Course catalog problem - LSO

Hi All,
We are facing strange problem in LSO in displaying the course catalog properly for all users.
We are using mySAPERP 2005 (ECC 6.0) SP11. LSO 600 FE,
We are using structural authorization profiles in the R/3. The catalog was displaying the catalog properly before 2 days back.
Now, for some reasons few of the users having the problems in accessing the course catalog (catalog doesn't show most of course groups, course type, and course).
It skips some of the course groups, course types, and course.
Anybody has an idea what is the problem ? Appreciate your help in this regards.
Note : I correctly maitained the catalog in R/3 by choosing/checking subject area infotype for every topmost course groups.
Looking forward to your responses.
Regards,
Anil Kumar

Hi Markus,
Thank you very much for your reply. Figured out the problem, as you said the subject area inoftype flag is not being checked.
But, to my strange I am not able to figure it out why it has happened ?
Why the flag is being removed automatically even though I have done these settings and saved it properly in production server 1 month back ?
This happened in quality server too, for initial 15 days, it was shown properly and then....the same problem has started with the course catalog in quality server also ?
Why this kind of inconsistent behaviour ?
Is it the problem with any of TR's movements to Qual, and then to production server ?
Also, we have maintained the structural authorizations correctly in oosb and oosp tcode of backend ECC.
Please share your experiences.
Thanks for your time,
Anil Kumar

Similar Messages

  • Course catalog authorization(LSO)

    Hi,,
    New authorization required  for E-learning in portal,
    Based on course catalog authorization should provided to users  like specific course catalog should be display for particular  usersin portal .     how to restrict .
    Regards
    Santosh

    Hi Santhosh
    You must use Structural Authorizations to meet this requirement.
    Best Regards
    Reddy

  • LSO 600 Course Catalog with R3 4.7

    HI toeveryone,
    I wanted to know can we replace LSO 6.00 Course Catolog with LSO 2.00 Course catalog.
    we are on portal 6.0 and backend is 4.7.
    Thanks,
    Vinay

    Hi Vinay,
    No, We can't use the LSO 6.00 with LSO 2.0 course catalog.
    You need to upgrade the SAP version to ECC 6.0 to achive the required.
    LSO 6.0 is part of ECC 6.0 EAHR component which is not available in R/3 4.7 .
    Thanks.
    Amith

  • Prob in configuring Course Catalog

    Dear we have a problem...
    we are setting up  a new server, I have setup up Academic Institute, Subject, Organization, Group, Location and every thing.
    But when we are going to create Course Catalog in Curriculum Mgmt, Its "Offering" page is not showing me list of "Organizations"
    Do not we have to setup tree manger
    when we select subject the the Organization should load auto, is there any problem or  other configuration or how academic organization bind with subject.
    so please guide me

    1�� download RTL8139 driver for SOLARIS8 X86 from http://www.realtek.com.tw��
    2�� gunzip filename
    3�� # . ./INSTALL
    4�� # touch /etc/hostname.rtls0
    5�� # touch /reconfigure
    6�� # shutdown -i5 -g0 -y
    after reboot machine
    7�� $ ifconfig -a
    you can get your NIC info
    8�� to set network, type command # sys-unconfig
    it will re-configure your system.

  • Transporting Course Catalog from one client to another

    Hi Experts,
    Can we transport LSO Course Catalog from one client to another or from development server to QA Server? If yes please somebody help me how to do that? Appreciate your efforts. Thanks
    Regards,
    FS

    Hi,
    You may use report RHMOVE30 and try creating a transport request manually.
    Use object type as course group (L) and type all of the course group numbers as object id.
    Then select evaluation path as L-D.
    Please try.
    Another option is to create an LSMW for creation of the course groups and types and the relationships between them.
    Regards,
    Dilek

  • SAP Learning Solutions - Course Catalog Plan Versions

    Hi
    I am new to this community and not quite sure how it works.
    We are going to implement SAP Learning Solutions in the near future and within our company we have a division that wishes to store and track learning.  The main division will be using the active course catalog and doesn't want the other division's data mixed.  Also there is an issue with security that we need to deal with.
    My question is - Can I use a different version to store the smaller divisions information?  In dev I can see courses attached to the other version and I am able to add participants, but none of the reporting displays a participant list.
    Is this the best way to solve the situation or is there another way?
    I would appreciate any help with this.
    Thanks
    Karen

    Hi crystaltan,
    did u tried to use curriculum or trainingsprogramm? Maybe u can solve ur Problem this way.

  • Organizer/catalog problem

    getting: "a problem accessing Organizer catalog. It may be in use by another process or a disk error occurred".  Can you help? Sorry - I'm using Elements 5...

    From: photodrawken
      Sent: Thursday, May 17, 2012 2:39 PM
      To: Ermineglen
      Subject: Organizer/catalog problem
            Re: Organizer/catalog problem
            created by photodrawken in Photoshop Elements - View the full discussion Much thanks to you - appreciate it. Glen...

  • Learning solution Course catalog not available on portal

    Hello Experts,
    I have created Course Catalog on R/3, when I try to access it on portal it doesn't show me any course groups except unassigned course types. But while testing HCM_LEARNING (BSP Application) it does show me all the course groups and even allow me to book course for training.
    Can somebody tell me what configuration I may be missing, Your help in this regard will be highly appreciated with forum points. Thanks alot.
    Regards,
    FG
    Edited by: faizghani on Mar 22, 2010 3:04 PM

    Hi FG,
    Please goto t-code PP01 - (or lso_psv1) and check "Subject area" flag in infotype "Course group info" - 1063 to be selected for the relevant course groups (object type L).
    If the issue persists please check the newly published SAP Note 1441984.
    Regards,
    Dilek
    Edited by: Dilek Ersoz Adak on Mar 22, 2010 3:06 PM

  • MSS Manage Participants Course Catalog

    Hello All,
    I was wondering if there was a way to limit the available course groups shown in the Course Catalog in the Manage Participants application (Employee Course Assignment).
    Thanks for any and all help,
    Mike

    Otherwise you might want to try limiting the course catalog using structural authorizations.
    Kr,
    Julien

  • Lightroom Corrupt Catalog problems- Help!

    Lightroom Corrupt Catalog problems reading/writing from disk when attempting to repair - Help!  I have my LR box in hand and my product keys and license info but can't find the disk. I'm assuming this is the only way to repair.  Suggestions, Comments are welcome and appreciated.
    Thanks in advance!!!

    Corrupt catalog will not be fixed by re-installing the Lightroom software (although if I were you, I'd still find that disk!)
    If I were you, I would first check a recent backup of your catalog file, and see if that will open (double-click on it in your operating system). If that opens properly, I would just use that file.
    If it doesn't open properly, then one trick that sometimes works is to open a blank catalog in Lightroom, then File->Import from Another Catalog and point to the catalog file.
    And if that doesn't work, please write back with a lot more details, including operating system, version of Lightroom, and much more detail abou

  • Course appraisals in LSO not shown in Portal ?

    hi,
    we are using learning solution LSO 600, backend-system ERP 2005 (ECC 6.0). I have created course appraisals in the customizing.
    now i have the problem that there is no link in the portal. i can book courses, cancel them, show the training catalogue, etc....etc.....
    but where do i have a link to the course-appraisals-web-application ???
    best regards, Martin

    Hi Martin,
    In order to make the connection between the course and the appraisal, you want to create a relationship A/B 608 (IT1001) between the course type (object D) and the appraisal template (object VA).
    What I have done is to configure all the relevant actions for course type creation (e.g. Actions D, DETE, DETR, etc.) to show this relationship so that my training administrators can choose to link an appraisal template to a course during the course creation process.
    Hope that helps.
    Regards,
    Gary

  • Global catalog problem

    hello everyone
    in our company we are upgrading our DCs to server 2012R2 we have one Dc 2008R2 we installed another DC 2012R2 and make it GC from sites and services the problem appeared when I demoted the 2008 server I noticed that nobody in the company is able to log to
    the domain I realized that even the global catalog check mark is checked the server is not global catalog when I connect through ldap I see isglobalcatalogready : false I tried many solution to make it global catalaog but no success my solution was to shut
    down this server and restore the 2008 server from a previous backup now all the users can log to the domain but I only have one DC I tried to add another 2012R2 Dc but DCPromo fails on the prerequisite "check verification of outbound replication
    failed error reading the ntds settings on replication source controller" I installed another server 2008R2 server since there is no prerequisite check but the same problem occured the new DC is marked as GC but it's not GC I checked port 3268 I ran dcidag
    and this is the result
    dcdiag /test:checksecurityerror
    Directory Server Diagnosis
    Performing initial setup:
    Trying to find home server...
    Home Server = 2k8DC
    * Identified AD Forest.
    Done gathering initial info.
    Doing initial required tests
    Testing server: mysite\2K8DC
    Starting test: Connectivity
    ......................... 2K8DC passed test Connectivity
    Doing primary tests
    Testing server: mysite\2K8DC
    Starting test: CheckSecurityError
    The account 2K8DC is not a DC account. It cannot replicate.
    Unable to verify the machine account
    (CN=2K8DC,OU=Domain Controllers,DC=mydomain,DC=local) for 2K8DC on
    2K8DC.
    Source DC WIN-SM5GUTCII7H has possible security error (8453).
    Diagnosing...
    Error 2184 querying time on DC WIN-SM5GUTCII7H. Ignoring this
    DC and continuing...
    * Missing SPN
    :LDAP/WIN-SM5GUTCII7H.@missing_dnsHostName@/mydomain.local
    * Missing SPN :LDAP/WIN-SM5GUTCII7H.@missing_dnsHostName@
    * Missing SPN :LDAP/WIN-SM5GUTCII7H
    * Missing SPN
    :LDAP/WIN-SM5GUTCII7H.@missing_dnsHostName@/mydomain
    * Missing SPN
    :LDAP/f67b0f34-07ae-4dec-8ff5-7cd284ecb7b8._msdcs.mydomain.local
    * Missing SPN
    :HOST/WIN-SM5GUTCII7H.@missing_dnsHostName@/mydomain.local
    * Missing SPN :HOST/WIN-SM5GUTCII7H.@missing_dnsHostName@
    * Missing SPN
    :HOST/WIN-SM5GUTCII7H.@missing_dnsHostName@/mydomain
    * Missing SPN
    :GC/WIN-SM5GUTCII7H.@missing_dnsHostName@/mydomain.local
    Unable to verify the machine account
    (CN=WIN-SM5GUTCII7H,OU=Domain Controllers,DC=mydomain,DC=local)
    for WIN-SM5GUTCII7H on 2K8DC.
    Unable to connect to the NETLOGON share!
    (\\WIN-SM5GUTCII7H\netlogon)
    [WIN-SM5GUTCII7H] An net use or LsaPolicy operation failed with
    error 67, The network name cannot be found..
    [WIN-SM5GUTCII7H] Unable to verify logon privileges on DC
    shares. Please check the above output and take appropriate
    steps.
    Failed to read object metadata on WIN-SM5GUTCII7H, error
    Directory object not found.
    [WIN-SM5GUTCII7H] Unable to diagnose problem for this source.
    See any errors reported in attempting tests.
    ......................... 2K8DC failed test CheckSecurityError
    Running partition tests on : ForestDnsZones
    Running partition tests on : DomainDnsZones
    Running partition tests on : Schema
    Running partition tests on : Configuration
    Running partition tests on : mydomain
    Running enterprise tests on : mydomain.local
    C:\Users\Administrator>dcdiag /test:checksecurityerror
    Directory Server Diagnosis
    Performing initial setup:
    Trying to find home server...
    Home Server = 2k8DC
    * Identified AD Forest.
    Done gathering initial info.
    Doing initial required tests
    Testing server: mysite\2K8DC
    Starting test: Connectivity
    ......................... 2K8DC passed test Connectivity
    Doing primary tests
    Testing server: mysite\2K8DC
    Starting test: CheckSecurityError
    The account 2K8DC is not a DC account. It cannot replicate.
    Unable to verify the machine account
    (CN=2K8DC,OU=Domain Controllers,DC=mydomain,DC=local) for 2K8DC on
    2K8DC.
    Source DC WIN-SM5GUTCII7H has possible security error (8453).
    Diagnosing...
    Error 2184 querying time on DC WIN-SM5GUTCII7H. Ignoring this
    DC and continuing...
    * Missing SPN
    :LDAP/WIN-SM5GUTCII7H.@missing_dnsHostName@/mydomain.local
    * Missing SPN :LDAP/WIN-SM5GUTCII7H.@missing_dnsHostName@
    * Missing SPN :LDAP/WIN-SM5GUTCII7H
    * Missing SPN
    :LDAP/WIN-SM5GUTCII7H.@missing_dnsHostName@/mydomain
    * Missing SPN
    :LDAP/f67b0f34-07ae-4dec-8ff5-7cd284ecb7b8._msdcs.mydomain.local
    * Missing SPN
    :HOST/WIN-SM5GUTCII7H.@missing_dnsHostName@/mydomain.local
    * Missing SPN :HOST/WIN-SM5GUTCII7H.@missing_dnsHostName@
    * Missing SPN
    :HOST/WIN-SM5GUTCII7H.@missing_dnsHostName@/mydomain
    * Missing SPN
    :GC/WIN-SM5GUTCII7H.@missing_dnsHostName@/mydomain.local
    Unable to verify the machine account
    (CN=WIN-SM5GUTCII7H,OU=Domain Controllers,DC=mydomain,DC=local)
    for WIN-SM5GUTCII7H on 2K8DC.
    Unable to connect to the NETLOGON share!
    (\\WIN-SM5GUTCII7H\netlogon)
    [WIN-SM5GUTCII7H] An net use or LsaPolicy operation failed with
    error 67, The network name cannot be found..
    [WIN-SM5GUTCII7H] Unable to verify logon privileges on DC
    shares. Please check the above output and take appropriate
    steps.
    Failed to read object metadata on WIN-SM5GUTCII7H, error
    Directory object not found.
    [WIN-SM5GUTCII7H] Unable to diagnose problem for this source.
    See any errors reported in attempting tests.
    Authoritative attribute pwdLastSet on 2K8DC (writeable)
    usnLocalChange = 5866156
    LastOriginatingDsa = 2K8DC
    usnOriginatingChange = 5866156
    timeLastOriginatingChange = 2014-08-17 08:55:52
    VersionLastOriginatingChange = 42
    Out-of-date attribute pwdLastSet on WIN-SM5GUTCII7H (writeable)
    usnLocalChange = 12868
    LastOriginatingDsa = 22a5b57a-fac4-4cfe-9fcb-c545025d3716
    usnOriginatingChange = 5830453
    timeLastOriginatingChange = 2014-08-13 15:07:23
    VersionLastOriginatingChange = 41
    Unable to verify the convergence of this machine account
    (CN=2K8DC,OU=Domain Controllers,DC=mydomain,DC=local) on these DC's
    (DC=mydomain,DC=local,2K8DC). Does the machine account password need
    resetting?
    ......................... 2K8DC failed test CheckSecurityError
    Running partition tests on : ForestDnsZones
    Running partition tests on : DomainDnsZones
    Running partition tests on : Schema
    Running partition tests on : Configuration
    Running partition tests on : mydomain
    Running enterprise tests on : mydomain.local
    note that WIN-SM5GUTCII7H is the new DC I renamed it to server 2008R2 but it can't be a global catalog due to the error.
    I tried to google this error but I didn't find any solution how to make make it replicate the GC
    Best

    In addition, I just wanted to point out that the error you are receiving below, can be indicative of some sort of firewall block. Antivirus apps can do this, too, with their network protection features.
    "check verification of outbound replication failed error reading the ntds settings on replication source controller"
    Do you have an AV on the machine, or the Windows firewall, or a third party firewall enabled?
    Run PortQRY to see if there are any ports blocked.
    PortQry GUI -
    Run the "Domains & Trusts" option between DCs, or between DCs and any machine (other servers you want to promote, or even from a client machine), that you want to test if there are any blocked AD ports. Post only errors with "NOTLISTENING," 0x00000001,
    and 0x00000002. You can ignore UDP 389 and UDP 88 messages. If you see TCP 42 errors, that just means WINS is not running on the target server.
           PortQryUI - GUI - Version 2.0 8/2/2004
    http://www.microsoft.com/download/en/details.aspx?id=24009
    Time issue?
    A time skew between DCs that is beyond 5 minutes, can cause it, too. Are the clocks on the new server and the current DCs within 5 minutes? Is the PDC emulator configured to sync time to an outside or to a local, reliable source?
    Configuring the Windows Time Service - Complete step by step with contingency plan
    http://blogs.msmvps.com/acefekay/2014/04/26/configuring-the-windows-time-service/
    And of course we are all assuming that the new machine is definitely only using a current DC as the only DNS address in its NIC.
    Ace Fekay
    MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
    Microsoft Certified Trainer
    Microsoft MVP - Directory Services
    Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
    This posting is provided AS-IS with no warranties or guarantees and confers no rights.

  • Course Appraisal (OSA-LSO)

    Hi All,
    I have created a OSA template for Providing feedback to the courses attended my the employees...The problem is that in the Template the course field shows all the courses that are in the system instead of only the courses attended or completed by the employee....
    I have tried maintaining "Add Booked Courses" for fixed Enhancement in the, But does not help.
    Appreciate any input on the same.
    Thanks.

    Hi All,
    Can this issue be resolved in LSO by assigning the Appraisal template to the course or any other way.
    The requirement is to create a feedback template for all the courses completed by the employee in LSO.
    Awaiting your valuable inputs.
    Thanks.

  • Catalog problem LR3

    I am new to the software and cannot get images that are selected for import into catalogs to show in the center panel.

    Tomaellis wrote:
    Ok, of course I backed everything up from LR2, I've installed and have run the 3.2 RC and for the life of me I cannot remember if I did an import or not.
    Now, all my NEW photo's that I am Importing are showing in not a new Catalog but in Library imports into a new Library and now I show two.
    Hard to explain but let me try. The name of my Hard Disc is "Lightroom" The second Disc you see is where the new imports are going. My photos are all in the hard disc, not duplicated and normal.
    What I see on my left hand panel is: (with Hoboken, Jared and Sammy  being the new shoots/imports)
    LIGHTROOM
        Work Photos
        Family Photos
        Toms Photos
        Blog
    LIGHTROOM
        Hoboken Studio Shoot
         Jared
         Sammy
    Can I somehow merdge these and just have one again. I'm a bit worried. I should stay far away from RC's.....
    Thank you for any help.
    Tom
    Tomaellis,
    I'm havnig a little difficulty following where your issue is.  Is the problem related to two catalogs, or that when you open LR3 RC, you see a double entry in Library mode for the same disk drive with folders in each?
    Are the folders Work Photos, Family Photos, etc. from your older LR 2?  Did you start by converting that catalog to a LR3 one?
    As long as LIGHTROOM is a valid drive on the system, you can move the folders from the lower LIGHTROOM entries to the other one (or vice versa)
    Jay S.

  • MDM Catalog problem after SRM7 upgrade to EHP2

    Dear Experts,
    we start our project to upgrade our SRM landscape from 7.0 to EHP2. Now we are facing some problems with the MDM catalog connection. Nothing was changed in the customizing or parameters. The MDM catalog connection provided by SRM NWBC for HTML and customized as external services.
    Releases:
    MDM Server 7.1 SP8
    MDM Catalog 3.0
    Netweaver for MDM Server 7.01 SP3
    Now when we are using the link we get an Server error 500 from MDM SAP Netweaver with the following description:
    Of course we check the regarding note without any success.
    Configured links in floorplanmanager
    Any help is welcome
    Bets regards
    Markus

    The problem is solved now by SAP
    - SPRO
    - SAP Supplier Relationship Management
    - Masterdata
    - Content Management
    - external Web Services
    Select the catalog and add following entry:
    BYPASS_OUTB_HANDLER

Maybe you are looking for