Cover Art All Screwed Up
I recently had to restore my Ipod classic as it was not sending play counts back to Itunes... that problem is now fixed, but I have another. Much of the cover art is now missing when I play tracks on my Ipod, and what there is is now all jumbled up. (By which I mean.. the art is for tracks I do have, but they are all assigned to the wrong artists.)
I have synched 8000+ tracks - all in mp3 format with the correct cover art embedded in the original files.
So, my question is, can I force Itunes / my Ipod to recheck the artwork either from the mp3 files themselves (ideally, as I know they are correct)or failing thta, from Apples database. i don't really want to restore again if I can avoid it.
Thanks in advance,
Matt
Sometimes the artwork cache becomes corrupt and fails to show correct artwork, even when this is properly set up in iTunes. To rebuild the artwork cache, connect your iPod to iTunes. Locate the iPod in the Sources pane on the left-hand side, then select the Music tab. Remove the tick from *Display album artwork on your iPod*, sync the iPod, reselect the option & sync again.
tt2
Similar Messages
-
Hello, I am trying to use a photo,that I've opened up in pages on a blank landscape, taken from my camera roll and use it as album cover art. All the custom text's will not paste when I copy. Pic and texts are saved as a PDF, how can I paste the doc ?
Hello, I am trying to use a photo,that I've opened up in pages on a blank landscape, taken from my camera roll and use it as album cover art. All the custom text's will not paste when I copy. Pic and texts are saved as a PDF, how can I paste the doc ?
-
On itunes on my computer I took the time to sort my songs put them by the correct artists and albums and got all the cover art for it but when i go to put it that way on my iPod it doesn't work that way? Why is it showing multiple albums for the same album and no cover art for some albums and unknown artists for the artist? It says differently on Itunes on my computer.
Hi adtsalmon,
You can only watch the movie on the device you rented it on. Here's a snippet from the Apple Support site (italics mine):
If you download a rented movie on your computer: You can transfer it to a device such as your Apple TV (1st generation), iPhone, iPad, or iPod if it’s a standard-definition film (movies in HD can only be watched on your computer, iPad, iPhone 4 or later, iPod touch (4th generation or later), or Apple TV). Once you move the movie from your computer to a device, the movie will disappear from your computer's iTunes library. You can move the movie between devices as many times as you wish during the rental period, but the movie can only exist on one device at a time.
If you download a rented movie on your iPhone 4 or later, iPad, iPod touch (4th generation or later), or Apple TV: It is not transferable to any other device or computer.
Here's the link to the Movie Rentals FAQs site FYI:
http://support.apple.com/kb/HT1657
Hope this helps!
Cheers,
GB -
I click on one song and another one starts playing. Cover art for one artist shows up on another album. All of my music isn't showing up. Please help. Why is this happening? How can I fix it?
Sorry for not getting back with you...
That moves only the iTunes media, not the iTunes library (which is really kinda nebulous).
iTunes library = iTunes folder and all the media, wherever it is located.
The /Music/iTunes/ folder contains the iTunes library.itl file, which keeps track of everything in iTunes.
I do however still have the original MAIN startup drive still in the computer, it's just not the startup.
This is good you still have it.
Try this...
Hold Option and launch iTunes.
Select Choose library... and select the /iTunes/ folder on the original drive. It should be in /Users/your_user_name/Music/.
Don't mess with anything. We can get it cleared up.
Does everything work okay? -
I updated to 1.0.2 and all my album cover art disappeared
i've tried several times now to reset it by telling it not to show cover art, syncing, then telling it to show it and syncing again. however, unlike in the past (with 1.0.1) it hasn't worked. I'd reset the whole thing, but it took me about a week to get my 90gb collection into my ipod with my beat up old laptop, and I can't be sure it'll make it through that again.
Message was edited by: krmagleyIt is not supposed to swtich off when you close the cover. It is supposed to go to sleep. Check Settings>General>Lock/Unlock>On. If the iPad is already set up that way, try resetting the device and see if that fixes it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
You can also try resetting all settings. You will not lose any data, but most of the device settings will have to be entered in the settings app again. Settings>General>Reset>Reset all Settings. -
Hi I have some albums on my iPhone. In iTunes the albums show different cover arts, however in my iPhone all albums got the same cover art from one of the other albums
How can I get the cover arts working as they should? Everything worked just fine till I added two new albums yesterdaySomehow the database has become corrupted. This can happen when unplugging the phone while it is still syncing or being accessed by your computer.
You will have to remove all music from the phone and the resync it once more. That's the only way to fix the artwork.
I've had to do this a few times on my iPod Classic and the only way to fix it was to remove the music then resync. -
Plus, some of the cover art is mixed up and some of the covers have even been replaced with combinations of multiple albums. And every once in a while, a song will play on its own, without me pressing play, and it skips as if I'm holding the forward button. This iPod is only a few months old so I'm really worried! This just started today after I had it plugged into my computer and synced it. It might have been caused by a tree that fell and knocked out the power in our area while the iPod was plugged in. Can someone please tell me how to fix it? Would taking it into an Apple store help?
Hello Philly,
I believe that when you reset your ipod(command given from the computer, right?) touch WHILE the ipod was updating, It cleared the system in the middle of writing files, thus corrupting(equivalent of cutting of in the middle of a sentence) the basic running system.
I suggest you go to an apple store and ask for a technical diagonosis in person. they may offer to help if the problem is fixable. If your ipod is still under warrenty, i would guess it would be free/low cost.
~Remember, I am just giving an educated guess on limited information -
Problems concerning sonata playlists and freevo cover art
Hi!
I'm setting up a media center PC and I'm having some problems with the playlists created by sonata. Another problem I have is not getting freevo to download cover art.
First: When ever I try to make a playlist through the "Current" tab in Sonata it creates a m3u file with every song that's listed in the current window. I'm used to being able to pick one or a couple of songs and then adding it a specified playlist. Is this impossible in sonata? And if I try to play the m3u file created (the one with every song listed) through freevo I get a message that the directory is empty. What am I doing wrong??
Second: I'm having big problems getting freevo to download cover art to my music. I can download info on movies from imdb, but info for the music doesn't work. I store the cover art downloaded by sonata in the different album folders and these covers show up in freevo. But if I have to play every new song i download first in sonata to get the cover art working in freevo I'll go crazy. It's supposed to work the same way in freevo as in sonata isn't it???
It also seems that mplayer can't play m3u files. Using the mentioned sonata made m3u file in mplayer does nothing. Mplayer starts but nothing happens.
My goal is to be able to make playlists through sonata and then play these lists using freevo. I don't want to get up from the couch.
Here's my local_conf.py:
# -*- coding: iso-8859-1 -*-
# local_conf.py - System configuration
# $Id: local_conf.py.example 10508 2008-03-12 07:24:34Z duncan $
# Notes:
# This file contains your freevo settings, overriding the settings in
# freevo_config.py. freevo_config.py, which is usually installed in
# /usr/share/freevo, contains all the core settings. To change the settings copy
# this file to ~/.freevo/local_conf.py or /etc/freevo/local_conf.py
# It does not contain all the possible settings that you can change, see
# freevo_config.py for all the possible settings. Also it does not contain
# settings for the plug-ins, plug-ins contain their configuration information and
# the can be listed with:
# | freevo plugins -l
# and the settings can se shown with
# | freevo plugins -i <name of plug-in>
# E.g.: when you want a alsa as mplayer audio out, just put in local_conf.py:
# | MPLAYER_AO_DEV = 'alsa9'
# The vertical line indicates code.
# This is no normal config file, it's Python code. Because of that, you
# need to follow some rules to avoid crashes. The examples should explain
# the settings, but make sure a line starting with a variable has NO SPACES OR
# TABS at the beginning.
# Freevo - A Home Theater PC framework
# Copyright (C) 2002 Krister Lagerstrom, et al.
# Please see the file freevo/Docs/CREDITS for a complete list of authors.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of MER-
# CHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
# Public License for more details.
# You should have received a copy of the GNU General Public License along
# with this program; if not, write to the Free Software Foundation, Inc.,
# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
CONFIG_VERSION = 5.23
# ======================================================================
# General freevo settings:
# ======================================================================
# LOCALE='iso-8859-15'
# AUDIO_DEVICE = '/dev/dsp' # e.g.: /dev/dsp0, /dev/audio, /dev/alsa/?
# AUDIO_INPUT_DEVICE = '/dev/dsp1' # e.g.: /dev/dsp0, /dev/audio, /dev/alsa/?
# MIXER_MAJOR_CTRL = 'VOL' # Freevo takes control over one audio ctrl
# 'VOL', 'PCM' 'OGAIN' etc.
# MIXER_MAJOR_MUTE_CTRL = 'PCM' # used in alsamixer.py There are systems where
# volume and mute use different controls
# MIXER_DEVICE = '/dev/mixer' # mixer device
# MIXER_CONTROL_ALL = 1 # Should Freevo take complete control of audio
# MIXER_VOLUME_MAX = 90 # Set what you want maximum volume level to be.
# MIXER_VOLUME_DEFAULT = 40 # Set default volume level.
# MIXER_VOLUME_TV_IN = 60 # Set this to your preferred level 0-100.
# MIXER_VOLUME_VCR_IN = 90 # If you use different input from TV
# MIXER_VOLUME_RADIO_IN = 80 # Set this to your preferred level 0-100.
START_FULLSCREEN_X = 1 # Start in fullscreen mode if using x11 or xv.
# SYS_SHUTDOWN_CONFIRM = 1 # ask before shutdown
# Physical ROM drives, multiple ones can be specified
# by adding comma-seperated and quoted entries.
# Format [ ('mountdir1', 'devicename1', 'displayed name1'),
# ('mountdir2', 'devicename2', 'displayed name2'), ...]
# Set to None to autodetect drives in during startup from /etc/fstab,
# set to [] to disable rom drive support at all
# ROM_DRIVES = None
# Hide discs from the wrong menu (e.g. VCDs in audio menu) and empty discs.
HIDE_UNUSABLE_DISCS = 1
# Attempt to set the speed of the ROM drive. A good value for keeping the
# drive silent while playing movies is 8.
# ROM_SPEED = 0
# Perform a whole system shutdown at SHUTDOWN! Useful for standalone boxes.
# SYS_SHUTDOWN_ENABLE = 0
# Command to execute to shutdown the system
# SYS_SHUTDOWN_CMD = "sudo shutdown -h now"
# SYS_RESTART_CMD = "sudo shutdown -r now"
# ======================================================================
# AUTOSHUTDOWN CONFIGURATION
# ======================================================================
# replace the default shutdown plugin
# plugin.remove('shutdown')
# plugin.activate('autoshutdown', level=90)
# activate the timer
# plugin.activate('autoshutdown.autoshutdowntimer')
# -- autoshutdown menu item configuration --
# SYS_SHUTDOWN_CONFIRM
# Set to True to popup dialog boxes for confirmation.
# this applies to menu items only.
# AUTOSHUTDOWN_CONFIRM = True
# -- autoshutdown timer configuration --
# TIMER_TIMEOUT
# Set the timeout in minutes after which the system
# is shutdown. The allowed idle time and the running
# processes (see below) are evaluated to determine if
# a shutdown is allowed. Menu navigation in freevo will
# reset the timer.
# AUTOSHUTDOWN_TIMER_TIMEOUT=30
# -- autoshutdown behaviour configuration --
# PRETEND
# Set to True to disable the actual shutdown command.
# AUTOSHUTDOWN_PRETEND = False
# PROCESS_LIST
# List the processes that will prevent an automatic
# shutdown. If there are important programs that
# should not be interrupted, then add them to this
# list. Set to None if a shutdown is always allowed.
# AUTOSHUTDOWN_PROCESS_LIST = [
# 'emerge',
# 'tvgids',
# 'transcode',
# 'cdrecord',
# 'mplayer',
# 'top'
# DEFAULT_WAKEUP_TIME
# Set the default time at which to wakeup if there
# are no recordings scheduled. The time is specified
# in localtime 24 hour format. Set to None to disable
# default wakeup time.
# AUTOSHUTDOWN_DEFAULT_WAKEUP_TIME = "13:00"
# FORCE_DEFAULT_WAKEUP
# Set to True to always wakeup at the default wakeup
# time. Set to False to only wakeup at the default
# wakeup time when no recordings are scheduled.
# AUTOSHUTDOWN_FORCE_DEFAULT_WAKEUP = True
# ALLOWED_IDLE_TIME
# The number of minutes that may be spent idle until
# the next scheduled recording or default wakeup. That
# is, if the gap between "now" and the next recording
# or default wakeup is less than the allowed idle time
# then a shutdown is not performed but the system is
# left running. If the period from now to the next
# recording or default wakeup is more than the allowed
# idle time, then the system is shut down and a wakeup
# is scheduled. Use this to minimize the number of
# shutdown/boot sequences when many short programs are
# recorded in a short period of time. Note that this
# variable is used by both the timer and the menu.
# AUTOSHUTDOWN_ALLOWED_IDLE_TIME = 45
# -- Choice of wakeup method
# The wakeup can be done via acpi-alarm or nvram-wakeup.
# AUTOSHUTDOWN_METHOD = 'acpi'
# AUTOSHUTDOWN_METHOD = 'nvram'
# -- autoshutdown acpi-alarm configuration
# This method uses the wakeup on alarm function that most BIOSs have.
# The wakeup time is set by a simple
# "echo 2004-08-02 20:15:00 >/proc/acpi/alarm"
# On most mainbords you will have to ENABLE "Wake on Timer", "Resume on Alarm",
# "RTC Alarm Resume" or similar things for the acpi wakeup method to work.
# If you want to use acpi, you need to create a small script:
# !/bin/sh
# echo "$1" >/proc/acpi/alarm
# You have to be root or use sudo for this to work.
# AUTOSHUTDOWN_WAKEUP_CMD = sudo /PATH/TO/set_acpi.sh
# -- autoshutdown nvram-wakeup configuration --
# The nvram-wakeup utility is used to write the
# wakeup alarm to the RTC in bios. Read the
# nvram-wakeup documentation about this topic,
# a working nvram-wakeup configuration is needed.
# WAKEUP_CMD / NVRAM_OPT
# Path to nvram-wakeup and options. Options can
# be used to specify a config file.
# AUTOSHUTDOWN_WAKEUP_CMD = "/usr/bin/nvram-wakeup"
# AUTOSHUTDOWN_NVRAM_OPT = "--syslog"
# WAKEUP_NEEDS_REBOOT
# Set to True if the bios needs a reboot to catch
# up with the rtc alarm that nvram-wakeup sets. The
# boot loader options should be set too. Read the
# nvram-wakeup documentation about this topic.
# AUTOSHUTDOWN_BIOS_NEEDS_REBOOT = True
# -- if the bios needs a reboot --
# BOOT_LOADER
# Set to "GRUB" or "LILO" Only needed if bios needs
# a reboot to initialize the RTC wakeup call.
# AUTOSHUTDOWN_BOOT_LOADER = "GRUB"
# REMOUNT_BOOT_CMD / REMOUNT_BOOT_OPT
# Grub needs to write to /boot/grub/grub.conf. Set
# the command and options to remount the /boot
# partition writeable. Set to None if this is not
# needed.
# AUTOSHUTDOWN_REMOUNT_BOOT_CMD = "/bin/mount"
# AUTOSHUTDOWN_REMOUNT_BOOT_OPT = "/boot -o remount,rw"
# GRUB_CMD / GRUB_OPT
# Grub-set-default command and options that will
# reboot and poweroff the system.
# AUTOSHUTDOWN_GRUB_CMD = "/sbin/grub-set-default 0"
# AUTOSHUTDOWN_GRUB_OPT = "0"
# LILO_CMD / LILO_OPT
# Lilo command with options that will reboot and
# poweroff the system.
# AUTOSHUTDOWN_LILO_CMD = "/sbin/lilo"
# AUTOSHUTDOWN_LILO_OPT = "-R PowerOff"
# ======================================================================
# Events
# ======================================================================
# You can add more keybindings by adding them to the correct hash.
# e.g. If you want to send 'contrast -100' to mplayer by pressing the '1' key,
# just add the following line:
# EVENTS['video']['1'] = Event(VIDEO_SEND_MPLAYER_CMD, arg='contrast -100')
# See src/event.py for a list of all possible events.
# Some events to jump to menus
# EVENTS['menu']['GUIDE'] = Event(MENU_GOTO_TVGUIDE) # Not working
# EVENTS['menu']['VIDEOS'] = Event(MENU_GOTO_VIDEOS)
# EVENTS['menu']['MUSIC'] = Event(MENU_GOTO_MUSIC)
# EVENTS['menu']['PICTURES'] = Event(MENU_GOTO_IMAGES)
# EVENTS['menu']['GAMES'] = Event(MENU_GOTO_GAMES)
# EVENTS['menu']['RADIO'] = Event(MENU_GOTO_RADIO) # Not working
# EVENTS['menu']['POWER'] = Event(MENU_GOTO_SHUTDOWN)
# Use arrow keys for back and select (alternate way of navigating)
# MENU_ARROW_NAVIGATION = False
# Process keyboard events from SDL. You want this unless you use only lirc
# or event devices below.
# USE_SDL_KEYBOARD = True
# Keymap to map keyboard keys to event strings. You can also add new keys
# here, e.g. KEYMAP[key.K_x] = 'SUBTITLE'. The K_-names are defined by pygame.
# List of /dev/input/event# devices to monitor. You can specify either the
# device node (e.g. '/dev/input/event1') or the name of the device (e.g.
# 'ATI Remote Wonder II'). If you monitor your keyboard both here and with
# USE_SDL_KEYBOARD, then you will get duplicate events.
EVENT_DEVS = []
# Keymap to map input events to event strings. You can change current mappings
# and add new ones here, e.g. EVENTMAP['KEY_COFFEE'] = 'SUBTITLE'. Key names
# are defined by the Linux input layer (input.h). An axis is described by a
# pair, one for positive and one for negative movement, e.g.
# EVENTMAP['REL_Z'] = ('LEFT', 'RIGHT')
# Use Internet resources to fetch information?
# For example, Freevo can use CDDB for album information,
# the IMDB movie database for movie info, and Amazon for cover searches.
# Set this to 0 if your computer isn't connected to a network.
USE_NETWORK = 1
# Directory location to save files when the normal filesystem
# doesn't allow saving. This directory can save covers and fxd files
# for read only filesystems like ROM drives. Set this variable to your
# old MOVIE_DATA_DIR if you have one. It needs to be set to a directory
# Freevo can write to.
# OVERLAY_DIR = os.path.join(FREEVO_CACHEDIR, 'vfs')
# Umask setting for all files.
# 022 means only the user has write access. If you share your Freevo
# installation with different users, set this to 002
# UMASK = 022
# Suffix for playlist files
PLAYLIST_SUFFIX = [ 'm3u' ]
# Use md5 in mmpython to create unique disc ids. Enable this if you have
# problems with different discs having the same id.
# MMPYTHON_CREATE_MD5_ID = 0
# Keep metadata in memory
# Setting this variable will keep all cache files in memory. Startup will be
# slower, but for large directories, this will speed up the display.
# 0 = Only keep current dir in memory. Use this if you have too much data
# and not enough RAM
# 1 = Once loaded, keep cachefile for directory in memory
# 2 = Load all cachefiles on startup
# WARNING: you should not run 'freevo cache' when freevo is running.
# MEDIAINFO_USE_MEMORY = 1
# Cache images. This uses a lot of disc space but it's a huge speed
# enhancement. The images will be cached in OVERLAY_DIR
CACHE_IMAGES = 1
# ======================================================================
# Plugins:
# ======================================================================
# Remove undesired plugins by setting plugin.remove(code).
# You can also use the name to remove a plugin. But if you do that,
# all instances of this plugin will be removed.
# Examples:
# plugin.remove(plugin_tv) or
# plugin.remove('tv') will remove the tv module from the main menu
# plugin.remove(rom_plugins['image']) will remove the rom drives from the
# image main menu,
# plugin.remove('rom_drives.rom_items') will remove the rom drives from all
# menus
# See freevo_config.py for a list of loaded plugins
plugin.remove('tv')
plugin.remove('headlines')
plugin.remove('idlebar.tv')
plugin.remove('idlebar.diskfree')
plugin.remove('file_ops')
plugin.remove('tv.generic_record')
plugin.remove('tv.view_recordings')
plugin.remove('tv.mplayer')
plugin.remove('tv.manual_record')
plugin.remove('tv.scheduled_recordings')
plugin.remove('tv.view_favorites')
plugin.remove('video.moviecovers')
# User setup
plugin.activate('audio.coversearch')
# plugin.activate('video.moviecovers')
plugin.activate('video.details')
# list of regexp to be ignored on a disc label
IMDB_REMOVE_FROM_LABEL = ('season[\._ -][0-9]+', 'disc[\._ -][0-9]+',
'd[\._ -][0-9]+', 'german')
# list of words to ignore when searching based on a filename
IMDB_REMOVE_FROM_SEARCHSTRING = ('the', 'a')
# When searching for a movie title in imdb, should the result be
# autoaccepted if it is only one hit?
# 0 = show menu even if it is only one hit (gives you an opportunity to cancel)
# 1 = autoaccept
IMDB_AUTOACCEPT_SINGLE_HIT = 1
SCREENSAVER_DELAY = 30 # of seconds to wait to start saver.
SCREENSAVER_CYCLE_TIME = 60 # of seconds to run a screensaver before starting another saver.
plugin.activate('screensaver')
# Use ivtv_record instead if you have an ivtv based card (PVR-250/350)
# and want freevo to do everthing for you. TV_SETTINGS must be set
# correctly. To use you need to set the following two lines:
# plugin.remove('tv.generic_record')
# plugin_record = plugin.activate('tv.ivtv_record')
# Enable this for joystick support:
# plugin.activate('joy')
# Headlines
# You are free to use any rss feeds in the HEADLINES_LOCATIONS below
# These are just working examples for the Freevo feeds.
# To turn off Headlines add plugin.remove('headlines')
# plugin.activate('headlines', level=45)
# HEADLINES_LOCATIONS = [
# ('Freevo news releases', 'http://sourceforge.net/export/rss2_projnews.php?group_id=46652'),
# ('Freevo file releases', 'http://sourceforge.net/export/rss2_projfiles.php?group_id=46652'),
# ('Freevo summary+stats', 'http://sourceforge.net/export/rss2_projsummary.php?group_id=46652'),
# ('Freevo donors', 'http://sourceforge.net/export/rss2_projdonors.php?group_id=46652'),
# CD Ripping
# CD_RIP_TMP_DIR = '/tmp/'
# CD_RIP_TMP_NAME = 'track_%(track)s_being_ripped'
# CD_RIP_PN_PREF = '%(artist)s/%(album)s/%(track)s - %(song)s'
# CD_RIP_CDPAR_OPTS = '-s'
# CD_RIP_LAME_OPTS = '--vbr-new -b 192 -h'
# CD_RIP_OGG_OPTS = '-m 128'
# CD_RIP_FLAC_OPTS = '-8'
# CD_RIP_CASE = None # Can be title, upper, lower
# CD_RIP_REPLACE_SPACE = None # Can be '_', '-', etc.
# CD Burning
# CDBURN_AUDIO_DAO = 1
# CDBURN_MKISOFS_PATH = '/usr/bin/mkisofs'
# CDBURN_CDRECORD_PATH = '/usr/bin/cdrecord'
# CDBURN_TEMP_DIR='/tmp/'
# CDBURN_DEV = '/dev/cdrom'
# CDBURN_SPEED = 32
# Re-encode
# This plug-in transcodes a video to a different format
# plugin.activate('video.reencode')
# REENCODE_CONTAINER = 'avi'
# REENCODE_RESOLUTION = 'Optimal'
# REENCODE_VIDEOCODEC = 'XviD'
# REENCODE_VIDEOBITRATE = 1000
# REENCODE_AUDIOCODEC = 'MPEG 1 Layer 3 (mp3)'
# REENCODE_AUDIOBITRATE = 128
# REENCODE_NUMPASSES = 1
# REENCODE_VIDEOFILTER = None
# Freevo Music Player Daemon
# http://www.musicpd.org/
# plugin.activate('mpd')
# Freevo Bluetooth Phone Settings
# This plugin uses The Python bindings for Bluez bluetooth stack.
# It can be downloaded from http://org.csail.mit.edu/pybluez/download.html
# or installed with the package manager of your operating system.
# To this plugin to work you need the j2me midlet installed in a compatible
# phone.
# plugin.activate('freevused')
# if RFCOMM port is already binded wait this seconds to retry binding
# FVUSED_BIND_TIMEOUT = 30
# Translation of commands from j2me client to events of Freevo
# FVUSED_CMDS = {
# 'PREV': 'UP', # 1st row left
# 'STRT': 'SELECT', # 1nd row center
# 'NEXT': 'DOWN', # 1st row right
# 'RWND': 'LEFT', # 2nd row left
# 'PAUS': 'PAUSE', # 2nd row center
# 'FFWD': 'RIGHT', # 2nd row right
# 'VOL-': 'MIXER_VOLDOWN', # 3rd row left
# 'STOP': 'EXIT', # 3rd row center
# 'VOL+': 'MIXER_VOLUP', # 3rd row right
# 'VOLM': 'MIXER_VOLMUTE', # 4th row left
# 'SLCT': 'ENTER', # 4th row center
# 'MAIN': 'MENU' # 4th row right
# Freevo Button Bar Plug-in
# plugin.activate('buttonbar')
# You'll also need to map the 'RED', 'GREEN', 'YELLOW'
# and 'BLUE' events to keys for example (don't use this
# it overrides some default keys)
# KEYMAP[key.K_F5] = 'RED'
# KEYMAP[key.K_F6] = 'GREEN' #Already mapped to record
# KEYMAP[key.K_F7] = 'YELLOW'
# KEYMAP[key.K_F8] = 'BLUE'
# Freevo Screensaver Plug-in
# SCREENSAVER_DELAY = 120 # of seconds to wait to start saver.
# SCREENSAVER_CYCLE_TIME = 60 # of seconds to run a screensaver before starting another saver.
# plugin.activate('screensaver')
# plugin.activate('screensaver.balls') # Bouncing balls all over the screen
# plugin.activate('screensaver.bouncing_freevo') # The freevo logo bouncing around the screen
# ======================================================================
# Freevo directory settings:
# ======================================================================
# You can change all this variables in the folder.fxd on a per folder
# basis
# Example:
# <freevo>
# <folder title="Title of the directory" img-cover="nice-cover.png">
# <setvar name="directory_autoplay_single_item" val="0"/>
# <info>
# <content>A small description of the directory</content>
# </info>
# </folder>
# </freevo>
# Should directories sorted by date instead of filename?
# 0 = No, always sort by filename.
# 1 = Yes, sort by date
# 2 = No, don't sory by date for normal directories,
# but sort by date for TV_RECORD_DIR.
DIRECTORY_SORT_BY_DATE = 0
# Should directory items be sorted in reverse order?
# DIRECTORY_REVERSE_SORT = 0
# Should we use "smart" sorting?
# Smart sorting ignores the word "The" in item names.
DIRECTORY_SMART_SORT = 1
# Should files in directories have smart names?
# This removes the first part of the names when identical
# DIRECTORY_SMART_NAMES = 1
# Should Freevo autoplay an item if only one item is in the directory?
DIRECTORY_AUTOPLAY_SINGLE_ITEM = 0
# Force the skin to use a specific layout number. -1 == no force. The layout
# toggle with DISPLAY will be disabled
# DIRECTORY_FORCE_SKIN_LAYOUT = -1
# Format string for the audio item names.
# Possible strings:
# a=artist, n=tracknumber, t=title, y=year, f=filename
# Example:
# This will show the title and the track number:
# DIRECTORY_AUDIO_FORMAT_STRING = '%(n)s - %(t)s'
# DIRECTORY_AUDIO_FORMAT_STRING = '%(t)s'
# Use media id tags to generate the name of the item. This should be
# enabled all the time. It should only be disabled for directories with
# broken tags.
DIRECTORY_USE_MEDIAID_TAG_NAMES = 1
# The following settings determine which features are available for
# which media types.
# If you set this variable in a folder.fxd, the value is 1 (enabled)
# or 0 (disabled).
# Examples:
# To enable autoplay for audio and image files:
# DIRECTORY_AUTOPLAY_ITEMS = [ 'audio', 'image' ]
# To disable autoplay entirely:
# DIRECTORY_AUTOPLAY_ITEMS = []
# Make all items a playlist. So when one is finished, the next one will
# start. It's also possible to browse through the list with UP and DOWN
# DIRECTORY_CREATE_PLAYLIST = [ 'audio', 'image' ]
# Add playlist files ('m3u') to the directory
# DIRECTORY_ADD_PLAYLIST_FILES = [ 'audio', 'image' ]
# Add the item 'Random Playlist' to the directory
# DIRECTORY_ADD_RANDOM_PLAYLIST = [ 'audio' ]
# Make 'Play' not 'Browse' the default action when only items and not
# subdirectories are in the directory
# DIRECTORY_AUTOPLAY_ITEMS = [ ]
# ======================================================================
# Freevo movie settings:
# ======================================================================
# Where the movie files can be found.
# This is a list of items (e.g. directories, fxd files). The items themselves
# can also be a list of (title, file)
VIDEO_ITEMS = [
('movies', '/home/per/movies'),
('movies extra', '/extra/movies'),
('tv', '/home/per/tv'),
('tv extra', '/extra/tv'),
# Some people access movies on a different machine using an automounter.
# To avoid timeouts, you can specify the machine name in the directory
# to check if the machine is alive first
# Directory myserver:/files/server-stuff will show the item for the
# directory /files/server-stuff if the computer myserver is alive.
# The list of filename suffixes that are used to match the files that
# are played wih MPlayer.
# VIDEO_MPLAYER_SUFFIX = [ 'avi', 'mpg', 'mpeg', 'wmv', 'bin', 'rm',
# 'divx', 'ogm', 'vob', 'asf', 'm2v', 'm2p',
# 'mp4', 'viv', 'nuv', 'mov', 'iso',
# 'nsv', 'mkv' ]
# The list of filename suffixes that are used to match the files that
# are played wih Xine.
# VIDEO_XINE_SUFFIX = [ 'avi', 'mpg', 'mpeg', 'rm', 'divx', 'ogm',
# 'asf', 'm2v', 'm2p', 'mp4', 'mov', 'cue' ]
# Preferred video player
VIDEO_PREFERED_PLAYER = 'mplayer'
# Only scan OVERLAY_DIR and VIDEO_SHOW_DATA_DIR for fxd files containing
# information about a disc. If you only have the fxd files for discs in
# one of this directories (and subdirectories), set this to 1, it will
# speed up startup, 0 may be needed if you have fxd files with disc links
# in your normal movie tree.
# VIDEO_ONLY_SCAN_DATADIR = 1
# try to detect a movie with more than one file and join them as one
# item
VIDEO_AUTOJOIN = 1
# try to find out if deinterlacing is needed or not
# VIDEO_DEINTERLACE = None
# Instruct player to use XVMC for playback
# VIDEO_USE_XVMC = None
# Pass field dominance parameter to MPlayer
# VIDEO_FIELD_DOMINANCE = None
# PRE and POST playing commands. Set these to a runnable command if
# you wish to do something before and after playing a video, like
# dimming the lights
# VIDEO_PRE_PLAY = None
# VIDEO_POST_PLAY = None
# ======================================================================
# Freevo audio settings:
# ======================================================================
# Where the Audio (mp3, ogg) files can be found.
# This is a list of items (e.g. directories, fxd files). The items themselves
# can also be a list of (title, file)
# To add webradio support, add fxd/webradio.fxd to this list
AUDIO_ITEMS = [
('music', '/home/per/music'),
('music extra', '/extra/music'),
('playlists', '/home/per/.mpd/playlists'),
# The list of filename suffixes that are used to match the files that
# are played as audio.
# AUDIO_SUFFIX = [ 'mp3', 'ogg', 'wav','m4a', 'wma', 'aac', 'flac', 'mka' ]
# Regular expression used to recognize filenames which are likely to be
# covers for an album
# This will match front.jpg and cover-f.jpg, but not back.jpg nor cover-b.jpg:
# AUDIO_COVER_REGEXP = 'front|-f'
# Format strings used to seach for audio cover images.
# Fist matching GIF, JPG or PNG image will be used as cover.
# Examples:
# AUDIO_COVER_FORMAT_STRINGS = [ 'cover-%(artist)s-%(album)s', 'mycover' ]
# AUDIO_COVER_FORMAT_STRINGS = [ '%(album)s', '../covers/%(album)s', '../covers/nocover' ]
# Preferred audio player
AUDIO_PREFERED_PLAYER = 'mplayer'
# Show video files in the audio menu (for music-videos)
AUDIO_SHOW_VIDEOFILES = False
# ======================================================================
# Freevo image viewer settings:
# ======================================================================
# Where image files can be found.
# This is a list of items (e.g. directories, fxd files). The items itself
# can also be a list of (title, file)
IMAGE_ITEMS = [
('pictures', '/home/per/pictures'),
# The list of filename suffixes that are used to match the files that
# are used for the image viewer.
# IMAGE_SUFFIX = [ 'jpg','gif','png','jpeg','bmp','tiff','psd' ]
# The viewer now supports a new type of menu entry, a slideshow file.
# It also has the slideshow alarm signal handler for automated shows.
# It uses a new configuration option:
# IMAGE_SSHOW_SUFFIX = [ 'ssr' ]
# The viewer can exclude certain types of images based on the regular expression list
# eg IMAGE_EXCLUDE = [('thm','tn_')]
# IMAGE_EXCLUDE = None
# Mode of the blending effect in the image viewer between two images
# Possible values are:
# None: no blending
# -1 random effect
# 0 alpha blending
# 1 wipe effect
IMAGEVIEWER_BLEND_MODE = -1
# When viewing images on a TV screen where the pixels are not square
# the images need to be scaled according to the aspect ratio of the TV
# Use this setting for 16x9 TVs
# IMAGEVIEWER_ASPECT = (float(1024) / float(720))
# Use this setting for 4x3 TVs
# IMAGEVIEWER_ASPECT = (float(768) / float(720))
# Use this setting for Monitors including HDTVs
# IMAGEVIEWER_ASPECT = 1.0
# IMAGEVIEWER_ASPECT = 1.0
# ======================================================================
# Freevo games settings:
# ======================================================================
# MAME is an emulator for old arcade video games. It supports almost
# 2000 different games! The actual emulator is not included in Freevo,
# you'll need to download and install it separately. The main MAME
# website is at http://www.mame.net, but the version that is used here
# is at http://x.mame.net since the regular MAME is for Windows.
# SNES stands for Super Nintendo Entertainment System. Freevo relies
# on other programs that are not included in Freevo to play these games.
# NEW GAMES SYSTEM :
# =================
# The GAMES_ITEMS structure is now build as follows :
# <NAME>, <FOLDER>, (<TYPE>, <COMMAND_PATH>, <COMMAND_ARGS>, <IMAGE_PATH>, \
# [<FILE_SUFFIX_FOR_GENERIC>])
# where :
# - <TYPE> : Internal game types (MAME or SNES) or
# generic one (GENERIC)
# - <COMMAND_PATH> : Emulator command
# - <COMMAND_ARGS> : Arguments for the emulator
# - <IMAGE_PATH> : Optionnal path to the picture
# - <FILE_SUFFIX_FOR_GENERIC> : If the folder use the GENERIC
# type, then you must specify here
# the file suffix used by the emulator
# GAMES_ITEMS = [
# ('MAME', '/home/media/games/xmame/roms',
# ('MAME', '/usr/local/bin/xmame.SDL', '-fullscreen -modenumber 6',
# '/home/media/games/xmame/shots', None)),
# ('SUPER NINTENDO', '/home/media/games/snes/roms',
# ('SNES', '/usr/local/bin/zsnes', '-m -r 3 -k 100 -cs -u', '', None )),
# ('Visual Boy Advance', '/home/media/games/vba/roms/',
# ('GENERIC', '/usr/local/vba/VisualBoyAdvance', ' ', '', [ 'gba' ] )),
# ('MEGADRIVE', '/home/media/games/megadrive/roms',
# ('GENESIS', '/usr/local/bin/generator-svgalib', '', '', '' ))
# GAMES_ITEMS = None
# These settings are used for the MAME arcade emulator:
# Priority of the game process
# 0 = Don't change the priority
# >0 - Lower priority
# <0 - Higher priority
# GAMES_NICE = -20
# MAME cache directory
# GAMES_MAME_CACHE = '%s/romlist-%s.pickled' % (FREEVO_CACHEDIR, os.getuid())
# ======================================================================
# Freevo SKIN settings:
# ======================================================================
# XML file for the skin. If SKIN_XML_FILE is set, this skin will be
# used, otherwise the skin will rememeber the last choosen skin.
# SKIN_XML_FILE = 'blurr'
# Select a way when to switch to text view even if a image menu is there
# 1 = Force text view when all items have the same image and there are no
# directories
# 2 = Ignore the directories, always switch to text view when all images
# are the same
# SKIN_FORCE_TEXTVIEW_STYLE = 1
# Force text view for the media menu
# (The media menu is the first menu displayed for video, audio, images
# and games).
# SKIN_MEDIAMENU_FORCE_TEXTVIEW = 0
# ======================================================================
# Freevo OSD settings:
# ======================================================================
# System Path to search for fonts not included in the Freevo distribution
# OSD_EXTRA_FONT_PATH = [ '/usr/share/fonts/truetype' ]
# Font aliases
# All names must be lowercase! All alternate fonts must be in './share/fonts/'
# OSD_FONT_ALIASES = { 'arial_bold.ttf' : 'VeraBd.ttf' }
# For non-european character sets the OSD_FORCE_FONTNAME and
# OSD_FORCE_FONTSIZE can be set. The size is a scaling ratio, ie 1.2.
# Setting OSD_FORCE_FONTNAME='batang.ttf' and OSD_FORCE_FONTSIZE=1.0
# allows Korean characters.
# OSD_FORCE_FONTNAME = None
# OSD_FORCE_FONTSIZE = None
# Number of seconds to wait until the busy icon is shown in the menu.
# Busy icon can also be shown right away when there is more than a certain
# number of files in a directory.
# Set this to None to disable this.
# (seconds, files)
# OSD_BUSYICON_TIMER = (0.7, 200)
# Number of pixels to move the display to centre the OSD on the display
# OSD_OVERSCAN_LEFT = OSD_OVERSCAN_RIGHT = 0
# OSD_OVERSCAN_TOP = OSD_OVERSCAN_BOTTOM = 0
# Setting the cursors when freevo is run in fullscreen mode
# OSD_X11_CURSORS = '/usr/lib/X11/cursors/black.cursor /usr/lib/X11/cursors/blank.cursor'
# Execute a script on OSD startup.
# OSD_SDL_EXEC_AFTER_STARTUP = ""
# Execute a script on OSD close.
# OSD_SDL_EXEC_AFTER_CLOSE = ""
# Stop the osd before playing a movie with xine or mplayer. Some output
# devices need this. After playback, the osd will be restored
# OSD_STOP_WHEN_PLAYING = 0
# Dim text that doesn't fit instead of using ellipses.
# OSD_DIM_TEXT = 1
# OSD sound effects
# OSD_SOUNDS_ENABLED=False
# OSD_SOUNDS= {
# 'menu.navigate': None,
# 'menu.back_one': None,
# 'menu.select' : None
# ======================================================================
# Freevo remote control settings:
# ======================================================================
# Location of the lircrc file
# For remote control support, Freevo needs a lircrc file, like this:
# begin
# prog = freevo
# button = select
# config = SELECT
# end
# Check contrib/lirc for examples and helpers/freevo2lirc.pl for a converter
# script.
# LIRCRC = '/etc/freevo/lircrc'
# Joystick support
# 0 = Disable joystick support
# 1 = Use js0,
# 2 = Use js1,
# ... etc
# JOY_DEV = 0
# JOY_SENS = 32000
# JOY_LOCKFILE = /path/to/joystick/lockfile
# Freevo can support as many buttons as your controller has
# as long as there is a corresponding entry in JOY_CMDS.
# You will also need to plugin.activate('joy').
# FYI: new kernels use /dev/input/jsX, but joy.py will fall back on /dev/jsX
# JOY_CMDS = {
# 'up' : 'UP',
# 'down' : 'DOWN',
# 'left' : 'LEFT',
# 'right' : 'RIGHT',
# 'button 1' : 'PLAY',
# 'button 2' : 'PAUSE',
# 'button 3' : 'STOP',
# 'button 4' : 'ENTER',
# Here are the PS3 joy stick mappings
# JOY_CMDS = {
# 'button 5' : 'UP',
# 'button 7' : 'DOWN',
# 'button 8' : 'LEFT',
# 'button 6' : 'RIGHT',
# 'up' : 'UP',
# 'down' : 'DOWN',
# 'left' : 'LEFT',
# 'right' : 'RIGHT',
# 'button 14' : 'SELECT', # <circle>
# 'button 16' : 'EXIT', # <square>
# 'button 15' : 'STOP', # <x>
# 'button 1' : 'ENTER', # <select>
# 'button 11' : 'VOL+', # <L1>
# 'button 9' : 'VOL-', # <L2>
# 'button 2' : 'MUTE', # <L3>
# 'button 10' : 'MUTE', # <R2>
# 'button 4' : 'PLAY', # <start>
# 'button 13' : 'PLAY', # <start>
# 'button 17' : 'MENU', # <ps>
# ======================================================================
# TVtime settings:
# ======================================================================
# Location of the TV time program
# Default: Use the value in freevo.conf
# TVTIME_CMD = CONF.tvtime
# ======================================================================
# MPlayer settings:
# ======================================================================
# MPLAYER_AO_DEV = 'oss:/dev/dsp' # e.g.: oss,sdl,alsa, see mplayer docs
# MPLAYER_VO_DEV_OPTS = '' # e.g.: ':some_var=vcal'
# DVD_LANG_PREF = 'en,se,no' # Order of preferred languages on DVD.
# DVD_SUBTITLE_PREF = '' # Order of preferred subtitles on DVD.
# Priority of mplayer process. 0 is unchanged, <0 is higher prio, >0 lower prio.
# prio <0 has no effect unless run as root.
# MPLAYER_NICE = -20
# Mplayer options to use the software scaler. If your CPU is fast enough, you
# might try a software scaler. You can disable it later for some larger files
# with the mplayer option '-nosws'. If you have -framedrop or -hardframedrop
# as mplayer option, the software scaler will also not be used.
# A good value for this variable is:
# MPLAYER_SOFTWARE_SCALER = "-subfont-text-scale 5 -fs -sws 2 -vf scale=%s:-3,"\
# "expand=%s:%s " % ( CONF.width, CONF.width, CONF.height )
# older versions of mplayer may need
# MPLAYER_SOFTWARE_SCALER = '-xy %s -sws 2 -vop scale:-1:-1:-1:100' % CONF.width
# MPLAYER_SOFTWARE_SCALER = ''
# Mplayer arguments for different media formats. (eg DVDs, CDs, AVI files, etc)
# Uses a default value if nothing else matches.
# MPLAYER_ARGS = { 'dvd' : '-cache 8192',
# 'vcd' : '-cache 4096',
# 'cd' : '-cache 1024 -cdda speed=2',
# 'tv' : '-nocache',
# 'ivtv' : '-cache 8192',
# 'avi' : '-cache 5000 -idx',
# 'rm' : '-cache 5000 -forceidx',
# 'rmvb' : '-cache 5000 -forceidx',
# 'webcam' : 'tv:// -tv driver=v4l:width=352:height=288:outfmt=yuy2:device=/dev/video2',
# 'default': '-cache 5000'
# Number of seconds before seek value times out. This is used when
# seeking a specified number of minutes into a movie. If you make
# a mistake or change your mind, the seek value will timeout after
# this many seconds.
# MPLAYER_SEEK_TIMEOUT = 8
# Autocrop files when playing. This is useful for files in 4:3 with black
# bars on a 16:9 tv
# MPLAYER_AUTOCROP = 0
# Try to set correct 'delay' and 'mc' values for mplayer based on the delay
# from mmpython.
# This should correct av sync problems with mplayer for some files, but
# may also break things. (I don't know, that's why it's disabled by default).
# WARNING: When seeking, the playback is out of sync for some seconds!
# MPLAYER_SET_AUDIO_DELAY = 0
# Mplayer video filter for interlaced or progressive videos. If you have
# a slow pc, do not use post processing
# MPLAYER_VF_INTERLACED = ''
# MPLAYER_VF_PROGRESSIVE = 'pp=fd'
# For pal and dvb-t recordings, the following looks good
# MPLAYER_VF_INTERLACED = 'pp=md/de,phase=U'
# MPLAYER_VF_INTERLACED = 'pp=de/fd'
# MPLAYER_VF_PROGRESSIVE = 'pp=de'
# For the autodetect TOP/BOTTOM field first in mplayer
# (if this feature present in mplayer)
# MPLAYER_HAS_FIELD_DOMINANCE = 1
# ======================================================================
# Xine settings:
# ======================================================================
# You need xine-ui version greater 0.9.21 to use the all the features
# of the xine plugin
# XINE_VO_DEV = 'xv'
# XINE_COMMAND = '%s --auto-play=fq --hide-gui --borderless --geometry %sx%s+0+0 --no-splash' % \
# (CONF.xine, CONF.width, CONF.height)
# XINE_ARGS_DEF = "--no-lirc --post='pp:quality=10;expand'"
# XINE_AO_DEV = 'oss' # alsa or oss
# Set to False if xine doesn't have '--no-lirc' option
# XINE_HAS_NO_LIRC = True
# Set to True is xine supports get_time this enables the position to be saved
# XINE_BOOKMARK = False
# ======================================================================
# Freevo TV settings:
# ======================================================================
# This is where recorded video is written.
# XXX the path doesn't work from the www cgi scripts!
# TV_RECORD_DIR = None
# This will enable duplicate recording detection
# TV_RECORD_DUPLICATE_DETECTION = True
# This will enable only new episodes to be recorded
# TV_RECORD_ONLY_NEW_DETECTION = True
# ================================================================================
# Watching TV
# ================================================================================
# XXX You must change this to fit your local conditions!
# NORM: ntsc, pal, secam
# INPUT: television, composite1
# CHANLIST: One of the following:
# us-bcast, us-cable, us-cable-hrc, japan-bcast, japan-cable, europe-west,
# europe-east, italy, newzealand, australia, ireland, france, china-bcast,
# southafrica, argentina, canada-cable, russia
# TV_SETTINGS = 'NORM INPUT CHANLIST DEVICE'
# Video input device
# Usually /dev/video0, but might be /dev/video1 instead for multiple boards.
# FreeBSD uses the Brooktree TV-card driver, not V4L.
# TV_DRIVER = 'v4l'
# TV_DEVICE = '/dev/video0'
# TV_INPUT = 0
# ================================================================================
# Listening to radio
# ================================================================================
# Radio device default is None, /dev/video24 for ivtv
# RADIO_DEVICE = '/dev/radio'
# Radio commands:
# plugin.activate('audio.radioplayer')
# plugin.activate('audio.radio')
# for fmtools
# RADIO_CMD = 'fm'
# RADIO_CMD_START = (RADIO_CMD + ' -d %s ' % RADIO_DEVICE + ' -q %s 65535')
# RADIO_CMD_STOP = (RADIO_CMD + ' -d %s ' % RADIO_DEVICE + ' -q off')
# for ivtv-radio
# RADIO_CMD = '/usr/bin/ivtv-radio -d /dev/radio0 -i /dev/video24'
# RADIO_STATIONS = [
# ('DRS 1', '94.80'),
# ('VIRUS', '104.30'),
# (u'Radio Zürisee', '90.20'),
# Additional options to pass to mplayer in TV mode.
# eg. To turn off deinterlacing:
# TV_OPTS = '-vop pp=ci'
# TV_OPTS = ''
# TV_SETTINGS = '%s television %s %s' % (CONF.tv, CONF.chanlist, TV_DEVICE)
# Size (in MB) of the timeshift buffer. (ie: how long you can pause tv for.)
# This is set to a low default because the default buffer location is
# under FREEVO_CACHEDIR and we don't want to blow /var or /tmp.
# TIMESHIFT_BUFFER_SIZE = 128
# TIMESHIFT_ENCODE_CMD = 'mp1e -m3 -c%s -p%s -r14,100' % \
# (TV_SETTINGS.split()[3], AUDIO_INPUT_DEVICE)
# TIMESHIFT_BUFFER = '%s/timeshift.mpeg' % FREEVO_CACHEDIR
# TV_DATE_FORMAT = '%e-%b' # Day-Month: 11-Jun
# TV_TIME_FORMAT = '%H:%M' # Hour-Minute 14:05
# TV_DATETIME_FORMAT = '%A %b %d %I:%M %p' # Thursday September 24 8:54 am
# This is the filename format for files recorded using Freevo.
# You can use any of the strftime variables in it, provided you
# put two '%%' at the beginning.
# Some examples:
# %%A - Full weekday name.
# %%H - Hour (24-hour clock) as a decimal number [00,23].
# %%M - Minute as a decimal number [00,59].
# %%m - Month as a decimal number [01,12].
# %%d - Day of the month as a decimal number [01,31].
# %%p - Locale's equivalent of either AM or PM.
# More can be found at: http://www.python.org/doc/current/lib/module-time.html
# TV_RECORD_FILE_MASK = '%%m-%%d %%H:%%M %(progname)s - %(title)s'
# If using the persistent recordserver
# TV_RECORD_SCHEDULE = FREEVO_STATICDIR + '/schedule.pickle'
# TV_RECORD_FAVORITES = FREEVO_STATICDIR + '/favorites.pickle'
# TV_RECORD_FAVORITES_LIST = FREEVO_STATICDIR + '/favorites.txt'
# RECORDSERVER_IP = 'localhost'
# RECORDSERVER_PORT = 18001
# RECORDSERVER_SECRET = 'secret1'
# If the recordserver runs as root, set the uid to the given one
# after startup. The gui must also match one of the users group ids
# RECORDSERVER_UID = 0
# RECORDSERVER_UID = 0
# Remove old recordings if GB free is less than specified value
# RECORDSERVER_CLEANUP_THRESHOLD = 0
# start every recording X minutes before scheduled,
# and stop X minutes after scheduled - default to zero minutes.
# This must be a value in seconds although at the moment only has
# the percision of one minute.
# TV_RECORD_PADDING_PRE = 0
# TV_RECORD_PADDING_POST = 0
# Number of minutes before or after the start time of a favorite where
# a program matching the name, day of week etc should still be considered a
# favorite. For example a favorite has a start time of 21.00, but the program
# has been brought forward by the broadcaster by 10 minutes to 20.50, with
# a margin of less than 10 this program will not be recorded as the start time
# is outside the margin. But if the margin is set at 10 minutes or greater this
# program will be considered a favorite and recorded. Probably about 45 minutes
# is the best bet, better a false positive than a false negative.
# TV_RECORD_FAVORITE_MARGIN = 45
# PRE and POST recording commands. Set these to a runnable command if
# you wish to have special mixer settings or video post processing.
# VCR_PRE_REC = None
# VCR_POST_REC = None
# VCR_AUDIO = (':adevice=%s' % AUDIO_DEVICE +
# ':audiorate=32000' + # 44100 for better sound
# ':forceaudio:forcechan=1:' + # Forced mono for bug in my driver
# 'buffersize=64') # 64MB capture buffer, change?
# TV capture size for viewing and recording. Max 768x480 for NTSC,
# 768x576 for PAL. Set lower if you have a slow computer!
# For the 'tvtime' TV viewing application, only the horizontal size is used.
# Set the horizontal size to 400 or 480 if you have a slow (~500MHz) computer,
# it still looks OK, and the picture will not be as jerky.
# The vertical size is always either fullscreen or 480/576 (NTSC/PAL)
# for tvtime.
# TV_VIEW_SIZE = (640, 480)
# TV_REC_SIZE = (320, 240) # Default for slower computers
# Input formats for viewing and recording. The format affect viewing
# and recording performance. It is specific to your hardware, so read
# the MPlayer docs and experiment with mplayer to see which one fits
# your computer best.
# TV_VIEW_OUTFMT = 'yuy2' # Better quality, slower on pure FB/X11
# TV_REC_OUTFMT = 'yuy2'
# XXX Please see the mencoder docs for more info about the settings
# XXX below. Some stuff must be changed (adevice), others probably
# XXX should be ("Change"), or could be in some cases ("change?")
# VCR_CMD = (CONF.mencoder + ' ' +
# 'tv:// ' + # New mplayer requires this.
# '-tv driver=%s:input=%d' % (TV_DRIVER, TV_INPUT) +
# ':norm=%s' % CONF.tv +
# ':channel=%(channel)s' + # Filled in by Freevo
# ':chanlist=%s' % CONF.chanlist +
# ':width=%d:height=%d' % (TV_REC_SIZE[0], TV_REC_SIZE[1]) +
# ':outfmt=%s' % TV_REC_OUTFMT +
# ':device=%s' % TV_DEVICE +
# VCR_AUDIO + # set above
# ' -ovc lavc -lavcopts ' + # Mencoder lavcodec video codec
# 'vcodec=mpeg4' + # lavcodec mpeg-4
# ':vbitrate=1200:' + # Change lower/higher, bitrate
# 'keyint=30 ' + # Keyframe every 10 secs, change?
# '-oac mp3lame -lameopts ' + # Use Lame for MP3 encoding, must be enabled in mencoder!
# 'br=128:cbr:mode=3 ' + # MP3 const. bitrate, 128 kbit/s
# '-ffourcc divx ' + # Force 'divx' ident, better compat.
# '-endpos %(seconds)s ' + # only mencoder uses this so do it here.
# '-o %(filename)s') # Filled in by Freevo
# TV_VIDEO_GROUPS setting to handles multiple arbitrary groups of devices
# for viewing or recording. It is possible to have different Freevo
# channels use different Video Groups.
# See the wiki for more details:
# http://doc.freevo.org/MultiTunerConfig
# http://doc.freevo.org/Analoguemulti
# This example is when you have one IVTV type card installed
# TV_VIDEO_GROUPS = [
# VideoGroup(vdev=TV_DEVICE,
# adev=AUDIO_DEVICE,
# input_type='tuner 1',
# input_num=0,
# tuner_norm=CONF.tv,
# tuner_chanlist=CONF.chanlist,
# group_type = 'ivtv',
# desc='PVR-350 Video Group'),
# This example is for two normal TV cards to allow you to use one card to
# view a programme and the other card to record at the same time
# TV_VIDEO_GROUPS = [
# # Use this group for watching tv
# VideoGroup(vdev='/dev/video0',
# adev=None,
# input_type='tuner 1',
# tuner_norm=CONF.tv,
# tuner_chanlist=CONF.chanlist,
# desc='Watching Video Group',
# record_group=1),
# # Use this group for recording tv
# VideoGroup(vdev='/dev/video1',
# adev=None,
# input_type='tuner 1',
# tuner_norm=CONF.tv,
# tuner_chanlist=CONF.chanlist,
# desc='Recording Video Group',
# record_group=None),
# Settings for ivtv based cards such as the WinTV PVR-250/350.
# TODO: Add descriptions and valid settings for each option.
# bitrate in bps
# stream type
# Options are: 0 (mpeg2_ps), 1 (mpeg2_ts), 2 (mpeg1), 3 (mpeg2_pes_av),
# 5 (mpeg2_pes_v), 7 (mpeg2_pes_a), 10 (dvd)
# TV_IVTV_OPTIONS = {
# 'input' : 4,
# 'resolution' : '720x480',
# 'aspect' : 2,
# 'audio_bitmask' : 233,
# 'bframes' : 3,
# 'bitrate_mode' : 1,
# 'bitrate' : 4000000,
# 'bitrate_peak' : 4000000,
# 'dnr_mode' : 0,
# 'dnr_spatial' : 0,
# 'dnr_temporal' : 0,
# 'dnr_type' : 0,
# 'framerate' : 0,
# 'framespergop' : 15,
# 'gop_closure' : 1,
# 'pulldown' : 0,
# 'stream_type' : 10,
# TV Channels. This list contains a mapping from the displayed channel name
# to the actual channel name as used by the TV watching application.
# The display name must match the names from the XMLTV guide,
# and the TV channel name must be what the tuner expects (usually a number).
# The TV menu is supposed to be supported by the XMLTV application for
# up to date listings, but can be used without it to just display
# the available channels.
# This list also determines the order in which the channels are displayed!
# N.B.: You must delete the XMLTV cache file (e.g. /var/cache/freevo/TV.xml.pickled)
# if you make changes here and restart!
# Format: [('xmltv channel id', 'freevo display name', 'tv channel name'), ...]
# If this variable is set to None (default), Freevo will try to auto-detect
# the channel list based on the xmltv file. This doesn't work for all
# xmltv grabber, e.g. the German list doesn't contain station lists. In this
# case Freevo will output the possible list for you to add them manually.
# If auto-detection doesn't work or you want to edit the list, run
# freevo tv_grab -query.
# Setting this variable to [] will deactivate the tv guide. If you don't have
# a tv card, you may also want to add plugin.remove('tv') to remove the whole
# tv menu.
# All channels listed here will be displayed on the TV menu, even if they're
# not present in the XMLTV listing.
# Timedependent channels:
# The TV_CHANNELS-list can look like this:
# TV_CHANNELS = [('21', 'SVT1', 'E5'),
# ('22', 'SVT2', 'E3'),
# ('26', 'TV3', 'E10'),
# ('27', 'TV4', 'E6'),
# ('10', 'Kanal 5', 'E7'),
# ('60', 'Fox Kids', 'E8', ('1234567','0600','1659')),
# ('16', 'TV6', 'E8', ('1234567','1700','2359'),
# ('1234567','0000','0300')),
# ('14', 'MTV Europe', 'E11') ]
# As you can see the list takes optional tuples:
# ( 'DAYS', 'START','END')
# 1234567 in days means all days.
# 12345 would mean monday to friday.
# It will display "Fox Kids" from 06:00 to 16:59 and "TV6" from 17:00 to 03:00.
# 03:00 to 06:00 it won't be displayed at all.
# TV_CHANNELS = None
# A lambda function to sort the TV_CHANNELS
#TV_CHANNELS_COMPARE = lambda a, b: cmp(int(a[2]), int(b[2]))
# TV_FREQUENCY_TABLE - This is only used when Freevo changes the channel natively.
# This is only the case if you are using V4L2 and any of the following plugins:
# timeshift, ivtv_record, ivtv_basic_tv.
# For the standard frequancy tables see src/tv/freq.py. To add your own just
# replace tuner_id in the following example with a valid tuner id (ie: '5' or
# 'BBC1') and a frequency in KHz. You may have as many entries as you like,
# anything here will simply override a corresponding entry in your standard
# frequency table and you can also have entries here that are not present in
# there.
# TV_FREQUENCY_TABLE = {
# 'tuner_id' : 55250,
# Program to grab xmltv listings. To get a grabber, you need to download
# xmltv. A possible value for users in the USA is tv_grab_na
# Use the tv_grab helper to grab the listings and cache them. Start
# 'freevo tv_grab --help' for more informations.
# XMLTV_GRABBER = ''
# If you want to run tv_sort on your listings add the path to tv_sort here.
# tv_sort will make sure all your programs have proper stop times, otherwise
# programs might get cut off at midnight.
# XMLTV_SORT = ''
# Number of days the grabber should get
# XMLTV_DAYS = 3
## ONLY ADJUST THIS IF YOUR GUIDE TIMES ARE INCORRECT ##
# GMT offset for XMLTV feeds that don't contain timezone information
# An example of this is the OzTivo feed which has the timestamps
# in the XML pre-adjusted for your timezone
# XMLTV_TIMEZONE='+0100'
# ======================================================================
# Freevo builtin commdetect server settings:
# ======================================================================
# COMMDETECTSERVER_UID = 0
# COMMDETECTSERVER_GID = 0
# COMMDETECTSERVER_IP = 'localhost'
# COMMDETECTSERVER_PORT = 6667
# ======================================================================
# Freevo builtin rss server settings:
# ======================================================================
# RSSSERVER_UID = 0
# RSSSERVER_GID = 0
# RSS_CHECK_INTERVAL = 3600
# RSS_FEEDS = '/etc/freevo/rss.feeds'
# RSS_VIDEO = '/media/video'
# RSS_AUDIO = '/media/podcasts'
# ======================================================================
# Freevo builtin WWW server settings:
# ======================================================================
# To activate the built in web server, uncomment the following line
# plugin.activate('www')
# Web server port number. 80 is the standard port, but is often
# taken already by apache, and cannot be used unless the server
# runs as root. Port 8080 is the default, change to 80 if
# needed.
# WEBSERVER_PORT = 8080
# Username / Password combinations to login to the web interface.
# WWW_USERS = {
# "user1" : "changeme",
# "optional" : "changeme2"
# Divide the TV guide into intervals of this length (in minutes)
# WWW_GUIDE_INTERVAL = 30
# Precision for TV guide (in minutes)
# WWW_GUIDE_PRECISION = 5 #
# Show this many blocks at once
# WWW_GUIDE_COLS = 6
# WWW_STYLESHEET = 'styles/main.css'
# WWW_JAVASCRIPT = 'scripts/display_prog-head.js'
# Integrate personal web pages into the web server
# WWW_PERSONAL_PAGE = [
# ('My Page', 'a single personal web page', 'page.html'),
# ('My Site', 'site description', 'site/'),
# ======================================================================
# Internal stuff, you shouldn't change anything here unless you know
# what you are doing
# ======================================================================
# Config for xml support in the movie browser
# the regexp has to be with ([0-9]|[0-9][0-9]) so we can get the numbers
# VIDEO_SHOW_REGEXP = "s?([0-9]|[0-9][0-9])[xe]([0-9]|[0-9][0-9])[^0-9]"
# Remote control daemon. The server is in the Freevo main application,
# and the client is a standalone application in rc_client/
# ENABLE_NETWORK_REMOTE = 0
# REMOTE_CONTROL_HOST = '127.0.0.1'
# REMOTE_CONTROL_PORT = 16310
# Remote control daemon. Similar to the one above, but uses TCP instead
# of UDP. It is possible to send commands with a telnet client.
# ENABLE_TCP_NETWORK_REMOTE = 0
# REMOTE_CONTROL_TCP_HOST = '127.0.0.1'
# REMOTE_CONTROL_TCP_PORT = 16311
# XMLTV File
# This is the XMLTV file that can be optionally used for TV listings
# XMLTV_FILE = '/tmp/TV.xml'
# XML TV Logo Location
# Use the "makelogos.py" script to download all the
# Station logos into a directory. And then put the path
# to those logos here
# TV_LOGOS = OS_CACHEDIR + '/xmltv/logos'
# ======================================================================
# Idlebar and plugins
# These are the default idlebar settings, there are many more see:
# freevo plugins -l for a complete list
# To turn off use plugin.remove('idlebar.cdstatus')
# clock display
# %A - Full weekday name.
# %a - Abbreviated weekday name.
# %B - Full month name
# %b - Abbreviated month name
# %I - Hour (12-hour clock) as a decimal number [01,12].
# %H - Hour (24-hour clock) as a decimal number [00,23].
# %M - Minute as a decimal number [00,59].
# %m - Month as a decimal number [01,12].
# %b - Name of Month
# %d - Day of the month as a decimal number [01,31].
# %p - Locale's equivalent of either AM or PM.
# %y - Year without century as a decimal number [00,99].
# %Y - Year with century as a decimal number.
# ======================================================================
# plugin.activate('idlebar')
# plugin.activate('idlebar.tv', level=20)
# plugin.activate('idlebar.cdstatus', level=25)
# plugin.activate('idlebar.diskfree', level=30)
# plugin.activate('idlebar.clock', level=50)
# CLOCK_FORMAT = '%a %d %H:%M'
# Debugging and logging settings
# logging can be one of:
# CRITICAL, ERROR, WARNING, INFO, DEBUG or NOTSET
# debugging is a number from 0 to 9, 0 is no debugging 9 is most
# LOGGING = logging.DEBUG
# LOGGING_RECORDSERVER = logging.DEBUG
# DEBUG = 1
# messages go to stdout
# DEBUG_STDOUT = 0
# messages from starting a child application
# DEBUG_CHILDAPP = 1
# timing messages
# DEBUG_TIME = 0
I've been reading wikis and googling now the entire weekend so I hope someone here can help me.Perre wrote:I'm used to being able to pick one or a couple of songs and then adding it a specified playlist. Is this impossible in sonata?
It's clearly not impossible, just different than you expect. Create your playlist as you want it to appear in the Current tab (meaning don't dump every single song from your library in there, just the ones you want) and then save the playlist.
Perre wrote:And if I try to play the m3u file created (the one with every song listed) through freevo I get a message that the directory is empty. What am I doing wrong??
Look at save_absolute_paths_in_playlists in your mpd.conf. -
I like the idea of being able to browse using cover art but it is only a useful feature if you can get most cover art . There are many albums for which iTunes has album cover art, albums which I own original copies of, for which I can't get album art.
Examples: Sigur Ros /Saeglour, T-Bone Burnett /True False Identity, Paul Simon/ Surprise, Graceland, all of Van Morrison's albums, most Dylan and Neil Young albums and many others.
Apple put this feature on I Tunes, but many album covers which you show on the Itunes store website don't download. I have both checked "automatically download missing album artwork" in preferences and requested Get album artwork in the Advanced Tab . If I control click on the album artwork on iTunes store, I can't even copy the image to paste it in manually. Also, when I request album art I often get an "unable to download certain artwork " message with no further explanation. If I'm supposed to buy the album art I'd like to know how and how much.
What's up?The spelling was ok since almost all were entered using gracenote. Anyway it suddenly started working. without changing anything I could tell I asked again to get album artwork from the Advanced tab and it started downloading 400 album covers. whatever. So my problem wasn't answered but it is solved. thanks for the google image search idea. So I guess I'll mark it answered.
-
REMOTE app on iPhone does not display Cover Art
I use the Apple REMOTE App on my iPhone to control my iTunes music library on a Mac. The REMOTE App controls the iTunes playback properly. However, the Cover Art for each song does not display on the "song" screen - showing the song currently playing. Across my iPhone screen (where the Cover Art should appear) are the words containing album of the song). The name of the song and album correctly appear at the top of the screen.
What is interesting is that when I hit the back arrow (left side top on song screen), all of the Cover Art appears in small thumbnails. The Cover Art also appears in other displays (for example, the currently-playing Album) using REMOTE on my iPhone. This means that the cover art is being transmitted to my iPhone - HOWEVER IT DOES NOT DISPLAY ON THE SONG SCREEN.
Can anyone kindly help me resolve this - because I would really like the Cover Art to display properly on the song screen. Thank you. DaleNezmo, This is really unbelievable. I have suffered from the issue I described for SEVERAL YEARS. Today, for some reason I decided to make this post on the Apple discussion board. And, today the issue was fixed by Apple. I just downloaded the update to the REMOTE app and the cover art now shows beautifully on my iPhone 6 plus. Thanks. Dale
-
So, to begin I own 3 PCs and the latest iPad/iPhone running iTunes on all 3 PCs. For simplicity, I will refer to the PCs as old, laptop, and new.
My laptop was my primary PC which i used to set up iTunes match. The old PC had all of my music files which have appeared to have been uploaded to Match. Note that I had already transferred most (if not all) of the music to my laptop but I enabled match so that I could download new files to my old PC. Note that I did quite a bit of cleaning, retagging, and ordering files and that I was told by Apple that Match would recognize duplicates, and as such, would not upload these files to the cloud in Match (this does not appear to be the case, however). My laptop PC (originally set up on Match) indicates there are alot of files in the clould (Match) to download. These seem to be duplicate files which were already cleaned on the Laptop and were uploaded on the old PC machine. Thus, it appears that Apples matching alogorythm is not strong enough to detect minor differences (i.e. cover art) in files and decides to upload them anyway (quite annonying if you ask me).
Now, to my problem; I purchased a new PC and have been removing the last duplicate songs, updating cover-art, playlists, among other things. My new PC (which I will refer to as "new") is not recognized by iTunes Match. I have tried uninstalling each app associated with iTunes, starting fresh with a new playlist and library to no avail.
Has anyone else had this problem? Apple Care does not seem to have much knowledge about Match, which is a bit frustrating. All I wish to do is tell Match that my New PC should be the primary PC which will be used to deliver playlists, music, etc since the other 2 machines have many duplicates and the playlists have errors within them. I thought about these solutions (none of which are no appealing) 1) using the laptop as my primary iTunes Match PC since this was the PC Match was created on (this would require rebuilding playlists and removing a massive amount of duplicates, again), 2) creating a new iTunes Match account based on my New PC (basically starting over), 3) forgetting Match all together and going back to the old school store & sync.
Anyone have better ideas or experiencing similar issues? Any thoughts would be appreciated. Thx!After going by elimination to isolate if the problem was from (1) iTunes app, (2) my computer or (3) my old iPhone 4G, I figured out what my problem was.
1) First I deleted & reinstalled iTunes on my Windows PC without succes, my playlist did not changed on my iPhone.
2) I tested a successful #sync from the iMac at work.
So my conclusion is: The hard drive on my Windows PC is full and that is affecting iTunes SYNC functionalities.
So I'll do a back-up then run a "Clean Install" of my Windows OS, hoping that it will fix my SYNC problems. -
Urgh...wrong album cover art...how do I take it off
I have?a Zen Vision M, 30gb, and I have a problem removing unwanted cover art. I suppose it's not that big of a deal in the grand scheme of things...the songs play, and they're where their supposed to be. But I find this HELLA annoying
!!! Since I've transferred a great deal of my CD collection into it, I like to organize things (and search) by album. But since I also have a lot of random songs that I have downloaded from various places, and I don't want a whole bunch of incomplete "albums" to search through, I filed them into an "album" tagged "Miscellaneous."? So last night I'm?making new tags and reorganizing some files, and when I unplug my Zen from the computer, I go into my "Miscellaneous" and see that?ALL the songs now have the cover art?from ONE of the songs in that folder. What's even stranger is that that specific?cover art doesn't even show in Windows Media Player, so I have NO idea how it became attached with all my miscellaneous songs. To top it off, I transferred some CD's into my Zen who's cover art DID show, but it doesn't come up in my Zen. To that I say "whatever"... I'd like to have the cover art, but I can li've without it. But to have the WRONG cover art for?A LOT of my songs just makes me?incredibly aggrevated!? So what can I do to remove the unwanted cover art?
Oh, and I should point out that I got my Zen when it'sfirst came out, so I have like the oldest MediaSource Organizer that doesn't support cover art.I don't own a Vision M, but I know how my other players from Creative work. They use the ID3 tags in each track for artist, album art, etc. I use media monkey to tag all the tracks on my computer before I transfer them to the player. Here's the bad news. In my experience, you will have to remove the tracks from the player and throw them back on once they are tagged properly. I know of no way to change the tags on the players themselves. Eric
-
Windows 7 Music Library doesn't show some of my album art all of a sudden. No solutions found!!
So my music files in my music folder on the computer still doesn't show the album art. some of the art covers still exist on the music files but newly downloaded and some music files that existed don't show the album art anymore.
I've tried most of the solutions online but none of them solved the problem. I don't think it's the media player because when I play it on the media player it shows the album art for the music. And I also cleared the cashe in the mediaplayer folder. There
must be something with the system because the folder showed the cover art before but all of a sudden it stopped displaying them.
I don't know what's wrong with it...is there something that makes the music album art not show all of a sudden and the album art doesn't show for the newly downloaded music as well...Hi haydnan
It may be a problem of Windows 7 Explorer. First you can try all the different explorer views, title, Large icon..
If there is no effect, you can try to the following methods.
In Windows Explorer
1. left click on the mail folder where your music is stored and select it.
2. Now right click and go to “properties”.
3. Now click “advanced”.
4. Put a check in the “Allow files in this folder to have contents indexed in addition to file properties”.
5.Click ”OK”.
6.Click”Apply”.
7. Click “OK” to apply changes to this folder. Sub folders and files.
Now go to your music library and see if it works. -
How to see cover art while browsing playlists?
Is there any way to see the art work displaying in the Selected Song window or anywhere else while browsing the Playlists?
I can't only see the art cover when I select a song, but not before. It would be useful to be able to the cover art of the albums that I have created in the playlist.
I'm using iTunes v4.7.1
Thanks in advance!Is there any way to see the art work displaying in the Selected Song window or anywhere else while browsing the Playlists?
Yes, when you have a song selected.
I can't only see the art cover when I select a song
You mean you CAN only see it when a song is selected?
It would be useful to be able to the cover art of the albums that I have created in the playlist.
This feature was introduced in iTunes 7.
You can view all the artwork with the songs. -
No cover art when importing CD to music library...
I travel alot and have a vast CD colllection. That's why I bought my iPod. It's a convenient way to take my music with me on planes, trains, and where ever. While I am very happy with that decision, one of my disappointments that when iTunes downloads CD information from the internet, it does not download cover art.
I own the CDs and use the music for personal use, so I don't see this as a copyright issue. If I rip the same CD using Widows Media Center, or almost any other software, the downloaded information includes the album cover. Why the hestitency with Apple's iTunes? All I want to see is a picture of the album cover next to the name of the tune that is playing.Hello Anna,
And welcome to Apple Discussions!
There could a couple of different things happening here. First of all, are you having iTunes automatically retrieve album information from its database and filling in these details automatically, or are you entering the album information in by hand?
If you are entering this information in by hand make sure the Album name is the same throughout each track. To make sure, highlight all the tracks in the album at once by holding down the CTRL key. Then right->click on them and choose "Get Info" from the menu. From there, head over to the Info tab and re-enter the album name.
If that is not the case, is this album a compilation, meaning that it has tracks with various other artists as well? If so, its probably marked as part of a compilation in iTunes and you can remove the tick mark next to this option from the Info tab as well.
For now we'll start there.
Hope this helps.
B-rock
Maybe you are looking for
-
Exception thrown from action: createLink
Hi, I am trying to install Application server on Red Hat Enterprise Linux 4. I got the folowing error Starting install Install Phase 2 of component Oracle Client Required Support Files Calling Action unixActions10.1.0.4.0 createLink source = /u01/app
-
Adobe Reader Has Stopped Working Possible Fix
Hey, I just had a battle with the adobe program on a computer, it would go to open, then right away it would show up with the error message: "Adobe Reader <version> Has Stopped Working" then it sends information and closes. I fixed my issue by going
-
Photo Booth & Preview Fail to Open
All, I have noticed that Photo Booth and Preview have stopped working. When I try and open them they both bouncy in the Dock once and then stop. I get no errors or crash reports. Plain and simply refuse to open. If I want to view any images I need to
-
Using Decode with "Long" datatypes
Hi, I want to use a select statement in a view which uses a decode function involving a "long" datatype. But doing some raises an error "Invalid datatypes". Is there a way around? Anupam.
-
Windows7 64-bit can not detect my creative sb live 24-bit 7.1
>windows7 64-bit can not detect my creative sb li've 24-bit 7. windows7 can not detect my creative sb li've 24-bit 7. I tried every thing updated my bios tried in device manager tried in any mode you like tried to install the latest drivers that supp