Coversion of purchase requisition to purchase order.

Hi All,
When i make a PO with reference to a requisition, the Payment term code of the vendor does not get copied in the PO. However the description of the payment terms gets copied correctly.
If a make the PO without reference to requisition, the payment terms code gets copied correctly.
Please advise where to check in the configuration.
SAPXPT

Hi,
As far as my experience goes, you will not see the payment terms description besides the payment terms code.
As you explained, you will see only the time buckets (no of days) defined for the payment terms.
That is the way std. SAP works.
Regards
Prabhu

Similar Messages

Purchase Order and Purchase Requisition

Hi To All,
my customer while using tcode me2m hase extracted purchase order opened since 2007. now he want to close all this order and settle them to zero. this operation should be done also for the purchase requisition.
there is a standard way to do this? if not any idea?
thanks
C.

Hello
Just by doing
In the PO line item level details, activate DELIVERY COMPLETED check box.
system will not close po from GR
U will have to check what is the gr qty did till date
and update the po with the same qty manually
eq
if po qty is 50 and total gr done till date is 40
change the PO qty to 40 and save
this is the way u can shot close the po
Which effects has the "delivery completed" indicator?
The purchase order item is considered closed, even though the total quantity may not have been delivered.
Although a further delivery is not expected, it is still possible.
At the time of the next goods receipt, the system suggests the item as unselected.
The purchase order item can be deleted, even if the total quantity was not delivered.
Although the "delivery completed" indicator is not set, a purchase order item is still considered closed if the full quantity has been delivered. In this case, the "delivery completed indicator" is not required.
The system allows to make further goods receipts. Why?
Answer
See note 16239 and 856279
hope this helps
Edited by: Umakant Bhangale on Oct 11, 2010 5:20 PM

Purchase order and purchasing requisition .

Hi
What is the difference between Purchase order and Purchase requisition . ?
And why cube are different for them ?
Regards

A purchase requisition is an internal document that's created to initiate a procurement transaction. The requisition is created to identify the materials that are needed to be acquired and when they're needed. Once completed by the initiator, it's sent to the appropriate approvers.
Upon approvals of the requsition have been provided, and a vendor is selected, a purchase order is created. The purchase order is an external document whereby an agreement is made to procure the materials at an agreed upon price and delivery schedule
The InfoCubes for each of these is different due to the nature of the documents (internal v. external).

Report for purchase requisition, purchase order and schedulling agreement.

Hi, thanks for your help.
I need a report or query just to view in one screen the related docs. as purchase requisition, purchase order and schedulling agreement.
I don´t know if there is a table or trx. with that information.
Is it possible to get that information via query ?
Thanks for your help.
Regards.

For PR and PO you can use ME5A
For PR and Scheduling agreements also you can use ME5A.

Purchase Requisitions, Purchase Orders and Receipts

Hello all,
The following is the sequence for Purchasing
Purchase Requision -> Purchase Orders -> Receipts
However I have a requirement to bring in the related Purchase requisions,purchase orders and receipts from 11i into R12 instance.I can do that using the open interfaces.However How do i link these 3 objects together?
I intend to import the purchase orders first and then import its related purchase requistions and the receipts...In doing so how do i link them together.How do i know that this purchase order was created from this Purchase requistion or this receipt is meant for this purchase order? What is the joiing columns in the base/open interface tables?
Thanks
AJM

Hi Venkat
1. To perform ATP do we need all the issues(Sales Orders, Deliveries) and receipts(Purchase Requisitions, Planned Orders) in APO?
Yes you need all the mentioned elements above in APO to do ATP check. Again, you can also extend the scope of the check to further more receipts and issues. All depends on your configuration of scope of check.
3. I guess in Apo the planned order and process order is a single elment. Is that Correct?
Yes, technically a planned order can be a planned process order or a planned production order.
regards
Mohan Chunchu

Purchase orders and requisitions - R12 user interfaces

Hi,
I see that the purchase order can be registered in the system by two different interfaces (I'm running R12.1.1): Using Oracle forms (Navigation path: Purchasing Super user: -> Purchase orders -> Purchase orders) and using Java html pages (Navigation path: Purchasing Super user: ->Buyer workspace ->Orders).
I have two questions:
1. The second option (using java pages) is not documented in the usersguide. Is it fully in production or they are still developing it? Why there are two different interfaces for the same purpose?
2. I see that from Java pages interface I can only see requisitions, but I cannot enter new ones (Navigation path: Purchasing Super user: ->Buyer workspace ->Requisitions). Should I enable somewhere this or the requisition is not developed using Java pages interface?
Thank you

993322 wrote:
Hi,
I see that the purchase order can be registered in the system by two different interfaces (I'm running R12.1.1): Using Oracle forms (Navigation path: Purchasing Super user: -> Purchase orders -> Purchase orders) and using Java html pages (Navigation path: Purchasing Super user: ->Buyer workspace ->Orders).
I have two questions:
1. The second option (using java pages) is not documented in the usersguide. Is it fully in production or they are still developing it? Why there are two different interfaces for the same purpose?
2. I see that from Java pages interface I can only see requisitions, but I cannot enter new ones (Navigation path: Purchasing Super user: ->Buyer workspace ->Requisitions). Should I enable somewhere this or the requisition is not developed using Java pages interface?
Thank you
http://docs.oracle.com/cd/E18727_01/doc.121/e13410/T446883T443956.htm
http://www.apps2fusion.com/training_demo/puneetk/Professional-Buyer-Work-Center.pdf
HTH
Mahendra

Report with purchase requisitions and purchase orders: how?

Hi,
I need to get a list of items bought with their purchase requisitions and purchase orders (when they exist). This can be done looking at each purchase order (ME23N), ou purchase requisition (ME53N), and writing it down. But in some cases, I have to do it on about 450 operations. I'd like to get this list without having to search for each requisition ou order. I can get a complete list of orders and requisitions, but without any relationship between them (they are mixed as if they were the same thing, but there´s a field telling it that row is an order or a requisition). Using some macros in excel, I can find this relationship in 40% of the cases (for example, if item 421351 was purchased only once, an order for item 421351 is related to a requisition for item 421351). Is there any way to get this list automatically? Or is there any field that tell me this relationship?
Thanks,
Francisco Morbiolo
Votorantim Cimentos
Votorantim, SP - Brazil

Sorry, I forgot to tell this: I don´t have access to SQ01/SQ02/SQ03.
I get the orders and requisition reports using ZGLPS020.
Thanks,
Francisco Morbiolo
Votorantim Cimentos
Votorantim, SP - Brazil

Availability check in Enjoy Purchase Order & Requisition

Hi Experts,
The availability check is used in 4.7E also but what is difference in Ecc 6.0 or new functionality added
Can any one plz let me know
Regards
Pratap

Below is capture from sap release documentation :
Availability Check in Enjoy Purchase Order and Requisition
(Changed)
Use
As of SAP ECC 6.0, SAP_APPL 600, display and checking of availability are invokable separately in the
Enjoy purchase order and requisition in line with the system behavior on the Sales side.
You invoke the display and checking of availability in the Enjoy purchase order (transaction code
ME21N) and the Enjoy purchase requisition (transaction code ME51N) as follows:
- To display the availability overview, choose Environment -> Availability
- To check availability, choose the Check Availability icon.
13.6.16.3 System Behavior After Availability Check for an Item (Changed)
Use
If you carry out the availability check for an item of a stock transport order, hitherto the system adopted
confirmations as per the desired date/time only.
SAP AG 30
______________________________________________________S_A_P_-S_y_s_te_m_
As of SAP ECC 6.0, SAP_APPL 600, you can define in Customizing how the system reacts if the desired
quantity cannot be confirmed for the desired date/time.
You have a choice of two settings:
- Confirmation as per desired date/time
This is the standard setting and corresponds to previous system behavior.
- Delivery proposal
- Full confirmation
Effects on Customizing
You make the settings in the Rule for Adoption of ATP Results in Purchasing field in Customizing for
Purchasing under Purchase Order -> Set Up Stock Transport Order -> Assign Delivery Type and
Checking Rule.

How to create a purchase order for a purchase requisition

Dear Experts,
Explain the steps for creating purchase order for a purchase requisition.
and where can i find this purchase requisition field in PO creation.

Hi Ravi,
Check out these documents:
http://www.olemiss.edu/projects/sap/MM_Create_PO_with_Ref_to_a_PR.pdf
http://www.sap.com/africa/services/education/pdf/Work_Instruction.pdf
Regards,
Chandra Sekhar

Tolerance limits in Purchase Requisition and Purchase Order

Hi there
I see there is some new functionality in ERP6 to control the price difference between the requisition and the order. According to the documentation one needs to set up a tolerance key and then set the tolerance limits for price price variance. Thereafter one needs to set the tolerance key on the document type. I have looked in the document type and I can't seem to find any place in the config to set up or assign the tolerance key to it. Has anyone tried this and how would I assign the tolerance key to the document type?
Thanks
Vinesh

Aroop thanks for your reply.
My scenario is not the same as in 3rd party processing. In fact my scenario is make to order and even repairs of other companies machinery. Now what we are trying to achieve is lets say in the repair or in production of the customers machinery or service, MM needs to make a purchase for a part or tool etc. That in itself has a price. Meaning our purchase mm dept has to pay the vendor for the purchase made and in return we need to charge our customer for that purchase. So we would like for the price of the purchase order come in our sales order condition type as a surcharge.
We were able to fetch the price of the production order automatically thru condition type EK02.
We would like to do the same from purchase order.

Automatic Creation of Purchase Orders from Purchase Requisition

Hi,
Requirement: When the Purchase requisitions is converted into Purchase Orders using ME59N, the document type of the PO should be ZCO (Z document type for Call off) and not NB.
Issue:When the Purchase requisitions are converted into PO's using ME59N, noremal PO's(Document type:NB) are getting created.
As per the business requirements, it should be ZCO.
Please guide if I am missing anything.
With regards
Krishna

Hi
Please refer the below thread.
OSS Note 114213
[ME59N - Automatic determination of POdocument type|ME59N - Automatic determination of POdocument type]
Gobinathan G
Edited by: Gobinathan Govindarajan on Nov 26, 2009 11:15 AM

Creation of Purchase Order Instead of Purchase Requisition

Dear Gurus,
In Extended Classic Scenario we are using SRM 5.0 and ECC 6.0. we need to create only Purchase Order rather then Purchase Requisition. this is given as the development enhancement. can anyone of you tell me the procedure to go about this requirement.
In the following step : " Go to SRM --> SRM Server --> Cross Application Settings --> Define Objects in Backend System --> go to external procurement and select the function from the drop down box", it says "purchase order if item data is complete, otherwise Purchase Requsition.
So i am not sure that this will fulfill my requirement. need some help from you guys.
Thanks in Advance,
Mohit.

Hi Mohit,
I have gone through your query. It says you are working in Extended classic scenario.
If you want to create a P.O directly after creating a shopping cart in SRM, maintain the following settings
SPRO > IMG > SRM > SRM Server > SOURCING > Define sourcing for product categories
In that maintain category I.D, Source system and Sourcing never carried out in sourcing tab.
After maintaining these settings, once you create a shopping cart and assign a vendor in the shopping cart it will directly create a P.O instead of going to sourcing **** pit.
In case if you don't assign any vendor in Shopping cart it will still create a P.O but kept in held status. The P.O gets released once you assign a vendor.
In case you require further calrification feel free to ask.
Also reward points for suitable answers.
Rgds,
Teja

ME58 : creation of purchase order only for requisition fixed

Dear.
In trx. ME58 when I create the purchase order from the purchase requisitions how can I select only the purchase requisitions fixed ?
Thanks.

there is no such selection in ME58.
use ME57 instead and make use of dynamic selection
if you tick the box for "assigned requisitions" in the middle of the selection screen, then the result is almost the same as in ME58

Creation of Purchase Order Without Requisition

Hi Experts iam new to this forum
Can u please explain with navigation that how to create a Purchase order without requisition ??

Navigate to purchasing responsibility.
use menu --> Purchase order --> Purchase order form.
This is a very detailed note on how to do that:
How to Create Purchase Orders (Doc ID 168237.1)
Regards,
Paarthy

Blocking a Requisition Line Item if A Purchase order exists

Hi All,
We are looking at a way to block a purchase requisition (not allow the end user to make changes) if a Purchase Order Exists for that purchase requisition line item. Is there a way of doing this without having to use a user exit?
We do have release strategies on requisitions so we can control the filed status there but this is not really going to solve the 'problem'
Your help will appreciated.
Kind Regards,
GA

Hi,
Thanks for your help. The end user are mostly changing the value, quantity and adding specification in the text fields. But the procurement department do not pick these changes up as the PO is already with the Vendor.
Regards,
GA

Create purchasing requisition or purchase order from service order

Hello experts,
we are facing the following problem:
We are implementing Customer Service module and out of the notification we create a service order. In the service order (components tab) the technician declares the spare parts he has to order from the vendor. We do not keep stock of the spare parts so all of them have to be ordered from the vendors.
We have managed so far to create a reservation for the stock material and a purchase requisition for the non-stock materials of the service order according to the standard sap documentation. What we need is to create a purchase requisition or a purchase order for the stock items using standard logic.
Thanks
George

Hi
Please follow the steps it will solve your scenario
Steps involved in Service PO:
1.Define Organizational Status for Service Categories, in IMG - MM - External Services Management.
2.Define Service Category, Enter Service Category, Org. Service Category, External Number Assignment
Without Validation, Acct. Category Reference & Service Category Description.
3.Define Number Ranges for Service Category.
4. Create Service Master Record (AC03), SAP Menu u2013 Logistics u2013 MM u2013 Service Master, Enter Service Category,
Base unit of measure, Mat/srv.grp (007 u2013 Service), Division, Valuation class u2013 3200 & Service type.
5.Create Service PO with Acct. Assignment u2013 Cost Center (K), Item Category u2013 D, Material Short Text, Mat. Group, Plant, Entry for Services in Item Level i.e. Service No., Quantity & Gross Price u2013 Save.
6.Maintain Service Entry Sheet u2013 ML81N in SAP Menu u2013 Logistics u2013 MM choose PO in ML81N edit and save.
7.Then do MIRO from PO reference u2013 Service Entry sheet.
8.Collective Release of Service Entry Sheet u2013 ML85
Thanks & Regards,
Mani

Coversion of purchase requisition to purchase order.

Similar Messages

Maybe you are looking for