]="CUPS_STATEDIR=/private/etc/cups"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[9]="HOME=/private/var/spool/cups/tmp"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[10]="PATH=/usr/libexec/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[11]="SERVER_ADMIN=root@localhost"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[12]="SOFTWARE=CUPS/1.6svn"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[13]="TMPDIR=/private/var/spool/cups/tmp"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[14]="USER=root"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[15]="CUPS_MAX_MESSAGE=2047"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[16]="CUPS_SERVER=/private/var/run/cupsd"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[17]="CUPS_ENCRYPTION=IfRequested"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[18]="IPP_PORT=631"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[19]="CHARSET=utf-8"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[20]="LANG=en_US.UTF-8"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[21]="APPLE_LANGUAGE=en-US"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[22]="PPD=/private/etc/cups/ppd/Canon_iR_ADV_C5000s_B1_PSV1_0US.ppd"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[23]="RIP_MAX_CACHE=128m"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[24]="CONTENT_TYPE=application/postscript"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[25]="DEVICE_URI=dnssd://Canon%20iR-ADV%20C5000s-B1%20PSV1.0US._printer._tc p.local./"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[26]="PRINTER_INFO=Canon iR-ADV C5000s-B1 PSV1.0US"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[27]="PRINTER_LOCATION="
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[28]="PRINTER=Canon_iR_ADV_C5000s_B1_PSV1_0US"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[29]="PRINTER_STATE_REASONS=none"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[30]="CUPS_FILETYPE=document"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[31]="FINAL_CONTENT_TYPE=printer/Canon_iR_ADV_C5000s_B1_PSV1_0US"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] envp[32]="AUTH_I****"
    D [29/Jan/2013:10:48:02 -0500] [Job 2] Started filter /usr/libexec/cups/filter/pstops (PID 447)
    D [29/Jan/2013:10:48:02 -0500] [Job 2] Started filter /Library/Printers/Canon/PS3/PDEs/EF118958/fierycupsfilter (PID 448)
    D [29/Jan/2013:10:48:02 -0500] [Job 2] Started backend /usr/libexec/cups/backend/dnssd (PID 449)
    D [29/Jan/2013:10:48:02 -0500] [Job 2] execv failed: Permission denied
    D [29/Jan/2013:10:48:02 -0500] [Job 2] PID 448 (/Library/Printers/Canon/PS3/PDEs/EF118958/fierycupsfilter) stopped with status 1.
    D [29/Jan/2013:10:48:02 -0500] [Job 2] Hint: Try setting the LogLevel to "debug" to find out more.
    D [29/Jan/2013:10:48:02 -0500] [Job 2] Resolving "Canon iR-ADV C5000s-B1 PSV1.0US._printer._tcp.local."...
    D [29/Jan/2013:10:48:02 -0500] [Job 2] STATE: +connecting-to-device
    D [29/Jan/2013:10:48:02 -0500] [Job 2] Resolving "Canon iR-ADV C5000s-B1 PSV1.0US", regtype="_printer._tcp", domain="local."...
    D [29/Jan/2013:10:48:02 -0500] [Job 2] Looking for printer.
    D [29/Jan/2013:10:48:02 -0500] [Job 2] Page = 792x1224; 7,11 to 785,1213
    D [29/Jan/2013:10:48:02 -0500] [Job 2] slow_collate=0, slow_duplex=0, slow_order=0
    D [29/Jan/2013:10:48:02 -0500] [Job 2] Before copy_comments - %!PS-Adobe-3.1
    D [29/Jan/2013:10:48:02 -0500] [Job 2] %!PS-Adobe-3.1
    D [29/Jan/2013:10:48:02 -0500] [Job 2] %ADO_DSC_Encoding: UTF8
    D [29/Jan/2013:10:48:02 -0500] [Job 2] %%Title: (Option 1.pdf)
    D [29/Jan/2013:10:48:02 -0500] [Job 2] %%Creator: (Adobe Acrobat 11.0.1)
    D [29/Jan/2013:10:48:02 -0500] [Job 2] %%For: brian
    D [29/Jan/2013:10:48:02 -0500] [Job 2] %%CreationDate: 1/29/13, 10:47 AM
    D [29/Jan/2013:10:48:02 -0500] [Job 2] %%BoundingBox: 11 7 1213 785
    D [29/Jan/2013:10:48:02 -0500] [Job 2] %%HiResBoundingBox: 11.3400 7.3376 1212.6600 784.6624
    D [29/Jan/2013:10:48:02 -0500] [Job 2] %%CropBox: 11.3400 7.3376 1212.6600 784.6624
    D [29/Jan/2013:10:48:02 -0500] [Job 2] %%LanguageLevel: 3
    D [29/Jan/2013:10:48:02 -0500] [Job 2] %%DocumentNeededResources: (atend)
    D [29/Jan/2013:10:48:02 -0500] [Job 2] %%DocumentSuppliedResources: (atend)
    D [29/Jan/2013:10:48:02 -0500] [Job 2] %%DocumentNeededFeatures: (atend)
    D [29/Jan/2013:10:48:02 -0500] [Job 2] %%DocumentSuppliedFeatures: (atend)
    D [29/Jan/2013:10:48:02 -0500] [Job 2] %%DocumentData: Clean7Bit
    D [29/Jan/2013:10:48:02 -0500] [Job 2] %%PageOrder: Ascend
    D [29/Jan/2013:10:48:02 -0500] [Job 2] %%TargetDevice: (Canon iR-ADV C5000s-B1 PSV1.0US) (3017.102) 1
    D [29/Jan/2013:10:48:02 -0500] [Job 2] %%Pages: (atend)
    D [29/Jan/2013:10:48:02 -0500] [Job 2] %%DocumentProcessColors: (atend)
    D [29/Jan/2013:10:48:02 -0500] [Job 2] %%DocumentCustomColors: (atend)
    D [29/Jan/2013:10:48:02 -0500] [Job 2] %%EndComments
    D [29/Jan/2013:10:48:02 -0500] [Job 2] Before copy_prolog - %%BeginDefaults
    D [29/Jan/2013:10:48:02 -0500] [Job 2] Before copy_setup - %%BeginSetup
    D [29/Jan/2013:10:48:02 -0500] [Job 2] Before page loop - %%Page: 1 1
    D [29/Jan/2013:10:48:02 -0500] [Job 2] Copying page 1...
    D [29/Jan/2013:10:48:02 -0500] [Job 2] pagew = 1201.3, pagel = 777.8
    D [29/Jan/2013:10:48:02 -0500] [Job 2] bboxx = 0, bboxy = 0, bboxw = 1224, bboxl = 792
    D [29/Jan/2013:10:48:02 -0500] [Job 2] PageLeft = 11.3, PageRight = 1212.7
    D [29/Jan/2013:10:48:02 -0500] [Job 2] PageTop = 784.9, PageBottom = 7.1
    D [29/Jan/2013:10:48:02 -0500] [Job 2] PageWidth = 1224.0, PageLength = 792.0
    D [29/Jan/2013:10:48:02 -0500] [Job 2] Wrote 1 pages...
    D [29/Jan/2013:10:48:02 -0500] [Job 2] PID 447 (/usr/libexec/cups/filter/pstops) exited with no errors.
    D [29/Jan/2013:10:48:02 -0500] [Job 2] Resolved as "lpd://CanonC5045.local.:515/print"...
    D [29/Jan/2013:10:48:02 -0500] [Job 2] STATE: -connecting-to-device,offline-report
    D [29/Jan/2013:10:48:02 -0500] [Job 2] Executing backend "/usr/libexec/cups/backend/lpd"...
    D [29/Jan/2013:10:48:02 -0500] [Job 2] STATE: +connecting-to-device
    D [29/Jan/2013:10:48:02 -0500] [Job 2] Looking up "CanonC5045.local."...
    D [29/Jan/2013:10:48:02 -0500] [Job 2] backendWaitLoop(snmp_fd=5, addr=0x7f8d70c0dba8, side_cb=0x10bb23a13)
    D [29/Jan/2013:10:48:02 -0500] [Job 2] PID 449 (/usr/libexec/cups/backend/dnssd) exited with no errors.
    D [29/Jan/2013:10:48:02 -0500] [Job 2] End of messages
    D [29/Jan/2013:10:48:02 -0500] [Job 2] printer-state=3(idle)
    D [29/Jan/2013:10:48:02 -0500] [Job 2] printer-state-message="Looking for printer."
    D [29/Jan/2013:10:48:02 -0500] [Job 2] printer-state-reasons=none

  • Hp 6500 (all-in-one) "General Printing Error (Ox610000f6)" displayed after first use!

    I unpacked my new hp 6500 All-in-One (wireless) today. I was receiving my first fax on the hp 6500 when it stopped printing midway and started to display "ERROR. General Printer Error (Ox610000f6). Refer to printer documentation." I have turned it off and unplugged it many times. It does not work at all. Error message has been displayed all day. This is ridiculous. If I can't resolve this tomorrow it's going back to the store and I'm getting another brand.
    There is also NO reference for the error code. Weak. 
    Message Edited by marie14 on 07-12-2009 10:37 PM

    The original poster just acquired their printer.  In this case, the solution was to simply replace it as it was still under warranty.
    The error code indicates an internal detected logic fault.  These fall into two classes:  transient events and faults do to failed HW.  Transient events are often solved by simply power cycling the printer after disconnecting all I/O.  Permanent faults are typically not repairable by the user.
    I understand your frustration.  If the printer is still under warranty, then simply ask H-P to replace it.
    Other solutions are to reset the printer's NVRAM.  For those with an Officejet 6500, the reset method is to press and hold the * and 6 keys while plugging in power and then continue to hold for another 10 seconds.
    Regards / Jim B / Wireless Enthusiasts
    ( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
    + Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

  • Printing Errors in CS5

    Hello All.
    I recently updated to CS5. Mac OS 10.6.6. Indesign 7.03.
    With many documents created in CS4 and then opened in CS5, I am getting an error printing: "Printing Error: The ASdobe Print Engine has failed to output your data due to an unknown error".
    In some documents, I was able to troubleshoot this by disabling printing on every element in the doc, one at a time, and when it printed, replaced that element.
    This is good for a document that has few elements. If it's a large document, I'm in big trouble.
    Also some documents just don't end up printing at all. I'm forced to export to PDF and print that. Pain, to say the least.
    And if I open the document (original version, without saving up to CS5) in CS4 again, they print perfectly.
    Anybody have any suggestions?
    Also, I noticed the export to .inx option is gone. Why?
    Thanx.

    What can I say? Code changes from version to version.
    Once upon a time I could run a car on leaded gasoline (I'm old), and in the not so distant past I could watch TV on my existing equipment without needing a digital converter box. Things change. Not always for the best.

  • HP photo smart 7520 all in one printer error. B8867448.

    Screen flashing. Message "printer error. There is a problem with the printer. Turn the printer off, then on". When it is turned off, then on, the blue Hewlett Packard screen flashes with B8867448, then it returns to error message.
    This question was solved.
    View Solution.

    June 18, 2014:  My HP7520 Photosmart isn't so smart.  Error B8867448 shows up in blue screen and then an error screen shows up:  Printer Error.  There is a problem with the printer.  Turn the printer off, then on.  
    I called HP service and went all the way up through a supervisor to the "higher authorities" in India.  I am a valued HP customer so they are giving me a very very special offer.  We unplug it for a minute and get the same problem.  The cartriges are also stuck and won't move.  They say this is the source of the hardware problem.  Then he states it is a "hardware" problem.  Really.  
    After several conversations with the "supervisor" he gets my phone number and calls me back from his "personal office desk" with a very very valuable offer that is not available to all customers.  
    They can only offer a discount on the printer, which is similar to Amazon.  I bought it for $138.85 (tax included - it was $129.99 before tax) over a year ago at Best Buy so the warantee is out of date.  He offers an HP Photosmart 7520 for $149.99.....?? - after I mentioned my original purchase price, he dropped it to $127.91.  I save a dollar.  
    But get this!!!!
    Cartridges are for free.  
    Free shipping and handling. 
    3-warantee for free.  
    Still, my old computer has to go in the trash - stuck cartridges and all.  
    The new printer will be tested TWICE by HP "itself"!  Now that's confidence for me!  I why the double testing??  
    Reason:  
    It is a reconditioned printer, by the way.  I don't like that and patiently mentioned it was not a sufficient offer:  $1 discount from a new printer.  
    Now they are offering $10 off the reconditioned printer.  I state that this is still not sufficient.  
    The phone rep tells me 100 printers are sold to Best Buy and 80 are delivered (what does that mean?!)
    Just because the box is opened due to a long shelf-storage doesn't mean it is a bad computer.  They test it again since it's old so now it's tested twice and will work for me perfectly.  They are 100% sure the printer will work for me and this problem will not happen again.  
    If the problem DOES happen, they will provide free shipping and a free replacement.  (wha-huh??  did I miss something there???)
    He says I can go to website:  www.hp.com/recycle.com - log onto this website and I can recycle the printer without throwing it in the trash!!!   Such a deal!  I don't feel any better.  Trash is trash as far as I'm concerned.  
    I replied:  "Your offer is not satisfactory to me" and once again I'm on hold.  Hold time to this point is over an hour.  Sigh.  
    I'm finding that replying "Thank you but your offer is not satisfactory to me." in a calm voice gets me a little teeny weenie bit further in price reduction, but not worth the bother.  
    He talks to his supervisor and says they know I'm not happy.  So now I get it for $86.10, with free shipping, cartridges and a 3-year warantee for free.  
    How do I return it?   I call them and they send me a label.  I have to save the box and repack it.  I can also return the printer after 14 days.  What if I can't repack it properly with all the parts, etc????  He says to stick it in the box and mail it.  That's easy I guess......
    This is just as good as a new one, even though it is reconditioned.  This is the best offer they can give me.  
    "Would you like to go for it?".   It is not refurbished, it is reconditioned.  The difference is there are no cosmetic defects with a reconditioned printer.  
    I insist on a free replacement.  He goes off to talk to his supervisor once again.  Silly, eh?  I stay calm and patient and it might work!  I mention I love HP and have always bought HP products.  They are documenting everything, he says.  Then I wait again.  He has my number and I'll get a phonecall back from his higher authorities within 24 hours.  
    I confirm - he's in India.  Yay.  He if there's anything else he can do for me.  I reply that would simply like my printer replaced.   He wishes me a "beautiful day" and says "bye bye" and hangs up.   
    Incredible.  I'm throwing it away and buying an Epson -810 or a Canon Pixma - consumer reports recommended printer.  I hear the trash truck so I'm taking my printer out to the trash (in a nice new trash bag).  I won't buy another HP printer again - ever.  
    Hope this helps.  Sorry if you have the same issue.  Final time of calls with Indians:  2 hours.  OMG.  **bleep**.  I give up.  

  • Printer Error - Epson 3880 & LR and talking with each other?

    I am trying to use the Epson 3880 with LR; however, I get a printer error every time I try to print. The error shows up in the printer status and is immediate.
    The printer works fine with iPhoto.
    It is connected and the Utility is speaking with printer.
    I have downloaded the most recent drivers (which haven't been updated by Epson in awhile.)
    I have the color being managed by the printer.
    What else could it be?
    I am very new to this and could use some help.
    Thank you in advance.

    I suppose that can’t hurt to reinstall.
    Do you have a 2nd machine you can try as well?
    One thing you might try is logging in as another user and seeing if you can print. IF so, then there’s something in the original log-in Library that’s an issue. I think (I’m not sure) that the driver should be accessible for all users. If however, you can’t print as another user, then its something in the main system that’s at fault here.
    You could also try resetting CUPs (the printer system) if you feel comfortable in Terminal. In Terminal type:
    sudo cupsd

  • Country name is not printing F110

    Hi All,
    The country name is not printing on the check when using transaction F110 for one vendor. I checked the vendor master and country is there. I do not have any idea about transaction. Please help me find out what is causing the error.
    Thanks,
    Veni.

    Check printing SAPScript uses the Address ... Endaddress command of the SAPScript.
    In this command, if you provide the sender country as fixed value than, it will not print the country for the vendor in the same country.
    /: FROMCOUNTRY sender country
    Check this help:
    http://help.sap.com/saphelp_40b/helpdata/en/d1/803238454211d189710000e8322d00/content.htm
    Regards,
    Naimesh Patel

  • HERKL (country of origin) not updated during material master upload

    Hi all,
    I  have a problem in material master update, when iam doing material master update.......i have uploaded more than 18000 records,
    where few ariund 800 records are not updated with HERKL( Country Of Origin).......
    Could you please help on the above query.
    Regards
    Jagadeeshwar B
    Moderator message: subject corrected, please use a more descriptive one next time.
    Edited by: Thomas Zloch on Aug 20, 2010 11:36 AM

    Have you analyzed what is common to the errors?
    is it the countries that are used in this cases?
    or is it a certain material type?
    do you have any succesfull update with a country that is among the failed ?
    Have you tried manually to enter this field  in MM02 for such a material?
    we can only guess, maybe a typo in the country code, maybe county does not have an Iso code, maybe the field in hidden in create transaction for this material type.....

  • Country of origin not valid; country of origin is not allowed or does not exist

    Dear Expert,
    I am using SAP 9.0 PL 09 , its upgraded from 8.82. Now my problem is while updating the Sales quotation and sales order only particular series name it getting the following error with effect from  2009 to till date sales quotations and sales order. I have multiple series name.
    "Country of origin not valid; country of origin is not allowed or does not exist"
    i  have  some addon but if i stop and proceed also the same problem comming. Can any one help me it will be good.
    Thanks in advance.
    Thanks and regards,
    Shamugam V.

    Symptom
    It is not possible to add or update marketing documents if an item has a value in the Country of Origin field. The application displays the following error message: "Country of origin not valid; country of origin is not allowed or does not exist".
    Reproducing the issue
    Prerequisites:
    Your company database is not in the Russia localization or you have not enabled the Intrastat feature that is relevant to EU countries only.
    Scenario:
    1. Create or update an item using the DI API. Specify a value for in the Country of Origin field. (Note that this field is not visible in the application).
    2. Try to create a marketing document (that is, an invoice using this item).
    Actual behavior:
    The document cannot be added and the application displays the following error message "Country of origin not valid; country of origin is not allowed or does not exist".
    Expected behavior:
    The document can be added.
    Cause
    Application error
    Solution
    WORKAROUND:
    Update the affected items using the DI API as follows:
    1.  Run the following query to identify the affected items:
    select CountryOrg, * from oitm where CountryOrg is not null
    2.  In the Country of Origin field, set a blank value.
    SAP intends to provide a patch or patches in order to solve the problem described. The section Reference to Related Notes below will list the specific patches once they become available.
    The corresponding Info file of the patches in SAP Service Marketplace will also show the SAP Note number. Be aware that these references can only be set at patch release date.
    SAP will deliver patches only for selected releases at its own discretion, based on the business impact and the complexity of the implementation.
    Other terms
    country of origin, DI API, marketing documents

  • Country of origin doenot exist

    hi all,
    whle trying to add a material to po i m getting the error message"  material does not have country of origin "
    can anybody help me why it is coming and where do we maintain country of origin for a mat.
    thanks regards
    sarabjit

    Sarabjit,
    Please go the Info record of the material and on the Pur Org data screen maintain the Country of origin.
    The Vendor which you must be selecting is having different region in the vendor master than the Plant master master for which you are raising the PO so an export import functionality is coming into play.
    Thanks,
    Biren Agnihotri

  • New country of origin for European country" CE"  Urgent

    Hi,
    I have to add country of origin code "CE" (Communauté Européenne) for the European community. From beginning of July it is no longer allowed to use "EG" (Europäische Gemeinschaft)
    or "EC"(European Community) as short terms for foreign trade export. These both ISO-Alpha Codes belongs to EG = Egypt and EC = Ecuador.
    For materials which are produced in Europe but the country is not defined, we have to use "CE" in the future. The printed text must be:
    - In German: Europäische Gemeinschaft
    - In English: European Community
    - Swedish: Europeiska gemenskapen
    - Finnish: ???
    In material master in foreign trade export view in country of origin I have to add CE as the European community, but I am not able to understand how can I have a European community code CE for all the european countries as CE is not representing a single country.
    Please provide some useful input
    Regards,
    Yatendra

    Hi,
    This is really urgent
    Regards,
    Yatendra

  • Impact of change of field Country of origin in material master

    HI EXPERTS,
    what is the impact of change of field Country of origin in material master(Foreign trade data ) on sales order ,delivery and invoice ?
    also will it impact the existing document if we had changed the country of origin in material master?
    Appreciate your early response!
    Thanks
    Manish gupta

    hi
    this is to inform you that
    you are telling about FOREIGN TRADE & CUSTOMS.
    it will be having impact on sales delvery and billing as well as sales document is optional and the
    delivery document will be stopped with GTS error with LEGAL CONTROL ISSUE.
    if you over comes that then you will be caught in billing
    in billing document will be stopped with ERROR called FOREIGN TRADE DATA INCOMPLETE.
    because it deals with FTC.
    regards
    balajia

  • AX 2012 Country of Origin

    I am trying to identify how to have multiple country of origins linked to the the same item.  I have product where manufacturing has changed to a different country.  However, the product currently in inventory could be either from the old manufacturing
    country or the new one.  This creates an issue when exporting the product as the system currently only references one country of origin.
    Does AX2012 have any configuration options to handle multiple COO?

    Unfortunately your post is off topic here, in the TechNet Site Feedback forum, because it is not Feedback about the TechNet Website or Subscription.  This is only one forum among the many
    that are on the TechNet Discussion Forums, and given your post, you likely chose the wrong forum.  This is a standard response I’ve written up in advance to help many people (thousands, really.) who post their question in this forum in error, but please
    don’t ignore it.  The links I share below I’ve collected to help you get right where you need to go with your issue.
    For technical issues with Microsoft products that you would run into as an
    end user of those products, one great source of info and help is
    http://answers.microsoft.com, which has sections for Windows, Hotmail, Office, IE, and other products. Office related forums are also here:
    http://office.microsoft.com/en-us/support/contact-us-FX103894077.aspx
    For Technical issues with Microsoft products that you might have as an
    IT professional (like technical installation issues, or other IT issues), you should head to the TechNet Discussion forums at
    http://social.technet.microsoft.com/forums/en-us, and search for your product name.
    For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), you should head to the MSDN discussion forums at
    http://social.msdn.microsoft.com/forums/en-us, and search for your product or issue.
    If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here:
    http://community.dynamics.com/
    If you really think your issue is related to the subscription or the TechNet Website, and I screwed up, I apologize!  Please repost your question to the discussion forum and include much more
    detail about your problem, that could include screenshots of the issue (do not include subscription information or product keys in your screenshots!), and/or links to the problem you’re seeing. 
    If you really had no idea where to post this question but you still posted it here, you still shouldn’t have because we have a forum just for you!  It’s called the Where is the forum for…?
    forum and it’s here: http://social.msdn.microsoft.com/forums/en-us/whatforum/
    Moving to off topic. 
    Thanks
    MSDN and TechNet Subscriptions Support
    Did Microsoft call you out of the blue about your computer?
    No, they didn't.

  • Keep getting printer error message. Have apple compr using hp ohotosmart c4680 all in one printer.

    I am having problems printing from my IMAC computer.  I am using photosmart C4680 all in one printer.  I have repeatedly uninstalled printer and reinstalled printer from original disc.  Error message coming up when I attempt to print.  Used to print from Hp officejet printer d145.  I began having problems with it.  I have discontinued printing from it and I have uninstalled software from that printer.  Error message states "Library/StartupItems/HP All-In-One Communications" has not been started because it does not have the proper security settings" message comes up when starting up computer.  How do I correct this problem?

    I recommend that you take a look at the following document. It should help to resolve your issue. 
    hp printer/scanner/copier 900 series software/driver
    Try that and let me know if it works for you or not. If it doesn't let me know what happened and I will see what I can do from there.
    Best of luck,
    Kyle
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Maybe you are looking for