Cover-Flow- and Artist Search-Issue (with Compilations) not in manual

Hello,
I'm planning to buy an iPod classic 80GB, but there seems to be one issue I cannot live with: Albums marked as compilations are not recognized on the iPod classic. This results in the fact that all single songs on a album are represented as an own album in cover flow. In the artist-view every artist represented on one of the compilations is in the list. For people owning a lot of compilations with different artists (eg. "one hit wonders" or unknown bands) the artist search will be practically unusable.
So now I wait for an update fixing this issue. And this is what I would like to ask you: Is there any hope that this issue will be fixed in short time? Because in the classic functional-manual (other than in the 5G iPod manuals) the feature is not mentioned. So I assume Apple left out this feature intentionally
Thank you and best regards, Jens

And this is what I would like to ask you: Is there any hope that this issue will be fixed in short time?
Since non of us work for Apple we would have no idea.
But, the more people that let Apple know about this, the more chance we have of that feature being restored.
iPod Feedback.

Similar Messages

Cover flow and album sort issues

I just got a 80GB iPod classic for Christmas and I have noticed some annoying differences between iTunes cover flow and iPod cover flow:
1. In iTunes cover flow, when you have songs with "Unknown Album", they clutter up the cover flow for each artist. In iPod cover flow, they are sent to the back of the cover flow in a nice little "Various Artists" cover. I like how this works on the iPod better.
2. iTunes cover flow sorts by album artist, so you don't see a separate album for each non-album artist song.
For example: If I set my album artist for the Saturday Night Fever soundtrack to "Saturday Night Fever" (don't ask why, this is how i like it sorted) then I will only see one "Saturday Night Fever" rather than one for Bee Gees, one for Kool & the Gang, etc.
iPod cover flow sorts by artist, so you see a separate album for each non-album artist song. I like the way this works in iTunes better.
3. When sorting by "Album by Year" in iTunes, syncing the iPod doesn't seem to follow the same sorting. Albums are still sorted on the iPod alphabetically. I want them to sort by year on my iPod.
So I would appreciate it if someone could help me with all 3 of these issues. As you can see, sometimes iTunes is better for me, sometimes iPod is better for me.

3. Playlists should be sorted in the same way as they are in iTunes. The Cover Flow order is fixed.
This is not the case, at least not with iTunes 7.5.0.20 and my 80GB Classic running 1.0.3 on it (current version as of this writing). In iTunes, under LIBRARY, I select Music, and I have my music sorted via *Album by Year*. This works perfectly in iTunes. I'll use my Soundgarden library as an example, as it shows the problem nicely.
*_iTunes order_:*
Ultramega OK
Louder Than Love
Screaming Life/Fopp
Badmotorfinger
Superunknown
Songs From The Superunknown
Down on the Upside
A-Sides
That's ordered by date and is perfect. +Ultramega OK+ was released way back in 1988, while A-Sides was released nearly 10 years later in 1997. In Cover Flow View it works great. However, in the iPod it's sorted alphabetically, which is completely wrong:
*_iPod Classic_:*
A-Sides
Badmotorfinger
Down on the Upside
Louder Than Love
Screaming Life/Fopp
Songs From The Superunknown
Superunknown
Ultramega OK
This is totally wrong. And I haven't yet found a way to force it.
Apple, please, this shouldn't be that difficult.

Album and artist showing in itunes, but not in manual sync

I have a 8 gig ipod touch and my library is larger so I have to select to manually add artists on my ipod. The problem is the artist I want isn't appearing in the artist section in sync. the artist is in itunes library but will not appear and doesn't come up in the search bar.
Can anybody please help me fix this issue, I need to listen to some Sublime.

perhaps what turingtest2 suggested in another thread helps:
To display all artists in the Artists menu on your iPod, even those who only appear on compilations, remove the ticks against both of the iPod Compilation menu items, i.e.
Settings > Main Menu > Music > Compilations
Settings > Music Menu > Compilations
Cover flow should remain the same, with all compilations albums listed at the right-hand end.
To display all artists in the Artists browser column in iTunes turn off the preference to Group compilations when browsing. Provided you have set the Album Artist field the albums should remain grouped together.

Cover Flow and Artists names

I own a 16GB Touch but recently got an Iphone 3G and they both have the same issue. When viewing coverflow with a compilation, the artist displayed is from the first song regardless of which song is playing. If you rotate to portrait the correct artist for the song is displayed. Rotating back to coverflow the artist reverts to the first song on the album. Is there a setting or something I've missed to remedy this or is it a bug in coverflow?

Thanks, jere7my.
In other words, I should always make changes to my song text with the Cover Flow view selected.
I would never have the Cover Flow view selected while importing new albums, tracks, and artwork. I switched back to it after I was done personalizing my stuff. Thats when I started to notice they were still in lower case, even though I had changed them.

Cover Flow Sort Problem To Do With Compilations?

Hi,
I just had a thought. Do you think the problem we're having with Cover Flow on the iPod Nano is to do with "Part of a compilation" not being ticked in iTunes?
If you bought one movie soundtrack Album that has a different Artist for each track, should "Part of a compilation" be ticked in iTunes, even if you've set the Album Artist to "Various Artists"?

No. does not help. The Compilations-Checkmark brings the files in a folder and not one level up. So the iTunes folder is a little cleaned up.
mk

Iphone pauses and flips to cover flow and back with other earphones

If I use any other earphones than the ones that are provided, my iphone pauses and plays randomly, and flips to cover flow and back without any movement... any help?

Connect the two devices that are showing large backups to your computer and check the capacity guage in iTunes to see how large "Other" is. Sometimes this can grow to be extrememly large, requiring you to restore the device to reduce it to a more reasonable level (approx. 1GB).

Cover flow and Album Art Peculiarities

Ordinarily when I import an album into iTunes, all the songs on the CD are consolidated under a single album cover reducing the number of instances of art in Cover flow. As iTunes plays down through the list of songs, the same album cover is displayed in Cover flow. I can also see the next album in the que on either side of the album currently playing.
Lately though, I'm seeing an instance of album art for each song on an album. For example, if there are twelve songs on the album, there will be twelve instances of the album art work in Cover flow.
I have looked carefully at the song/album information to ensure it is consistent for each song on the album and it all appears to be same so I've just about given up.
I like to scan in my own CD covers to get the highest resolution artwork possible (generally 175k in size) and because it can be very time consuming, I no longer ask iTunes to search for album art.
I select the entire list of songs in the album and perform a Get Info and drop the artwork onto the Art well and Cover flow will react in one of two ways; it either consolidates all songs under a single piece of art or it will display the art for each song on the album!
What am I doing wrong?
G4 Dual Mirrored Door

For the instances where you are getting multiple album art showing in Cover Flow, are those songs from a compilation album? If the artist name isn't exactly the same for each song, iTunes will list them individually. You will have to: identify them as a compilation or alter the tag info or use the Sorting option to group them together.
Diane Wordsmith

I am using an early 2008 MacBook Pro and am having issues with it deleting text on its own (in word, emails, etc.). As I am typing it all of a sudden starts deleting and I can't stop it. What can I do?

I am using an early 2008 MacBook Pro and am having issues with it deleting text on its own (in word, emails, etc.). As I am typing it all of a sudden starts deleting and I can't stop it. This happened once before and it was due to a buldging battery pressing on the track pad. I checked the battery and it appears to be fine. What can I do?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Please fix cover flow and quick look asap.!

Maverick upgrade put my cover flow and quick look unuseable. shows wrong Icon for file. I ran disk utility several times to no avail.

Apple probably don't read this user forum, so submit feedback if you want to talk to them directly.
http://www.apple.com/feedback/
This is a place to get help from other users, so if you can provide more info we may be able to work it out, otherwise you will be stuck waiting for it to work itself out or for Apple to change something.
This app will create a system report that could highlight what is happening on your system (it's possible for old software to break new code on Mavericks).
http://www.etresoft.com/etrecheck run it & paste the output here.
You should try Quicklook with several files of different types to work out what works & what doesn't. Look for patterns too, e.g. Do jpegs on the desktop work but not when they are inside you Pictures folder.
What exactly did you run in Disk Utility and did you do that when booted from the recovery partition?
Have you rebooted since installing Mavericks?
I would also recommend trying a 'safe boot' to see if Quicklook works in that reduced mode (not everything works in safe mode so don't be alarmed if an app won't open etc).
https://support.apple.com/kb/HT1564

I am using system 10.8.2 and have an issue with the screen saver not filling the screen. the desktop does, but not the screen saver. I find adjustments for the desktop, but not the saver. Would appreciate any suggestions.

I am using system 10.8.2 and have an issue with the screen saver not filling the screen. the desktop does, but not the screen saver. I find adjustments for the desktop, but not the saver. Would appreciate any suggestions.

I have a group of my images that rotate, and yes it happens oneach. I do believethat I have at one time had the images cover the entire screen, however I cannor remember how I made that happen, just like the desktop. I am sure it is old'ites setting in!

I have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3

i have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3.
the problem is best explained on the following one - page thread:
https://discussions.apple.com/thread/3951518?start=0&tstart=0
(Clearly i'm not alone in this problem, although i think i figured out what's going wrong a little more than he did...read on!)
his solution, to put mainstage in jump mode, is very unsatisfactory to me, as it bounces all of a sudden to drastically different settings.
basically, my analysis is that my controller is NOT receiving MIDI date from mainstage. in other words, mainstage knows what my controller is doing, but my controller doens't know what mainstage is doing.
let's say i turn the knob all the way to the right ... 127...and the virtual fader goes to the right like it's supposed to.
now...next...let's say i change to a different patch, where that same VIRTUAL fader is not at the max clockwise position..maybe it's only at 1pm. now when i turn the physical knob to the RIGHT, the midi data is still at 127 on the controller! it didn't "reset" to sync up with the new level (say 80 or so) setting on the new patch. so i can't increase that new setting of 80 by continuing to turn the knob to the right. i have to turn it all the way to zero,...and then continue PAST zero until the controller thinks that IT is at 0...at that point the controller and mainstage are in agreement, and things work fine....so bascially, the keyboard thinks the level is at max...but mainstage thinks the level is at 1pm.
i am using Logic 9, and i have a macbook pro 2.9 Ghz I7 with 8 gigs of memory and OS X 10.8.4

Hi Josh,
Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
Thanks.
Mike Towns

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for the HP driver when i boot up. It also will not save in any print or postscript format. Does anyone know how to fix?
Currently use a Mac with the latest Mavericks 10.9.4

Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
Tamara H.
Follow us on Twitter @VZWSupport

I have Iphone 5 and have an issue with deleting part of the messages in Imessage conversation. The trash button is not displayed to delete part of the imessage. I see only delete all option. Is it a bug?

I have Iphone 5 and have an issue with deleting part of the messages in Imessage conversation. The trash button is not displayed to delete part of the imessage. I see only delete all option. Is it a bug?

Hi An Iphone user,
If you are having issues deleting a specific message from an iMessage conversation (not seeing the Trash icon), you may want to double-check that you are following the steps outlined in the following article:
How do I delete a message?
To delete a message, tap and hold the message bubble, then tap More.
Tap Delete All to delete all the messages. Or tap to select the messages you want to delete, then tap .
After you delete a message, you can recover it only by restoring from a backup.
Send messages with your iPhone, iPad, or iPod touch - Apple Support
Regards,
- Brenden

Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I am operating with CS4. Photoshop produces an error " Could not complete your request because photoshop does not recognize this type of file"

Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I have operating with CS4. Photoshop produces and error " Could not complete your request because photoshop does not recognize this type of file"

Assuming you mean 5D Mark III, Photoshop CS4 cannot directly open raw files from your camera.
Generally speaking, Adobe stopped updating older versions to be able to read raw files from newer cameras when they released a new major version of Photoshop. Photoshop CS4 is no longer receiving Camera Raw updates.
You can double check this yourself:
First you need to determine whether Adobe has released support for your new camera in your version of Photoshop. To do that, look at these two pages. You'll want to find out the earliest version of Camera Raw that can support your camera, then what version of Photoshop can run that version of Camera Raw.
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
If you find your camera is supported by your version of Photoshop, you need to download the latest update for Camera Raw. There's more information on how to do that here:
Keeping Photoshop Up-To-Date
If your version of Photoshop cannot support your camera, you can download and install the latest version of the free Adobe DNG Converter, which can take your raw files as input and put out DNG format files, which your version of Photoshop can open.
Photoshop Help | Digital Negative (DNG)
The DNG converter DOES work, but if you want maximal quality from your raw files (not to mention the convenience and ease of use of directly opening your raw files) you'll want the latest version of Photoshop. Adobe has made substantial improvements in raw conversion quality in recent years.
-Noel

Next and previous button issue with Prettyphoto in filtered gallery

Hi there,
I'm stryggeling with a next and previous button issue with Prettyphoto in filtered gallery.
Like to have it like this: http://demohtml.templatesquare.com/think/portfolio.html#!prettyPhoto
(next and previous buttun are there as well social connection)
My problem is this: http://finca-sonrisa.bitl.nl/sonrisa_gallery.html
(social connection is there but no next and previous buttons??)
Anybody who has a solution fot this. Have tried to change the CSS, Javascript and has followed the instructions from Prettyphoto but without any succes.
Your help we muchly appriciated,
Best Regards,
Rolf

bump PLEASE HELP

Cover-Flow- and Artist Search-Issue (with Compilations) not in manual

Similar Messages

Maybe you are looking for