Course Appraisal (OSA-LSO)

Hi All,
I have created a OSA template for Providing feedback to the courses attended my the employees...The problem is that in the Template the course field shows all the courses that are in the system instead of only the courses attended or completed by the employee....
I have tried maintaining "Add Booked Courses" for fixed Enhancement in the, But does not help.
Appreciate any input on the same.
Thanks.

Hi All,
Can this issue be resolved in LSO by assigning the Appraisal template to the course or any other way.
The requirement is to create a feedback template for all the courses completed by the employee in LSO.
Awaiting your valuable inputs.
Thanks.

Similar Messages

  • LSO - Perform Course Appraisal

    Hi All,
    I have this requirement where I m suppose to check which all participants have performed the course appraisal which they atteneded (Classroom or WBT).
    Requirement is to send a mail to all the participants who have attended the training but not performed the course appraisal.
    Thanks in advance,
    Neha

    Hi,
    Please find the solution for this requirement.
    "A notification to remind employees to complete a course appraisal form after the completion of the course.
    Condition 1: No reminder should be sent out if an employee hasnu2019t attend the course.
    Condition 2: The reminder should be only for course followup action is done.
    Condition 3: If an employee doesnu2019t have an email address then his/her manager needs to be notified by email that their employees will have to fill out a course evaluation form.
    Condition 3A: For a classroom course, if there is more than one employee in a team attending the course, then a single email should be sent out to the manager listing all the employees in his/her team that have attended the course but do not have an email address."
    Fetch all the class room courses (Object Type E or ET ) and its relationships (A/025) with Person (Object Type P) and get their ADATANR and PERNR
    Validate and fetch the followup flag for all the available ADATANR from HRPAD25 (adatanr ,followup flag) and sort Object wise (E) PERNR's
    get the appraisal document ids based on course E or ET Type and extended appraisee Id from HRHAP_APPEE
    Based on above appraisal document Ids and persid from HRP1001 and type P,get the consolidated documents from HRHAP_APPER
    Fetch the data from hrhap table and get the appraisal status other than 5, based on above consolidated data
    Based on the above cons data we have to get the email ids.
    If email ID's are not available for the attendees, the consolidated email notification has to send to the reporting position at course level.  (Check A/002 relationship).
    Thanks,
    Anil

  • LSO Pre-Course Appraisal Form

    Hi All,
    How can I create pre-course appraisal form?? Is it the same concept as the post-course appraisal form?
    Cheers.
    Jill

    Hi,
    Go to SPRO
    Training and Event Management - Training Management - Recurring Activities - Appraisals - Define Form
    Training and Event Management - Training Management - Recurring Activities - Appraisals - Form of Appraisal
    Training and Event Management - Training Management - Recurring Activities - Appraisals - Edit Scales
    Training and Event Management - Training Management - Recurring Activities - Appraisals - Edit Appraisals Catalog
    Set up control parameters as
    SEMIN - EVAEV - appraisal form  ID
    SEMIN - EVAPA - appraisal form ID
    Both appraisals are same, but form will be different depend on your criteria group and criteria for evaluation.
    Check whether this resolves your querie,
    All the best,
    Santosh

  • Course Appraisal Extraction in HCM

    Hi,
    I am trying to extract course appraisals from my ECC 5.0 / HCM (I think it's 2.0 EA-HR is SAPKGPHC15) / LSOFE 300 system, into my BI 3.5.3 system but can't.  I can pull the Personnel Appraisals at will using the standard business content extractors however, the Course Appraisals (Object Types E and ET) are not extracted, only object type P's are extracted.
    If I run program RHHAP_DISPLAY_DB, I see my course appraisals in tables HRHAP and HRHAP_BASIC alongside my personnel appraisals, but it looks like the course appraisals are being filtered out by the template for some reason.
    Is the standard extractor set for HCM (0HAP_DOC_ID_ATTR, 0HR_PA_HAP_1, 0HR_PA_HAP_2 and 0HR_PA_HAP_3) incompatible with Course Appraisals for LSO, do they only deliver PA content or can we select which one?
    If I run the text based extractor, 0HAP_DOC_ID_TEXT, I receive all appraisal texts (object types E, ET and P)!  So, this extractor is not filtered, but the others are.
    Thank you,
    Brian

    Hi Brian,
             I am facing the same problem(for extracting Course Appraisal) like you.I am wondering could you able to find the solution for this problem.
    Could you give some idea to solve this problem?
    I will be thankful to you if you share the solution.
    Thanks for your time.
    Regards,
    Raja

  • Error in Course appraisal done by LSO_PSV1

    Hi,
    I tried to execute the Course appraisal from LSO_PSV1 but when selection the Person that has to evaluate the Course, then selected Participation --> Appraisal --> create.
    I selected the Appraisal template (new template VA) and I got the following error:
    Appraisee person "..." not allowed.
    The object P is between the Appraiser types for object E Course in PHAP_CATALOG, Tab Participants of Category group "SAP Learning Solution".
    do you know why the error appears?
    thanks
    Barbara

    Hi Brian,
             I am facing the same problem(for extracting Course Appraisal) like you.I am wondering could you able to find the solution for this problem.
    Could you give some idea to solve this problem?
    I will be thankful to you if you share the solution.
    Thanks for your time.
    Regards,
    Raja

  • LSO : Course Appraisal Issue

    Hi All,
    Please let me know whether its mandatory for  Training Administrator to create Appraisal Document for each participant for the course manually or is there any way out to automatically create the document for all partipant of the course.
    A quick reply will be appreaciated.
    Regards,
    Deb
    Edited by: Debdarshan Panda on Dec 17, 2008 9:44 AM

    Hi Debdarshan,
    Did you ever get an answer on this one? Or are you using a manual process`?
    We're looking into the same issue at the moment
    Best regards
    Jakob

  • Course appraisals in LSO not shown in Portal ?

    hi,
    we are using learning solution LSO 600, backend-system ERP 2005 (ECC 6.0). I have created course appraisals in the customizing.
    now i have the problem that there is no link in the portal. i can book courses, cancel them, show the training catalogue, etc....etc.....
    but where do i have a link to the course-appraisals-web-application ???
    best regards, Martin

    Hi Martin,
    In order to make the connection between the course and the appraisal, you want to create a relationship A/B 608 (IT1001) between the course type (object D) and the appraisal template (object VA).
    What I have done is to configure all the relevant actions for course type creation (e.g. Actions D, DETE, DETR, etc.) to show this relationship so that my training administrators can choose to link an appraisal template to a course during the course creation process.
    Hope that helps.
    Regards,
    Gary

  • Appraisal in LSO - Attendee & Trainer

    Dear Experts,
    We are implementing ESS and LSO BSP page is activated in this customer place. Prebooking and Participation and its subsequent cancellations are working fine as desired. But we are not able to do the appraisal for a course by the attendee and the trainer. We have activated the HAP document and it shows the document_todo, document_recevied & document_created. But all these forms are showing empty pages. Can anyone help us how to show the template to the attendee & trainer.
    Thanks in Advance.
    Regards,
    Michael Jude

    Hi Michael,
    Please check this link http://help.sap.com/erp2005_ehp_03/helpdata/en/d9/766b3c8d6fd66ce10000000a11402f/content.htm .
    This will help you get the solution.
    Regards,
    JwaliniS

  • Create a course appraisal template

    Hello,  We are trying to leverage page documents_todo.htm from service 'HAP_DOCUMENT' for LSO course appraisals.  It's working except we don't want learners to create their own appraisals - we want the page prepopulated with valid appraisals based on course attendance and completion.  I've been looking at other messages on SDN and it looks like we want to do the following:
    1.  Get list of Appraisers for the course
    -Use BADI HRHAP00_TMPL_608
    -Add implementation to an enhancement area in transaction OOHAP_BASIC (I'm not sure which one, though as neither HA or D1 worked for me.)
    -Add the implementation to our category for our lso appraisal
    -Add it to our template for "further template behavior"
    2.  Create the documents (phap_prepare doesn't seem to work - I think because the appraisee is not a P?)
    - Use FM HRHAP_TEMPLATE_GET_DETAIL
    - Save the document HRHAP_DOCUMENT_SAVE
    - Unlock it HRHAP_DOCUMENT_DEQUEUE (why would we do this?)
    Then my hope is it would appear on the page. 
    Does anyone have any thoughts?  Am I totally off base? 
    Thanks so much for your help.
    Best regards,
    Sharon

    Hi Sharon!
    I am required to implement Course and Instructor appraisals in my current LSO project. I am pretty new to this. Is there any document or online resources you are aware of which could be helpful to get more knowledge about this.
    Thanks in Advance.
    BTW if I am not wrong you attended the LSO Enhancement Pack 4 session on 5th Dec. The one in which Prashanth presented. I vaguely remember seeing your name.
    Regards,
    Ravi Sekhar

  • Objective setting appraisal (OSA) queries related to ESS/MSS

    Hello All,
    I am currently working in OSA. I have few queries related to this.
    My client wants to implement OSA without linking it to the SAP ESS/MSS. They have their own intranet portal which is not a part of SAP. But they are using it for applying leave etc which has been linked to SAP R/3. So they also want to use the the same portal for appraisal also. 
    Hence my query is whether is it possible to link OSA with their own inhouse intranet portal ? And if it is possible then how and will I be able to get all those functionalites which are available in standard ESS/MSS for OSA?
    Please guide.
    Regards,
    Daniel

    Hi Daniel
    If you can call SAP Portal in your local intrenet.
    In one of my clients they were using MOSS as thier frame work (SAP portal is called inside moss)
    Thanks
    Rajdeep

  • How to change defauled field value in Appraisal OSA

    Hi,
    We hav implemented OSA Appraisal Model and it's working fine both in R/3 and from EP.In form template We hav set the column 'Value Input' to Required Entry.
    In the HAP Document the field values of that column are never null coz the field value is defaulted to the first entry '1'. How to change the defaulted value in the drop dwn boxes.
    Any help will be much appreciated .
    Rgds,
    Jothi.
    Message was edited by: Jothivenkatachalam.P

    Hello Jothi,
    Defaulting can be achieved with a value determination, BAdI definition HRHAP00_VAL_DET.
    Regards and Groetjes,
    Maurice

  • Course catalog problem - LSO

    Hi All,
    We are facing strange problem in LSO in displaying the course catalog properly for all users.
    We are using mySAPERP 2005 (ECC 6.0) SP11. LSO 600 FE,
    We are using structural authorization profiles in the R/3. The catalog was displaying the catalog properly before 2 days back.
    Now, for some reasons few of the users having the problems in accessing the course catalog (catalog doesn't show most of course groups, course type, and course).
    It skips some of the course groups, course types, and course.
    Anybody has an idea what is the problem ? Appreciate your help in this regards.
    Note : I correctly maitained the catalog in R/3 by choosing/checking subject area infotype for every topmost course groups.
    Looking forward to your responses.
    Regards,
    Anil Kumar

    Hi Markus,
    Thank you very much for your reply. Figured out the problem, as you said the subject area inoftype flag is not being checked.
    But, to my strange I am not able to figure it out why it has happened ?
    Why the flag is being removed automatically even though I have done these settings and saved it properly in production server 1 month back ?
    This happened in quality server too, for initial 15 days, it was shown properly and then....the same problem has started with the course catalog in quality server also ?
    Why this kind of inconsistent behaviour ?
    Is it the problem with any of TR's movements to Qual, and then to production server ?
    Also, we have maintained the structural authorizations correctly in oosb and oosp tcode of backend ECC.
    Please share your experiences.
    Thanks for your time,
    Anil Kumar

  • WD ABAP -OSA- LSO integration

    Hi All,
    We have implemented EHP4 - WD ABAP based appraisals , we have used free enhancement  -HRHAP00_ENHANCE_FR11 to get the courses from LSO ( integration) .
    Through this badi we are able to see and add all the courses under lso , we have a requirement to restrict some courses which are maked " X" in table HRP1029 this infotype belongs to LSO.
    Please share your ideas on this, is this badi linked to - HAP_DOCUMENT_BODY- component -IF_HAP_LSO_COURSES_SEARCH ?
    Thanks
    Kumar

    I'm not sure this is really a web dynpro abap question.  Using the Portal APIs, Web Dynpro ABAP can trigger navigation to any navigation target configured in the Portal.  Reading your question, I get the impression that you want to know how to setup a navigation target in the portal for a specific CRMUI application point.  This seems more like a CRMUI or Portal question.

  • Appraisal OSA issue

    Hi experts,
    Im working on OSA Appraisals and using BSP Application HAP_DOCUMENT. we want to do some validations in the header portion. For example, if user is not authorized to create appraisal for a particular date(based on his join date), we need to inform him a message in a popup window.I know about the BADI <b>HRHAP00_DOC_DEF_DV</b>.But i want to display the <b>popup</b> when the user clicks the SAVE button.Could anyone tell me the way to control it? Can it controlled from front end(BSP)? if so, which page i hav to write the code ?
    Thanks in Advance,
    Jothi.P

    I want a popup window similar to the window appearing, when trying to create more than one Appraisal in a same period.
    Rgds,
    Jothi.P

  • Course catalog authorization(LSO)

    Hi,,
    New authorization required  for E-learning in portal,
    Based on course catalog authorization should provided to users  like specific course catalog should be display for particular  usersin portal .     how to restrict .
    Regards
    Santosh

    Hi Santhosh
    You must use Structural Authorizations to meet this requirement.
    Best Regards
    Reddy

Maybe you are looking for