Cover that will work on touch while using tomtom car kit

Hi,
JUst got a Tomtom car kit, and trying to find if there is a cover that will fit the touch while its in the tomtom dock, as don't really want to have to keep taking my cover of every time I want to use the tomtom.
thanks
Mark

Hi illaass,
I tried the suggestions and they do work for Tom Tom car kit.
I had to close the car kit application and restart it until it showed as docked but then worked fine in navfree.
I also disabled wifi on the iPod touch so that it had to use gps
I have now purchased uk Ireland tomtom application.
The palm Bluetooth GPS does not appear in the devices list still though.
Are there any applications that can be bought to support this as car kit is not any good when on foot?
I do have a USB power pack but that means carrying power pack and car kit with iPod docked in it.

Similar Messages

I am looking for a task app that will work with MS Exchange using SecurID. Any suggestions?, i am looking for a task app that will work with MS Exchange using SecurID. Any suggestions?

My company uses MS Exchange with RSA SecurID. I also have an iphone 5 and i would like a good task app to manage my tasks on the go. The problem is all the task apps ive tried wont work with the SecurID. Any suggestions on a good app which will work with SecurID? thanks

Only two devices on our plan, so not so much an issue. And I have found myself using it much more than I thought I would when we got them (also first smart phones for both of us). Even got my wife to use hers for checking email while we were out of the country (big step forward for her ). I'm very interested in the ApplePay, but will want to wait a bit before diving into it. And since both phones are still in great working order, will likely wait a bit for the upgrade (sometime next year?). Will depend, I suppose, on the kinds of deals we see and what the plans turn out to be for updating my iPad and getting here one.

The app store on my brand new ipod touch offers me majority apps that cannot be used on my software. how do i find apps that will work with 6.1.5? this is frustrating, especially when purchased brand new.

the app store on my brand new ipod touch offers me majority apps that cannot be used on my software. how do i find apps that will work with 6.1.5? this is frustrating, especially when purchased brand new for christmas.

See the following to purchase earlier, compatible version for iOS 6
App Store: Downloading Older Versions of Apps on iOS - Apple Club

I need a USB cord for a 3rd generation, original model, iPod Touch. The cord for my IPhone 3SG wont work. Can I buy a USB cord that will work?

I have a 3rd generation, original model iPod Touch. My USB conneror cable cord is worn out. I cannot use the newer cord that works with my iPhone 3SG. Can I get a version of the cord that will work with the oroginal version of an iTouch, 3rd generation iPod Touch?
Thanks for any input.

There is no difference in the cable for the iPod touch and iPhones.
- Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, cracked or broken plastic.
- Make an appointment at the Genus Bar of an Apple store.
Apple Retail Store - Genius Bar
For info, what iPod do you have? You said"I have a 3rd generation, original model iPod Touch"
The original iPod touch is the 1G iPod touch.

I am trying to use an education program that needs Java applets to install and use and it will not use Safari. When I download IE from the web it will not install. How can I get a browser that will work on my MacAir for travel use of this program?

I am trying to use and education program that needs Java applets and it will not run on Safari. IE will not install from the web. How do I get a browser that will work to install so I can use this program when I travel.

Try using FireFox. IE will only run on a Mac if you run Windows on the Mac.
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows 7 or Windows 8. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusion and Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. A more recent comparison of Parallels, VM Fusion, and Virtual Box is found at Virtualization Benchmarks- Parallels 10 vs. Fusion 7 vs. VirtualBox. Boot Camp is only available with Leopard and later. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

I have created my site with Muse and have uploaded to an external ftp hosting, now my secure log in will not work because I am not using BC. Is there a way to create a secure log in that will work with out being forced to use BC?

I have created my site with Muse and have uploaded to an external ftp hosting, now my secure log in will not work because I am not using BC. Is there a way to create a secure log in that will work with out being forced to use BC?

Hi
Secure Zone login feature will only work if you host your website with Business catalyst.
Please take a look to this as an alternative
Password Protect Pages Widget for Adobe Muse
Also, check this thread,
Re: Can I create a login/password protection in Muse for a HTML5 page or two?

I have an ipod touch 2nd generation, i'm trying to get apps that will work and i cant find any. Its says i need an update because it has ios 3.1.3 , but on itunes it says there is no update ? what apps can i get??

i have an ipod touch 2nd generation, i'm trying to get apps that will work and i cant find any. Its says i need an update because it has ios 3.1.3 , but on itunes it says there is no update ? what apps can i get??

Sounds like you actually have a 1st generation as those cannot update beyond iOS 3.1.3.
Model Identifier Utility
rachelfromnorthumberland wrote:
what apps can i get??
Finding iOS Apps Compatible with Older Devices

I need to use an hp 6215 printer with my mac book pro. the driver installation disk doesn't work. where can i get a driver that will work? i use OS X

i need to use an hp 6215 printer with my mac book pro. the driver installation disk doesn't work. where can i get a driver that will work?

With the Lion it is essentially unnecessary to resort to external driver disks. What's more, most of those disks are incompatible with the OS and should not be used. The system already carries a wide variety of printer description files (aka PPDs, which is what modern printing systems use as "drivers") for a lot of brands. And there was an HP printer update just two days ago.
Just checked in mine and did indeed find that the HP OfficeJet 6200 Series, with or without Fax, is covered with the latest update.
So just go thru the motions of creating a proper printer instance:
Make sure the Mac "sees" the printer on the network.
System Preferences / Print & Scan
Click on the + button on the left column
Select the appropriate type of printer, will use IP for the rest of this
Select HP Jetdirect - Socket, default for HP network printers
Type the IP address or look it up
Name the printer for easy identification on the print dialog
Let the Mac identify the printer model or manually choose the driver
Click Add.
Once the instance pops up in the list, can click on Options & Supplies for further config.

My PowerBook G4 says that it's connected to wifi, but it still no internet connection. The connection will work for a while, and then I'll have to run diagnostics and it will work again for a few minutes and then stop working again. What's going on??

My PowerBook G4 says that it's connected to wifi, but it still no internet connection. The connection will work for a while, and then I'll have to run diagnostics and it will work again for a few minutes and then stop working again. What's going on??

Basic troubleshooting techniques for any problem
Restart the computer = joy?
Reset the router = joy?
Restart the computer in Safe Mode = joy?
ask yourself "What changed immediately preceding the onset of the problem?" = Anything... hardware, software, cabling, environment (interference source)
ÇÇÇ

In the garage I have a Netgear Router. it is connected by a ethernet cable, I have a 1tb drive that I want to use there. On the drive there is only a USB port. on the Netgear there is only ethernet ports. is there an adapter that will work for that?

In the garage I have a Netgear Router. it is connected by a ethernet cable, I have a 1tb drive that I want to use there. On the drive there is only a USB port. on the Netgear there is only ethernet ports. is there an adapter that will work for that?

It's not that simple. You need a "smart" device to connect a hard drive to, like a Time Capsule, or another computer, or an Airport Extreme/Express that was made to share a drive, or some other brand router that has a USB port for sharing a drive, etc.

I only use Windows XP, is there a version of Lightroom that will work with XP

I only use Windows XP, is there a version of Lightroom that will work with XP

Yes if you want to run Version 1....you can still download version 1.4.1 (the last update to Version 1), and your serial number would be good for that.
But if you want to run Version 2 or Version 3 you'll need to buy a new license (i.e. a new serial number), but if you have a valid serial number from any prior version you only have to pay for the upgrade license for the later version, not the full license.

I have used Photshop 3.0 for many years... What is the current, simpliest Replacement, that will work on Windows 7?

I have used Photshop 3.0 for many years... What is the current, simplest Replacement, that will work on Windows 7?

The currently-offered options you have from Adobe are full Photoshop for $10/month (in conjunction with Lightroom) or PS CS6 for $700/$1000, or Photoshop Elements for $100 or less. Elements is the “Consumer” version of Photoshop.
You can download a 30-day trial for PSE12 from Adobe by clicking the Try link next to the PSE12 icon near the bottom right:
http://www.adobe.com/downloads.html
There are other photo editors that will do similar things, but since Elements is from Adobe it may be a little more familiar. Without knowing exactly what operations you did with your photos, before, no one can answer your question about how similar a newer program might be to your older PS3:
http://www.paintshoppro.com/en/products/paintshop-pro/ultimate/default.html

I have an old MAC using OS 10.5 (does not have Intel processor). I need a new printer, but i cannot find one that will work with such an old operating system. Is there a new printer that will work with this old system?

I have an old IMAC using 10.5, and it cannot use any newer operating system. I need a new printer, but I cannot find one that is compatible with this old system.
Is there a new printer out there that will work with 10.5?
Thanks,
Niles Stroh

Canon Pixma iP4950 works great with my PPC G5 iMac on Leopard. Maybe other of their models do as well.

I need to install an App that will work with my iOS. How do I get an earlier App that is not now in the App Store?

I have an iPod Touch that can only run iOS 3.1.3. I have had Zinio & PressReader (both free Apps) installed on it for many years, and subscribe to a number of Magazines and Newspapers. I had backed up the iPod in September 2012. Today, I had to restore the iOS from the backup, but saw that Zinio and PressReader had not been installed. I am aware that the iTunes store explains that the latest versions are for iOS 4.3, but I need the latest version that will work with my iPod on iOS 3.1.3.
Does anyone know how I can get hold of the earlier versions of the "ipa" files, short of asking the publishers themselves?
And, should I expect the Publishers to release the appropriate ipa to me?

You aren't being left in any lurch. Your hardware is obsolete, and the software world has moved on. If you have a qualm about the matter then discuss it with the software's developers. Apple is not responsible for software they do not develop. This is technology, and you will just need to get used to it.

Can anyone recommend a USB CF card reader that will work in my Macbook Pro Retina? My USB card readers for CF cards do not work

At present, the only way I can load photos from a CF card to my new Macbook Pro Retina is by loading them onto an external hard drive via an old PC that can accept either of my USB card readers, then plugging the external hard drive into my MBP. Neither the USB card reader or the cable that comes with the Canon HDSLR camera will transfer photos directly to my MBP. I find it unbelievable that I have to go to a PC to load photos because I can't do it with my new MBP.
Has anyone found a reliable USB CF card reader, or one that connects via thunderbolt or HDMI, at any price, that will work directly with the new MBP Retina?

This is what we need:
Location photoshoot - we use the Canon EOS 5D Mk II still camera & the Canon FX100 pro camcorder.
CF cards are: SanDisk Extreme UDMA & SanDisk Extreme Pro UDMA 6 for video (I think they are both Type II) My Mac recognises them both as FAT 32 format
My MBPRetina is on the latest version of Mountain Lion OSX 10.83
the files from the camcorder will transfer to my MacBook Pro Retina directly via the camera's cable but it is quite slow & it means I cannot continue to film while downloading files but this we can live with.
the files from the still camera Canon EOS 5D Mk II will not transfer directly via the camera's cable - have yet to get the Canon software to download, but via the camera's cable will not help anyway as we need to have the still camera free to keep shooting.
We need to be able to take out the CF card from the first part of the shoot & download the still shots while just on the Macbook's battery power, while we insert a fresh CF card back into the still camera to continue with the next part of the shoot simultaneously (while the first card is downloading.)
The files from the first part of the shoot will be both in RAW (.CR2) & Jpeg format. We just need to quickly transfer the jpegs, then I do a quick sort, batch the best ones as black/white images, & use these in a client slideshow immediately after part 2 of the shoot.
Obviously we need fast data transfer speeds, & rely on the MBP's battery power while on a location shoot.
The card readers I have tried are an older specific CF card reader branded as Palm, & a USB 2 multi card reader branded as Travel Flash. With both readers, the lights on the readers flash on & off, & the MBP recognises the card & the files will even appear both in Finder & in i-Photo, so it starts importing, then aborts with an error message saying:
'The Finder can’t complete the operation because some data in “” can’t be read or written.
(Error code -36)'
& another message saying:
'the disk was not ejected properly'.
So it appears the MBP does read the CF cards but the card readers don't stay connected, no matter what angle I put them on or however many times I re-connect them.
Yes, they are probably cheap & I want to buy a decent one.
So, in summary:
the card reader needs to work when the MBPR is only on battery power (I read in some forums that some USB card readers aren't so reliable on the laptop's battery power)
the card reader needs to be quite fast. I have read the USB 3 readers won't read CF cards at higher than USB 2 speeds. Is this true? Are the firewire connected ones faster, & if so, are they still reliable on the MBP's battery power?
From research, it appears my problem is associated with my specific model of Mac & platform, being MacBook Retina on Mountain Lion OSX Version 10.83. If any of the recommended card readers have been successful with this, plese let me know.
Thanks heaps for the suggestions so far.

Cover that will work on touch while using tomtom car kit

Similar Messages

Maybe you are looking for