Cover eligibility doesn't work

Hi all,
We've defined a derivation strategy for cover eligibility to group in a same cover group all commitments items that the second substring of commitment item is 7111 (for all funds centers). We use internal number.
Our derivation strategy is:
- Source fields:
CISUB2 = 7111
FUNDSCTR = (range from 0000 to ZZZZ)
- Target fields:
OTHER_CMMTITEM = +++++++++++++++
When we execute the strategy, the result is one cover group for each funds center. But we want to group all funds centers.
How to do that?
Thank you

Hi, I know this thread is pretty old, but if this is still an open question for you, just reply and we will try to help
cheers
Mar

Similar Messages

Ever since iTunes 10.2.1 the cover flow doesn't work

Whenever I switch to view cover flow it just removes the whole top section where the Play, FF, Volume buttons etc are...the cover flow doesn't even show up. Which is pretty lame because the -only- reason I am using iTunes is because of the cover-flow. If I wanted to see my album artwork stacked vertically I'd just use WMP instead of apple's insanely awkward interface.
Any tips on what I can do here? I thought 10.2.2 would fix this but alas :-(

Malware can cause digital signing issues, I would run a malware check with the free version of MalwareBytes:
http://www.malwarebytes.org/
After that, the is a Microsoft fixit for:
The software you are installing has not passed Windows Logo testing to verify its compatibility with Windows XP. (Tell me why this testing is important.)
This software will not be installed. Contact your system administrator.
http://support.microsoft.com/kb/822798
It might be worth trying it.

Cover flow doesn't work with Nano Firmware update 1.03

Is anybody facing this problem... the cover flow pictures don't show up now.. with firmware 1.03. Even if I re-ad the CD cover images to the songs... somehow or rather it doesn't show up with this firm ware...
Any help?

Sorry all...
I think this problem is highlighted in this later thread after mine...
*http://discussions.apple.com/thread.jspa?threadID=1851781&tstart=0*

Cover Flow doesn't work in 7115?

I just upgraded iTunes to 7.1.1.5 today, and when I ask it to display in cover flow mode, I get an onscreen message saying that "iTunes cannot browse album covers on this computer." This is odd, because it did so without any complaint before this upgrade. Has anyone got a clue what's going on? Has some Vista-targeted upgrade set a new arbitrary benchmark on what system specifications will support this feature?

Sure enough, it was the absence of enabled directdraw. It's funny; I assume that I know more about computers than my brother, who's a PC gamer, but he would never have a box running without having his video setup tuned to perfection. I just work on my machine, so I hadn't noticed. Thanks again.

Cover Flow doesn't work

My computer crashed and I had to restore all my music from my back up discs. Before my computer crashed, I was able to view my albums on Cover Flow, now I cannot. I get a message that says "unable to view cover flow on this computer."
How can I get cover flow to work??? Help!

It's not exactly the message you are getting but have you had a look at this troubleshooting page? It may be of some help: iTunes 7 for Windows is unable to display album covers in Cover Flow

The cover SCR26 doesn't work

Hello,
I just received a cover SCR26, but there is no effect to get informations on the little screnn of the cover. I precise that the NFC is activated on my phone.

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
I'm not sure what you mean, could you please elaborate? Does the home screen not appear in the window? Have you done the setup correct (see link below)?
http://support.sonymobile.com/global-en/stylecoverscr26/userguide/To-set-up-the-Style-Cover-for-use/
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Cover Flow doesn't work fine.

After I downloaded video podcasts (Best of youtube) I can't see my albums in Cover Flow. I see my videos! Only when I select an album, the correct picture appears. I also tried to Restore my iPod and after restore, when I downloaded again the podcast, the same error appeared. Furthermore, I tried resetting my iPod and restaring it, but it was useless. Note that this is my first iPod ever and I have it only for 3 days. I am really annoyed! Please help me!

Thanks for the reply. Glad to know it's not just me.
Do you know if it's planned to be fixed in the near future or if it's way down the priority list?
thanks
DELL Windows XP

Front camera of my iPhone 4 doesn't work, the virtual cover doesn't open.

Yesterday I have bought an used iPhone 4, so I don't have any guarantee. But the front camera doesn't work, the virtual cover doesn't open. I have read that it is something like a hardware fault. Now my question is, if Apple has to repair it because of the hardware fault?

they dont do repairs..is much easier for them to give u new handset..which u have to pay for if is out of warranty.
dont be affraid is not a full cost of handset.is be about £139.00-£169.00
i use to work as an technician engineer in a phone shop still have access to warehouse with replacement parts.
if u live in UK and willing to pay £50 i can repair it for u.i'm still cheaper than apple store

My ipad lighting charger doesn't work dose apple care cover this ?

My ipad lighting charger doesn't work dose apple care cover this ?

The charger is covered by the one-year warranty.

TS2634 Ipad 3 cover fault - magnetic switch off doesn't work. Anyone found a way to make this work please?

Ipad 3 cover fault - magnetic switch doesn't work to switch off ipad when cover is closed. Anyone found a way to make this work please?

Has this problem just cropped up or has it been there all along.
The iPad 3 requires a Smart Cover with magnet aligned only in a certain way. This was not the case for the previous models of iPads. So some older covers will work with the newer iPads because their magnets just happened to be aligned just right. Other covers will not.

Canon mini Disk camera doesn't work if external drive connected

A long story.      Anyway, I have a MacPro Intel Dual Core 266 Ghz with 5 Gbs RAM, 4 internal hard drives HD1~HD4 (HD1 OSX 250 and three 500Gb) and two external HD5 (two partitions~HD5 & Time Machine Backups) and HD6 (1 Tb each).
I've been using a Canon mini DV video camera FV-M10 (Firewire 400) for live video (Skype/iChat) and also for importing video into Final Cut Express, After Effects or iMovie up until a few days ago. Both "live" video and from the recorded mini cassette tape. Then all of a sudden not one of the software recognized my camera anymore. I tried both Firewire 800/400 and USB2 connections using a few different cables. In Skype...(sometimes) it automatically shows the name FV-M10 in the camera slot, but the screen is black. No, I checked if I left the cover on. I checked my Sony WX-5 digital camera and see if that is recognized. Yes, both pics and AVCHD videos are seen using the USB connection.
The problem started like this.
I was downloading a file. Had to work for an hour and when I came back upstairs. I noticed that the screen was frozen.   So, I shut the Mac down. And when I started it again, well nothing happened except for a grey screen. A half~sized cursor was stuck up in the top left. But, my mouse also had a cursor which was movable.
It wouldn't even recognize the OSX Install Disk holding down "C" or "Option". Only starting with "Shift" held down, "Safe Boot" could I use the basics like Mail, Safari, Firefox.   NO sound and no video. Tried a few times as well as cleaned my OSX HD1 hard drive and re-installed from "Safe Boot" mode".   So, I had it sent into Apple Tokyo for repairs.   Apple put in a new board.     Great!      I came it back in two days.   I cleaned the OSX hard drive and re-installed Mac OSX with the up-dates as well and got some of my main backed up stuff Mail, bookmarks, address book etc.   It started fine.     But, when I went to use Skype, iChat, iMovie or Final Cut Express they still couldn't recognize my camera. I had been using the Canon FV M10 camera for a few years with both external hard drives on. There were never any problems until just before I sent it into the shop.
There was only one way to use my camera. Un-Plug the external HD6. Then the camera functions fine. but remember I had been using this camera with both HD's for around two years without any problems.
Notes on symptoms: and what actions I took.
Front connections: FW400 Canon camera. FW800 (Tried connecting HD6)
Rear Connections: USB2 1) MidiMan 2 x2   2) mouse 3) Canon Printer
                               FW400 HD5 FW800 (tried HD6)
With HD6 Connected.
iMovie 11 9.02 : Start iMovie O.K. No camera on.   Turned camera "on" then "No Camera Connected" notice came up.   (did this a few times)   Turned camera off.   Quit iMovie.
2nd start: Camera On.   iMovie freezes.   Spinning Colored beach ball.   I then Force Quit Option-Apple-ESC
iMovie shows (not responding) When I turn off the camera. (not responding) disappears and iMovie is working again. But, "No Camera Connected" shows again. Quit!
Un-Plugged (Ejected) HD6.
When I un-plugged HD6,    (tried both the front and rear connections).   iMovie still on.
"No Camera Connected" I Quit iMovie.
Re-start iMovie: Camera on… Live video and record miniDV tape can both be seen.
Skype: Both live video and mini DV tape recording even plays back over Skype screen.
iChat (same as Skype) O.K.
Since Apple replaced the board 661-3932 Card Video, NVIDIA GeForce 7300 GT which cost just about $X00.00 (¥XX,000).   I assume that they don't also check all the connections etc. I mean from the connector to the video board.
The call to Apple Tokyo today.
Just talked to Apple (Mac) Tokyo about my computer problem. Seems like they're trying to squeeze their way of more repairs by saying I have a hard drive configuration problem.   But it doesn't seem like that!   I worked with it 2~3 hours today...and here is the basic problem.
I've used the Canon FV M10 mini DV camera with Skype, iChat, iMovie and FCEx for few years (HD6) is over a year old-the most recent add on) with no problem.    With both external 1Tb hard drives. And Apple said that it's a 3-party problem. (different makers etc.) But, it's NOT!     Yes, they put in a new board.   But, I'd say the problem is from the connection (where I plug the cable into the Mac) to the board.
When I connect HD6 (1Tb ext hard drive).   FW 800 (either back or front connection) the video camera doesn't work in Skype, iChat, iMovie, or Final Cut Express.     If I eject and Un-Plug HD6 all of them work fine. The camera "live" or the camera playing back the mini DV tape video.
Wouldn't this be a problem between the connections (front & back) to the new video board? Or does anyone have an answer.   Apple seems to have said, "We can't help you".   Please someone help! thanks

+My mini isn't responding to startup commands like "C" or "D" from the keyboard.+
You'll need a wired usb keyboard for these commands to work -- and the Apple Aluminum keyboard won't work either.
But just about any PC usb keyboard will work. Alt maps to Option and Win-key to CMD.

LInks over shape doesn't work

I just recently reformatted my iWeb pages and I love them. The problem is that most of them are buried under a pictures category (I want them that way). When I created hyperlinks in iWeb it changed the color of my font. So I inserted a shape behind the text and put the hyperlinks there.
That doesn't work. I also tried putting the hyperlinks back on the text and when I publish, they don't work either. I like the shapes and don't want to remove them. How can I keep the pink shapes under my pictures page and keep the text white?
http://web.mac.com/kryst1012/iWeb/Krystin/Photos.html

Keep all of your shapes right where they are! To make your text into hyperlinks then, just insert another shape...make it big or small enough to cover your text. Go ahead and drag it right over your text. Now attach the hyperlink to this shape. Now in the INspector,click over to the Graphics tab and change the opacity of this shape to 1%.
You have now created a "hotspot" hyperlink over your text! All without moving any of your other shapes around! Publish and see the results... Let me know if it works out for you!

Artwork doesn't work anymore

I all used to create artwork in Photoshop CS4 then dragging them to the artwork window in iTunes (9.2.1). Suddenly it doesn't work anymore. All I get is a black image, and if I go in Infos, my image is a very small dot that I can barely manage to click and delete. My image resolution in Photoshop is that same as before, 8 bit, RGB, usually around 4 '' x 4 '' at 72-100 dpi. Jpg format in general.
Was there an update at one point what changed to way artwork can be import or translated in iTunes. It's getting annoying

There are a few other threads on this. I too usually use photoshop to clean-up/scan/create almost all of my cover art. So not being able to drag and drop- especially when this feature has always worked before, is a huge pain/problem.
You can no longer drag drop or even cut & paste art from photoshop into itunes. Also, you can no longer copy art FROM itunes into photoshop.
I hope this is something that apple will fix, but I wonder if they even care that this is a problem...

Red Eye Tool doesn't work in ACR 4.1

The Red Eye tool doesn't work on my computer in Camera Raw 4.1/Bridge. When I choose it, the Pupil Size and Darken sliders appear but nothing happens when you try a correction. If I open the same image in Photoshop CS3, the Red Eye control works fine. How can I get it to work in in ACR?

Ramon is right. Best to select the whole eye (even eyebrow) and you'll get the overlay box around the red. If it doesn't entirely cover the red (or if it box bounds some reddish eyelids) you can click and drag to widen(lessen) or lengthen the box and change the 'pupil size'. And so far I haven't found any, even bright, redeyes where the 'darken' control won't get a good dark result. [Animals (green/yellow eyes) are a different story.] Sometimes going too dark will also darken the irises. With the 'show overlay' unchecked you can drag the 'fix' off the eye onto the cheek to see the pattern - dark in the center and then a gradient fade of dark going out from center. "Clear all" clears all of course and you can start over.

[SOLVED]Something wrong with Locale, "ÅÖÄ" doesn't work in terminal.

If you have this kind of problem stated above in the title, or similar, here is what I did...
Make sure you have correct locale, you'll need a UTF-8 one.
As stated in the install guide(or beginner's guide iirc) do the following:
Uncomment one of the locales in "/etc/locale.gen", it doesn't have to be language pacific if you're only after using UTF-8 which provides more characters than normal ASCII.
then run "locale-gen". Make sure to set your "/etc/locale.conf" to "LANG=en_US-UTF8" of course you can choose whatever locale you want not just "en_US-UTF-8". After that make sure to reboot, it may also work with just log-out and log-in again, but I did not reboot and neither log-out and when back in. If it still doesn't work, run "locale" and "locale-a" if the output is "C" in each column just redo what I stated above, if it still not work, then you have to consult the manual, wiki and if you don't find the problem use a search-engine and if you still don't find answer here on the forums, the people here is really helpful!
Last edited by kalle97 (2012-10-01 17:46:16)

" Okey I uncommented sv_SE.utf8 in /etc/locale.gen ...
You're supposed to uncomment "sv_SV.UTF-8 UTF-8", then run locale-gen (with sudo), not "sv_SE.utf8".
That's what I did.
https://wiki.archlinux.org/index.php/Be … ide#Locale
^ Except that you shouldn't use "echo" in this case. That command works well when you're logged in as root, but for sudo, not so much. Check the file with nano and you'll see that nothing changed. For sudo, use tee.
$ sudo tee /etc/locale.conf <<< "LANG=en_US.UTF-8"
Note: You don't necessarily need "sv_SV" for those characters to show up. Setting a "sv_SV" locale would make programs show up in Swedish instead of English - unless that's what you want. UTF-8 locales will cover those characters just fine (provided that the font from the terminal actually contains those glyphs, of course).
So you mean I can have en_US.UTF8 as locale but still write swedish letters? So the problem is with the font or somthing, not the locale?
If you still have problems, post the output of:
$ ls -l /etc/profile.d/locale.sh
$ curl sprunge.us -F sprunge=@/etc/locale.gen
$ curl sprunge.us -F sprunge=@/etc/locale.conf
$ locale -a
$ locale
Well, I did as the guide told about locale.conf, it doesn't seem to work, even if "locale" outputs correct info now, but I'll try with restarting the X server too, just in case.....

Cover eligibility doesn't work

Similar Messages

Maybe you are looking for