Cover flow on computer doesn't work.

I am on a PC. When I attempt to use the Cover Flow display option my screen looks like this.
I just updated to the latest iTunes version (10.3.1.55) and I still have the same problem. Is there a way to fix this?

It is a kernel panic:
http://docs.info.apple.com/article.html?artnum=106227

Similar Messages

Cover flow on ipod nano not working

My cover flow on my ipod stopped working when i plugged in ipod. Have the covers on itunes just not ipod. Also songs skip to next song sometimes also. Could be any song I never know. Seems since i upgraded to new itunes version stuff has been going wrong.

Try checking your ipod settings, i had an itunes one change on its own once. Go to settings, then general, then rotate. If it says "off", then just hit the center button. If it says "cover flow", then see if it's the orientation sensor by going to the "maze" game if you have it to test it. The circle thing on the menu will probably glitch up/not move if it's the orientation sensor. If it responds normally (rolls/slides in the direction you tip the ipod), then i'm not sure. Try calling their customer service line at 1-800-APL-CARE (1-800-275-2273) if that happens. Also, if you are walking w/ it with the hold switch off, then it may me that your walking is shaking it enough to shuffle it. That's my theory, anyway.
BTW, are you're sure the ipod's not too flat for the sensor to register the rotation? I've done that before. It'll register at about a 45 degree angle.

Cover Flow on Windows XP not working, any suggestions?

I recently had a problem with my HP computer (certainly not the first) and had to recover it using recovery disks. Of course I lost everything and when I reinstalled iTunes, the cover flow option wasn't available. I have tried looking everywhere and performing the nesscessary steps to get it to work. It did work before my computer had to be restored. I went to the Microsoft site and downloaded the latest updates. I checked the bit-rate, I guess you could call it and is at 32-bit. I turned up the hardware acceleration to full (it was already up there) and I downloaded a version of DirectX and it still does not work. If someone could help me out it would be much appreciated. I am technology-challenged.
Thanks!
Kate
Message was edited by: kkshfun

Try checking your ipod settings, i had an itunes one change on its own once. Go to settings, then general, then rotate. If it says "off", then just hit the center button. If it says "cover flow", then see if it's the orientation sensor by going to the "maze" game if you have it to test it. The circle thing on the menu will probably glitch up/not move if it's the orientation sensor. If it responds normally (rolls/slides in the direction you tip the ipod), then i'm not sure. Try calling their customer service line at 1-800-APL-CARE (1-800-275-2273) if that happens. Also, if you are walking w/ it with the hold switch off, then it may me that your walking is shaking it enough to shuffle it. That's my theory, anyway.
BTW, are you're sure the ipod's not too flat for the sensor to register the rotation? I've done that before. It'll register at about a 45 degree angle.

Cover Flow Slow when browsing - but works just fine if internet is open

Hi:
I have installed and am using itunes 7.0.2. When I select the Cover Flow view, the album covers come up and everything seems to work but there is a major lag and my dual core processor computer running Windows XP MCE is maxed out at between 70-90%. If, however, I open up Firefox or Thunderbird and then try it, my processor chugs along at 10-17% and everything in itunes works without any lag at all. Shutting down the internet connection brings the lag and system resource hogging back to critical.
Any ideas what is happening or how to fix it?
Thanks

Did you post from the system that has the problem? (Your "More System Details" list shows Flash 11.7 instead of 11.8 for some reason.)
This is some standard guidance that addresses the most common issues with Flash in Firefox. I'm sure you've seen some of it before, but just in case:
(1) Make sure all recorders/downloaders that interact with Flash media are as up-to-date as possible, or disable them.
(2) Disable hardware graphics acceleration in Firefox and in Flash ''(I see from your post that you've done this part)''
(A) In Firefox, un-check the box here and restart:
orange Firefox button (or Tools menu) > Options > Advanced > General > "Use hardware acceleration when available"
(B) In Flash, see this support article from Adobe: http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues
(3) Disable protected mode (Windows Vista/7/8)
See this support article from Adobe under the heading "Last Resort": [http://forums.adobe.com/message/4468493#TemporaryWorkaround Adobe Forums: How do I troubleshoot Flash Player's protected mode for Firefox?]

I bought a song on ITUNES and had problems downloading it. I got in touch with support and and they downloaded the song to my account but now when I try to play it, it tells me my computer isn't authorized to . Reauthorizing computer doesn't work. HELP

I bought a song in ITUNES and had problem downloading it. I contacted support and they downloaded the song for me. Now when I try to play the song, I get a message saying my computer isn't authorized to play it. I try reauthorizing but that doesn't work, just keep getting the same message. Can anyone help?

Hello
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/ts1389
Best of luck,
Mario

Forgot my adminpassword, i have tried the reboot with initial disk doesn't work i can't downlad anything, I am able to log on but the name and password to get in my computer doesn't work for admin password. i am about to give up any suggestions?macbook10

forgot my adminpassword, i have tried the reboot with initial disk didn't work, i am able to get into my computer with name and password, but this same name and password doesn't work as an administrators password when i want to download or change things.
do you have any suggestions? Im about to give up, i can't even access wireless have to use a dsl
pretty sad

... this same name and password doesn't work as an administrators password when i want to download or change things.
It's probably that your Keychain password is not the same as your login password. If you configured your computer to log you in automatically, you may not have used your login password in so long you forgot it.
There is no way to retrieve the "login" Keychain password, but you can reset the Keychain from the Preferences menu: select it in the Keychain Access menu and select "Reset My Default Keychain". This will create a new, empty Keychain but the old one will be saved should you ever remember its password.
The result of this is that you will have to supply passwords for everything that requires it, since without your Keychain they will no longer automatically fill themselves. However, once you supply them and store them in your new Keychain, they will be remembered.

My computer doesn't work

Hi, when i turn on my computer, some message comes and says that ''the last attempt to resume the sustem from its previous location failed. Attempt to resume again'' then it is said to ''use the arrow keys to highlight your choice'' but the keyboard doesn't work and I've changed the keyboard to another one but no one worked. So this is my problem, hope anyone can help me !!!!!

Mac OS X 10.6 Help: If you hear beeps when your computer starts up

Hello, I have purchased Adobe Design Premium CS5 with Acrobat Professional 9.0 with Win License in 2010. Same computer, doesn't work any more?

Hello, I have purchased Adobe Design Premium CS5 with Acrobat Professional 9.0 with Win License in 2010. Last month, the software is deactivated and asked me to reinstall it, however, the serial number I have doesn't work anymore. The computer is still the same, operation system is also the same. Something must be wrong with ADOBE. Can you help to resolve? Or direct me to a right person and number? Thanks!

I tried, the Design CS5 worked that way, but not the acrobat pro. 9.0. I will update with what I was suggested to download again from Adobe volume licensing site. Since my computer is at my work. This is the site I was referred to: Adobe Licensing Website | Serial numbers | Orders | Accounts

Itunes on new computer doesn't work

Just setb up a new Imac and Itunes doesn't work. Says it is because it was copied from a previous Itunes. If want to download just do so, but I don't get an option at all.

Hello Myrita
Check to make sure that iTunes is up to date. Alternatively, you could create a new iTunes library and then import the media that is already on the iMac. The articles below will assist you further.
iTunes: How to open an alternate iTunes Library file or create a new one
http://support.apple.com/kb/ht1589
iTunes 11 for Mac: Import music and video already on your computer
http://support.apple.com/kb/PH12285
Regards,
-Norm G.

The keyboard of my computer doesn't work

**** apple community, i have a very serius problem with my macbook.
Today, i iniciated my computer to start working as usual, but i discovered that my computer do not recognize the keyboard or the trackapd that are attached to it. These are not external devices, they are built in my computer. Also, my macbook tells me that she can not find a bluetooth keyboard/mouse. My Macbook is normal macbook model mid 2009, with OS X (Lion) 10.7.5.
Does anybody know how to fix this?
Thank you for your attention.

So who you're talking to here is a peer to peer network of Apple users.
That said if your keyboard was failing, the power button is integrated into the circuit of the keyboard itself. So it wouldn't be surprising that the power button circuit would fail as well over time.
Normally a repair depot will replace the entire upper case and that's what's probably so expensive. However your Apple store should be able to preform a "Depot Repair" which would be a flat $300.
It is possible to buy a new keyboard for around $30 (Price for a 2011 13".) but the replacement is massively labor intensive. Everything has to come out of the MBP, the keyboard back light has to be carefully peeled away. There are over 80 #0000 Phillips screws that have to come out, the new keyboard carefully fitted and 80 screws put back.
Don't hold me to the 80 screws, I did try to count them but gave up and the count appears different depending on the keyboard.
I've done 3 so far!

Sending multitrack Project from FCP to STP on another computer doesn't work

Hello,
I attempted to search the forums but can't find my specific problem mentioned. I apologize if I overlooked it!
I am attempting to send a Soundtrack Pro Multitrack Project from Final Cut Pro 6.01 to Soundtrack Pro 2.01 on another computer. When I do, the video comes through fine but the audio fails to transfer over.
Here's what I did:
First I open the Final Cut Project, highlight all the clips in the sequence to send and click "Send to Soundtrack Pro MultiTrack Project". I select all options including the "Fully Rendered Video" Option. This project opens up great in Sound Track Pro on the original computer. In Soundtrack Pro I "save as" and make sure I select "Collect Audio Files", "Collect unused audio files", & "Collect Video File". As far as I have read, this should be all I need to make sure all of the audio and video clips transfer together with the STP file.
However, when I place this folder (including the media files) on a external hard drive and transfer it on to our other computer (set up for audio recording and editing) and open it up in STP I get no audio. The clips visually transfer and all the clip lengths match up with the video, however there is no waveform showing. A straight line at 0db is all that shows up. I check the clips in the bin and they show the same file size as on the first computer. When I select an audio clip and take a look at the actions tab it shows the name of the clip and under it it says "insert silence" (which was not there on the original computer). When I de-select the insert silence the audio still does not play (the straight line on the waveform disappears). I try deleting the "insert silence" action and the same thing happens.
I have tried doing this operation mulitple ways with the same result. Am I doing something wrong? The only thing I can think of is the file starts out on OSX 10.4.11 and is transfered over to leopard 10.5. I just tried doing the reverse operation (creating the file from the audio computer and sending it to the video computer) and everything works fine. No idea what this means. I need this to work the other way around so I can begin the extremely intensive audio work on this film while our editor continues the video edits so thank you very much for any help that you can lend me. It is greatly appreciated.
-Matt

Could be a difference in OS's causing the problem, but I can't say for sure. You could try using the OMF export option instead. I almost guarantee it will work.

Cover Flow in Finder doesn't display Preview Annotations

When looking at PDFs using Cover Flow in Finder, the Preview Annotations aren't shown. Both Quick Look and Preview will show them.

It means no other machine on your network is acting a server. Are you trying to connect to a Windows or Macintosh server? If you are trying to connect to Windows, there's no way to browse a Windows network. You have to be in the same WorkGroup to see any servers that way.
SharePoints http://www.hornware.com/sharepoints/ will let you change your WorkGroup. I always change mine to Mshome so I can easily see other people's machines (which are almost always in that WorkGroup).
iBook G4 1.33 Mac OS X (10.4.5) July 2005 Model

Cover Flow Won't Let Me Work Out!

So I have the 4th gen Nano, and when the cases come out that allow me to clip it to my belt, I won't be able to have it horizontally because cover flow will kick in. This is a problem! Apple, fix this please! If I orientate the Nano vertically, I can't read the track names, etc. Help me!

See this thread:
http://discussions.apple.com/thread.jspa?threadID=1721730&tstart=0
(same discussion, more posts)

Cover flow and "enhanced interface" not working on iPod

I have an 80gb iPod classic video and it does not have the cover flow feature or "enhanced interface". I have updated the iPod software to version 1.2.3.
Thoughts?

*there's no way to download this feature?*
No I'm afraid there's not. I think it is safe to say that going on past model changes the interface will not be added retrospectively. As an example, when the Late 2006 version of the 5th Generation iPod was introduced it had a new search feature, this was not added retrospectively to the earlier model. The new changes are much more extensive than that one was so I wouldn't expect to see Cover Flow or any aspects of the new interface added through an Apple firmware update to earlier models.

Officejet Pro 8600 Plus: Scan to computer doesn't work with Win8.1 [solved: problem with USB3 Boost]

Since I installed 8.1 (pro), I can't use my 8600 Pro software for scanning to the computer (via USB). It looks like there is no communication with the printer as for the scanning software, but printing works as usual.
Tried to use the HP Printer Assistant: when I click the "Scan a Document or Photo" button, I get a "Scanner Unreachable" message. Also after a restart of the printer.
When I try to scan from Photoshop, the system first finds the printer but then fails to connect to it.
HP Update says that my system is up to date.
HP Print And Scan Doctor 4.2 finds and shows the printer on the Welcome panel and seems to be able to communicate with it, to a point.
It gives me a "Driver error" (sorry if is not called so in English--it takes over my keyboard language, which is French and says "Erreur du pilote") and states that no communication could be established between the scan driver and the printer, and that I should reboot the computer...
So I did and reran the Doctor software, which gave me the very same error message. This time, I clicked "Ignore" and let it do its things. It ran a "Scan Test" twice and indicated that everything was fine or had been repaired. But strangely nothing happened on the printer during those "tests". And at the end, as it offered me to make a scan test myself, I clicked OK and I had the "Scanner Unreachable" error message again.
So I made my scans on an USB key, as I had to do a few times already, and that went very well. But I'd be glad to have that "Scan to computer" function back. How?
This question was solved.
View Solution.

Hi ajmch,
I am sorry to hear that you are still having a scan issue. What antivirus program are you running on the computer? Can you try to scan through Paint and Windows Fax and Scan on the computer? When you run the HP Print and Scan Doctor what error message are you getting?
In this document for Windows: HP Scan Software Does Not Open or Scan on a Printer Using a USB Connection are steps for checking the WIA and for checking software.
You can also Use the System File Checker tool to repair missing or corrupted system files that may resolve this issue.
Let me know if this helped.
Thank you,
I worked on behalf of HP.

Cover flow on computer doesn't work.

Similar Messages

Maybe you are looking for