Course (stepping) line width and opacity using paintbrush tool with stylus control enabled

why are my lines jaggy/stair-steppy at the ends when i use the paintbrush tool?
I have Photoshop touch for phone loaded on my Samsung Galaxy Note i717 running Android v4.0.4.
I enabled stylus control for both size and opacity.
Rather than having lines that begin and end smoothly like real ink/paint, they step from skinny to medium to fat.
Is there a fix for that? The Sketchbook app and S-note can make smooth lines - why can't PS touch for phone do that??
-- I tried performing an uninstall/reinstall, but that didn't change the line quality.
essage was edited by: sbrackenrich

why are my lines jaggy/stair-steppy at the ends when i use the paintbrush tool?
I have Photoshop touch for phone loaded on my Samsung Galaxy Note i717 running Android v4.0.4.
I enabled stylus control for both size and opacity.
Rather than having lines that begin and end smoothly like real ink/paint, they step from skinny to medium to fat.
Is there a fix for that? The Sketchbook app and S-note can make smooth lines - why can't PS touch for phone do that??
-- I tried performing an uninstall/reinstall, but that didn't change the line quality.
essage was edited by: sbrackenrich

Similar Messages

  • How can I use Pro Tools with Fire Wire interface and Fire Wire external HD

    If Mac Book Pro has only one Fire Wire jack and I want to use Pro Tools with an M Audio 1814 Firewire interface and an external Fire Wire HD how do I get around the fact that the Mac Book Pro has only one fire wire jack?
    Pro Tools says that they DO NOT recommend using USB 2 Hard Drives as recording drives.
    If I plug my External HD into the back of the 1814 it is way too slow to use, plus, I don't know why, Pro Tools is telling me that my External HD is "not a valid audio volume". It is a MAC OS Extended (Journaled) external Firewire HD (G-TECH G-DRIVE)
    Stuck...
    Message was edited by: Mezcla

    You could consider getting a firewire hub or get an expresscard 34 adapter with a firewire port.
    I personally use a Belkin Expresscard adapter that gives me an extra firewire port as well as two extra USB 2.0 ports.
    Good luck.

  • I have recently update to the OS Maverik and I use a projector with a mini display port adaptor to my MacBook Air, ever since the only thing that projects is my desktop picture.  I cannot get it to project my school work that I need to teach my students.

    I have recently update to the OS Maverik and I use a projector with a mini display port adaptor to my MacBook Air, ever since the only thing that projects is my desktop picture.  I cannot get it to project my school work that I need to teach my students. Help!

    Hi Becki514,
    Welcome to the Support Communities!
    The following articles may help you with your projector issue:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
    http://support.apple.com/kb/ht3382
    Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display
    http://support.apple.com/kb/ht3131
    I hope this information helps ....
    Have a great day!
    - Judy

  • How to create users and groups using WLST Offline with Weblogic 8.1.4

    How to create users and groups using WLST Offline with Weblogic 8.1.4?
    Any ideas?

    Hi this is how i created a user using WLST Offline?
    cd('/Security/' + domainName)
    # Delete the default user name weblogic
    # incase you want to remove the defualt user weblogic
    delete('weblogic','User')
    # Creating a new user defined
    create(userName, 'User')
    # Setting the password of the user you created.
    cd ('/Security/' + domainName + '/User/' + userName)
    cmo.setPassword(password)
    Regards
    Makenzo

  • Want to use bluetooth speakers with volume control, don't want the iPad internal speaker sound, is this possible?

    want to use bluetooth speakers with volume control, don't want the sound at the iPad internal speakers, only on the external speakers.  is the possible? and how

    You can't downgrade the iOS.
    Take it to an Apple Store for evaluation.
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/
     Cheers, Tom

  • How can I create a line width 0 when using a line style other than solid?

    Every time I select a line style other than solid,
    the line width gets reset to 0. This makes for a
    VERY faint line on the printed output.

    If this question is for the HiQ box, this is not a product that is supported by general technical support Applications Engineers any longer. The help for HiQ is exclusively online, and can be found at http://www.ni.com/support/hiqsupp.htm
    Of course, this question can still be answered by other HiQ users that visit this forum. Please post back if you have any questions. Thanks, and have a great day.
    Daniel McChane
    Application Engineer
    National Instruments

  • I am facing problem regarding graphical user interface. I am using text box for editing files. I want to show the line numbers and graphical breakpoint​s along with text box. Can anybody help me in this? Thanks.

    I am facing problem regarding graphical user interface. I am using text box for editing files. I want to show the line numbers and graphical breakpoints along with text box. Can anybody help me in this? Thanks.

    Thanks for you reply.
    But actually I don't want to show the \ (backslashes) to the user in my text box. 
    Ok let me elaborate this problem little more. 
    I want to show my text box as it is in normal editors e.g. In Matlab editor. There is a text box and on left side the gray bar shows the line numbers corresponding to the text. Further more i want that the user should be able to click on any line number to mark specific line as breakpoint (red circle or any graphical indication for mark). 
    Regards,
    Waqas Ahmad

  • Abobe Flash CS3 Stage width and height Using script

    Hi,
         How do control the stagewidh and stageheight USing script in AS3?
    Thanks.

    stage.stageWidth=whatever;
    but check the stagescalemode class.

  • Using local android-sdk and android-sdk-platform-tools with phonegap

    Hello,
    I've installed android-sdk, android-sdk-platform-tools and android-sdk-build-tools packages from AUR and phonegap with npm command line utility of nodejs. When I try to build android app using the command:
    $ phonegap run android
    phonegap fails to detect locally installed android SDK environment and uses remote one:
    [phonegap] detecting Android SDK environment...
    [phonegap] using the remote environment
    I tried adding paths /opt/android-sdk/tools/, /opt/android-sdk/platform-tools/ and /opt/android-sdk/build-tools to $PATH variable but still, no luck. How can I make phonegap use the local android SDK environment?
    Last edited by th0th (2013-08-10 21:06:29)

    hi, you can try run `phonegap local run android`
    if you see "ant: command not found" error, please install 'apache-ant'
    ╭─root@vkill /opt/workspace/my-app ‹ruby-1.9.3›
    ╰─➤  phonegap local run android                                             8 ↵
    [phonegap] adding the Android platform...
       [error] Please install Android target 17 (the Android 4.2 SDK). Make sure you have the latest Android tools installed as well. Run `android` from your command-line to install/update any missing SDKs or tools.
    ╭─root@vkill /opt/workspace/my-app ‹ruby-1.9.3›
    ╰─➤  phonegap local run android
    [phonegap] adding the Android platform...
       [error] An error occured during creation of android sub-project. /root/.cordova/lib/android/cordova/3.0.0/bin/create: line 104: ant: command not found
    An unexpected error occurred: ant jar > /dev/null exited with 127
    Deleting project...
    ╭─root@vkill /opt/workspace/my-app ‹ruby-1.9.3›
    ╰─➤  yaourt -S apache-ant
                                                                                                                                           1 ↵
    ╭─root@vkill /opt/workspace/my-app ‹ruby-1.9.3›
    ╰─➤  phonegap local run android                                                                                                                  1 ↵
    [phonegap] adding the Android platform...
    [phonegap] compiling Android...
    [phonegap] successfully compiled Android app
    [phonegap] trying to install app onto device
    [phonegap] no device was found
    [phonegap] trying to install app onto emulator
    [phonegap] successfully installed onto emulator
    Last edited by vkill (2013-09-04 17:48:44)

  • Preview glitch when searching for words on page and when using text tools to write comments/notes on .pdf slides, why?

    When using Preview to access my class notes as .pdf files, I have encountered extremely frustrating glitches when trying to search for specific words or phrases within the .pdf files and when trying to use 'text tools' to write notes on the .pdf slides.  Preview did not behave in this manor with Mountain Lion OS.  This seems to correlate with my recent upgrade to Mavericks OS.
    When using the search function you should be able to type in any number of letters or words and press enter to continually cycle through the highlighted findings that match what you have typed in.  Instead it now, typically, stops tracking what I type in after about 3-4 letters and the yellow highlight turns grey.  Once it does this if you try to press enter to cycle through what it has found it no longer cycles.  It never did this in Mountain Lion using the very same .pdf files I had previously used in the old OS, and it does this despite there being multiple matches for what I am searching.
    When clicking 'show edit tool bar' button and then 'text tools' button to be able to free text notes on the .pdf file I have to exit out of the 'text tools' mode to be able to advance to the next page.  This is extremely inconveneint and, again, Preview did not do this in Mountain Lion.
    These are my two major complaints about Preview that I have discovered so far in my short time using it with the new Mavericks OS.
    Any help would be very much appreciated.

    I have this issue too and was pleased to find this thread.  Did either of you find the source of the problem or how to fix it? 
    I've tried using Wondershare PDF Editor as well and wondered that had messed some settings up.  Have either of you used that? 
    If so, how would I revert to a clean version of Preview?
    Hope we can get this sorted. 

  • Can i turn down front left and right using ddts decoder with the g500

    hi want to get ddts 100 decoder for my gigaworks g500.when im watching a move i have to have it up on about 2.7 bars.to hear the center speaker then the action is to louad.i can turn down center and rear and sub but no front left and right.can you turn down front left and right using the decoder.do you still have to use the controll pod for the gigaworks if i had the decoder in or do u use the decoder to turn it up thanks plz help.

    System Preference > Accessibility
    Select   Mouse & Trackpad  in the left side box.
    Double-click speed 
    Make it slower by dragging the pointer to the left.
    Best.

  • Is there a way to use eraser tool with soft edges?

    Hi,
    I am wanting to erase the edges of a rectangular object so that it blends better with the background, and am wondering if there is a way of doing this using the eraser tool with soft edges?
    Here is a snapshot to illustrate further what I mean:
    You should be able to see that above the curve on the left there is a gradient which extends to the top of the image. This is the rectangle which I have applied a gradient to. At the top of the rectangle the colour is the same as the background. What I am trying to do is to blend the left edge of the rectangle in with the background above the curve (below the curve there is a line so no blending is needed). The way I thought of doing this is using the eraser tool with a soft edge. I can do this in Photoshop, but I'm not sure if this is possible or the best approach in Illustrator.
    I would be grateful for any advice on this,
    Thanks,
    Nick

    I don't really understand yoru end goal. However, the answer to yoru Eraser Tool question is no. There is no such thing as a "soft edge" for the eraser tool.
    The ways to blend objects in specific areas only would be:
    Gradients with transparent stop
    Gradient mesh with transparency nodes
    Opacity masks
    Fake it by blending to the same color as the background.

  • Using perspective tool with text in AI CS5

    Hi,
    I am new to AI CS5 and was wondering if someone could please tell me how to use the Perspective tool with text?  Also, does the text have to be expanded in order to use the perspective tool or is that not recommended? 
    Thank you,
    Diane

    Hi Diane,
    Here's a video showing how to do it http://vector.tutsplus.com/tutorials/tools-tips/quick-tip-put-text-into-perspective-using- illustrator-cs5/
    For more, please refer to the Illustrator CS5 help docs on Perspective drawing.

  • Using AbleNet intelliswitch with switch control?

    I am attempting to interface AbleNet IntelliSwitch to Yosemite Accessibility Switch Control on MacBook Pro to use a button switch as a click and enter.  I have that set in the Intellitools software, but Mac is not recognizing it at all points when tested by manually moving the mouse pointer and then clicking with the external switch.

    The IntelliSwitch is so old - I don't think it will work with Switch Control. The only thing you might try is seeing if it will work without the driver installed. Intellitools is meant to be used with Discover Envoy and it just may be that if you try it without the software, it might work.
    Don't get your hopes up though. If you'd like me to recommend some switches that I know work with Switch Control, let me know.

  • Using stored procedures with dabasae controls

    Hi. We have two questions.
    Answer 1:
    We are working with Sybase and we are trying to use stored procedures (SP) with databse controls but we don't know how to obtain SP's return. We can to use SP normally if that SP don't have any return. Next example works fine but "stored_procedure_name" actually returns an number (error code) and we need to obtain it:
    * @jc:sql statement="{call stored_procedure_name (?)}"
    Answer 2:
    Do you know how to call SP dinamically? This mean to call an sql statemente where stored_procedure_name and its parameters could be pased as paremeters. That looks as:
    * @jc:sql statement="{call {sql: spName} {sql: listOfParameters}}"
    Thak you very much for your comments.
    Regards.

    I have my entity manager setup in a singleton.
    I'm finding it's costly to generate the emf, but if I don't close the em (enitity manager) and emf (entity manager factory) my open cursor count climbs until I exceed the max number of open cursors on the database (11g RAC)
    I'm committing the connection, and uow, and closing the em at the end of each call.
    But until I close the emf, the open cursors aren't released.
    TransactionhistoryPkg tranPkg = new TransactionhistoryPkg(conn); //Class created over database package via JPublisher
    tranPkg.transactionhistoryInsSp(insertTrans.getCardId()); // executes db package
    tranPkg.closeConnection();
    conn.commit();
    uow.commit();
    uow.getAccessor().decrementCallCount();
    em.close();
    Am I missing something really obvious here??
    btw - I found this link helpful in troubleshooting the max cursors issue: https://support.bea.com/application_content/product_portlets/support_patterns/wls/InvestigatingORA-1000MaximumOpenCursorsExceededPattern.html

Maybe you are looking for