Cover Flow annoying when trying to adjust volume during a workout

When I want to adjust a song that might be too low or too loud and my nano's on the arm band how do you lower or raise the volume when it switches to cover flow? It tends to switch easily and I have to try and get the nano to be more vertical to try and adjust the volume. When it's slightly at an angle the cover flow comes out and then it starts to switch the covers. Is there a way to disable cover flow. It's kind of useless to me in a nano. Only place it truly works is on an iphone. Anyways any ideas or does this have no resolution. BTW I loved my older nano, but it broke down and got this from the holidays.

It annoyed the crap out of me too. plug your ipod into itunes and get any updates if available. otherwise these options will not show up on your ipod
then go to settings>general>rotate>off
enjoy

Similar Messages

Volume showing a lock symbol when trying to adjust volume

Hi, I have a Z10 running 10.3.1.1565 and have the following issue that appeared out of nowhere. When I try to adjust volume it will not adjust the volume and there is a lock symbol next to the volume. Have tried restarting with and without battery pull... but nothing :-(. What is going on and how do I fix?

Have you tried adjusting in Settings >Main Volume?
Do you have Parental Controls enabled?
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

ITunes 9.2 bug - Cover Flow flickers when browing through song info window

I am running iTunes 9.2.0.61 on Windows Vista 64-bit.
I am in my music library, and have the Cover Flow view enabled. If I select a song from my music library and go to "Get Info", I get another window that pops up showing me the details for that song. If I press the "Next" or "Previous" button in the Info window, the Cover Flow window flickers with every press. Every time I press one of those buttons, I briefly see either my Movies window or Apps window. It then returns to the normal Cover Flow view. It will only flicker when pressing one of those buttons. If I'm in Cover Flow and using the slider, it does not flicker.

You r not alone Rob! I just posted the same complain in a previous thread...
http://discussions.apple.com/thread.jspa?threadID=1121028&tstart=0
yeah..i just hope this whole Coverflow problem,along with the ridiculously slow menu response is fixed b4 my 14 days return period is up, if not...this iPOD is going back and am going back to my iPod Photo!

Cover Flow Slow when browsing - but works just fine if internet is open

Hi:
I have installed and am using itunes 7.0.2. When I select the Cover Flow view, the album covers come up and everything seems to work but there is a major lag and my dual core processor computer running Windows XP MCE is maxed out at between 70-90%. If, however, I open up Firefox or Thunderbird and then try it, my processor chugs along at 10-17% and everything in itunes works without any lag at all. Shutting down the internet connection brings the lag and system resource hogging back to critical.
Any ideas what is happening or how to fix it?
Thanks

Did you post from the system that has the problem? (Your "More System Details" list shows Flash 11.7 instead of 11.8 for some reason.)
This is some standard guidance that addresses the most common issues with Flash in Firefox. I'm sure you've seen some of it before, but just in case:
(1) Make sure all recorders/downloaders that interact with Flash media are as up-to-date as possible, or disable them.
(2) Disable hardware graphics acceleration in Firefox and in Flash ''(I see from your post that you've done this part)''
(A) In Firefox, un-check the box here and restart:
orange Firefox button (or Tools menu) > Options > Advanced > General > "Use hardware acceleration when available"
(B) In Flash, see this support article from Adobe: http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues
(3) Disable protected mode (Windows Vista/7/8)
See this support article from Adobe under the heading "Last Resort": [http://forums.adobe.com/message/4468493#TemporaryWorkaround Adobe Forums: How do I troubleshoot Flash Player's protected mode for Firefox?]

When adding a time to an event in the calender in the new ios7 the page scrolls up when trying to adjust the time .How do I finely adjust the time without the page moving upwards?

When entering an event in the calender the page scrolls up when trying to enter and adjust the time,how do you adjust thge time upwards without moving the page?

I see no direct connection.. a printer and the computer setup for internet are not related.
But it sounds like the router in the wife's office is now in the wrong mode..
If you have an existing main router replace the second router for a switch .. that is the easy way.
Otherwise you need to bridge the router if it has that option.. most do not. Or use wan bypass.. where you turn off the dhcp server in the router and fix its ip to match the range of the main router.. this is the hassle of using router as a switch.
BUT I am making a huge number of assumptions.
What I need is the full network layout.. a quick picture would help.
I need main modem.. main router.. (maybe same box or different).. make model and current IP address and how dhcp is setup.
I need secondary router.. if that is what it is, IP and settings.
I want the printer type and model. How it is connected.
BTW I much prefer to see a network printer plugged into the network rather than usb.. it is only a matter of sorting the IP settings and driver pointing to the network rather than local.
Or you should think of it as a broken washing machine and call the technician.. who could fix the whole lot in an hour.

Cannot adjust volume during calls on iPhone 6 (using EarPods)

I cannot adjust my volume on the iPhone 6 during the call on the EarPods. I can only adjust volume while the call is ringing or before a call, but once the person picks up, neither the phone's buttons or EarPods would adjust volume. It's once when I hang up and my music starts playing again, the music blasts my ear from the volume change I did (during the call).
The volume button works fine during calls when I don't use any earphones.
Is there a way to fix this?

Good Afternoon lopakamac,
If you are having trouble hearing a conversation on your iPhone, try the following steps:
If you can't hear a person on a call or voicemail or if the sound quality is poor on iPhone - Apple Support
http://support.apple.com/en-us/HT203800
Turn up the volume
While you're on a call, adjust the volume with the volume buttons:
Also while you're on a call, make sure that you can see the volume indicator on the screen when you press the volume buttons:
Check the connections
If your iPhone is connected to a headset, you won't be able to hear through the iPhone receiver or using speakerphone. Follow these steps, testing after each.
Make sure that you don't have anything plugged in to the headphone jack or the dock connector.
Go to Settings > Bluetooth and turn off Bluetooth.
Clear the receiver
The iPhone receiver won't work properly if it's blocked or dirty. Here's where the receiver is:
Follow these steps, testing after each:
Make sure nothing is blocking the receiver, such as a case or film.
If you have a new iPhone, remove the plastic film on the front and back of the device.
Check the receiver opening to see if it's blocked or dirty. If necessary, clean the receiver opening with a clean, small, dry, soft-bristled brush.
While you're on a call, turn on speakerphone. If you still can't hear, then your network or reception could be the issue. Try calling again later or from a different location.
Restart and update
Restart your iPhone and test again.
If there's still no sound or poor sound quality, update to the latest version of iOS.
Get more help
If you've tried these steps and there's still no sound or poor sound quality from your iPhone, contact Apple Support.
Last Modified: Feb 11, 2015
Regards,
- Judy

Aperture 3-- photos disappear when trying any adjustment

A series of RAW photos cannot be adjusted--anytime I try any adjustment the photo disappears and will not reappear until I go to EDIT and UNDO the attempted adjustment.
I have tried reprocessing all masters, etc., to no avail.
The camera and lenses are all the same I have used in the past and have no trouble making adjustments--just one series of photos.
Anyone with similar problems or suggested solutions? Help is sincerely appreciated!

Trying to get my head around this one. When you say the photo disappears, do you mean that it disappears from the browser?
The only way I have been able to replicate this is as below.
RAW is visible, with adjustments applied:
RAW is not visible:
Make sure that the search field is clear.
An obvious one I know...
Tony

Error: Invalid Parameter when trying to extend volume in Windows Server 2012

From VMware, I added space to a Hard Drive to a Windows Server 2012 VM. I then went into the WinServer console, and opened Disk Management. I did a rescan on the disk. It found the extra space. I right mouse click on the Disk,
and choose Extend Volume, choose the available space, and then an error returned of 'Invalid Parameter'.
In Disk Manager, the new larger space is assigned, but Windows Explorer and everything else only recognizes the original smaller size.
EventManager shows Event ID 265: A pointer device did not report a valid unit of angular measurement. Event ID 257: A pointer device reported a bad angular physical range. Event ID 258: A pointer device reported a bad angular logical range.
Anyone have a solution for this problem?

Hi,
Please try to use the command line utility diskpart to extend the drive.
1. Open a command prompt
2. Type in diskpart
3. Type list volume
4. Type select volume #
5. Type extend [size=n] [disk=n]
For more detailed information about diskpart, please see:
DiskPart Command-Line Options
http://technet.microsoft.com/en-us/library/cc766465(v=ws.10).aspx
You could refer to the article below to troubleshoot the issue:
Windows Server 2008 drive doesn’t expand correctly after extending in VMware VI client
http://consultingblogs.emc.com/greggrobertson/archive/2010/05/27/windows-server-2008-drive-doesn-t-expand-correctly-after-extending-in-vmware-vi-client.aspx
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Best Regards,
Mandy
If you have any feedback on our support, please click
here .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Has anyone found a solution to avoid Photoshop crashes when trying to adjust print settings?

Photoshop CS-5 shuts down when I attempt to adjust print settings such as selecting paper profiles. The Adobe forum suggested installing the latest print drivers and updates to CS-5. The updates did not fix the problem.The printer is an Epson 4880 but I have simile problems with other printers. Have two iMacs with the same problems. I have a Mac Book Pro that I did not update to Yosemite and it works.

I myself having this problem, and the solution for this not yet come. But what i do to solve this problem is that , i just import the picture edit on photoshop, to my browser based Photoshop Online Free Editor, and then give print command from there.

When trying to restore volume, does not detect my raid set.

So I just bought a Mac Pro. After setting it up, I finally got my extra 320gb hd. So I back everything up with Time Machine, create a raid 0 set with two 320GB HDs, and then try to restore the machine. The problem is when I try to select the volume to restore the Time Machine HD onto, it doesn't detect my RAID set. How do I fix this?

I'm guessing you created a volume on your raid 0 set? Also, is this an issue with software raid or hardware raid, using the apple raid card?

Circle with diagonal line when trying to adjust keyboard backlight

I have ever since I bought my Early "11 MBP 15" been able to use keyboard backlight in any ambient light conditions, at full or no strenght. However as I tried to clean up something I spilled on the keyboard, a magic key combination rendered the function keys for keyboard backlight useless. Instead I get the circle with a diagonal dash through it. In preferences keyboard backlight is set to on... Please help!

Oh I get it... It's supposed to be off if enough ambient light is around. Guess that makes sense... Covering the light sensor next to the iSight camera dimmed the screen and keyboard light came on!

4th gen. iPod touch restarts when using Cover Flow while playing music

I was just listening to music the past few months ever since I got my iPod touch back in August (and I love it) but for the past week I have been having this annyoing issue when I tilt my iPod touch to use Cover Flow. When I tilt the iPod while playing a song, the Cover Flow (and everything else on the screen) freezes and the music skips much like a CD skipping, then it restarts itself with the dotted circle loading symbol.
I am using a 4th generation iPod touch upgraded to iOS 5.0.1.
I have also noticed it only does this on certain albums by the way; some do it, while most others don't. I think the issue may be with the artwork as it's custom artwork and not artwork downloaded from iTunes.
Any help with this if possible? Thanks.

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again.

Mavericks Cover flow in Finder gets lost

This is a repost from "Lion" category. Fits better here.
"have upgraded to Mavericks, and I am having trouble with Coverflow in the Finder. When I delete files it gets lost, showing previews of files that are not the ones that are highlighted. The spacebar preview seems to work, showing me the actual contents, but the coverflow view is for a different file. Also, if there is a long list of files in the folder, it cannot display the files further down the list.
I was in the middle of a large project, going through thousands of photos in finder, when I upgraded. I had the perfect workflow, using coverflow, and it worked flawlessly in Lion. It seems this got boken in the update."
-crazyBrit
I'm having the same problem. If I navigated away from a folder it was happening with for a while, the ghost perviews in the coverflow would disappear, but it would still happen if I tried to move or delete a file.

Several of my applications (adobe acrobat, CAD) often crash (and need to be Forsed Quit) when I try to open a file using Cover Flow. AutoCAD release the following advisory:
AutoCAD crashes or file navigation dialog boxes close unexpectedly in Mac OS X 10.9 (Mavericks)
Issue
AutoCAD crashes or the open dialog boxes close unexpectedly while using Open or other file navigation dialogs in AutoCAD on Mac OS 10.9 (Mavericks).
Solution
This happens when you use Cover Flow view mode in a dialog box and navigate across folders. This issue will need to be corrected by Apple in a future Mavericks update.
To work around this issue, do not use the Cover Flow view mode in file navigation dialog boxes such as Open, New, Save, External Reference attach, PDF attach, Image attach, Import, Export, etc.
This is particularly annoying when trying to select a particular graphic file to work on. I wind up opening a finder window in Cover Flow to find the particular graphic I want to open and then looking for the file name in List View in the Open diaglog box.

Problem deleting items in cover flow view

Hi,
I recently upgraded to a new MacBook Pro with running Leopard and I thought that viewing directories using "cover flow" view in the finder would be a great new way to quickly browse through folders containing many pictures and deciding what to keep and what to get rid of. However, I've run into a problem. When I delete an item in the directory, sometimes the highlight bar automatically highlights the next item in the list (what I want it to do), and sometimes it just disappears so that when I press the down arrow, rather than just jumping to the next picture in the folder after the one I just deleted, it jumps all the way back to the first picture in the folder. As you can imagine, this can be pretty annoying when trying to sort through a folder of over 600 photos. I can't figure out why deleting an item sometimes selects the next item and sometimes deselects all items, but I would like to find a way to fix this so I can sort through my photos with ease. Thanks for any info.
-Josh

Sounds like a bug. Send Feedback or send bug reports and enhancement requests to Apple via its Bug Reporter system. Join the Apple Developer Connection (ADC)—it's free and available for all Mac users and gets you a look at some development software. Since you already have an Apple username/ID, use that. Once a member, go to Apple BugReporter and file your bug report/enhancement request. The nice thing with this procedure is that you get a response and a follow-up number; thus, starting a dialog with engineering.

Cover flow vs now playing

I've had my iPod touch for about a day now and in general I am impressed with the technology. Like others I use my iPod in the car and have contemplated cover flow landscape mode as the default orientation. However I've noticed that cover flow does not stay in sync with what's playing when the playing song leaves the album displayed onthe flow. Just tip it up and back to landscape and its play until the next album. You can guess how quickly it gets out of sync when it I'd on song shuffle.
Anyone else? Perhaps apple can fix this in the next code release. Along with loosening their tight controls on what we can do on the device.

I'm with you Mike. I'd love to be able to hit Shuffle Songs, sit my Touch in the little plastic cradle thingy, and have Cover Flow change when the song changes (just like it does in iTunes).
The album art stays in sync in portrait mode but you can't sit the Touch in the plastic cradle in portrait mode because the earphones jack is on the bottom.
I tried sitting it in the dock that came with my 4th Gen iPod and hooking the earphones into the line out jack but found that there was no way of controlling the volume (maybe I need a newer Dock?).
So at the moment I'm listening to Silverchair and looking at Jet. Hmmm.

Cover Flow annoying when trying to adjust volume during a workout

Similar Messages

Maybe you are looking for