Course appraisals in LSO not shown in Portal ?

hi,
we are using learning solution LSO 600, backend-system ERP 2005 (ECC 6.0). I have created course appraisals in the customizing.
now i have the problem that there is no link in the portal. i can book courses, cancel them, show the training catalogue, etc....etc.....
but where do i have a link to the course-appraisals-web-application ???
best regards, Martin

Hi Martin,
In order to make the connection between the course and the appraisal, you want to create a relationship A/B 608 (IT1001) between the course type (object D) and the appraisal template (object VA).
What I have done is to configure all the relevant actions for course type creation (e.g. Actions D, DETE, DETR, etc.) to show this relationship so that my training administrators can choose to link an appraisal template to a course during the course creation process.
Hope that helps.
Regards,
Gary

Similar Messages

BI Administrator cockpit queries not shown in portal

Hi All,
We have a same problem as mentioned in thread BI Administration Cockpit - Queries not shown in portal but i didn't understand the solution.can somebody tell me the solution
Thanks
Bala Duvvuri

Note 972514 resolved the issue
Thanks
Bala Duvvuri

Table created in visual studio not shown in portal

i created a table in vs2013 for my azure sql database.
the update completed successfully so the new table must be up there somewhere,
but when i go to the portal, it is not shown.
why?

Hi,
Based on your description, you have seen the database update has been completed successfully from data tool operations, as far as I know, it means that your azure sql database has been updated, and the table you created must exist in azure portal,
I tried on my side, everything worked as except, please check your azure sql connection, and clean cookies and sessions, then open azure sql management portal again.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Selected pictogram for workset not shown in portal

Hi Gurus,
i have created a workset in portal and there is a setting that i can select a pictogram for this workset. If i select a pictogramm and save the workset the selected pictogram is not used in portal. I still see the old pictogram.
I have uploaded a screenshot:
http://img352.imageshack.us/my.php?image=pictogramvv4.jpg
Regards,
Adem

Hi Bala,
i looked into the settings. All cache not active. I have activated them.
As the caches was not enabled the problem could be something defferent?
Regards,
Adem

Optional variables within report not shown on portal

Hello,
I have got following phenomenon:
I created a report with the Report Designer. This report contains different queries that all use the same optional variable. Our first tries showed the selection screen for this variable within the portal.
After we changed the technical name and the description and published it into portal again the selection for the optioanl variable isn't shown anymore.
It's no general problem because on queries for example the optional variables are shown.
Has anybody an idea what could be the problem and how we can solve it?
Greetings & thanks
Bettina

Hello,
if I execute the report within the Report Designer there occurs a drop down menu on the variable screen "Available variants:" with on item "Report with variable".
I can save this variant - but it's not possible to choose this special variant for publishing into portal (ok, maybe it works but my first tries didn't work). Do you have an idea how this setting can be used in portal??
Greetings & thanks
Bettina

BI Administration Cockpit - Queries not shown in portal

Hi,
Has anyone experienced the following problem:
- The BI Admin. Cockpit has been installed according to instructions without errors
- The technical content as well as the process chains are working and data is being collected from the objects pointed in RSDDSTAT
- The Business Pacakge "BI Administration 1.0" has been installed.
- Both roles (BI Admin. & System Admin.) have been assigned in portal and BI Admin -role has been assigned to user in SSM.
- The BI Admin. tab page is visible in portal and all of the IViews and pages are available in the portal content.
- If the queries or the templates are executed from BEx or WAD they are populated with data and everything is working as it should be.
- Even when executing the IViews or pages (f.ex. No. of BI Application Executions per User) in PREVIEW -mode from Portal Content Studio the reports are shown correctly.
HOWEVER: If one navigates to BI-Admin tab --> BI Usage Statistics --> BI Application Usage Statistics -report, both of the expected reports are just missing. The only things that are shown are the templates (tab strip and buttons) but the queries are missing.
There are no error messages etc. Please advice how to proceed with further investigations?
-Miikka

It's exactly my issue at the moment.
Hi Miikka.
You wrote: "Both roles (BI Admin. & System Admin.) have been assigned in portal and BI Admin -role has been assigned to user in SSM." and afterwards you wrote, the solution was "to being activate them"
My questions:
1.) Sorry, but what means "SSM"?
2.) As I red in the help, it's not needed to assign the BI-Admin to the role "System Admin" when you assign the role SAP_BW_BI_ADMINISTRATOR to the User and additionally set the feature "Accessability" within the role.
Does it only work with assigning the role "System Admin" as well ?
3.) What does ist means, "to being activate them"? There's no Activation forseen after assigning the roles to the Users. So what do you mean ?
Thanks,
Thomas

Salary statement not shown in portal

Hi,
     I am facing 1 problem in salary statement display in ess. But its showing the blank adobe form,only employee id is shown.When i click on show overview,it shows this error.
Internal error in Salary Statement service: PYXX_READ_PAYROLL_RESULT 00001916 00012
com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Internal error in Salary Statement service: PYXX_READ_PAYROLL_RESULT 00001916 00012
     at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:112)
     at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:122)
     at com.sap.xss.hr.rep.fcrfw.FcRepFramework.reportBapiRet2Error(FcRepFramework.java:525)
     at com.sap.xss.hr.rep.fcrfw.FcRepFramework.callRfcExecAction(FcRepFramework.java:374)
     at com.sap.xss.hr.rep.fcrfw.FcRepFramework.execAction(FcRepFramework.java:302)
     at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFramework.execAction(InternalFcRepFramework.java:260)
     at com.sap.xss.hr.rep.fcrfw.FcRepFrameworkInterface.execAction(FcRepFrameworkInterface.java:146)
     at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFrameworkInterface.execAction
regards
Sumit
Edited by: Sumit Malhotra on Apr 13, 2010 1:27 PM

Hi Sumit,
have a look in transaction ST22 in the backend - you may be able to get more info about why the FM failed.
I'd suggest it is probably a data error of some kind - but the short dump should give you some more details.
Let us know if you do find any further details,
Cheers,
Chris

Correct status pf workflow not shown in Portal

When a workflow gets executed , it is always showing in the PCR as approval required . How can we pass the correct status

[Check this SAP help Document|http://help.sap.com/erp2005_ehp_04/helpdata/EN/34/a8cc439937439081aa4db618a3e8ea/frameset.htm]

Appraisals - Pushbuttons not working in portal

Hi
I am facing a strange problem. I have configured some custom pushbuttons with previous status and next status combination. I used them in a template. The pushbuttons are coming correctly in R/3 but they are not visible in portal. What could be the problem?
Regards
FS

working in R/3, does that mean the pushbuttons are working phap_admin ?
It's possible your pushbutton statuses do not have the correct "person authorized", this would indicate based on the role logged in on the portal, appraisee or appraiser they may not have access to see that button, but in PHAP_ADMIN it would work.
Check the "Person Authorized" settings on the status flow tab.
let me know after this, if still there.

Course Appraisals

Hi Folks,
I am working on LSO Course appraisals we have configured a template separately as a category along with OSA in the same category group. Could any one please let me know is this course appraisals used for both class room and online courses??
When the form will be diplayed in the portal ?
Do we need to include course or course type in the template i meam appraisee type ???
Thanks in advance
Thanks
VK

Hi Chetan,
Thanks for the response. I have created the course appraisal templae including the object type -p and coures.
I can able to create the appraisal document using appcreate transaction and i do not have any problem at the template level and not facing any authorization issues.
My issue is we are using both OSA and course appraisal ,we set the main swithc as "A". When i tried to open the template using tcode lso_pv34 under participant appraisal i was able to create app documents.
When i try to create the template using pv33 iam getting no templet found message, i defined forms of appraisals also and kept the course appraisal switch empty.
Please let me know how the pv33 tcode will work ,i want to perform the course appraisal .
Thnaks
VK

Creating Course Appraisals for I-view

I have a custom developed i-view, where I want to have the course appraisals associated with participants to show in. I.e. once a appraisal is available in the Learning Portal (Perform Course Appraisal) it should also be available in the I-view, the idea is then to create a workflow with a link to this I-view, instead of linking to the BSP (as this doesn't work, due to a deep link problem).
My problem is then, it seems the course appraisal documents aren't created before the link is activated (not sure how the data lies, but it seems the form is created upon clicking the link), that means that nothing will flow to the i-view before the link is activated.
Do anoyone know have to "force" creation of these Appraisal Forms so they are available in the i-view even if the link isn't activated?
You help highly apprieciated
Jakob

Hi,
Like you said, the document is only created once the link is clicked. And without modification you cant influence it.
What you could do is use this behaviour. Hide the appraisal part on the BSP, and on your custom Iview just replicate the logic used by the learning solution.
Check if the course is completed , when yes create the appraisal document and show it in your own iview. LSO uses
FM LSO_EVALUATION_GET_URL_CREATE to do the checks and create the appraisal url.
Regards and Groetjes,
Maurice Hagen

WEBGUI is not working in portal

Hi
I had conected to production server and created Transactional Iview with SAPGUI for WINDOWS and running it successfully.
My aim is to make use of SAPGUI for HTML in the place of SAPGUI for WINDOWS.
So i had activated ITS services successfully and the URL is working fine.As i am using integrated ITS i checked with the fallowing URL.
http://server:port/sap/bc/gui/sap/its/webgui
It had shown the screen of SAP WEB Application Server with portal SID and asking for credentials. after proving the credentials its showing SAP screen successfully.
Now i had changed SAPGUI for HTML in transactional IVew and getting the same screen succesfully. as it ask for SAP user Id pwd. i had entered the same credentials wat i had entred earlier during the test. Now its showing an error like
<b>Client, name, or password is not correct; log on again .</b>
what could be the problem ?why its not working in portal while working fine with URL ?
Please guide me .

Hi
U Need to enable SAPGUi for html
goto se80 give internet services (in the drop down box)
Below drop down give SYSTEM publish these service by right clicking system publish--complete service.
and also publish same way WEBGUI
Check SAP Note 698329
Hope this helps you.
Regards
Krishna.

How to deactivate the rosetta option if it is not shown in information page

Hi,
by accident or why ever I clicked the option "start with rosetta" on my eyetv.app. STRANGE now the option is no longer viewable in information field and I can't start the application inside of the application folder because I get then the message "EyeTV can't run under Rosetta-Emulation" please deactivate the Option via Menu Ablage and unmark the option. BUT I can't see this option in information field. AND if i try to start the eyetv.app in an folder outside of applications it works.
Anyone an idea

Hi,
thank you for the hint with command+i BUT THIS DOES NOT help of course, because I already wrote that I used this.
I solved it now in different way which leads to a general question that somewhere the osx seems to note versions of programs and how to open them.
Description of this issue now in detail:
- I installed EyeTV in Version 3.0 on OSX 10.6 and started it.
- a message appears that this program is not made for this OSX version (it was made for 10.5)
- stupidly Elgato has no direct access to update from 3.0 to 3.1.2 which works with 10.6 WHICH means EyeTV has a buildin update BUT is useless if you can't start this app
- OK this leads me to idea to enable the "Start with Rosetta option"
- Didn't work
- I took then an 3.1.2 Version from my TimeMachine Backup and copied it over the old ones
- tried to start it and the message appear "This cannot run in Rosetta Mode"
- HERE IT COMES the little option field where you can disable or enable Rosetta in the information of the eyetv 3.1.2 is not shown so I was unable to disable it of course
- so i copied the file to a different directory and it works there normally
- ..... AFTER 2 hours i remembered that I had set the "Start with Rosetta" option on version 3.0 and the Snow Leopard seems to have noted this somewhere and i need a trick to see this option and the only way is to use a version 3.0 file maybe the option will appear there again
- ok copied Version 3.0 over the 3.1.2
- AND AH the rosetta option appears and was enabled and I had here the possibility to disable or unmark it
- then copy back the 3.1.2 Eyetv version file and AH it runs
So imagine that someone else uses today an application which really needs rosetta, and a user activates this and after some month a Snow Leopard 64bit version comes and nobody tells the user to deactivate the rosetta version on old package before installing new one.... poor user, I guess the 64bit version will tell the crap "This application can't run under rosetta" and the user will never find the way to disable it.
Hope there is a better way to find out for which application in which version was set the "start with rosetta" option in the system.
IF ANYONE KNOWS PLEASE let me know

Extra-ordinary depreciation is not shown on the Asset History Sheet

Hi,
When doing a disposal of assets via transaction ABAVN, the extra-ordinary depreciation is not shown on the asset history sheet in the "Deprec for the year" column.
How can I show it on the asset history sheet?
Thank you for your feedback.
Kind regards,
Linda

Hi,
of course it can. The Asset History sheet output can be defined absolute flexible. Good source of information of how to define asset history sheet versions can be found in the SDN Wiki articles [Asset History Sheet (Detail) |https://wiki.sdn.sap.com/wiki/display/ERPFI/AssetHistorySheet%28Detail%29] and [Asset History Sheet |https://wiki.sdn.sap.com/wiki/display/ERPFI/AssetHistory+Sheet].
Feel free to create your own history sheet versions according to your needs. But you should avoid to change standard delivered history sheet versions.
Regards,
Markus

Ipod classic not shown in itunes

I have recently been having A LOT of problems with my 3 month old 80gb ipod classic. i used to get the (-48) error and then i started to get the (-69) error. i tried some suggestions and nothing seemed to be working and then earlier this week i got the (-50) error. i used the link that is supplied on this board to solve it, but it only made things worse! now when i plug my ipod in, nothing shows up in itunes although it shows that my ipod is plugged in in My Computer. Also, i have read that i should go to Disk Manager in the control panel, but my ipod is not shown there like i am told it should be. someone please help me, I'm going crazy!!

I'm very disappointed with this problem, which I had also. Suddenly, I couldn't sync my ipod u2 special edition with the provided firewire cable. The ipod just wasn't shown in itunes. Happily, my wife have a newer ipod with was shipped with an usb sync cable. So now I have to sync my ipod with the usb cable, just because Apple decided to leave old ipod owners without sync capabilities. Ah, of course, if you don't want to buy a new cable....very disappointing.
This strategies reminds me of the times were Steve Jobs wasn't in the company and I had to go for a Windows machine because buying an old RAM memory was simply impossible. Don't do it again, please, don't leave old mac users at the side of the road.

Course appraisals in LSO not shown in Portal ?

Similar Messages

Maybe you are looking for