Cover for usb

I've lost the cover for the end of my shuffle. It's the cover that covers the usb. Does anyone know where I can get another?

I broke my USB CAP, did anyone ever get back to you? I need one, and they could not help me at the Apple Store.

Similar Messages

Cover for charger alert when is open for Xperia Z2

How to setting the alert for Xperia Z2 when the Cover for charger/USB port is on open pisition ?

The phone can't sense if the cover is open or not. Smart Connect will however give you a reminder to check/close the flap after charging. If you selected the option to not show the reminder again and want it back you can go to Settings -> Apps -> Smart Connect -> Clear data.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Hi, I'm currently browsing the web looking for a case that is compatible with the smart cover for the iPad 2. If anyone has any suggestions I would be glad to read all opinions! Thanks!

Hi, I'm currently browsing the web looking for a case that is compatible with the smart cover for the iPad 2. If anyone has any suggestions I would be glad to read all opinions! Thanks!

I love the Smart Cover. It fits the way I work and I love the instant on/off and the always available screen protection. I wouldn't use my iPad without it.
I got a Cover Buddy for the back, because I wanted the back to be less slippery when I'm using the iPad in the classroom, teaching. I picked this back cover because it's VERY lightweight, easy to get on or off and, protects the corners, has accurate cutouts for the ports, and (in the colors) has a rubberized surface:
http://www.switcheasy.com/products/CoverBuddy/
I have a Built NY "hoody" slip on case with a hard internal shell that I use when I'm in the field and I can put the iPad with the Smart Cover and the Cover Buddy inside this . But for everyday use, the Smart Cover with the Cover Buddy is a terrific combination.

My ipod 4th generation wont show up on itunes or my compute, but there is a file for USB mass storage device in my device management with a yellow triangle next to it. how do i get it to sync? HELP!!!

my ipod 4th generation wont show up on itunes or my compute, but there is a file for USB mass storage device in my device management with a yellow triangle next to it. how do i get it to sync? HELP!!!

Here:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

T440 - DWM service is crashing in windows 7 64 bit after installing drivers for USB Replicator

Dear All,
Good day!,
This will be my first post to the community and looking forward for an expert advise on the issue am facing with Lenovo ThinkPad USB Port Replicator with Digital Video drivers in Enterprise 64bit running on T440, following are the details:
Environment:
Windows 7 Enterprise 64bit installed on T440 where all drivers are up to date for all devices though (System Update 5) tool.
Requirement: Usage of Lenovo ThinkPad USB Port Replicator with Digital Video (M01060) which will be connected to .
Steps followed:
Connected to the port replicator before installing the device driver.
Download and installed device driver from the link: http://support.lenovo.com/en_US/downloads/detail.page?&LegacyDocID=MIGR-73088
3. Issue: After installing the device driver above, system reboots and after logging back using the local admin account or any other windows account (DWM service) crashes along with any other software installed (Ms. Office, Lync, IE9, ...ext). Tried uninstalling the driver, rebooted and Windows runs smoothly again back with no errors.
4. Questions:
T440 hardware compatible with Lenovo ThinkPad USB Port Replicator with Digital Video ?
Which USB version Lenovo ThinkPad USB Port Replicator with Digital Video has ? (2.0 or 3.0) ? did I missed some special drivers for USB ?
Any other links for the above driver can be found for Win 7 Enterprise 64bit ?
For 3 days, am searching the web for a similar issue, found and followed all troubleshooting steps mentioned by others but none of them helped. I will really appreciate your support if any expert can advise. Thanks in advanced

I have the same problem with my T400 updated to Win 7 pro. Not happy.

I am doing a cover for O.M.G. by usher and it requires 4 to 5 different vocal layers. My first "line" of vocals keeps disappearing even after i save it. So I have to redo everything on the top line. Any help?

I am doing a cover for O.M.G. by usher and it requires 4 to 5 different vocal layers. My first "line" of vocals keeps disappearing even after i save it. So I have to redo everything on the top line. Any help?

For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa

Do I need a different back cover for wireless charging with the Droid Turbo?

Do I need to get a different back cover for Qi wireless charging on the Droid Turbo? Or do I just need the charging pad?

One thing to Remember there's usually a Sweet spot that the phone has to be right on to make it work, And just to be aware some wireless chargers can cause Warmness in the Battery and the Backs of the phone..
Here is some Accessories From Motorola for the Turbo: Just click on the blue Link
Power - Smartphone Chargers and Portable Chargers by Motorola
Music
Talk
Motorola

Where can I buy a slot cover for my Mac Pro?

I need a slot cover for my Mac. Any idea where I can get one?

These folks have cases and parts and first place I check.
http://www.dvwarehouse.com/Mac-Pro-Cases-and-Parts-c-25351725190.html

NI-IMAQ for USB 1.1.1 will not install with LV8 and Vision 8.0 or 8.21

When I try to install NI-IMAQ for USB 1.1.1 I get a message that vision 7.1 or higher with Labview 7.0 or higher; or Vision Assistant 7.1 or higher is required, I have tried the vision 8.0 and vision 8.2.1 packs with Labview 8.0 with no success.

Hello mcg,
I am not familiar with NI-IMAQ for USB 1.1.1. The newest version I know of that we have is 1.0 at the following link:
NI-IMAQ for USB Cameras 1.0
You are correct that you need LabVIEW 8.0 and Vision 8.0 installed. After this you should be able to install this very simply. If that's still giving you trouble, try repairing LabVIEW and repairing Vision (Start » Control Panel » Add or Remove Programs » National Instruments Software » LabVIEW or Vision » Repair).
Please let us know if you have any more trouble on this. Please post a screenshot of the error as well.
Regards,
Luke H

How do i create a bleed wrap cover for a book?

I have a book I created in adobe framemaker 8.0, it is a 250 page manual, 7.5 x 9. I am now due to send it to the commercial printer and they want me to send a cover for a 'Perfect Bound' type binding.
Should I be using FM to do the cover or am I better off with a different adobe program?
If I use FM, do you have any advice in regard to book covers of this type?
Should the cover width be double the page width (18in) so that it can wrap around?
Any help you may provide is greatly appreciated.
Thanx,
William

William,
Along with what Arnis said, I'll add that you may be able to submit a PDF to a printer that is the same page size as the body pages, with separate pages for the front and back. A printshop should be able to impose the cover for you and in doing so, automatically account for the thickness of the book. I believe it is standard for a printshop to have this kind of software.
In general, I agree that FM is an adequate choice for this project, as long as it has sufficient typography and graphics controls that match your requirements. Most likely it does, but if you need highly-advanced layout tools, you might have to consider InDesign.
Russ

How do I make a DVD cover for a standard DVD holder (190 x 135 x 14mm) in Photoshop Elements 12?

How do I make a DVD cover for a standard DVD holder (190 x 135 x 14mm)? I would like for it to be easy so I can fold the finished product and the front cover, spine, and back cover will all be in the correct space when inserted into the DVD holder. I know there is a "create DVD cover" option in Photoshop Elements 12, and I've tried that, however the dimensions never come out correctly. Can anyone help? Thank you!

Get a template from Avery. These work well in WORD.
Enhance the graphic in PSE, then import it into WORD.
Free Avery® Template for Microsoft Word, DVD Case Insert 8891

Cant install NI-IMAQ for USB Cameras

i tried to install NI-IMAQ for USB Cameras.but it cant get it to install its giving the error need higher version than 7.0 but i am using 8.0 .also it is saying that it needs vision 7.0 ........??wat are these error ..how can i get it install ????????help
thx
Regards

nolsqn,
Can you clarify what you have installed? You must have all of the following installed to get NI IMAQ for USB Cameras to install:
System Requirements:
- Windows 2000/XP (English,
Italian, Japanese, French, Italian, Norwegian, Dutch,
Spanish/Portuguese, Russian, and simple Chinese)
- LabVIEW 7.0 or higher with NI Vision 7.1 or higher for the USB LabVIEW support
- Vision Assistant 7.1 or higher for the USB Vision Assistant plugin module
- Vision Assistant 8.0 or higher for the USB Express VI
It sounds like you are missing Vision Development Module (this is what is referred to as NI Vision)? Is this true?
--Michelle
Instrument Control R&D
National Instruments
Instrument Control
Machine Vision

Download NI-IMAQ for usb cameras

where can i get the NI-IMAQ for USB cameras???
i woul like to download this application for my registered product

Can be taken from External link .
I copied this link from this thread:
http://forums.ni.com/ni/board/message?board.id=170&message.id=154541&requireLogin=False
Regards, Guenter

Problem with NI-IMAQ for usb

hi. i have labview 8.0 and vision 7.1. i installed ni-imaq for usb but the vi blocks didn't appear in function palet. does ni-imaq work with labview 8.0 and is it important to have the same labview and vision? if there is a new version of ni-imaq to work with labview 8.0 please send me the link.

Ali,
As far as compatibility, LabVIEW 8.0 is compatible with Vision 8.0, 8.2, and 8.2.1 -- it is not compatible with Vision 7.1 so that may be causing the issues you are seeing. LabVIEW versions are only compatible with the same, and newer versions of Vision. As far as IMAQ, here is a link to the Version Compatibilities of LabVIEW and IMAQ. Let me know if you have more questions!
-Allison S.
Calibration Services
Product Support Engineer

Want to buy a case/cover for my macbook

i have a refurbished macbook, bought in november 2009 (from the online apple store) that i want to buy a case/cover for. The problem is everywhere i look, the cases are designed for the aluminum or macbook pro, and one seller on ebay that has the same cases available from the apple store, states that it doesn't fit the black or white versions, only aluminum and pro. Does anyone know who/where might make/sell cases for this version? Seems odd that even the apple site doesn't have them.
thanks in advance for any help!

Hello bzclown,
And welcome to Apple Discussions!
A search for 13.3" Macbook case brought up these results on Amazon's website.
http://www.amazon.com/s/ref=nbsbnoss?url=search-alias%3Daps&field-keywords=macbook13.3case
B-rock

Cover for usb

Similar Messages

Maybe you are looking for