"Course Manager had an error. Click reload to continue."

I keep getting the error message abobe when I try to add a post in the iTunesU Course Manager. When I click reload, it erases my post and sends me back to the post menu.
I have reset Safari, relaunched safari and even tried using a different mac. I still get the same problem.
I'm using OSX 10.9.1.
Does anyone know how to solve this error message.

I am getting this error, but the situation is different.
(a) I created two courses before our school's iTunes-U site was approved.
(b) When I go to submit the courses to be added to our iTunes U account now that it is created, I get this message.
(c) I can access the course via a share, but can't get it into our school's iTunes U site.
Any ideas?

Similar Messages

Course manager iTunesU error

I created an iTunesU account in the Course Manager as an independent instructor (my college does not have an iTunesU account). I can log in to course manager but the only thing I can see is the Instructor Info page, my institution has been cleared, and I'm asked to accept the terms and conditions again. I fill in everything and agree to the terms and conditions and I get the the message: "'Course Manager had an Error' click to reload." When I click to reload it I'm taken back to the instructor info page and what I had just entered is gone
I was trying to create a profile using another Apple ID with @icloud.com or @liceorespighi.it , but it is the same situation!!!!!
Someone could help me. Thanks

I had this issue too. It seems to have gone away on it's own, although Apple has assured me they are still looking into the problem.

When i start ifind i get message about load error. i click reload option and icloud main screen opens ifind shows a map that is misaligned. phone shows several blocks away. can play sound thru ifind and acess info on phone. all os upto date. any idea

start ifind from web on my dell pc with win 7. get error on load to retry later or reload. click reload and icloud main screen comes up. I hit ifind and phone shows up on a misaligned map and is shown several blocks from actual location. tried daughters phone and map shows up inaccurate for hers also. I have 4s she has 5c all ios on phones are updated . I can get phone to sound and access data such as contacts, calendars. the problem with bad map and message that there is a problem on starting. previously the map had no problems and location was accurate to within a short distance.

Thank you for the sympathy and the information about the Adobe.com forum Michael.
I posted here because, to be honest, for a company that's acknowledged their installers and updaters and support needs some work, they seem very determined to obfuscate the means by which users can provide direct feedback to the company. Much like you, I've also noticed a trend in CS5 installations that mirrors the issues that were present in CS4. it's a sad state of affairs.
As for my installation, you are also quite right to say that a clean install would have been a lot faster than what I went through with TS and it was actually my first idea. Before calling TS I'd actually read through the forums and noticed that a large number of users who were faced with my situation had no other choice but to reformat. I was just giving Adobe the benefit of the doubt and wasted 2 and a half weeks through that course of action...
What makes this situation even more frustrating is that the installer failed on a fresh system. It was a custom-built design machine, assembled and configured by myself. The only software that had been installed on it prior to Design Premium was Firefox, an FTP client and the start of my problems, trial versions of various CS4 programs. I used trials just long enough to retire the previous design computer so that I wouldn't contravene the EULA's stipulation of not running more than one instance of software at the same time on different machines. Turns out being honest once again penalised a legal customer.
If there is just thing users should learn from my far from unique tale of failed tech support it's that if you ever run into a problem with the installation, don't bother calling TS, just reformat and start from scratch. It might seem like it'll take longer to get going again, but in actuality, it's the opposite. Reformatting means you'll be up and running in about 1 or 2 days rather than 2 weeks.
Marc

ITune U Course Manager Error Message

I am trying to update my course info by adding a picture and editing the course description. When I click on save I always get the error message:
Courese Manager has encountered an error.
Then I have to reload the course manager which means my changes weren't applied. Any ideas how to get around this?
I have the latest OS. One thing I am wondering about is if having Microsoft Silverlight on my computer might be affecting this? I need this for a brief time for work so I can dump it in a couple weeks.

we have the same problem! Why they do not share information about this! Have been looking all day for more information.

I get a download error on the creative cloud desktop app. When I click reload applications it remains the same. How can I get this message to be removed?

I get a download error on the creative cloud desktop app. When I click reload applications it remains the same. How can I get this message to be removed?

Hi Bericala,
Same issue has been discussed in the below mentioned link.
1) Creative Cloud "Download Error" message
2) Creative Cloud - Download error - stubborn error
Let me know if it helps.
P.S - If this or any other response helps answer your question, please take a moment to mark the response as helpful or correct to make it easier for future users to find the solution to the same issue
Thanks,
Eshant Jindal

Had to wipe and reload my computer, am trying to download web premium 5.5 but when i try to open and install gives me an error message of trouble extracting file try downloading again. How can i download?

Had to wipe and reload my computer, am trying to download web premium 5.5 but when i try to open and install gives me an error message of trouble extracting file try downloading again. How can i download?

You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS5.5: http://prodesigntools.com/adobe-cs5-5-direct-download-links.html

Error Message on iTunes Course Manager

I got in to my course manager once. I creted the shell of the class. I have the most recent firefox. I continue to get an error message when trying to log in to add to my course. What's up with this? How can I get around it?
Ron Cordell
[email protected]

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Reset all settings
Settings > General > Reset > Reset all Settings.
This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.

Course Manager Profile Error

I'm trying to create an iTunesU account in the Course Manager as an independent instructor (my college does not have an iTunesU account). I get an error every time I try to create the profile. I've resized the picture to be exactly 300x300 pixels; I've also tried 350x350 pixels and 600x600 pixels. I do not have any extensions in Safari or Firefox and get the same error on both browsers. I'm running OS 10.6.8 and Safari 5.1.7.
Thank you!

I solved my own problem. I was trying to create a Course Manager profile using an Apple ID with @gmail.com. I have another Apple ID with @me.com and that worked no problem. Go figure. Hope this helps someone.

I can't log in to course manager anymore. It says "error occurred"

Hello,
I wanted to log in to Itunes U course Manager and since yesterday
I've noticed that I can't log in anymore. It's certainly not an Apple ID
or password error. It tries to log in en then I get :
An error occurred - try again.
Does anyone know how I could fix this?
Thank you
François

Hey Ximenalp,
Thanks for the question. The following resource outlines the error message you are receiving, along with a potential resolution:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
"Error -50," "-5000," "8003," "8008," or "-42023"
These alerts occur due to timeouts or conflicts trying to write a file during download.
If you encounter this issue while accessing iTunes Store:
See iTunes 9: "One Moment Please" or "Error (-50)" message when accessing iTunes Store
Thanks,
Matt M.

My ipod classic had an error of 1439.It finally let me restore it and now it says it cant restore because of error 1439. why?

My ipod classic had an error 1439. It finally let me restore it and now it says error 1439 again and wont let me update my ipod. Why?

Hey there Palmer
How are you?
Well, I have an iPod Classic, it gave me the error -1436 error and would not restore on iTunes.
I did the following:
My Boss (@work) has a fairly old iBook but it has OS-X, so I decided to give it a try and connected my iPod to it.
The system showed a window telling me that the disk is not MAC formated and needs to be validated prior further action. Snce it is a Mac product, I thought "yeah, go ahead".
It then opens the disk manager utility for the Mac and showed the disk. It's window has some tabs, one is to verify the disk, so I verified it. Guess what, it had some invalid clusters.
Then I formatted the iPod to OS-X Plus file system (next tab to the right). After formating the iPod, I "ejected" the iPod and reconnected to my PC. The Windows iTunes found an iPod with Mac file system and asked me to restore it. As I clicked on the "restore" button, I crossed my fingers as this was the last resource I have.
Finally, after the file extraction was done, it began to restore the iPod!!
I'm so happy about being able to restore the iPod that I decided to share with all you guys this solution as it is the most usefull, in my opinion.
Hope you can find someone with an iBook or a desktop Mac, so you can fix yours.
If it works for you, make sure to share the tip!!
Kind regards
Salvador Rivera

Error 205 Reload Software

Hi everyone, I have a Blackberry Curve 9360 phone. It fell from my hand 2 days ago, it restarted immediately but after booting showed a white screen "Error 205 Reload Software". Since then I have tried everything but its still not working. I have used the 'AppLoader', but it freezes at some point. Its not even connecting to the desktop device software. I have never backed up my data and I don't want to lose any file . Pls, i need your help urgently. Thanks

Hi and Welcome to the Community!
Here is a KB that discusses that error:
KB17024"Application Error 205" appears on the BlackBerry smartphone
While it is for a prior model BB, hopefully it still contains something useful! There also are multiple existing threads on this site that discuss that exact error...your review of those might prove useful, and a search of this site, using the error message, error code, or symptom, should reveal all applicable existing threads to you.
beccaodil wrote:
I have never backed up my data and I don't want to lose any file .
You took a big risk there...backups are, as with all computing devices, not a reactive nor an optional activity. With this error, it is highly likely that the data on your BB is already gone. If the above KB does not provide you with a recovery, then you may want to try these also:
KB27956 How to recover a BlackBerry smartphone from any state
Of course, if the problem is hardware, then there is nothing to be done here...
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Error 507 reload software

Hola,
Puede alguien ayudarme, tengo un smartphone Blackberry Torch 9800, la pantalla se quedo en blanco con un mensaje que dice Error 507 reload software - for further information, please visit :
www.blackberry.com/507
Intenté cargarle nuevamente el device sofware, sin exito hasta el momento, comienza a descargarlo y son 430 modulos, cuando llega al 190, se para y me dice, pronblemas de conexión, intente más tarde, pero ya hace tres días que lo intento y son exito alguno.
No sé que más hacer..
Could somebody help me please, I have and smartphone Blackberry Torch 9800, the screen is frozen with a message
Error 507 reload software - for further information, please visit :
www.blackberry.com/507
I tryed to download the device software since three days ago unsuccesfully, it start download ( it says 430 modules to download ), but when it gets up to 190 modules it stop and I got a message, internet conexion problems try later ).
I don't know what else to do.
Gracias y saludos.
Daniel

See the link below, for the download and simple installation instructions.
First locate your carrier and the OS file you wish to use.
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
Do a backup of your device first, using Desktop Manager > Backup. Close Desktop Manager upon completion.
1. Download the OS file to the PC then install it to the PC by running (double clicking) the file you downloaded.
2. Go to c:\program files\common files\research in motion\apploader and delete the file named "vendor.xml."
3. Plug in BB and double click on "Loader.exe." It's located in the same place as the above vendor.xml file.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How do you resolve Financial Management service validation error in EPM ?

Does anyone know how to resolve Financial Management service validation error from EPM Diagnostic Report?
Environment:
Quad-Core AMD Processor 2.2 GHz (Server Machine)
5 GB RAM
Server 2003 Standard 32-Bit SP2 (also tried in Enterprise)
Application Server:
WebLogic Server 9.2 Custom Installation (with Add-Ins)
http://www.oracle.com/technology/software/products/ias/htdocs/wls_main.html
Database:
Oracle 10gR2 (Standard Installation per step-by-step guide from Oracle)
http://www.oracle.com/technology/software/products/database/index.html
Hyperion EMP System 11.1.1.3:
Installer
Foundation Services (4 Files )
EMP Architect
Financial Management, Planning, Financial Reporting and Web Analysis (primarily interested in FM)
http://www.oracle.com/technology/software/products/bi/performance-management/index.html
The following are the sequences of steps carried out during the Installation and Configuration of EPM:
1)     Installed the Server along with its respective SP2 – Shutdown the machine
2)     Assigned IP and DNS addresses
3)     Installed Window components by ticking Application Server Console, Enable COM+ access, IIS and DNS
4)     Run “dcpromo” to create a Domain Controller with default values and assigned a domain name – Shutdown the machine
5)     Installed Weblogic Server 9.2 and configure it using Configuration Wizard – Selected “test environment” and ticked default “listening port” – Shutdown the machine
6)     Basic installation of Oracle Database 10gR2 using Step-by-Step guide provided by Oracle and carried out Password Management steps. After installation, I then created a user “oracle” and assigned it to ora_dba User Group with the required Local Security Policies – “log on as a batch job” and “Act as part of operating system”
7)     Logged into database and acknowledge the licensing window – Shutdown the machine
8)     Restarted the machine and checked all relevant and newly installed Database and WebLogic services are running.
9)     Started Installing EPM components by double clicking “InstallTool.cmd” and selected all relevant components at ONCE as per Installation Guide – Result: - All selected EPM components were successfully installed without errors or exceptions
10)     At the end of installation window, I carried out the configuration in the following scearios:
Scenario 1: Configuration all at Default settings
Scenario 2: Configuration all, except “Application Server” I selected the WebLogic9.2
Scenario 3: Configuration all, except “Application Server” and “Workspace Web Server” were being Welogic9.2 and IIS HTTP
RESULT: After all numerous installations, all came down to ONE ERROR from “Diagnostic Report” stating the following:
Financial Management:
FAILED SVR: HFM Service Validation Check if HFM service in working state.
Error: Error message: <03/11/2010 05:32:26 PM> CreateApplicationCAS... Failed at line: 2
Recommended Action: Make sure HAT utility is working. 1 s
I then simply ignored this error and tried to deploy an Application, all worked fine until you get to the point at “Job Console” where you need to press “Refresh” button. Progress remained at 12% until it got timedout after 300 seconds and force attempt of refreshing resulting in “aborted” job with the following error:
Error Reference Number: {DB3940F5-2D4A-46AB-A370-77F82F121BBA}
Num: 0x8000ffff;Type: 0;DTime: 4/12/2010 4:39:58 PM;Svr: PBAR;File: CHsvDataSourceImpl.cpp;Line: 196;Ver: 11.1.1.3.0.2413;
Num: 0x8000ffff;Type: 0;DTime: 4/12/2010 4:40:07 PM;Svr: PBAR;File: CHsxServer.cpp;Line: 1276;Ver: 11.1.1.3.0.2413;
Num: 0x8000ffff;Type: 0;DTime: 4/12/2010 4:40:07 PM;Svr: PBAR;File: CHsxServer.cpp;Line: 1190;Ver: 11.1.1.3.0.2413;
Num: 0x8000ffff;Type: 0;DTime: 4/12/2010 4:40:07 PM;Svr: PBAR;File: AgentHelper.cpp;Line: 728;Ver: 11.1.1.3.0.2413;
Num: 0x8000ffff;Type: 1;DTime: 4/12/2010 4:40:08 PM;Svr: PBAR;File: CHfmAwbAgent.cpp;Line: 744;Ver: 11.1.1.3.0.2413;
This is, I believe preventing me from deploying Consolidation Apps, including Sample Application provided with EPM Downloads. I have tried installing and configuring by components. All failed with the same outcome.
I have been working on this effortlessly in different combinations to get at least one Financial Management Application get deployed so I could enhance my learning adventure. As it stands, I am not sure where to get help and completely lost in the World of Oracle. I am also come to wonder whether “Free Downloads of EPM” are indeed, is “complete and is in working-state” or do I need a licence to use for personal learning experience? Are there different downloads for different needs or/users For example, eDelivery downloads are different from OTN Agreement downloads?
I have downloaded the files from following URL:
http://www.oracle.com/technology/software/products/bi/performance-management/index.html
I am completely lost and all services are up and running and not sure what I am missing!! Any assistance will be greatly appreciated.
Many Thanks
BT
Edited by: user8973921 on 13-Apr-2010 05:08
Edited by: user8973921 on 13-Apr-2010 10:56
Edited by: user8973921 on 14-Apr-2010 02:30

I am having exactly the same problem using Windows 2003 Standard editions SP2. Is there anyone who knows a possible solution for this? The effect on HFM is that is not possible to create an application, since I always get an error that says "Server execution failed"
Error Reference Number: {E68F87E6-588E-4665-862C-AAB02CB299DA}
Num: 0x80080005;Type: 0;DTime: 12/3/2009 5:21:47 PM;Svr: KINGTUT;File: CHsxServerImpl.cpp;Line: 3522;Ver: 11.1.1.3.0.2413;
Num: 0x80080005;Type: 0;DTime: 12/3/2009 5:21:47 PM;Svr: KINGTUT;File: CHsxServer.cpp;Line: 1115;Ver: 11.1.1.3.0.2413;
Num: 0x80080005;Type: 0;DTime: 12/3/2009 5:21:47 PM;Svr: KINGTUT;File: CHsxServer.cpp;Line: 857;Ver: 11.1.1.3.0.2413;
Num: 0x80080005;Type: 0;DTime: 12/3/2009 5:21:47 PM;Svr: KINGTUT;File: CHsxClient.cpp;Line: 2106;Ver: 11.1.1.3.0.2413;

HT5113 Why does the course manager not open on my PC but does on my Mac?

Cannot access the course manager from my PC running windows 7 and ie9.

Right-click or Control-click on the icon for TextEdit in the Dock. In the popup menu that appears, go to the Options submenu and if the item "Open at Login" is checkmarked, select it to uncheck that item.
Then repeat, and if the item "Remove from Dock" is shown in the Options submenu, select it.

SSIS 2012: SSIS Error Code "Excel Connection Manager" failed with error code 0xC0202009.

Hi,
This is kind of weird issue that I am experiencing with excel connection manager in SSIS 2012. This issue occurs sometimes but when I close and re-open SSDT (SQL Server Data Tools - newer BIDS) then this issues goes off temporarily.
Just FYI, through SSDT environment I executed the package successfully with both settings Run64bit runtime setting to Yes and No when error does not occur.
So far I have installed
http://www.microsoft.com/en-us/download/details.aspx?id=13255 (Microsoft Access Database Engine 2010 Redistributable).
I still remember for older versions of SQL Server (2005 & 2008) that I have executed Excel connection SSIS packages with Run64bit runtime = false i.e. in 32-bit mode. As far as I know I think Excel 64-bit issue has been resolved with SQL Server
2012 release.
Here is the detail of error message:
TITLE: Package Validation Error
Package Validation Error
ADDITIONAL INFORMATION:
Error at Data Flow Task [Excel Source [2]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection
Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error at Data Flow Task [SSIS.Pipeline]: Excel Source failed validation and returned error code 0xC020801C.
Error at Data Flow Task [SSIS.Pipeline]: One or more component failed validation.
Error at Data Flow Task: There were errors during task validation.
Error at Package [Connection manager "Excel Connection Manager"]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft Access Database Engine" Hresult: 0x80004005 Description: "Unspecified error".
(Microsoft.DataTransformationServices.VsIntegration)
Here are my environment details:
SQL Server 2012 {Microsoft SQL Server 2012 (SP1) - 11.0.3368.0 (X64) } , Excel 2010 (32-bit). I am developing SSIS code on Virtual desktops with Windows 7 32-bit OS.
Also it occurred to me that since Virtual Desktops are on Shared Infrastructure, the source files and SSIS packages (code) can be on Shared drives for e.g. \\<Corpnet>\userdata\<Corp_Users_Grp>\<Username>\Visual Studio 2010\Projects\Integration
Services Project2\Integration Services Project2\Package.dtsx.
Does this kind of Shared drives have any impact to give this issue?
Thanks in advance!
Ketan
P.S.: I had look at this forum question -->
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/903bbe1d-e070-4c43-9d3b-0a5193550029/64bit-error-in-excel-connection-manager-in-ssis

Hi Arthur,
Thanks for your response.
Yes, it looks like SSIS still has bunch of issues with Excel files like as follows:
1) Some times excel source files cannot be parsed by excel source connection manager.
2) For derive column conversion, we can't replace the existing column. rather, we have to add the derived column as " add as new column" which is tough to manage while destination mapping.
3) If an column in excel contains a data which is not of the data type assigned for the column in excel, the excel source reads that data as "null". For the same, we can't validate the data and redirect the erroneous data in reject file. <-- For
this we tried IMEX setting also
4) In multi-tab/sheet excel file, excel source is unable to detect a tab and identify the metadata of the excel.
I am also checking Microsoft connect for Excel issues with SSIS 2012(https://connect.microsoft.com/SQLServer/SearchResults.aspx?SearchQuery=excel#&&PageIndex=22
As worst case scenario, I am thinking of converting Excel to CSV file or Flat text file. (http://www.mssqltips.com/sqlservertip/2772/importing-data-from-excel-using-ssis--part-2/).
Do you think it is advisable to convert Excel into CSV or Flat file.
Thanks,
Ketan

"Course Manager had an error. Click reload to continue."

Similar Messages

Maybe you are looking for