Country specific "Israel " not found while creating wage type in ECC 6

Hi
While creating the wage type , I am not able to find Israel as a country in the drill down.
Should this be taken as Others or what is the procedure when we are unable to find a country to select.
Thanks
Vardhini

Hi Vardhini,
You dont have payroll driver for Israel.. You have to assign Molga "99" in u r user profile, and u also need assign "99" as molga in the node assignement of personnel area to company code.
Hope this should resolve ur issue.
Regards
Anil.C
Reward the points if my answer helps you out.

Similar Messages

Error "Specifed Key not found" while installing Oracle 11g R2 db

Hi,
I am new to installing oracle 11gr2 DB. While installing at the stage of "install product" during the process of .Copy files its throwing the following error
*Specified Key not found
Please help me solving this problem. Your help is much appreciated.
Thanks in advance.

979400 wrote:
Hi ..
I am getting the "Specified Key not found" while installing Oracle 11 g r2 on windows 8 (64 bit) and below is the installation log , Please help me .
Number one - you are hijacking someone else's thread. Please read the forum FAQ. The link to that is conveniently located in the upper right corner of this very page.
Number two - no oracle product is certified to run on Window 8. If you want to run an Oracle product, you need to use an OS which Oracle has certified for said product.
ID: oracle.install.driver.oui.OUISetupDriver:13
oracle.cluster.verification.PreReqNotSupportedException: Reference data is not available for verifying prerequisites on this operating system distribution
     at oracle.cluster.verification.constraints.XmlTaskFactory.getTasks(XmlTaskFactory.java:248)
     at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:4538)
     at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:4487)
     at oracle.cluster.verification.ClusterVerification.isPreReqSupported(ClusterVerification.java:6382)
     at oracle.install.driver.oui.OUISetupDriver.verifyEnvironment(OUISetupDriver.java:299)
     at oracle.install.driver.oui.OUISetupDriver.load(OUISetupDriver.java:422)
     at oracle.install.ivw.db.driver.DBSetupDriver.load(DBSetupDriver.java:161)
     at oracle.install.commons.base.driver.common.Installer.run(Installer.java:216)
     at oracle.install.ivw.db.driver.DBInstaller.run(DBInstaller.java:129)
     at oracle.install.commons.util.Application.startup(Application.java:869)
     at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:164)
     at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:181)
     at oracle.install.commons.base.driver.common.Installer.startup(Installer.java:265)
     at oracle.install.ivw.db.driver.DBInstaller.startup(DBInstaller.java:117)
     at oracle.install.ivw.db.driver.DBInstaller.main(DBInstaller.java:148)
---# End Stacktrace #-----------------------------
---# Begin Stacktrace #---------------------------
ID: oracle.install.commons.util.exception.DefaultErrorAdvisor:16
oracle.cluster.verification.PreReqNotSupportedException: Reference data is not available for verifying prerequisites on this operating system distribution
     at oracle.cluster.verification.constraints.XmlTaskFactory.getTasks(XmlTaskFactory.java:248)
     at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:4538)
     at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:4487)
     at oracle.cluster.verification.ClusterVerification.isPreReqSupported(ClusterVerification.java:6382)
     at oracle.install.driver.oui.OUISetupDriver.verifyEnvironment(OUISetupDriver.java:299)
     at oracle.install.driver.oui.OUISetupDriver.load(OUISetupDriver.java:422)
     at oracle.install.ivw.db.driver.DBSetupDriver.load(DBSetupDriver.java:161)
     at oracle.install.commons.base.driver.common.Installer.run(Installer.java:216)
     at oracle.install.ivw.db.driver.DBInstaller.run(DBInstaller.java:129)
     at oracle.install.commons.util.Application.startup(Application.java:869)
     at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:164)
     at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:181)
     at oracle.install.commons.base.driver.common.Installer.startup(Installer.java:265)
     at oracle.install.ivw.db.driver.DBInstaller.startup(DBInstaller.java:117)
     at oracle.install.ivw.db.driver.DBInstaller.main(DBInstaller.java:148)
---# End Stacktrace #-----------------------------

Audit types which are configured not found while creating Audit

Hi Experts,
Please help me to solve the below problem-
I have configured new Audit types in Audit managment. But while creating Audit in transaction PLMD_AUDIT, I could not find these in drop down of Audit type. How to rectify this problem?
Thanks in advance
Kiran

1. In which system you are checking - if you have checking in Quailty client make sure your configuration has been transported from your
2. Just make sure you have configured the audit type -> SPRO -> cross app. components -> audit management -> audit definition -> audit type.
There is no possibility you cannot see in the dropdown.
Regards-

Integration Server not found while creating Business system

Hi all,
I m facing following problems in XI.
While creating Business system, "integration server" name is not displayed in the drop down box. and
I m getting the error "Unable to read software component versions from System Landscape Directory "XXXXXX:50000"" while importing software components in Repository from SLD.
thanks and regards
vijay

Hi Vijay
Please check if you have assigned the correct Integration server to the business system in SLD.
and for the the software component error check if the user has required access (roles assigned) for importing the software component.
Thanks
-Mitesh

PARTNER PROCESSING OBJECT BUS2032 NOT FOUND WHILE CREATING SALES ORDER

Hi All,
I am not able to create a sales order it gives a Error "PARTNER PROCESSING OBJECT BUS2032 not found". Can any one inform me what could be a problem. Thanks in advance.

Yes, The Partner function SP is active.
We had a work around.
When the sales order was saved, being in Partner function Tab we got the error message. However when we returned to the Overview and saved the Order, we were through with the same. But, Iam not sure how could this happen.

Vendor not found while creating SC after replicating from r/3 to srm

Hi all
I tried to replicate some vendors from r/3 to srm and when i used the t-code bbpgetvd i got a message that it has already been replicated but wheni am trying to create a Shopping Cart and assigning vendor to the cart it is giving me a message that no supplier is assign and no possible source of suply found in the system?PLS answer my question its urgent.

Hi Pooja,
I understand that you have moved your partner information from R/3 to SRM. In SRM, all the Partner(vendor) information is stored in BUT000 master table. The type of partner = 02.
Go to transaction BP in SRM and check for the partner data. If found, go to master table BUT000 and check there. If you dont find your data overthere track the msg flow.
Else you should be able to create the cart.
Regards,
Karthik Babu
Edited by: karthik babu pulluru on Jan 13, 2012 7:38 AM

Ora driver not found while creating an SPL based adapter

Hi,
I was trying to create an SPL adapter.
When I select the database ("ORCL") where the SPLs are locate I get in the notes
of Design Console:
**** Exception ****
Exception Type: java.lang.ClassNotFoundExceptionMessage: oracle.jdbc.driver.OracleDriver
I copied ojdbc14.jar the from OIM_HOME/xellerate/ext to OIM_DC_HOME/xlclient/ext
as recommended by the manual.
Do I need to do something else? The IT resource ORCL should be ok, it is used
in other modules.
Thanks a lot in advance.

> )#ORA-01114: IO error writing block to file 255 (block #
please check which data file is with id 255 ?
you can use below query for this :
SQL> select file_name, tablespace_name, file_id, status from dba_data_files where file_id= 255;
If this is a temp data file, you can work with resolution of below SAP Note.
1890999 - ORA-01114 ORA-27072 occurs for Tempfiles
best regards
ashish

System Type ERP not available while creating Buisness System For ECC in SAP Sourcing 9.0

Hi,
I need to import Master data in SAP Sourcing but when i am uploading master data i am getting this errror
Business system ECQCLNT340 does not match with local SAP Sourcing System ID SOURCING.
i have followed the steps in config guide of SAP ERP with SAP Sourcing.
when i am creating business system in SAP Sourcing system type ERP is not available.
i have also attached the error file, please check
--------------Version---------------
ECC 6.0 Ehp6
SAP Sourcing 9.0 on NW7.3 Ehp1 on IBM DB2
Thanks and Regards,
Murtaza Najmi

Thanks you Prasad,
this issue has been resolved and i have completed the installation part of SAP Sourcing and Contract generation.
Now , I am getting error while uploading clause document, my functional team member are not able to upload clause document. kindly suggest.
----------------------Error Description---------------
Login with buyer link into the system-> it has all authorizations
then Goto -> Contract Management -> Clause Library -> Clause list -> Click on New button -> Click on Add button -> Browse Document
it is showing POPUP with Error that "There is a problem with the Contract Generation web service Contact your system administrator"
Thanks and Regards,
Murtaza Najmi

" APPLICATION NOT FOUND" while deploying Web dynpro java Application

Hi, I am getting a message that "application not found " While deploying the web dynpro java application .......... please give me a solution for this .

Hi Ram,
This error comes generally when your webdynpro project does not have an application. To create an application in your webdynpro project follow the underlying steps:
<Project>->WebDynpro->Applications ---> right click and create New Application.
Follow the steps to create the application.
Now if you create archive and deploy, it will not give you the error again.
Best Regards,
Ravi

Payment Method supplement is not found while posting invoice thru' F-43

Dear Gurus,
I have configured Vendor Account group (OBD3) & created a vendor account (XK01).While posting thru' T code F-43,an error "Enter payment method supplement in line item 001" is found.But, payment method supplement field is not found while posting.Please solve my problem.

hi ,
In F-43 when you enter the document & posting date, company code, currency , And Vendor number PRESS ENTER it will take you to next screen There you can find the PAYMENT METHOD tab under invoice reference .
hope this will help you .

CASE not found while executing CASE statement on Submit Form

Hi to all APEX users and developers.
I have several APEX applications and they are all working well, but recently I got one strange exception when I try to submit page:
Session: Fetch session header information
...metadata, fetch page info
...Validate item page affinity.
...Validate hidden_protected items.
Add error onto error stack
...Error data:
......message: Error processing request.
......additional_info: ORA-06592: CASE not found while executing CASE statement
......display_location: ON_ERROR_PAGE
......is_internal_error: true
......apex_error_code: APEX.UNHANDLED_ERROR
......ora_sqlcode: -6592
......ora_sqlerrm: ORA-06592: CASE not found while executing CASE statement
.....error_backtrace: ORA-06512: at "APEX_040100.WWV_FLOW", line 9273
......component.type: APEX_APPLICATION_AUTH
......component.id: 41350431648668800
......component.name: MNRFR
...Show Error on Error Page
......Performing rollback
Processes - point: AFTER_ERROR_HEADER
Processes - point: BEFORE_ERROR_FOOTER
End Page Processinga
Page has more than 120 items (most of them are hidden), so my first thought is that page has problem with posting so many items, but APEX error message doesn't hel me at all. Any help would be very appreciated :)
Almir

Hi Almir,
actually it is the 100 page item limit. See (http://download.oracle.com/docs/cd/E17556_01/doc/user.40/e15517/limits.htm)
I also had a look into the source code and the code at the position where the error gets raised only supports 100 page items.
Can you have a look into the generated HTML code and look if you have a page items which is mapped to p_t101 or a higher number ?
I will file a bug to show a better error message.
Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

Getting error 'Item 00000 does not exist' while creating a salse order

Hi All,
We are facing an issue, we get an error message saying 'Item 00000 does not exist' while creating a sales order for a particular order type, we do not get this problem with all the materials, only a few of them and the materials which give a problem are part of the supersession chain. The problem is not even coming for all the superseded materials.
This problem is occuring with none of the other order types but just one. We have compared the configuration for the order types for which this error is not coming and the order type which is giving the problem, and its exactly the same.
When creating the sales order through VA01 even though the error message comes, but on hitting the enter button the processing goes further. But when creating the sales order through the background program the processing stops the moment the error message comes and the Sales Order does not get created.
Your valuable suggestions for helping us resolving this issue will be highly appreciated.
Regards,
Geeta

HI Geeta
As per your post "Problem is when you are executing VA01 in background sales orders are not generating due to error message".
Apart from configuration check alternative is "Take ABAPer's help and change this error message type to warning/information message type in the system". With warning/information message type you could be able to create sales orders in background also.
try and revert

Entity Attributes are not populating while creating EO using EO wizard.

Hi,
I am using JDeveloper version 10.1.3.3.0.3 and E-Business suite12.1.2.
I am facing problem while creating EO using EO wizard.
In Entity Object Editor Entity Attributes are not populating while creating EO.
Please help me resolve this issue.
Thanks & Regards,
Sagarika

Please ensure you click on Tables and Synonyms check box and select proper schema.
Try to select the table from the list after this instead of writing as in 10.1.3 when we write table name it automatically selects from the list if it exists in the list.
Thanks
AJ

Error 404 -- Not Found while accessing weblogic console

Hi
I get Error 404 Not Found while accessing the console or any other application
which is deployed on the server
while the server is running even i have restarted my server
it shows server running in the log files as well as on the command console .
but when i try to access console or any other application it gives me error page
404 Not Found
I am using weblogic 7 with SP2 on solaris
So please help me in debugging the problem
Thanks in advance....
Pratap

Hi
I get Error 404 Not Found while accessing the console or any other application
which is deployed on the server
while the server is running even i have restarted my server
it shows server running in the log files as well as on the command console .
but when i try to access console or any other application it gives me error page
404 Not Found
I am using weblogic 7 with SP2 on solaris
So please help me in debugging the problem
Thanks in advance....
Pratap

BADI ME_PROCESS_PO_CUST is not triggering while creating/changing PO

Hi,
I am new to BADIs,
I am trying to implement BADI ME_PROCESS_PO_CUST in ECC 6.0. I have done the implementation and activated. I kept a break point in PROCESS_ITEM method, but the BADI is not triggering while creating or changing the PO. Please advice me what could be the reason behind this?
I used the SQL trace but i couldn't get the BADI ME_PROCESS_PO_CUST in the list.
thanks in advance
Regards
Jagadish

hello jagdish,
implement this user exit.....
MM06E005...
go to EXIT_SAPMM06E_017 in that then you can put a break point in the user defined function module.....
or use
BREAK 'C5133392' (use your user in place of C5133392)....it will stop here while creating PO or changing PO...
now you can do whatever you want to do in create or change PO using this function exit......
perform the validations on import parameters.....to create or change ....and activate the project....
hope this will give you some idea and help

Country specific "Israel " not found while creating wage type in ECC 6

Similar Messages

Maybe you are looking for