Coveflow very slow with Windows Vista

Salut à tous
Avant je n'ai jamais eu de probleme avec Itunes mais après un formatage et avoir remis mes chansons, les coveflows étaient rapide.
Mais maintenant c'est lent pourtant mon pc est très puissant donc ca ne peux pas venir de la
que faire ?
Hello everybody
Before I never had problem with Itunes and coverflow had perfect but after a formatting and to have given my songs, the coveflows are very slow
my PC is very powerful and that cannot come from
what to make?
hanks

The Windows SP2 pre installed is the problem... I have an Equiumn A60, when I bought I noticed it takes too much time to load the windows xp.. so I formatted the hard disk and I've installed the Windows XP professional SP1, now it's two times faster to load and operate than before...
Try to install another windows, professional and SP1 You'll see the diference, and do not worry about the drivers , the windows installs all the drivers itself...
sorry for my english guys
[Edited by: admin]

Similar Messages

HP LaserJet P1006 Print very slow with Windows 8.1

I have an HP LaserJet 1006 that is installed on Toshiba Laptop running Windows 8.1 and was working fine even from time to time it stop working at all, then I have to remove the software and then reinstall it again and then it works fine, last time I downloaded the Windows 8.1 Driver for the printer.
But this time, first I tried to remove the software but it didn't work; the printer still show up on the control panel - Devices and Printers. then some how I was able to reinstall the software , after that the printer is working but printing very slow even it is a LaserJet printer.
Please any one can help with that?
Thanks;
Waleed;

Hey @wmowafi,
Welcome to the HP Support Forums!
I understand that you're experiencing a slow printing issue on Windows 8.1 when printing to your HP Laserjet P1006 Printer. I would like to work with you today at resolving this issue. Now the only driver available for your product on Windows 8.1 is a hostbased plug and play basic generic driver. Therefore, there is limitations for what can be done for troubleshooting. As you stated, you have already attempted an uninstalled and reinstalled of the driver to no avail. I'm going to suggest some further steps and tools to resolve this issue for you.
Step 1: Uninstall Your Printer:
Disconnect your USB cable
Click the following link: Fix problems that programs cannot be installed or uninstalled to access the Microsoft Uninstall Tool.
Once the website opens, select Run Now on the right hand side
Allow the Tool to run.
When prompted choose Uninstall
A list of programs should populate and you're looking for the Laserjet. It may appear as LJ P1000 series. Please select the Laserjet series and Uninstall it.
If the Laserjet doesn't show in the list of programs than your Windows 8.1 computer does not see the Laserjet driver as properly installed.
Step 2: Clear the Temp Files:
Launch your Start screen by right clicking on the Windows icon on the bottom left of your screen or by select the Windows button on your keyboard located to the right of the Ctrl button.
Once the Start screen launches, type the word Run
Click on Run to launch it
In the Run box type %temp% and select OK
Once the Temp folder opens, hold down Ctrl + A at the same time on your keyboard and everything will highlight in the folder. Select 'Delete' on your keyboard. Don't worry, no files or folders on your actual computer will be removed during this process. If a file is still be used on your computer you will get a pop up to 'skip' the file
Once the Temp folder is emptied of its files, close the window
On your Desktop, right click on the Recycling Bin and left click on 'Empty Recycling Bin'
Restart you computer
Step 3: Reinstall the Laserjet P1006:
Please keep your USB cable disconnected
Click on the following link: HP LaserJet P1000-P1500 Hostbased Plug and Play Basic Driver
The driver page for your product will now launch
Select Download and allow the download to Run
Once the download is complete an extraction will automatically run and once completed the installer will launch
Run through the step-by-step on screen instructions.
Please do not plug in your USB cable until prompted
Ensure that your USB cable is plugged in from the rear of the printer directly to the computer. Avoid extenders or docking stations as they can cause printing and communication issues.
Test printing!
Please let me know if the steps I've provided resolve your issue. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Java 2D very slow with Windows XP

Hi all!
I'm writing an isometric game engine using Java 2D API, in full-screen exclusive mode and using all the advantages of the new VolatileImage class. The engine is almost finished, I'm testing it putting some animated players on screen and showing the frame rate of the engine. Everything went right, frame rate was very high in Linux and Windows 98/Me. But when I try to run the engine on Windows XP I can only get 5 or 6 fps!!!! And I don't know why!! It seems that XP makes Java run very slow... at least when using Java2D...
Please, anyone knows why the performance is reduced??? Is there a new JRE release for Windows XP?? I'm using JDK 1.4.1.
Thanks for your help.

If you're using the Fullscreen API, then you're using BufferStrategy, thus you shouldn't use VolatileImages, it does this for you in the background. You shouldn't create any buffers, simply use the one provided. I'm assuming your problem probably lies in transparency. I've made an isometric engine using the fullscreen API that has run with complete 60fps page flipping. I would assume your bottle-neck lies in:
Transparencys (These are very slow, there is a way to make a bitmask, much like you'd do in DirectX)
Dynamic Memory allocation/Alpha rendering in your animation loop. (You need to allocate ALL of the colors you're going to use, and avoid using an alpha component if you want to avoid the VM getting bogged down by the garbage collector because you're allocating 30 Color objects a second).
I made a Color object that was some what hacked together that has methods to allow you to access it's values for doing this kind of thing, allocating your scheme before hand is an easier approach.
The method that performs the page flipping is a BLOCKING method, so you should orient your drawing before it, and not assume it's simply placing a request, like repaint does.
-Jason Thomas.

Equium A60 very slow with Windows XP SP 2

This Toshiba unit boots very very slow it takes ages to getit booted yes got a software firewall installed but it can't be correct that it takes really ages to boot a laptop like this one. I have searced here for some updates but I have not really found anything. Is there any known issue with windows xp and sp 2 for this laptop?
Do you have any adviecs?
Regards
Matts

The Windows SP2 pre installed is the problem... I have an Equiumn A60, when I bought I noticed it takes too much time to load the windows xp.. so I formatted the hard disk and I've installed the Windows XP professional SP1, now it's two times faster to load and operate than before...
Try to install another windows, professional and SP1 You'll see the diference, and do not worry about the drivers , the windows installs all the drivers itself...
sorry for my english guys
[Edited by: admin]

SAP Client is very slow with windows 8 Pro 64 bit

Dear All,
I'm currently using Win8 Pro 64bit OS and SAP 7.30 PL3 am facing a slow performance compared to my old Win 7 system with 7.20,
Actually i upgraded one of my users OS with Win8 ( previously it was Win7 32 bit ) after that SAP started giving issues i tried 7.20 with PL 14 and 7.30 with PL 3 but both are hanging while the time of login...... means after entering my credentials it will take more than one min for loading my data. In the same time other windows 7 systems with 7.20 pl 10 is taking maximum of 2 sec for loading the data, using the same credentials.

Hello Nikhil.
Can you see here?
MAIN MODULE INFORMATION:
   SAP GUI for Windows
   SAP Logon Pad for Windows
   730 Final Release
   7300.1.0.1074
   1337608
SYSTEM INFORMATION:
   Operating system: Windows 8 Pro 6.2 (9200)
You are using patch 0 for Windows 8
Windows 8 is not supported until patch 1 or higher is applied, and for Windows 8.1, you must use
Patch 7 or higher,.
Apart from that the error is not from the GUI side,
See below:
Previous frontend interpretation time   :           109 ms
Previous server response time           :          5078 ms (for 1 roundtrips)
The frontend interpretation time is only 100 ms whereas the server time has taken 5000 ms
Please use a supported version for the OS you intend to use.
You can find this information in note
http://service.sap.com/sap/support/notes/66971
Jude

Lenovo g780 is very slow with Windows 7

Hello all forum users, please help me with my big problem.
I have Lenovo g780 from 3 months. I`m really supprised, becouse i have the best version (model 20138) and for me is really slow. When i boot up it takes more like 5 min. Looking for wirless more like 3 min. I reinstalled windows and update all drivers from lenovo site but is still this same. Please help me somehow.
Procesor: Intel(R) Core(TM) i7-3632QM CPU @ 2.20Ghz
RAM 16 GB
HD- 1TB

Hi Anomus,
I’m sorry to hear that the issue persists even after performing OSRI (Operating System Re-Install), this confirms that this might be hardware related. I would Strongly Suggest Calling Technical Support for Assistance to get the details of nearest Authorized Service Center to get the issue analyzed.
Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
Do post us back for further queries.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

My macbook pro is running very slow with some strange mouse and window movements. The trackpad is very unresponsive and when responding the cursor moves on its own and/or very erratically. When on safari the window suddenly zooms in or highlights words.

My macbook pro is running very slow with some strange mouse and window movements. The trackpad is very unresponsive and when responding the cursor moves on its own and/or very erratically. When on safari the window suddenly zooms in or highlights words and looks them up via dictionary. I currently have a wireless mouse connected and I am still having the same problems.
I fee like I may have a virus or my laptop is perhaps being accessed remotely. All of the sharing options are unchecked.
HELP PLEASE
Very worried!!

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
     after the chime press and hold down the OPTION key until the boot manager screen appears.
     Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
     Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

Does FireFox work with Windows Vista?

Question is not about the machine I'm using right now - so I haven't opened the "troubleshooting" window. The question is regarding my wife's old Vaio laptop with Windows Vista OS. It browses very slowly. We may want to use FireFox and possibly speed browsing. Uses Chrome now and will want to migrate tabs and favorites (etc).
Is this possible and might it make the system a little faster?

Hi,
Seems like your slowness issues may caused by malware. Do a malware check with some malware scanning programs on the Windows computer. 
Please scan with all programs because each program detects different malware. 
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page: http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
All of your bookmarks will be transferred over during the initial launch of Firefox after installation.

Captivate is not compatible with Windows Vista RTM

I can confirm that Captivate 2 is not compatible with Windows
Vista (RTM Final MSDN). I have been testing it on several systems
with various versions of Vista. It had partial success with RC2,
but with RTM it crashes quite frequently (when vista is drawing new
windows). I can't tell however if captivate is directly responsible
or if it is perhaps an incompatible version of Flash (current using
latest version 9 beta) that is to blame. However, since Vista is at
RTM then I would say that it is now the responsibility of Adobe to
fix the compatibility issues with a new update. Technically vista
is not due to domestic market until january 07, however businesses
will be able to purchase vista in only two weeks, and as Captivate
is generally used for business/training use i would certainly think
that it should be of high importance that these issues are
resolved.
Can anyone else comment on their experiences with Captivate
and Vista?

Hi cptv8
I appreciate your taking the time to report back your
findings about Vista. Perhaps it will be helpful to those that are
early adopters.
You stated:
Technically vista is not due to domestic market until january
07, however businesses will be able to purchase vista in only two
weeks, and as Captivate is generally used for business/training use
i would certainly think that it should be of high importance that
these issues are resolved.
You have a valid point. However, you are making it in the
wrong venue. How? Well, Adobe doesn't normally make it a habit of
visiting the peer-to-peer support forums. This means users
supporting users. If you are concerned that Adobe is aware of this
issue, you should really consider using a different channel. The
Wish Form. And you can easily get there by simply
clicking
here.
Now I don't claim to be a guru of anything in particular, but
it seems to me that businesses are very slow to adopt things. They
tend to take a very pragmatic and slow approach. Many are just now
making the leap to XP! So I'm guessing that Vista will be slow to
gain ground. I'm also confident that the Captivate team is well
aware of the Vista issues and will be addressing them as best they
can.
Sincerely... Rick

Ipod touch with windows vista

Hi,Im looking into geting the ipod touch,but I have read that the ipod touch does not work well with windows vista. I know the new itunes 7.5 just came out. Has that version fixed the problems with the ipod? Also what are the problems the ipod touch is haveing with vista. I have windows vista 32 bit OS. Thank you very much for your help.

Hey, yeah I have major problems syncing to Vista. The album artwork is assigned to the wrong songs or sometimes a chunk of the picture is not in the right place, some of my songs stop half way through the song then the iPod skips to the next song on the list. My movies periodically decide to crash and the only way to get past these spots is to skip ahead (which is very difficult on the iPod touch especially when the movie is long cause you dont want to miss too much) but yeah just letting you know that there ARE some issues with it not saying that yours will do the same but it might.

TS1717 Trying to download iTunes onto PC installed with windows vista. Download keeps getting to 99% with 1 second remaining and then freezes / does nothing? Any help appreciated.

Trying to download itunes onto PC installed with windows vista. Download keeps getting to 99% with 1 second remaining and then freezes / does nothing? Any help appreciated.

I solved the problem! The updates orignally were downloaded to the C: drive of the server. I've since moved them to the E: drive and for some reason the Content folder in IIS didn't change the file path to the new WSUScontent folder.
The root cause for this was failing to use the UTILITY designed for this very purpose.
I edited the virtual directory settings in IIS and was able to put the correct path in.
You still need to use the UTILITY.. to fix all the other stuff you're still missing.
In the %ProgramFiles%\Update Services\Tools folder...
WSUSUTIL MOVECONTENT E:\WSUS E:\WSUS\MoveContent.LOG -SKIPCOPY
This problem was caused by moving the WSUS updates to a different local drive.
No. This problem was caused by IMPROPERLY moving the WSUS updates to a different local drive.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Install disk doesn't work with Windows Vista

I just bought a new HP Color LaserJet Pro MFP M277dw and the install disk isn't compatible with Windows Vista. Apparently there's no ful feature option for Windows Vista on an HP laptop. After several hours of work I downloaded several drivers and got the printer to print, but the scan function doesn't work that well without the HP software which hasn't been created for Windows Vista.

I am having a very similar problem but do not have an answer either. I am running an X61 Type 7676A12 with a Lenovo ACP50 port replicator FRU part number 40Y8160. I am running Windows XP Pro. The port replicator has never been very great and would not restore the external monitor picture properly when the laptop had been in sleep mode however it was serviceable if not optimal. After downloading and installing the October MS security updates the machine would get a BSOD when the port replicator was plugged in. Remove the replicator and reboot and it worked ok. Plug it in again and BSOD. I tried upgrading the drivers from 5.1.4a to 7.1.1.03Aug07 and then to 7.1.2. No go. Emailing Targus with the problem got no response. The port replicator is now relegated to my junk heap of useless rubbish.

EBS WITH WINDOWS VISTA

I would like to know if somebody already has a solution to have access the EBS 11.5.10.2 saw to browser IE 7 with Windows Vista.
Some notebooks of users (customer) has windows vista installed and it does not have access.
Grateful
Douglas

Hi
That is unfortunate and may now be dated. I recently bought a laptop with Windows Vista Premium as OS. At work, I did try to logon wirelessly to apps server. I could logon to the applications. But when the applet starts running, IE7 tried to download the JInitiator and it took a very long time to complete. Thinking it is in hung state and going nowhere, I closed the window and downloaded JInitiator from OTN. Installed it and then tried accessing apps. No luck. The browser restarts and goes back to the browser's default home page. The same happened with Firefox 2.0 also.
Finally, I tried Netscape browser 8.1 and after prolonged patient waiting, it worked. But did not work in IE7 and Firefox 2.0. I suspect it may be something to do with the firewall settings. I am now planning on uninstalling Firefox 2.0 and reinstalling it.
Bottomline, I could access apps via the applet using Netscape browser 8

Protools 8 compatiblity with Windows Vista and which proper audio interface?

O K i have a compaq presario pc notebook with a cpu of 2.16 ghz and 160 gb(?) hard drive with 32 bit w/ Window Vista service pack 1. I've done a little research and it seems my computer may be compatible but i'm not sure Is ne one using pt 8 with windows vista with no problems? also i'm not so sure about which audio interface i should be using psi, firewire,or usb even though i have 2 usb ports im hearing its not the best choice dealing with latency and all. Is ne one using pt 8 with window vista using a usb audio interface or even firewire with any problems? thanx hope to hear from you soon!!!!

Hi again chamille2010,
Well my take would be that your rig would run Pro Tools 8 but you might struggle with the latency a bit. I ran Pro Tools LE on a PC (with significantly lower specs than yours since it was 3 years old at the time) with a Digi 002 as my firewire interface and I did have issues with latency, which is my biggest pet peeve. That was also on the XP Operating System so you might be better off with Vista SP1. I would recommend going with the Digi 003 via firewire and maxing out your RAM for best results. USB would definitely be slower and might be a cause for latency if you run into it.
That's my opinion. Digidesign has a pretty in-depth site for making sure your system will run Pro Tools. I'm sure you've already checked it out but just in case:
http://www.digidesign.com/index.cfm?langid=100&navid=54&itemid=23954

Bootcamp with Windows Vista

Does installing bootcamp with Windows Vista significantly slow down a mac with a noticeable difference? I have a pretty new mac and am thinking about using this function. Does it make more sense to install windows xp? And what is a good amount of space to leave for the windows side to have?

Does installing bootcamp with Windows Vista significantly >slow down a mac with a noticeable difference?
What do you mean by this? Slows down the whole system? Or the performance of windows?; since you mentioned XP on your later question.
I have tried both windows (vista & xp) on a macbook, and for performance, xp is faster.
as for the whole system (macosX & windows) no diffrence in boot up and speed
as for partition size of windows... that would depend on you whether your mp3, pics, videos would be used on windows or mac... mine is 20gb with no problem

Coveflow very slow with Windows Vista

Similar Messages

Maybe you are looking for