Course follow up out of order, incorrect Qualification dates

Hello,
I have a situation where courses followed up out of order results in qualifications with incorrect start and end dates.
Background
- Course Type imparts Qualification. Qualification is valid until 12/31/9999.
- Course Type has 3 courses (A = 1/1/2011, B = 2/1/2011, C = 3/1/2011)
- Person enrolls in each of the 3 courses
Scenario
- Course A is followed up. Person has Qualification for 1/1/2011-12/31/9999. Correct.
- Course C is followed up. Person now has Qualification for 1/1/2011-2/28/2011 and a new record for 3/1/2011-12/31/9999. Correct.
- Course B is followed up. Person now has Qualification for 1/1/2011-1/31/2011 and 2/1/2011-12/31/9999. No new record was created. Incorrect.
There should be a qualification entry for each course attempt.
- Course A should impart Qualification for 1/1/2011-1/31/2011
- Course B should impart Qualification for 2/1/2011-2/28/2011
- Course C should impart Qualification for 3/1/2011-12/31/9999
If Course C followed up again, the qualification dates are correct, but this is a manual process (i.e. admin needs to re-follow up all the later courses in order). Is there a programmatic way to ensure the qualification dates match the course dates when followed up out of order?
Thanks,
RM

I am very interested in this thread because I have encountered a similar problem with BLOB columns, except that I am also seeing this with CLOB's.
Essentially the all the data gets 'migrated', but the CLOB and BLOB columns are all mixed up!
Any solutions?

Similar Messages

Follow up Business Event by specific qualification date.

Hi Expert,
In the follow up business event, I want to transfer qualification to attendee with the start and end date of business event. For example, the business event date is held on 07.05.2007 11.05.2007 and the qualification will be given to all attendees by t-code: PV15. By standard the start and end date of given qualification is 11.05.2007 31.12.9999. My intention is to give the date as 07.05.2007 11.05.2007 instead. Is there any solution?
Here is the background of the question. We migrated the training history record from legacy system in to SAP and stored it as qualification, and start and end date of qualification are the duration of (start/end date) of training course.
Thanks in advance,
ECTSAKC

Hi,
Sorry my English is not well. I'll tried.
Our training process like this. When any employee who has attended the training course, he/she will be given the qualification according to the particular course. The qualification should be dated the same as the duration of training course. For example, the Techinical English course is held on 07.05.2007 - 11.05.2007. When the courese is finished, the user will do the follow-up activities by using T-code PV15. By default, the start date of given qualification is 11.05.2007 and end date is 31.12.9999. But our intention is to give the start date of assigned qualification as 07.05.2007 - 11.05.2007.
There is any user exit available to do that?
Thanks.
ECTSAKC

Change screen msg following sign out on ip4. Is data retained or not? Is sign in/refresh required or not?

I did not want to upgrade yet, so I wasted time trying to post this through Bugzilla. Info s/b clear to iPhone user. Character limit prevents further detail.

Same here, happens around 5-10 times a day and is very annoying.

Expected PO Receipts and scheduled out sales orders

Hi Guys:
in MRP Net requirements Calculation,
for Example If want Consider Schedule out Sales orders( requested Delivery Date 02/02/2012) which is determined by planning horizon( 6 months 06/30/2012) , Since this sales order is within Planning Horizon it will consider for MRP Planning.
Is it the Same case with PO i.e Based upon the planning horizon PO will be included/excluded in planning?
Also if for example my PO is due from the Vendor one PO is due in 03/02/2012 and other PO is 09/15/2012?
Thanks
Kodali

Hi Venkat:
Expected PO receipts that fall within the planning horizon will be excluded or Included in the calculation?
I think it should be included otherwise you might be placing additional PO's to the vendor?
Thanks
Kodali

ITunes U courses listings out of order? Hegarty - Coding Together

Paul Hegarty's iTunes U course named "Coding Together - Apps for iPhone and iPad" lists its courses in a confusing order, it seems. (See image below). The number system is inconsistently applied and out of order, the dates are jumbled, etc.
How can I know what order to take the courses? (Believe me, I've tried to find the answer before posting this).

Vague789 wrote:
Set your track numbers correctly (by right clicking, clinking 'Get Info' and clicking on the info tab), and make sure you also set the totals (e.g. 12 of 18 - the "of 18" is what I mean by the totals). This sorted it out on my iPod.
This worked for me for my Teaching Company files. They were all jumbled previously because they took the track numbers from the default import from the internet. Once I changed it, no problem.
It would be better if Apple allowed just a dragging, or if there was a quick tool, but at least this works.
I had previously been using "Join Together" for stuff like this. I think I like this method better, though. I can still keep the individual lecture files on a playlist, but not have to worry about all the separate titles in a general listing.

Mass Qualification Transfer during LSO Course Follow Up

Dear all,
May I confirm if mass change of qualification proficiency during a course follow up is possible? I've noticed that I cannot change the proficiency value in the mass change dialog.
I am using ERP6 EHP7 Stack 04
Thanks,
Steven.

Hi Stephen, check your follow-up settings for the appropriate delivery method, via IMG: Training & Event Management > SAP Learning Solution > Recurring Activities > Follow-Up > Control of Process Steps (table V_LSOFUPROCESS) and then have a look at the appropriate delivery method. Ensure that the "Process" selected for the appropriate "initial" setting is "D - Follow Up Participation (with Proficiency Change)" and "F - Follow Up Pass Result (with Proficiency Change)." Those settings controll whether or not you're able to change the proficiency of the qualification earned by completion of the learning activity.
Also, take a look at the relationship on the related course type D-A028-Q (course type imparts qualification) has a proficiency set against it in the master data of the course type. From your screenshot above it looks like no proficiency was set for this relationship.
Good luck!
Connie

Keys out of order -- follow up to earlier post

I ran the install disc Disc Utility Test and the Hardware Test disc on the computer since I posted my first question earlier tonight "Computer won't finish start-up -- any suggestions". The Hardware Test came back fine. The Disc Utility test on the install disc says: Keys out of order. It does not, however, explain how to repair this problem on the hard drive.
Is there any way to fix this problem on the hard drive?
Power Mac G4 Quicksilver Mac OS X (10.3.9)

Invest in DiskWarrior. I had the same problem and DiskWarrior fixed it. No other utility programs worked for this problem. DiskWarrior is very inexpensive. Ordered online in the afternoon. It was delivered to my office the NEXT morning.

After syncing Pc-Ipad my Photo's are out of order. In the folders they don't follow the Date-order. I use Itunes 10.6.1.7 and Ipad 5.1. The Problem is the same with XP and Windows 7.

After syncing PC-Ipad my Photo's on Ipad2 are out of order. In the Folders/Albums the Photo's are no longer in the order of (EXIF) dates. I have updated Itunes to 10.6.1.7 and IPad2 to 5.1. I have reset the IPad2. I cleaned the Photo-cache and removed Itunes and Installed again. I tried it with Windows 7 (64) and XP, makes no difference. I tried it with one Album, Photo's also out of order. It doesn't seem to happen with my Ipad1 older software version. I there a bug in the newest software? Thanks for Help!
Rudy from the Netherlands.

problem solved after updating itunes to 10.6.3

Macintosh HD can't be mounted, keys out of order and repairing can't be completed

Hi,
English isn't my mother tongue so I'll make my best to be understood.
I have a Macbook Pro from 2012, running on Yosemite (latest version). I installed Onyx which told me my disk needed to be verified and repaired. Following this advice, I restarted my computer with Disk Utility and completed a verifying and repairing. Which led to a terrible outcome. Since then, everytime I boot with my user on my Mac, my computer shuts down in the middle of the progress bar. I tried to find an explanation to it and fix it, so I tried the following things:
1) I booted with CMD + R to go into Disk Utility
2) I runned a verify Disk on "Macintosh HD" Core Storage Logical Volume Disk, which didn't give me any error
3) I unlocked "Macintosh HD" Mounted encrypted partition and runned a verify disk, which says :
"Keys out of order
The volume Macintosh HD was found corrupt and needs to be repaired.
File system check exit code is 8.
Error : the disk needs to be repaired, Repair disk."
4) Unfortunately, the "repair disk" button is grayed.
5) So I runned repair Disk on "Macintosh HD" Core Storage Logical Volume Disk, which didn't give me any error.
6) I tried to boot my computer again but it still shuts down when trying to open my user.
7) Did all the same process again, but now the error is "Keys length incorrect" and repairing is now always blocked in the middle of the progress bar.
Is there any way I could extract the data I care about (photos, etc.) before erasing the disk or buying a new one?

There's hardware and software.
Your drive could physically be in good condition but something has caused the file structure to be messed up (it just happens sometimes). The directory that keep track of files is corrupt. Disk Utility can help determine if that is the issue. In some cases it can repair the problem but it cannot do it to a drive that is being used to boot the system while you are doing that. You have to boot from another drive. Some things DU cannot repair and you need to try a stronger utility such as Diskwarrior.
A failing hard drive (one with mechanical issues) can be a cause of file structure issues but this is by no means always the case. Apart from looking at the SMART diagnosis feature of Disk Utility (and smart isn't totally reliable) there often isn't a way to tell if a drive is failing until it suddenly happens, which is why you need to maintain backups.
In your situation it does sound serious and not just minor directory corruption. You can try erasing (formatting) the drive, You may need to do this if it is really corrupt, in which case there could be underlying physical issues. I use old technology but if you have the patience you can try erasing the drive with the security option of writing zeros once (don't do more unless you are going on a 3 week vacation). This makes the drive not simply assume everything is okay by forcing it try every part of the drive by writing data. If something is gong wrong you may find it marks a lot of bad sectors, or flat out refuses to format. Then you know you need a new drive.

Out of Order Primary Keys and Blob fields

Hi,
I am using Oracle Migration Workbench to transfer the data from SQLServer 2000 to ORacle 9i. I am running into the following issues and was wondering if you had any ideas what may be going on:
1.) Primary keys are out of order
2.) Blob fields are inserted into the incorrect row
Ex. BLOB field stating 'Application active' should be associated with Act_key (primary key) = 5 and it ends up transfering over with act_key 28.
Thank you for any information you may have on this.
AK

I am very interested in this thread because I have encountered a similar problem with BLOB columns, except that I am also seeing this with CLOB's.
Essentially the all the data gets 'migrated', but the CLOB and BLOB columns are all mixed up!
Any solutions?

Photos not synced correctly to iphone... Unorganized and out of order

After syncing my Iphone 4s with my macbook pro, all of my "Event" photos are out of order. If I open a specific event there will be photos that do not belong there and have no relation to that event... Same with the "faces" feature... I will specifically look for all pictures with "Mary's" face and majority of the pictures are other people with "Mary" not even in those pictures...
I have looked at my macbook and all of the photos seem to be correct on that and in the right locations... Not sure how to fix this problem or what to do :-/
This is a feature that I use constantly and would appreciate if someone could help guide me to correcting it....

Hi Tasha48323,
If you are having issues with unusual or incorrect data after a recent sync with iTunes, you may want to turn off the sync options for Photos, click Apply (this should clear that data off the iPhone), then turn Photo syncing back on and Apply again (which should resync all the data back). You may find the Resolution section of the following article helpful (the article primarily concerns a slightly different issue, but the steps are the same):
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/ts1503
Regards,
- Brenden

Keys Out of Order - Startup Problems HELP!

Hi
I have an iMac G5 running OS10.4.5. It has the following problem:
- Wont boot up off internal HD - I get flashing ? alternating with smily mac on folder icon
I tried booting up on instal CD and running disk repair, get message "keys out of order" and can't repair disk
tried reinstalling OS from original disks to do archive and reinstall - when it gets to point of asking about target disk, nothing happens, no disk icon - nothing, zippo - only option is "go back"
tried booting in single-user mode - won't let me
tried booting in Safe-mode - won't let me
only option I can see now is scrub HD - but can't boot ext hd to do backup first
any other suggestions? or just scrub it?
please help - have desperate teenager who wants his computer back with all his music intact (not worried about homework of course!)
thanks
mel

Keys out of Order is a fairly serious error. Probably the easiest way to fix it is to invest in Disk Warrior, which should be able to handle it with no problems.
EDIT A free alternative if you have another machine available would be to boot from the other drive, copy over everything you want to keep and do an erase/install on the imac, but you will lose all the data on the imac. If you do this, I would check the Zero All Data Option on the erase tab.

Developing Python-SQLAlchemy Interface, OUTER JOIN/ORDER BY/LIMIT problems

Hi,
We are currently trying to implement a database interface for SQLAlchemy, an object relational mapper (ORM) library for python. (http://www.sqlalchemy.org)
There are some MaxDB-specific issues, we have to sort out for this, so perhaps you can give us some help on the following:
1) Outer joins buggy for MaxDB releases < 7.6.03.07:
When joining more than 2 tables, the database may return incorrect results. Simple modifications of the order in where clauses may give different results (e.g. FROM lhs LEFT OUTER JOIN rhs ON lhs.col=rhs.col vs rhs.col=lhs.col)
For 7.6.03.07, these issues seem to be fixed, however, I could not find any changelog or bugfix-report, which confirm that these bugs are completely fixed.
2) ORDER BY/LIMIT seem not to be supported in subqueries.
3) LIMIT is not supported for derived tables, e.g.:
SELECT * FROM (SELECT * FROM a) LIMIT 2
More detailled information about these issues can be found at:
http://www.sqlalchemy.org/trac/wiki/DatabaseNotes (In section MaxDB/SAP DB)
Can you please tell me if and when these bugs/features will be fixed in future MaxDB releases?
Best Regards,
Hermann Himmelbauer

Perre wrote:I'm used to being able to pick one or a couple of songs and then adding it a specified playlist. Is this impossible in sonata?
It's clearly not impossible, just different than you expect. Create your playlist as you want it to appear in the Current tab (meaning don't dump every single song from your library in there, just the ones you want) and then save the playlist.
Perre wrote:And if I try to play the m3u file created (the one with every song listed) through freevo I get a message that the directory is empty. What am I doing wrong??
Look at save_absolute_paths_in_playlists in your mpd.conf.

PowerBook doesn't boot. Keys out of order?

A few weeks ago my powerbook's keyboard stopped working properly - unresponsive or nonresponsive keys. It seemed to right itself after a couple of boots.
Last time I was using it (weeks of use later) it started to make a high pitched whine and I had to shut it down using the power key as nothing else would work. I have not since been able to boot it up. The boot process gets as far as the 'bong' and the grey screen with the spining time cog and then the screen goes black and it goes off.
I have just tried running disk first aid from the installation disk and got the following message:
Disk utility stopped repairing "macintosh HD" because the following error was encountered:
The underlying task reported failure on exit OK (the blue button)
I noticed in the report box the following:
in red-
Keys out of order
in green-
Rebuilding catalogue B-tree
The first aid got no further than this
Please can somebody help me?
Has my drive failed? Is there any thing else I can try to do with my installation disk or do I have to resort to target mode to try to rescue my files before flinging it through the window?!

Hi, Christie. If you're planning to fling your Powerbook out the window, please be sure to open the window first, and give me time to get out there in the yard to catch it before it lands.
What you need is DiskWarrior (the best option) or TechTool Pro, which should resolve the "keys out of order" problem in your hard disk directory in just a few minutes. That problem may have been caused when you forced the machine to shut down after it began to whine, or it may have been present beforehand. Directory corruption of that kind is most often caused by abnormal operations like forced shutdowns and freezes, but it can also cause them later on if it isn't corrected. A failing hard drive can also cause its own directory to be corrupted, and bad RAM and other hardware faults are also possible causes of directory damage. But much more often the culprit is just a one-time glitch in software that can be remedied using DiskWarrior or TTPro and won't soon recur (as it's likely to do very soon if there's an underlying hardware cause).
If you have a complete, recent backup of your hard drive, another option to consider is erasing the drive completely and restoring everything to it from your backup. That too will write a new, undamaged directory to the disk, but it's more tedious than using DiskWarrior or TTPro. Of course it's also free.

Final Cut Express occasionally renders audio "out of order"

I'm running into a very occasional problem, which is just rare and random enough to not be recreatable on demand, and so is proving difficult to troubleshoot.
In a nutshell, sometimes - not very often - when I render an audio stream it will report an estimate of 6 hours or more for something even as small as a 1-second transition. This is not a composite or layered video or audio by any means, just a standard cross-disolve/cross-fade (+3) between two adjacent clips. When this type of extreme estimate occurs, I may find afterward that rendered audio in the sequence has been moved around, sort of like a shell game. Usually this anomaly only happens over a minute or less of the project. Trying to describe this, a portion of the rendered audio from one part of the timeline will replace a portion of rendered audio elsewhere -- as if some audio render segments have gotten linked out-of-order. If memory serves, the displaced audio so far has always appeared earlier in the timeline than it should. The replaced audio just doesn't seem to appear anywhere. So far, if I remove the associated audio render files and re-render, it fixes the problem, but I'm trying to sort out what is causing the behaviour in the first place so that I can take steps to keep it from happening at all. It raises havoc with trying to meet deadlines when I'm stuck re-rendering sometimes entire segments....
For some details about the environment:
     System is a Mac Book Pro, 2.4GHz Intel core duo, 4GB RAM, OSX 10.5.8.
     I'm using FCE4, importing SD clips for TV production from Sony cameras (sorry, I'm not part of the camera crew, and I can't recall the exact model number of their cameras - they are all the same model though, configured the same, so no known variables from that end).
     The cameras record standard-def MPG (Mpeg layer 2, so yes I convert them before importing into FCE), I convert them using the ffmpeg library. I tried FFMPEGX, but I find I have far more control over video/audio parameters and combinations with the command-line version. The parameters I use result in a Quicktime (.mov) file with these parameters: 16-bit integer (little-endian), stereo, 48kHz, DV 720x480 (640x480), Millions (of colors). FCE is generally quite happy with these parameters, and does not require immediate rendering of the audio or video - unless plugins are applied of course. As far as plugs, I generally only use the built-in FCE plugs for comp/lim and parametric EQ. If I have to get much more detailed than that, I'll go to Digital Performer (read on).
     In some cases the audio of the original clips is in quite a bad state, and requires far more detailed restoration than FCE can provide. As I am primarily an audio engineer, I rely on Digital Performer and friends for audio restoration, exporting from there a new clip, usually duplicating the original video (self-contained), though sometimes I do let DP export a reference movie. Final Cut doesn't seem to have any trouble with the .mov files exported from DP either way, and this anomaly doesn't seem to care whether the clips involved were processed by DP or not.
     Disk space, memory, and CPU load are all well within acceptable ranges; and with my previous years of experience as a systems admin, I am well aware of the system impact and ramifications of using internal vs external disks, memory allocation, disk filesystem operating overhead, etc.
As I've mentioned, this is not a show-stopper, I have a work-around to correct it when it happens. It's just a bit of a bugger *when* it happens, and I really wish I could work out the root cause of it, so that I can take steps to avoid the problem in the first place. Any suggestions/insight/help would be greatly appreciated, thank you! :-)

Thank you for your response.
Grr. I had a nice response ready to post, and apparently the system logged me out and wouldn't let me log in while keeping the text. I'll condense it a bit, since I've stumbled across some additional points to ponder while typing.
The clip:
And the sequence:
Yes, I see that the clip is 16-bit integer and the sequence supports 32-bit float, but this should not pose a problem since modern digital audio processing up-converts smaller sample formats to larger ones on the fly for processing, and exports whatever format is desired at the end. If this *was* the problem, I should always be off by a ratio of 2:1 on all audio data, but I'm not.
Additional notes: the system generally has Firewire, USB, and network mounts (all required for my work), and the internal drive (which *is* 7200RPM) is partitioned into a system and a user area to keep audio and video projects out of the system's disk space. Most main clips for a project are placed on the internal user space for speed, externals hold auxilliary files (stills, adverts, livetype, etc).
It was at this point in my previous typing that I began to realise that the anomaly seems to begin in sync with some random livetype object. It then extends a bit past the livetype object, so it's not locked to that object; and multiple instances of the same livetype object DO NOT result in multiple instances of the audio anomaly; it only hits a single instance; and again it usually cleans up when the audio render files are removed and re-processed.
This leads me to wonder about a possible odd combination of events/processes on the system, and whether or not FCE handles livetype natively or requires a livetype helper (i.e., another process stuffed into the system table). This sort of external influence would be a transient sort of event, and therefore could easily be out of the way by the time second render attempt is begun - resulting in the "fix" by removing and re-generating audio render files.
It makes sense to me, but it's still hypothesis and supposition at this point.

Course follow up out of order, incorrect Qualification dates

Similar Messages

Maybe you are looking for