Cover Flow & Landscape View On Photo and Camara not working

Cover Flow & Landscape View On Photo and Camara not working.
Reset the iPhone. Made iTunes lib manual. Still does not work.
Help.

do you have the portrait lock on?
double click the home button to bring up the mutitask bar. slide it to the left and there is a portrait lock and ipod controls. Make sure it is not locked. If this is not it i would try a hard reboot.

Similar Messages

  • Itunes, ipod, photos and cotracts not working after safari crash

    My Iphone is about 2 weeks old. It was working fine until 2 days ago. I was browsing when safari crashed. I restarted safari and continued surfing. Later I went into ipod to listed to some music. The songs were on the screen but the ipod game an "unable to play" message. I shut down the iphone and started it up again. This time when I try to go into ipod it just crashes back to the spring board. when I click on Itunes it does the same thing. I clicked on photos and there no photos. turned on the camera and took a couple of Pictures. I looked at the camera roll and they showed up as just outlines of blank icons. Cicking on the icons gives an all black screen. Going out of the camera then into photos shows no pictures.
    I called Tech support and was told to do a restore. I then plugged the Iphone into the dock and was not recognized by itunes. Interestingly Iphoto does recognize it but not itunes.
    I am baffled at this point.

    By any chance did you buy any music from the iTunes wifi store before this happened? I am having problem that sounds similar; but in my case the iPod function shows "no content", and all photos are gone; but notes, calendar and contacts are intact. I also cannot get iTunes to recognize my iPhone to do a sync or restore.

  • Help Viewer in Finder and iTunes not working properly

    When I click on any of the links in the Finder help viewer, nothing happens; if I type something in the search box, a list of topics display but if I click the show button for any of them, nothing happens. Same in iTunes. Looks like my help is screwed up with Apple apps. Any suggestions?
    Thanks
    Yvan

    Hi Danycom,
    Try this... locate these files: com.apple.help.plist and com.apple.helpviewer.plist and com.apple.recentitems.plist and
    There are located here:
    /Home/Library/Preferences. Open the Preferences folder, locate those files and drag them to the Trash. Empty the Trash and reboot. This fix should also correct your iTunes Help Viewer also. If this doesn't do the job, post back and we'll dig deeper!
    Carolyn

  • Why do my image previews in cover flow folder view option look terrible?

    Recently upgraded to OSX 10.6 Snow Leopard and have noticed that image previews look terrible in the cover flow folder view option - work with image files numbering in the thousands and really need this option to work - dosen't seem to matter how long I give the machine to process the preview and can find no consistency in the file type or format the machine seems to have trouble with

    ~/Library/Caches. Quit all applications then delete this folder. If a normal delete doesn't work, do a secure delete (Finder > Secure empty trash {this will take longer})

  • Low-rez or no thumbnails in Cover Flow & Icon views!

    Cover Flow used to display sharp and clear high-resolution jpeg previews, but now it display either low-rez previews for most or nothing at all for some. In Icon view, the Finder used to be able to generate thumbnails for jpeg files that don't have icons, but now many jpeg files are just blank in Icon view.
    Does this have anything to do with the newer updates?

    This problem hit me suddenly about two days ago. Can't seem to fix it. Haven't tried rebuilding Spotlight index yet, trying to avoid it, but that might solve the issue. Perhaps before I leave for the day that's what I'll do, and see how things are in the morning.
    FYI, others have this issue as well:
    http://discussions.apple.com/thread.jspa?messageID=6677811
    http://discussions.apple.com/thread.jspa?messageID=7144284
    I'm sure there are more around...

  • I was using the newest version on OSX 10.7.5 and I was in full screen mode and viewing a photo and it was impossible to exit full screen. This happened at 11:03pm on Friday April 12, 2013. How to fix

    I was using the newest version on OSX 10.7.5 and I was in full screen mode and viewing a photo and it was impossible to exit full screen. This happened at 11:03pm on Friday April 12, 2013. I deleted this from my apps and then deleted iphoto from my purchases in macbook app store the search it the app store and it says it has still been installed. What can I do to fix it?

    Well deleting it from your machine was not the way to go.
    Deleting it from your Purchases List was definitely not the way to go.
    So, I'm not really sure how you're going to reinstall it.
    But figure that out and we can try help. Contact App Store support. There's a link on the right hand side of the App Store Window. They should be able to get it back on your purchases list so you can reinstall it.

  • I cant view my photos and videos in my ipod

    hello peps!
    can u pls help me..why can;'t i view my photos and videos in my ipod touch?
    many thanks!
    janna bebe

    If you have a boot SSD, no way.
    If you have a boot hard drive, not Filevaulted, you can STOP using the computer as it writes to the drive all the time.
    You then have a choice of taking your computer to a local PC/Mac repair shop, and say you need "Data Rescue" to recover deleted files out of a deleted Guest Account, it will cost a few hundred dollars.
    Or you can do it yourself, for a external hard drive (blank) and $100 Data Rescue type software.
    Create a data recovery/undelete external boot drive
    When you install OS X on a external drive, you won't be booting into OS X that has the deleted files, just the Recovery HD partiton that's seperate.

  • Where do I go on iCloud to view my photos and videos?

    Where do I go on iCloud to view my photos and videos? I have my iCloud account open but there is no shortcut for the camera roll?

    Photo Stream can not be viewed from iCloud.com.
    To view Photo Stream you need a an iOS device running iOS 5.1 or later, a Mac running OS X 10.7.5 or later, or a PC running Windows Vista or later (via iCloud Control Panel).
    iCloud: My Photo Stream FAQ

  • HT201317 My shared photo album will not work. I am trying to upload photos but I doesn't show up in my new device. I've done it before but now it's not working. My old device is a 4s iOS 7.1.1 and my new one is a 5 iOS 8.1.1. How can I make the pictures s

    my photo stream does not work at all. I've tried making a new album, but that does not work. So I've tried using an already existing album and deleting the pictures there. I decided to only upload 1 photo from my old phone (iPhone 4s iOS 7.1.1) to see if it'll show up on my new device (iPhone 5 iOS 8.1.1) it doesnt even show up in my new phone (iPhone 6 iOS 8.1.2) this picture is what shows up on both my iPhone 6 and 5 but on the 4s there is a picture that I "uploaded" and a second one that came out of nowhere. I do not know what to do because in the past this has worked out for me and it shows up on all three devices

    You can't restore to a backup that was taken on a device which has a higher version of iOS than on your iPad, you will have to update your iPad to 8.1.3 to be able to restore to it
    You should be able to update your iPad via Settings > General > Software Update

  • How do i get my photos to stream to my iPad in the events that were oringally created.  Right now they are streaming as photos and are not grouped at all.  I would like to get them back into the events that were originally created

    how do i get my photos to stream to my iPad in the events that were oringally created.  Right now they are streaming as photos and are not grouped at all.  I would like to get them back into the events that were originally created

    Hi..
    Thanks for the reply..
    My original I Phone 5 was running IOS 6.12
    My I phone 5S currently runs IOS 8..When I upgraded it, it had IOS 7 on it which made the I Photo app compatible with everything below IOS 8...( which the photo app is not compatible with ) so I just connected the I Phone 5S to my computer and thinking the new phone had IOS 7 on it that these was nothing to worry about..I thought all 900 + pictures in the photo stream would transfer but somewhere in the process, I Tunes decides to just go and install IOS 8 which requires that you run a " Photo Migration App" to transfer photos from IOS 7 & below. The problem was is that I didn't want IOS 8 on my new 5S so I thought I wouldn't have to do that part..
    Anyway the phone emerged with IOS 8 on it and the only photos that remained were the ones that were actually on the phone..The 900 + I had in the stream didn't transfer because the Photos that works on IOS 7 and below isn't compatible with IOS 8..I guess you have to use the photo migration app that comes with IOS 8 & I phone 6..But I didn't ask to upgrade to IOS 8...It just did it on it's own!
    I still have the I Phone 5 Back up that I did just before giving it back to Verizon but if I try to restore the I Phone 5S running IOS 8 those photos in the stream will not go back on the phone because IOS 8 isn't compatible with the I Photos" that ran on IOS 7 and below..
    So I have an I Pad mini that runs IOS 7..should I try and erase it...and put that I Phone 5 backup on it and pray the photos that were in the stream come back on it so I can transfer them back to my computer...then erase the I pad mini again and restore it using it's original backup that I have on the computer and the in the cloud?
    I know this sounds confusing but I'm at a loss as to what to do..This is what I found ...http://support.apple.com/en-us/HT201386
    but it doesn't help me..
    Steve

  • Cannot load Photoshop Elements 10. 1st (of 3) disks only gives me option to import photos and videos, not to install. How can I install?

    Cannot load Photoshop Elements 10. 1st (of 3) disks only gives me option to import photos and videos, not to install. How can I install?

    Are you sure that:
    1. You have the correct disc for your operating system? You have both mac and windows versions on the discs. If you have a mac you want disc 3, not disc 1.
    2. PSE is not already installed?

  • My Lightroom 3 closed after trying to edit a photo and will not open again.  Help please!

    My Lightroom 3 closed after editing a photo and will not open again.  It says Lightroom is not working and Windows is looking for a solution.  I am in a bind and need my Lightroom opened asap.  Please help!

    In your operating system, go to the folder where your Lightroom catalog is stored and see if there is a file that ends with .lock
    If so, delete it and then LR will open properly.

  • TS3003 Installed QuickTime7 from Snow Leopard installation disc and still can't view videos on iPhoto. A box appeared saying "you have installed Mac OS X software older than your current version of Mac OS X and may not work properly."  Now what?

    Installed QuickTime7 from Snow Leopard 10.6.8 installation disc and still can't view videos on iPhoto. A box appeared saying "you have installed Mac OS X software older than your current version of Mac OS X and may not work properly."  Now what?

    Download and install the latest QuickTime Player for Snow Leopard > http://support.apple.com/kb/DL923

  • I got a new iphone 6.  When I restore my phone from my icloud backup my most recent photos and messages not restored from icloud backup.  How do I get the most recent backup onto my new phone?

    I got a new iphone 6.  When I restore my phone from my icloud backup my most recent photos and messages not restored from icloud backup.  How do I get the most recent backup onto my new phone?

    Hello, Anita.  
    Thank you for visiting Apple Support Communities.  
    I understand that you are wanting to restore your new iPhone 6 from an iPhone 5 backup.  This sounds like the iOS version of your old iPhone 5 may be newer than what was installed on your iPhone 6.  Try going through the steps in the article below.  
    iOS: Unable to restore from backup of a newer device
    I would also check to see the backup dates in iTunes and if the  backup is located on iCloud instead of iTunes.  
    Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes
    Cheers, 
    Jason H.  

  • Looking for a back up drive for photos and videos that works with time machine, prefer wireless. Time capsule has poor reviews and already have BT hub

    Looking for a back up drive for photos and videos that works with time machine, prefer wireless. Time capsule has poor reviews and already have BT hub that serves as a good router. 3gb or 4gb capacity preferred but 2 would suffice.

    Plug a NAS into the BT Hub that does TM. Look at Synology.
    You just use the wireless of the hub.
    But the cheapest solution is still the TC.

Maybe you are looking for

  • "ipod nano cases"

    These cases for the new ipod nano ROCK! http://www.speckproducts.com/for-nano.html http://playlistmag.com/features/2005/10/04/nanocases/index.php

  • FMDERIVE error commit item

    Hi, I have the an incorrect posting, in a document (purchase order, earmarked funds, FI document, ...) we changed the commitment item from which an FM account assignment was derived before but when we try to post the system takes the before values. T

  • Co-payment of an Order using 2 "payers" - multiple materials

    G'day I am working on a requirement to fix and improve a co-payment process. This was not set up by me - set up simply for a implemtation last year. I am looking at alternatives with less problems. The scenario is that a patient orders medical goods,

  • Line missing in the Manifest file

    Hi, I've encountered a problem when creating a Manifest file. My file is named 'mymanifest.mf' and it's as below: Manifest-Version: 1.0 Class-Path: .;htmlparser.jar;xerces.jar Main-Class: Mymainclass Then I type the command in the command-line window

  • Call dll from plsql

    Hi I am trying to connect an external program(DLL) from pl/sql. for the practice i trying to call "GetComputerName" from kernel32.dll. i made the following step 1. Creating a library . 2. Creating a package . 3. Set the listener.ora 4. Set the tnsnam