COWBHUWE : simple question for experts

How can I have HU in HU proposal for an order ?
What are the previous step ?
I tried to create HU for my material but they don't appeared in the list.
Regards.
Christophe

Hi Christophe,
1.You have to Created Packing Instruction for a material in POP1 transaction
2.The in the Material master Basic data you have to assign the Packing Material group for both the header material and the packing material. Both to be in same packing material group.
3.The use tcode COWBPACK for creating the packing with Handling units
4.Then use tocode COWBHUWE to make the receipt.
Thanks and regards
Murugesan

Similar Messages

Can anyone answer a very simple question for me ive heard the apple was giving a free iphone 4 or 4s bumper away is there any truth to that?

can anyone answer a very simple question for me ive heard the apple was giving away iphone 4 or 4s bumpers is there any truth to that?

Not any more, no. There was a free bumper program back when the iPhone 4 originally came out. It has long since expired.

SOME SIMPLE QUESTIONS FOR ALL OF YOU

hi,
I have some questions for all of you.
1. Oracle uses cgi (even asp!!! I've seen an asp page somewhere on an Oracle's site but this moment I don't remember where perhaps it is asp->cgi). Why ?
Oracle doesn't support their techologies
(Pl/SQL, Jsevlets,XML) ?
2. Oracle says that has just released a
new product for mobiles called "Portal2Go".
I tried to install this product on NT with OAS 4.8.1.
I had many problems during the installation and after many tries finally I did it(thanks God). but the problems continue...
many Jsp errors (from the "tested" supplied apps). My question is:
a. This product is in an early stage (many installation errors.. just a baby) and I think is stable for Sun Solaris but not on NT.
b. You Oracle "experts" (i.e. oracle staff, NOT YOU guys) tell me ONE advantage to use you product (I'm an oracle developer for 6 years now):
You say that I can PORT my existing app in any device and Web (through XML). This is a joke. Mobiles,PalmPCs,Web etc. have different requirements (content,display etc).The scope is different.. so this is absolutely FALSE (to use a boolean).
This release is user unfrienlty. Why.. tell me WHY to pay for a product and for extra hardware (read the product technical reqs!!) to do the SAME THINK
I do NOW with existing sources.
I've developed an app for my company's employees using existing version of DB (8.0.5),pure pl/sql and a WAP GATEWAY.NOTHING LESS NOTHING MORE.
please answer. Any comment welcomed...
maybe I'm wrong maybe I'm not.
PS.WHERE THE WAP GATEWAY/SERVER IS. I searced the cd and..nothing :-) ?
thanks
thanasis j.a.
B.A. in Informatics
M.Sc. in IS

Portal-to-Go is a wireless portal server, the first version was released November 1999.
The problems you describe that mobiles, Palm devices, etc all have different characteristics is one of the key reasons for Portal-to-Go. It allows any service to be displayed on any device by generating content in an appropriate format for specific devices. This way you can take into consideration the size of the screen, the display characteristics, etc.
It is 'stable' on Solaris and NT, though it is true that the installation procedure of the CD is for Solaris only. The product is not currently available on OTN, so the installer restrictions should have been explained to you when you obtained the CD.
Why Portal-to-Go? Here's three reasons:
1. Inherent problems of the User Interface for a wireless device, so we provide a way personalise the UI to improve navigation and allow commonly used parameters to be saved as stored preferences through the portal.
2. Differences in the characteristics between wireless devices make it hard to support all type without re-creating content and applications for each specific case. With Portal-to-Go, the same service can be accessed from any device.
3. Lack of content available for WAP and other wireless devices. We have tools to quickly create wireless services from existing Web sites as well as an application platform for creating new Java or database applications for wireless devices.
You are correct that the product does not have a WAP gateway.
I'm not sure where you are located, but feel free to contact me offline. I can answer any specific questions, or get you contact with a local Oracle representative.
At the moment, if anyone wants to obtain a copy of Portal-to-Go, you should contact your local Oracle representatives.
Paul

Activity monitor question for experts.

When I open activity monitor it is constantly changing. I have safari open, but it is there and then it isn't and then it is in activity monitor. How do I read this and is that normal?

mike sanders3 wrote:
I entered the thread because it clearly said Activity Monitor for experts and I had an AM problem please tell me where I went wrong I thought we were here to help each other not be picky about threads. If your thread was something different then maybe it should have been more specific I just needed help and there was an opening that seemed to refer to my problem. I don't spend half my life here as you seem to do judging by your posts, let's just be nice to people who need help.
In order to help people, they should understand the purpose of these boards.
Had you read the OP's post, you would see that his Activity Monitor is working and his question was simply why Safari appears and disappears from the AM window.
Your issue is entirely different and that is why I suggested starting a new thread with your particular problem/issue which has nothing to do with Safari in the Activity Monitor.
Perhaps the term "hijacking a thread" seems rash to you, but it is a common expression with no personal attachment to it. It merely means that someone has used another poster's thread to pose a completely different topic.
To best get help on this or any technical board, first search for instances of your particular issue, which may have already been solved, and if you do not find such a topic, start a new thread with the Subject describing your issue.
Once people start responding to other posts in a thread, nobody any longer knows who is answering whom.
It is always preferable to start a new topic if you want a quick solution to a problem, rather than bury it in another person's thread. It's called "Netiquette" and it is not my invention. It's been around as long as the net has been around AFAIK.
Message was edited by: nerowolfe

Pro Tools convert to Logic Newbie some simple question for logic users

Hey guys, I am a recent convert from Pro Tools! and There were just some simple questions I thought some of you may be able to help me out with. I am using Logic 9.1.1
1) After I set up a multi timbral software instrument (in this case MOTU Symphonic Library) how do I set up midi channels to trigger the individual sounds in the instrument. (in pro tools I used to create a midi track then send an output of that track to that particular soft synth)
2) How do I set up a and forgive my Pro Tools vocab but basically I want to set up a reverb channel on an aux track have it receive on a bus so I can send other tracks to that particular bus.
Thanks for the insight and really looking forward to finally make use of all this ram! lol

1) I have a nord stage and would like record via midi. In pro tools i would usually need to create a midi track with the output set the the nord and an audo aux track to hear it What would I do in order to record midi from my nord stage?
To record, just select a non-audio track, hit record and play the keyboard. The notes will get recorded into a region.
If you want to play it back to the Nord Stage as well, then it makes sense to set the Nord up as a MIDI device in your templates, so you can just add the Nord to a track and not worry about what MIDI ports it's on etc. Open the environment, create a New -> Instrument, called it "Nord Stage", set the MIDI port and MIDI channels it's on, and sav your template.
Now, when you start a song, to sequence the Nord, you just assign the Nord instrument to a track (by for instance, right clicking on a track and choosing your Nord instrument from the list of environment obects that appears).
2) The multi instrument trick is quick and easy its great but How would I do that manually?
Lots of ways, look into your key commands, ther are all kinds of "Create track with same instrument", "Create track with next MIDI channel" and so on. There are too many ways to do this to quickly talk about here. In short, all tracks have an environment object assigned to them, whether it's an audio object, or a MIDI instrument object, and this determines where the data on the track goes.
3) How do you set up midi so that it doen'ts overwrite notes when recording over them?
Not sure I understand you here...

Very simple questions for an expert

Hi, just trying to embed an external swf into main fla. Please give me a starting point. Do I create an empty MC? Is there a standard code to upload in AS? If so what would I code and where in AS would I insert?

in as3, you use the loader class to load an external swf into another swf:
var ldr:Loader=new Loader();
ldr.load(new URLRequest("yourexternalswf.swf"));
addChild(ldr);

Question for experts: SVG vs GIF

Hello everyone
Lets say I have a website that is populated with multiple simple and complex, plain white icons. These icons will be resized in muse where needed, sometimes they will be with reduced opacity. The website is heavy on parallax scrolling and fading (opacity), and most – if not all – of the icons will be using one or both scrolling effects.
Exporting them from illustrator the GIFs are sometimes smaller in size than the SVGs.
The target audience is expected to have decent and updated computers e.g. IE 8 and below not relevant. let us suppose all users have Browsers capable of handling SVGs, and parallax.
What is better or easier for the browser? SVGs of GIFs? even if the size of the GIFs is smaller?
is rendering somewhat complex SVGs (many anchor points) "harder" than GIFs?
Any reason to not prefer SVGs except for backwards compatibility with older browsers/machines?
What would be best practice here?
Any advice/discussion/opinion greatly appreciated.
Jorge Vallejo

First, GIF should be avoided in favour of PNG: a well optimized PNG is always smaller in file size and also offers more quality options (for example more than 256 colours that GIF allows for). The trouble is that Adobe products cannot achieve this without jumping through a LOT of hoops. More about that below.
Here is a bitmap - SVG performance comparison:
1) SVG files must be drawn & rendered in the browser. That means the xml data must be read, interpreted, and displayed - which is far slower than a bitmap. A png still has to be decompressed, which does not take up a lot of processing power. Rendering a SVG is far slower (incomparably slower depending on the complexity).
2) bitmaps are generally hardware accelerated (via the GPU), a number of svg operations are not. For example, I believe css transforms for SVG is not hardware accelerated, and thus very slow to animate through that method.
3) somewhat older browsers have trouble rendering many individual SVG objects. For example, only in March 2014 was this issue resolved in Firefox.
4) svg performance is highly dependent on the specific browser as well. Take this test:
http://jsperf.com/d3-svg-opacity
It runs fastest on Opera and IE 11 on my system! Firefox is dreadfully slow.
5) SVG rendering is far slower on mobile platforms. Unless very simple ones, convert to png files.
Now, as to your files: an SVG sized at 500kb is a LOT - and then you mention you will have more SVG files ranging from less then 100kb up to more than 200kb. My question would be what type of graphics these will be in your page: background graphics, icons, ...?
Besides, SVG images produced by Illustrator can (should) be optimized. A good tool for that is SVGO: svg/svgo · GitHub a visual version can be downloaded at svg/svgo-gui · GitHub
Some must-read articles:
http://css-tricks.com/using-svg/
http://jaydenseric.com/blog/how-to-optimize-svg
http://kylefoster.me/svg-slides/#/
If you are doing a lot of animation, and there are a lot of other things going on in a page, then PNG is the way to go. SVG is best for simpler logo graphics and icons. Game developers using Flash also always convert all their vector files to bitmaps for much improved performance in Flash!
Now to my second point: Adobe's Save for Web function is abysmal for png optimization. Yes, there are techniques in Photoshop to improve the optimization of PNG images, but it takes a lot of effort:
http://www.smashingmagazine.com/2009/07/15/clever-png-optimization-techniques/
PNG Optimization Guide: More Clever Techniques - Smashing Magazine
And even after all this work, you still cannot export a PNG with a limited colour palette with full transparency in either Photoshop or Illustrator. This is important for file sizes: especially Muse websites tend to be so bloated that they take a long time to load up - and there is really no reason for this if you optimize your graphics properly.
To optimize any PNG file, use Colour Quantizer:
Color quantizer
I cannot live without this little (freeware) tool anymore - it is worth booting your mac in Windows mode just to use CQ to optimize your png files. It automatically takes care of optimizing your png files, reducing them to the absolute minimum - compared to Photoshop's standard Save for Web disaster, file sizes are at least 50% smaller in file size or more. And it includes a very simple to use quality mask brush that allows you to control/fix areas which may be troublesome when reducing the number of colours.
Having said that, it really depends on the type of graphics you are intending to place in your layout. Could you post some examples?

REMOTE DESKTOP CONNECTION (Questions For Experts)

Q1) Is it possible to connect remotely to a computer even if the user is in one country and computer is in another (without internet? If Yes Please tell HOW.
Q2) Is it possible to use hardware like printer while in remote connection with a tab or lets say I am connected with a tablet which has a USB port so if I connect a USB in my TAB will it work for the remote
desktop? (usb connected to the tab but should work as if its connected to remote computer -any possibility) If Yes Please Tell how to implement.
Q3) For ex. If I am connected to a remote computer and since my computer is not good for gaming and I want to use the remote computer to play games while the DVD is in my physical computer.....Is there any possibility
FINAL QUESTION : Can I connect to windows with an android or IOS devices without internet (PLEASE TELL HOW IF POSSIBLE) and I want to use my local Internet is the remote computer.
Friends whosoever has any knowledge regarding any question please answer me, help required. I will be really thankful to you .

A1- its possible to establish a remote desktop connection even if the user and remote computer in differerent countries but NOT possible without internet coonection... as you will have to use public ip of remote computer.
A2- To redirect devices and resources
Open Remote Desktop Connection by clicking the Start button , In the search box, type Remote
Desktop Connection, and then, in the list of results, click Remote Desktop Connection.
Click Options, and then click the Local
Resources tab.
Under Local devices and resources, select the devices or resources you want to redirect.
To see additional devices, or to redirect Plug and Play devices or drives and devices that you plug in later, click More.
To redirect supported Plug and Play devices, under Local devices and resources, double-click Other
supported Plug and Play (PnP) devices.
The Plug and Play devices that support redirection and are currently plugged in appear in this list.
To redirect supported USB devices, under Local devices and resources, double-click Other
supported RemoteFX USB devices. The USB devices that support redirection and are currently plugged in appear in this list.
Select the check box next to each device that you want to redirect.
To automatically redirect drives or devices that you plug in or connect to in the future, under Local devices and
resources, double-click Drives, and then click Drives
that I plug in later.
– or –
Double-click Other supported Plug and Play (PnP) devices, and then click Devices
that I plug in later.
A3 - not possible to mountDVD drive on remote desktop.
Yes you can establish remote desktop connection from android... there is an app called, Microsoft Remote desktop app, its very good , ı use it myself too...

Question For Experts

What is the G and E means in the motherboard name ?
like B75A-G43
B75A-E33

Thanks for that link Mr. B, I've seen it before but couldn't figure out where to find it yesterday.
Unusual for 3 people to post similar question but in 3 different sections of the forum. Here's the 3rd one:
https://forum-en.msi.com/index.php?topic=172485.msg1256491#msg1256491
I think a mod should bundle them together in a single topic.

Another very very difficult question for EXPERTS

Hello again to all my friends at Macromedia. A big hello to
Mr
DownWithTheBugs, Mr Chris In Madison, Mr Car Crash (he he)
and especially
Mrs Nancy *Adobe Community Expert. You are all my special
friends. I have
good good sleep and wake up today and solve my mystery
straight away. The
answer was:
select * from thebigtable
where ID LIKE '39%'
Although I am glad of all your futile attempts to help me and
I very pleased
at the time you spendwith me, my expertise showed me the path
in the end.
You all need to do some homework to reach this standard.
Perhaps you are not
used to databases of this size and were all a little
perplexed. I
understand!! This sintax is quite complicated to the
untrained eye but
thankyou all anyway.
My new question is this:
How do I put my beautiful new webpage on the Internet?? I
would like it to
appear inside the Microsoft website as it will benefit all
Microsoft users.
How do I put it there?? Very tough!!
Thankyou.
My moto - If your best is not good enough then try even
better, or go and
drink lots and lots of alcohol. If that does not work then do
both together
XX.

>I have good good sleep and wake up today and solve my
mystery straight
>away.
I always knew that an expert like you would solve the problem
without much
hassle.Well done!
> How do I put my beautiful new webpage on the Internet??
I would like it to
> appear inside the Microsoft website as it will benefit
all Microsoft
> users. How do I put it there?? Very tough!!
Not much, print it using you printer (it's should be not far
from your
computer: Have a look around and if you find something with
paper inside,
that's the printer). Put the papers in a folder and send them
to Someone at
MS (You don't need to put a name: Usually it's Mr. Gates the
one who uploads
the pages himself, but I'm sure there are lots of MS experts
that will be
glad to help with the job).
Just a reminder: if your pages need to be uploaded as soon as
possible,
don't forget to put some extra Air Mail stamps on the
envelope!
Best of luck trying to find the printer!!
Andres.
"THE WEBDEV KING" <[email protected]> escribi�
en el mensaje
news:[email protected]...
> Hello again to all my friends at Macromedia. A big hello
to Mr
> DownWithTheBugs, Mr Chris In Madison, Mr Car Crash (he
he) and especially
> Mrs Nancy *Adobe Community Expert. You are all my
special friends. I have
> good good sleep and wake up today and solve my mystery
straight away. The
> answer was:
>
> select * from thebigtable
> where ID LIKE '39%'
>
> Although I am glad of all your futile attempts to help
me and I very
> pleased at the time you spendwith me, my expertise
showed me the path in
> the end. You all need to do some homework to reach this
standard. Perhaps
> you are not used to databases of this size and were all
a little
> perplexed. I understand!! This sintax is quite
complicated to the
> untrained eye but thankyou all anyway.
>
> My new question is this:
>
> How do I put my beautiful new webpage on the Internet??
I would like it to
> appear inside the Microsoft website as it will benefit
all Microsoft
> users. How do I put it there?? Very tough!!
>
> Thankyou.
>
> My moto - If your best is not good enough then try even
better, or go and
> drink lots and lots of alcohol. If that does not work
then do both
> together XX.
>

Usage of sed question for experts

I need a little help with sed. Basically, I need to parse out selections from the output of hddtemp so conky can display some hdd temps for me. I have hddtemp in daemon mode so A simple 'nc localhost 7634' displays the following:
$ nc localhost 7634
|/dev/sg1|ST3640323AS|31|C||/dev/sg2|ST3640323AS|31|C||/dev/sg3|WDC WD1001FALS-00J7B1|36|C||/dev/sg4|WDC WD7501AALS-00J7B0|32|C||/dev/sda|ST3640323AS|31|C||/dev/sdb|ST3640323AS|31|C||/dev/sdc|WDC WD1001FALS-00J7B1|36|C||/dev/sdd|WDC WD7501AALS-00J7B0|32|C|
Just ignore /dev/sdd because it's going away soon. How can I use sed to extract the temps of /dev/sda and /dev/sdb and /dev/sdc so I can insert an appropriate line to my .conkyrc?
I have can do this long hand using the '-cut -cx-y' command:
sda:$color ${execi 300 nc localhost 7634 | cut -c50-51} C
...but I think a series of sed statements would be more power (one to delete everything up to the temp and one to delete everything after the temp) particularlly if the HDD gets swapped out which would change the number of characters in the line.
Thoughts are welcomed and thanks!

@Procyon - thank you for the code. I added a dollar sign to before the brackets and it works great.
Screenshot and .conkyrc for anyone interested:
# for this to work you need both lm-sensors and hddtemp
# get both from main repos
# set to yes if you want Conky to be forked in the background
background no
#cpu_avg_samples 2
#net_avg_samples 2
own_window yes
own_window_type override
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
out_to_console no
# X font when Xft is disabled, you can pick one with program xfontsel
#font 7x12
#font 6x10
#font 7x13
#font 8x13
#font 7x12
#font *mintsmild.se*
#font -*-*-*-*-*-*-34-*-*-*-*-*-*-*
#font -artwiz-snap-normal-r-normal-*-*-100-*-*-p-*-iso8859-1
# Use Xft?
use_xft yes
# Xft font when Xft is enabled
xftfont Bitstream Vera Sans Mono:size=8
#own_window_transparent no
#own_window_colour hotpink
# Text alpha when using Xft
xftalpha 0.8
on_bottom yes
# Update interval in seconds
update_interval 2
# Create own window instead of using desktop (required in nautilus)
#own_window no
# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes
# Minimum size of text area
#minimum_size 250 5
maximum_width 258
# Draw shades?
draw_shades no
# Draw outlines?
draw_outline no
# Draw borders around text
draw_borders no
# Stippled borders?
stippled_borders 10
# border margins
border_margin 4
# border width
border_width 1
# Default colors and also border colors
default_color white
default_shade_color white
default_outline_color white
# Text alignment, other possible values are commented
#alignment top_left
#minimum_size 10 10
#alignment top_right
alignment bottom_left
#alignment bottom_right
# Gap between borders of screen and text
gap_x 12
gap_y 37
# Add spaces to keep things from moving about? This only affects certain objects.
use_spacer no
# Subtract file system buffers from used memory?
no_buffers yes
# set to yes if you want all text to be in uppercase
uppercase no
TEXT
${color #ddaa00}$nodename$color
$sysname $kernel on $machine
${color lightgrey}Uptime:$color $uptime ${color lightgrey}- Load:$color $loadavg${color lightgrey}
RAM Usage:$color $memperc% or $mem of $memmax${color lightgrey}
Swap Usage:$color $swapperc%${color lightgrey}
$color$stippled_hr${color lightgrey}
Intel Xeon X3360 @ $color${freq_g} GHz${color lightgrey}
Average CPU History:
${color black}${cpugraph 000000 5000a0}${color lightgrey}
${color lightgrey}Core0:$color ${execi 8 sensors | grep -A 1 'Core 0' | cut -c15-16 | sed '/^$/d'} C${color grey} @$color ${cpu cpu1}% ${alignr}${cpubar cpu1 6,120}
${color lightgrey}Core1:$color ${execi 8 sensors | grep -A 1 'Core 1' | cut -c15-16 | sed '/^$/d'} C${color grey} @$color ${cpu cpu2}% ${alignr}${cpubar cpu2 6,120}
${color lightgrey}Core2:$color ${execi 8 sensors | grep -A 1 'Core 2' | cut -c15-16 | sed '/^$/d'} C${color grey} @$color ${cpu cpu3}% ${alignr}${cpubar cpu3 6,120}
${color lightgrey}Core3:$color ${execi 8 sensors | grep -A 1 'Core 3' | cut -c15-16 | sed '/^$/d'} C${color grey} @$color ${cpu cpu4}% ${alignr}${cpubar cpu4 6,120}${color grey}
$color$stippled_hr${color lightgrey}
Thermal Monitors:${color lightgrey}
${color grey} GPU:$color ${execi 8 nvclock -T | grep 'GPU t' | cut -c21-22} C${color grey} MB:$color ${execi 8 sensors | grep temp3 | cut -c15-16} C
${color grey} sda:$color ${execi 300 nc localhost 7634 | sed 's/^|//;s/|$//;s/||/\n/g' | sed -n '/sda/{s/.dev.sd.//;s/|[^|]*|//;s/|.*//p}'} C ${color grey}sdb:$color ${execi 300 nc localhost 7634 | sed 's/^|//;s/|$//;s/||/\n/g' | sed -n '/sdb/{s/.dev.sd.//;s/|[^|]*|//;s/|.*//p}'} C${color grey} sdc:$color ${execi 300 nc localhost 7634 | sed 's/^|//;s/|$//;s/||/\n/g' | sed -n '/sdc/{s/.dev.sd.//;s/|[^|]*|//;s/|.*//p}'} C${color grey}
$stippled_hr${color light grey}
${color lightgrey}Processes:$color $processes ${color grey}Running:$color $running_processes
${color}Name PID CPU% MEM%
${color #ddaa00} ${top name 1} ${top pid 1} ${top cpu 1} ${top mem 1}
${color lightgrey} ${top name 2} ${top pid 2} ${top cpu 2} ${top mem 2}
${color lightgrey} ${top name 3} ${top pid 3} ${top cpu 3} ${top mem 3}
${color}Mem usage
${color #ddaa00} ${top_mem name 1} ${top_mem pid 1} ${top_mem cpu 1} ${top_mem mem 1}
${color lightgrey} ${top_mem name 2} ${top_mem pid 2} ${top_mem cpu 2} ${top_mem mem 2}
${color lightgrey} ${top_mem name 3} ${top_mem pid 3} ${top_mem cpu 3} ${top_mem mem 3}
Last edited by graysky (2009-04-09 18:34:48)

Oracle Block Size - question for experts

Hi ,
For years i thought that my system block size was 8K.
Lately due to an HPUX Bug i found that the file system block size is gust .... 1K
(HP DocId: DCLKBRC00006913 fstyp(1m) returns unexpected block size (f_bsize) for VXFS )
My instance is currently 10204 but previously was 7.3 --> 8 --> 8174 --> 10204.
Since its old instance its block size is gust 4kb.
We are planing to create new file system block size of 8k.
The instance size is about 2 TB.
Creating the whole database with 8 kb is impossible since its 24*7 instance.
Do you think that i sould move gust few important tables to a new tablespace with 8k block size , or should i leave it with 4 kb ?
Thanks

Given that your Oracle Database Block_Size (4K) is a multiple of the FileSystem Block_Size (1K), there should be no inherent significant issue, as such.
Yes, it would have been nice to have an 8KB Oracle Database Block_Size but whether you should recreate your FileSystems to 8KB is a difficult question. There would be implications on PreFetch that the OS does and on how the underlying Storage (must be a SAN, I presume) handles those requests.
A thorough test (if you can setup a test environment for 2TB such that it does NOT share the same HW, doesn't complicate PreFetches in the existing SAN) would be well adviced.
Else, check with HP and Veritas support if there are known issues and/or any Desupport plans for this combination ?!
Oracle, obviously, would have issues with Index Key Length sizes if the Block Size is 4KB. Presumably you do not need to add any new indexes with very large keys.
Having said that, you would have read all those posts about how Oracle doesn't (or really does ?) test every different block-size ! However, Oracle had, before 8i, been using 2K and 4K block sizes. Except that the new features (LMT, ASSM etc) may not have been well tested.
Since you upgraded from 7.3 in place without changing the Block_Size, I would venture to say that your database is still using Dictionary Managed and Manual Allocation and Segment Space Management Manual ?
Hemant K Chitale
http://hemantoracledba.blogspot.com

Runtime error - question for experts

hello experts,
I was trying to debug a program for unicode compatibility, and when I finally thought I had finished it.
This runtime error shows up
"Error analysis |
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_READ_SRC_LINE_TOO_LONG', was
not caught in
procedure "K_KKB_FIELDCAT_MERGE" "(FUNCTION)", nor was it propagated by a
RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
There was an attempt to read program "ZPM04_UPDATE_INFOREC_FROM_PO" from the
database.
The READ REPORT statement allows you to copy a program text into an
internal table. The occupied line length in the program text must not
exceed the width of the internal table.
The internal table "\FUNCTION=K_KKB_FIELDCAT_MERGE\DATA=L_ABAP_SOURCE[]" is 72
characters wide. The program line is
| 78 characters wide."
because the error occured in standard SAP programs, I am at loss..
Please give your suggestions.
Goldie.

You need to Change the setting in the program ZPM04_UPDATE_INFOREC_FROM_PO, not in the program SAPLSBKH.
SAPLSBKH read the Report ZPM04_UPDATE_INFOREC_FROM_PO and it gets error because some lines in the ZPM04_UPDATE_INFOREC_FROM_PO are longer than 72 characters.
As suggested by other SDN members you have to follow this steps:
Go to SE38.
Enter ZPM04_UPDATE_INFOREC_FROM_PO and change.
Utilities > Setting
In the Editor Tab, set the checkbox "Downword Compatilbe line Length (72)". You can find out this checkbox in the last section of the Editor tab.
Press Enter.
In the Pop-Up, Say "YES" for the line breaks.
Regards,
Naimesh Patel

Some question for experts !! Urgent

I have following queries:
1) When a copy fucntion fails, if i get an error message saying a variable could not be determined. Can i change the text for the same to make it user friendly.
2) If i have a fucntion geeting executed before display of layout...i.e it executes and on success layout gets diaplyed. Now if the fucntion fails, ideally, we get error message and layout is nt displayed. can i have soem check so that it displays error message and also show layout. fucntion executed is a copy fucntion and if there is nothign to be copied it would fail but that should not stop the displ of layout for users.
3) can we ever highlight a row in layout with diff color and after soem function execution the highlight goes away...
please help me on this urgently..expert opinion is awaited

1. the error message could be changed in the abap code
2. why dont you have the layout showing first before executing the function. [...assuming that you're using WAD to configure].
You can set the "characteristics" to show in the layout even wthout data by setting its properties in the Query designer to show "master data". this you do by clicking on the characteristic and changing the setting to Master data in Advanced tab.
3. Having colors in rows can be made possible if you're using Report Designer. [i.e pulling the query into report designer].
Srikant

Simple Question for R/3

Hi, Alls
Question1, what roles and authroz. I need for CCMS alerts in R3 system and auto-reaction method seutp
Question2, Will I have to configure SMTP first for CCMS (Auto-re-action method)
Question3, Sould I need to change any profile for that ?
Please give me simple answer not any URL thanks
Thanks in Advanced

Read,
http://help.sap.com/saphelp_nw2004s/helpdata/en/90/4e313f8815d036e10000000a114084/frameset.htm
regards
Juan

COWBHUWE : simple question for experts

Similar Messages

Maybe you are looking for